Discover the Essential Steps for Editing a Music Video in This Guide. Learn About Aspect Ratio and the First Cut Process to Create a Visually Captivating Video

Are you planning to edit your music video? Do you need on out how to edit your first music video draft? Editing a music video is a creative task but can be challenging.

One of the key elements of this process is selecting the aspect ratio and making the first cut. In this blog, we will explore these steps in detail, providing important tips and tricks. Whether you’re a beginner or an experienced editor, get ready to take your music video to the next level. Let’s get started.

Which software will you need?

As we have a lot of software in the market, we must select the right software for high-quality editing. Wondershare Filmora is an amazing video editing software. It offers a ton of video editing tools. You can add special effects, transitions, and more to make your music video captivating.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Tips for Choosing Location & Scheduling Music Video

Making viral music videos is everyone’s dream; what if you get exact tips to follow before shooting your music video to make it high-ranked? Obviously, it’ll be a treat for you!

Planning and preparing before the shoot is the key to making a music video successful. You can only achieve this after location scouting and emerging with the best one. And scheduling for big projects before the day is more important. Let’s directly move towards the things to consider before shooting!

Location scouting

The pleasant and eye-catchy location always makes your music video trending or flopping. You should first go with your budget and then come up with location ideas. In the upcoming tip, we will use 3lau’s song “Tokyo” as an example.

If you are going with large projects, you need to consider the following requirements!

1. Availability of electricity

You need rig lights and a large lighting setup to make your video more glow and give them aesthetic vibes. For this, make sure you choose a location where light is readily available.

2. Separate room

During shooting for big projects, you need room to store all gear and sensitive equipment in one place for many days.

3. Check the size

The foremost thing in choosing the location is to check the Height and Width of the studio. They should be enough to rig the lights in the studio easily and place every required thing in a decided space.

For Example, while shooting a 3lau song, there is a need for a bus to come into the studio easily, but there is an issue in entering the bus due to height issues of the door. Due to this, the director changed the location at the spot to sort out this issue.

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

Alternate Ways of Location Scouting

If you don’t have enough budget to get a studio space, then you can easily shoot by selecting spaces that are in your use or available. These are the following locations you should regard!

Location 1. Your Home

You should go with the space available at your home to shoot, such as: on couches or in the bedroom, to give a good impression to your music video.

Location 2. Office Space

You can also make scenes of your music video in office space to better describe the work in the video.

Location 3. Outdoor Locations

For better daylight and illustrations in the music video, you can go with the outdoor location, which is free of cost.

Location 4. Public Places

Public places are easily available and have many options, such as public parks, playgrounds, bridges, and public parking.

Note: During public shooting, ensure that the space is empty, and there should be no interruption of the public in filming the shots.

The weather is also a major factor when shooting a video, which you must check before the shoot days. After selecting and scouting the location, now it’s time to make a schedule which you’ll get in hand in the below lines!

Scheduling for the Music Video

If you have a big project and more scenes to shoot, it’s better to make a whole plan about each and everything. You have to make a schedule of using even a single light at a specific time and space. The following are the main considerations you should take care of!

1. Pre-Rig Day

You need to come to the setup before the filming day to check the main things like electricity, measure exact spaces, check the lightning setup, loaded everything such as the bus, crew, and gears.

2. A Call Sheet

A call sheet is a daily shot list given to the cast and crew to follow the timelines, and it contains the phone number of everyone, their location, and the time to arrive on set. It also includes the nearest hospital, sunset, and sun-rising timing.

It consists of one to two pages according to shoot days and has a plan of everything that happens after the Pre-Rig day.

Note: When you wrap up for day 1, you have another call sheet for day 2, day 3, and so on!

3. Do Planning

You need to work efficiently and smartly to maintain everything according to the plan. You can cut the filming into halves to have a better lighting setup and character availability. On the shot day, you must change the lighting and rigging setup as little as possible.

Examples

On day 1 of the Tokyo song, the filming is done in two halves; the first half day goes towards filming everything in the bus, and the other half day, there is a shoot of everything outside the bus.

While in day 2, there is a filming of every memory. For this, there are setups of rooms and homes for making perfect shots according to the requirements of a music video.

4. Take No Stress

You should not blow up and take stress during shoot day because it’ll obviously cause chaos in every little scene and give a bad impression to the music video. You just should work hard and get all done.

Conclusion

After checking and following the above tips for location scouting and scheduling, you’ll obviously come up with an amazing filming setup and music video. There is no need to worry, just get the whole planning and then do all scenes one after the other patiently.

Filming with people is not always bulky and flopping, but if you have a cooperative team and follow all the timelines of shooting. Then you’ll rock the music video!

A cross-platform for making videos anywhere for all creators!

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

Alternate Ways of Location Scouting

If you don’t have enough budget to get a studio space, then you can easily shoot by selecting spaces that are in your use or available. These are the following locations you should regard!

Location 1. Your Home

You should go with the space available at your home to shoot, such as: on couches or in the bedroom, to give a good impression to your music video.

Location 2. Office Space

You can also make scenes of your music video in office space to better describe the work in the video.

Location 3. Outdoor Locations

For better daylight and illustrations in the music video, you can go with the outdoor location, which is free of cost.

Location 4. Public Places

Public places are easily available and have many options, such as public parks, playgrounds, bridges, and public parking.

Note: During public shooting, ensure that the space is empty, and there should be no interruption of the public in filming the shots.

The weather is also a major factor when shooting a video, which you must check before the shoot days. After selecting and scouting the location, now it’s time to make a schedule which you’ll get in hand in the below lines!

Scheduling for the Music Video

If you have a big project and more scenes to shoot, it’s better to make a whole plan about each and everything. You have to make a schedule of using even a single light at a specific time and space. The following are the main considerations you should take care of!

1. Pre-Rig Day

You need to come to the setup before the filming day to check the main things like electricity, measure exact spaces, check the lightning setup, loaded everything such as the bus, crew, and gears.

2. A Call Sheet

A call sheet is a daily shot list given to the cast and crew to follow the timelines, and it contains the phone number of everyone, their location, and the time to arrive on set. It also includes the nearest hospital, sunset, and sun-rising timing.

It consists of one to two pages according to shoot days and has a plan of everything that happens after the Pre-Rig day.

Note: When you wrap up for day 1, you have another call sheet for day 2, day 3, and so on!

3. Do Planning

You need to work efficiently and smartly to maintain everything according to the plan. You can cut the filming into halves to have a better lighting setup and character availability. On the shot day, you must change the lighting and rigging setup as little as possible.

Examples

On day 1 of the Tokyo song, the filming is done in two halves; the first half day goes towards filming everything in the bus, and the other half day, there is a shoot of everything outside the bus.

While in day 2, there is a filming of every memory. For this, there are setups of rooms and homes for making perfect shots according to the requirements of a music video.

4. Take No Stress

You should not blow up and take stress during shoot day because it’ll obviously cause chaos in every little scene and give a bad impression to the music video. You just should work hard and get all done.

Conclusion

After checking and following the above tips for location scouting and scheduling, you’ll obviously come up with an amazing filming setup and music video. There is no need to worry, just get the whole planning and then do all scenes one after the other patiently.

Filming with people is not always bulky and flopping, but if you have a cooperative team and follow all the timelines of shooting. Then you’ll rock the music video!

How to Make A Slideshow Video (+Filmora Techniques)

You have taken photos and videos all over your trip. Showing them to your friends and family can be a hassle if you have a lot of pictures. Viewing them all at once is possible by creating a slideshow video.

The slideshow video combines all the memories in one place. To make one on your own, we prefer just one best UI editing tools, Wondershare Filmora.

Before we create a slideshow, ensure to learn the basics of the slideshow video. Then, scroll below to get more!

Part 1. What Is a Slideshow Video?

A slideshow video is a video that combines your photos and videos to create a montage. This slideshow can be used as a collection of memories you can watch whenever you like.

You might have a photo album lying around somewhere in your house. A slideshow video can act like a modern-day photo album. But instead of photos, you can also add videos and create a monument of your precious memories.

Modern-day content creators on Youtube and other platforms can use a slideshow method to create short recap videos of their travels.

Part 2. What Are Some of the Uses of Slideshow Videos?

A slideshow video can be a great way to summarize all the moments of a marriage ceremony, graduation event, etc. And the list goes on and on.

• A wedding ceremony
• Anniversary recording
• A graduation ceremony
• A birthday party
• Your pet
• Your friends
• Your family
• A trip that you went on

Part 3. What Are the Benefits of a Slideshow?

There are many benefits to creating a slideshow video.

A long-lasting memory

Creating a slideshow video can be a digital reminiscent, allowing you to hold a precious video with your friends and family. Apart from physical portraits, a slideshow video will be a digital backup for your memories that you can watch in the future.

Easy to save and share

Since a video slideshow is a digital content, typically with an extension .mp4, .mov, etc., you can watch it whenever and wherever you want. Moreover, you can conveniently send it to the person who spent the time and shares the same memories with you.

Part 4. What Will You Need To Make a Slideshow?

To create an attractive slideshow video, you must fulfill the following requirements.

1. Good Quality Photos

To create a good slideshow, you must have good-quality photos with good resolution. Always take pictures with a good-quality camera or a mobile phone whenever you want to create a slideshow. Using filters in the editing software can disrupt the quality of your slideshow.

2. Video Clips

The slideshow is always combined with videos and photos. After taking good-quality images, remember always to record short video clips you can add between your pictures.

3. A Good Video Editor - Wondershare Filmora

To edit a slideshow video, you will need editing software. There’s no better tool to do the job than Wondershare Filmora . Wondershare Filmora enables you to make creative and appealing videos. It has a very engaging system UI that allows even novice users to get the hang of it quickly. You will learn how to make a slideshow in a few simple steps.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Let’s start with the step-by-step instructions for making a slideshow video now that you know the requirements for generating a slideshow.

Part 5. Step-by-Step Guide to Creating a Slideshow Video

Utilizing filmora will reduce your workload while producing quality work. Follow the below step-by-step guide to make your slideshow video instantly!

Step1 Download Wondershare Filmora

Wondershare Filmora will provide the working platform. Follow the below steps to download it:

• First, install the Wondershare Filmora.
• Then, launch this application on your PC or Mac

Let’s proceed to edit our video after downloading the Wondershare Filmora software. Continue reading to find out how to begin the editing process.

Step2 Import your Photos and Videos

Importing your videos and pictures to Filmora’s media panel is best to have them all in one folder. Therefore, when you open Wondershare Filmora, you will notice the main import window in the top left corner.

• Click in the center of the import window upon the import icon.
• Browse from the PC library to where your target Videos and Photos are stored.
• Please select the required videos and photos and Open

Your next step will be to add the imported videos and images to the timeline.

Step3 Add your Photos and Videos to the Timeline

When you have multiple videos and photos, you can add all of them simultaneously. Or you can also add them one by one wherever you need. Follow the steps mentioned:

• Right-click on the photo or video you want.
• Keep holding the Right-click and drag it down to the timeline.

Now that we have imported your photos and videos into the timeline, it is time to align and add text.

Step4 Add the Title

To create an attractive slideshow, you will need to add a title before the start of the video. Doing so will allow you to gain more viewers and audiences.

Add a Black Screen

The black screen will eventually act like a canvas to give your title a good look. To add a black screen, follow the steps mentioned:

• Click on the media icon from the bar above the import window.
• You will notice many tabs on the left-hand side under a drop-down bar.
• Scroll below to find the sample media
• Download the black color if it is not downloaded already.
• Click and drag it down below to the start of your video.

Add a Title Tile

Now that we have our canvas, we will now add the title. Above the import media library, there will be a Title icon.

• Click on the title icon, and select the title that you want for your video by browsing and scrolling down.
• For this purpose, we will use a simple title tile called “Title 29.”

Note: You can find the same title by scrolling, browsing, or searching in the search bar above the import library.

• Click and drag the title onto the black screen that we added.
• Double-click the title to open its settings.
• Here you can type in the text that you want.

You can also change its font. When you click on the font bar, a drop-down option will pop up, and you choose whichever you like.

• Change the animation of the text title from the top left corner animation

Change The Timing of The Title

You can also adjust the timing of the title by below steps:

• Click on the advanced option in the bottom right corner, and settings will pop up.
• Find the title bar and drag it to the right side to increase the timing of the title.

After adding the title, it’s time to go with fading effect as shown below!

Step5 Add a Fade effect

You can also add a fade transition to the start of your video. It will blend the title with the first clip. Follow the steps mentioned to add the transition effects:

• Search the Fade option from the Transitions tab above the import window

Note: A fade transition will allow your title to fade into the first clip creating a visually pleasing effect.

• Download the Fade transition and drag it between the Black screen and the first clip.

Now that we have added a transition, it is time to move on to our music!

Step6 Add The Music

You can add your music to the slideshow from your PC library, but make sure you have the music rights. It is better to use stock audio by following the steps:

• Click on the Audio icon on the bar above the import window, and the list will pop up.
• Please browse the library to find music that best suits your video and download it.
• Then add it to the timeline’s audio track.

Add Beat Detection

To match your video clips properly with the music, so it remains in sync, you can adjust it with the beat of the music. To add beat detection, follow the steps mentioned:

• Right-Click on the audio that you selected in the audio library.
• You will see a pop-up list, and in the options, you will see Beat detection.
• Click on Beat detection.

• Then click on the audio and drag it below on the timeline.

Match The Video With The Audio Markers

To have the full advantage of beat detection, you must adjust your videos and photos to the markers. Follow the steps mentioned below to do so:

• Check that the video clips are in sync with the marker on the audio.
• For this, drag one video end to a marker or as many videos as you want.
• Ultimately, you will create a timeline in which your videos sync with the audio beat.

After syncing your videos and photos to the audio, it is time to move on to the scaling and background blur.

Step7 Scale and Blur The Background

Now, some of the pictures you have added must-have black borders. It usually means that your image is shorter than the aspect ratio.

If you leave the picture/photo as it is, the black borders will make it look shorter and out of proportion. As a result, it gives a generally poor look, as shown below.

To counter this problem, follow some easy steps:

• Double-click on the picture with black borders, and it will open the settings list.
• Go into the Transform Here you can see multiple settings.
• Increase the size of your photo to match the aspect ratio.

Add a Background Blur Effect

In some cases where you have taken a portrait photo where the picture is vertical, it ultimately stays out of proportion to the aspect ratio.

Note: Simply scaling the image to match the aspect ratio size is not sensible in this case. Doing so will hide the many pretty features of a portrait.

To counter this problem, you can add a blur effect. This effect will turn your background blur, matching the aspect ratio. Follow the steps mentioned below:

• Click on the Effects tab above the import window and search for Blur.
• Download the blur effect that suits you best and then drag the blur effect above your photo in the timeline.

You will notice the background turn to a blur in the main play screen.

Step8 Add a Transition

You can also add a transition effect to spice up things. It can get bland when your video or photo changes from one to another. To create a good slideshow video, you can add a transition effect by following the steps mentioned below:

• Click on the Transition icon above the import window.
• Browse the library until you find a transition you like, then download one.
• Click on the transition and drag it between the clips.

Adjust The Duration and Placement of The Transition

Now it’s time to adjust the duration and placement of the transition. For this, you can follow the steps mentioned below:

• Double-click on the transition effect, and it will open the settings list.
• You can adjust the duration by setting the timer as per your requirement.

Note: If other transitions are added to the timeline, you can adjust them by clicking Apply to all.

When you have adjusted the slideshow transitions, it is time to move on to the effects and filters.

Step9 Add the Effects and Filters

If you create a slideshow video of your trip to a historical place. You can add a Vintage filter to your video to give it that vintage tint. Follow the steps mentioned below:

• Head over to the Effects tab, where the effects library will open up
• Select any effect and download
• Click on the effect and drag it to drop in the timeline.

Combining a vintage effect with a dreamy glow will make your video pop up even more. To add a nostalgic glow to your video, follow the steps:

• Click on the effects and search for Glow in the search bar.
• Click and drag the glow effect above the timeline and ensure the effect is in the separate video timeline.
• Ensure the effect is applied to every photo and video.
• Double-click on the effect, and settings will open in the import window.
• Then, you can adjust the radius and opacity of the video. Adjust as you desire.

We are almost done. Let us now move toward our outro!

Step10 Create an Outro

The steps we will do will be similar to the ones we did initially. As we are creating, we will again need a canvas. Follow the steps mentioned below:

• Head to the media icon on the bar and scroll until you see the sample media tab.
• In the sample color option, drag and drop the black color at the end of your video.

Add an Outro Transition

To finalize things, add a transition effect at the end of the clip by these steps:

• In the Transition tab, search for the Fade effect.
• Drag and drop the Fade effect between your last video clip and the Black screen.

Fade out The Audio

If the audio suddenly ends at the end of your slideshow, it will create a bitter effect. Therefore, you should always fade out audio at the end of the video. To do this, follow the steps mentioned:

• Double-click on the audio in the timeline, and the settings list will pop up.
• On the top section of the import window, you will notice fade options.
• In the fade-out bar, drag it to the side to set your fade-out timer.

You can show your friends and family the slideshow or upload it to Youtube. Play the Slideshow Video from the beginning to see the changes.

Conclusion

By the steps mentioned above, you can create a slideshow video. Give every moment a chance to align everything on one side! The slideshow will also save your device space by aligning everything in one video.

Free Download For macOS 10.14 or later

Let’s start with the step-by-step instructions for making a slideshow video now that you know the requirements for generating a slideshow.

Part 5. Step-by-Step Guide to Creating a Slideshow Video

Utilizing filmora will reduce your workload while producing quality work. Follow the below step-by-step guide to make your slideshow video instantly!

Step1 Download Wondershare Filmora

Wondershare Filmora will provide the working platform. Follow the below steps to download it:

• First, install the Wondershare Filmora.
• Then, launch this application on your PC or Mac

Let’s proceed to edit our video after downloading the Wondershare Filmora software. Continue reading to find out how to begin the editing process.

Step2 Import your Photos and Videos

Importing your videos and pictures to Filmora’s media panel is best to have them all in one folder. Therefore, when you open Wondershare Filmora, you will notice the main import window in the top left corner.

• Click in the center of the import window upon the import icon.
• Browse from the PC library to where your target Videos and Photos are stored.
• Please select the required videos and photos and Open

Your next step will be to add the imported videos and images to the timeline.

Step3 Add your Photos and Videos to the Timeline

When you have multiple videos and photos, you can add all of them simultaneously. Or you can also add them one by one wherever you need. Follow the steps mentioned:

• Right-click on the photo or video you want.
• Keep holding the Right-click and drag it down to the timeline.

Now that we have imported your photos and videos into the timeline, it is time to align and add text.

Step4 Add the Title

To create an attractive slideshow, you will need to add a title before the start of the video. Doing so will allow you to gain more viewers and audiences.

Add a Black Screen

The black screen will eventually act like a canvas to give your title a good look. To add a black screen, follow the steps mentioned:

• Click on the media icon from the bar above the import window.
• You will notice many tabs on the left-hand side under a drop-down bar.
• Scroll below to find the sample media
• Download the black color if it is not downloaded already.
• Click and drag it down below to the start of your video.

Add a Title Tile

Now that we have our canvas, we will now add the title. Above the import media library, there will be a Title icon.

• Click on the title icon, and select the title that you want for your video by browsing and scrolling down.
• For this purpose, we will use a simple title tile called “Title 29.”

Note: You can find the same title by scrolling, browsing, or searching in the search bar above the import library.

• Click and drag the title onto the black screen that we added.
• Double-click the title to open its settings.
• Here you can type in the text that you want.

You can also change its font. When you click on the font bar, a drop-down option will pop up, and you choose whichever you like.

• Change the animation of the text title from the top left corner animation

Change The Timing of The Title

You can also adjust the timing of the title by below steps:

• Click on the advanced option in the bottom right corner, and settings will pop up.
• Find the title bar and drag it to the right side to increase the timing of the title.

After adding the title, it’s time to go with fading effect as shown below!

Step5 Add a Fade effect

You can also add a fade transition to the start of your video. It will blend the title with the first clip. Follow the steps mentioned to add the transition effects:

• Search the Fade option from the Transitions tab above the import window

Note: A fade transition will allow your title to fade into the first clip creating a visually pleasing effect.

• Download the Fade transition and drag it between the Black screen and the first clip.

Now that we have added a transition, it is time to move on to our music!

Step6 Add The Music

You can add your music to the slideshow from your PC library, but make sure you have the music rights. It is better to use stock audio by following the steps:

• Click on the Audio icon on the bar above the import window, and the list will pop up.
• Please browse the library to find music that best suits your video and download it.
• Then add it to the timeline’s audio track.

Add Beat Detection

To match your video clips properly with the music, so it remains in sync, you can adjust it with the beat of the music. To add beat detection, follow the steps mentioned:

• Right-Click on the audio that you selected in the audio library.
• You will see a pop-up list, and in the options, you will see Beat detection.
• Click on Beat detection.

• Then click on the audio and drag it below on the timeline.

Match The Video With The Audio Markers

To have the full advantage of beat detection, you must adjust your videos and photos to the markers. Follow the steps mentioned below to do so:

• Check that the video clips are in sync with the marker on the audio.
• For this, drag one video end to a marker or as many videos as you want.
• Ultimately, you will create a timeline in which your videos sync with the audio beat.

After syncing your videos and photos to the audio, it is time to move on to the scaling and background blur.

Step7 Scale and Blur The Background

Now, some of the pictures you have added must-have black borders. It usually means that your image is shorter than the aspect ratio.

If you leave the picture/photo as it is, the black borders will make it look shorter and out of proportion. As a result, it gives a generally poor look, as shown below.

To counter this problem, follow some easy steps:

• Double-click on the picture with black borders, and it will open the settings list.
• Go into the Transform Here you can see multiple settings.
• Increase the size of your photo to match the aspect ratio.

Add a Background Blur Effect

In some cases where you have taken a portrait photo where the picture is vertical, it ultimately stays out of proportion to the aspect ratio.

Note: Simply scaling the image to match the aspect ratio size is not sensible in this case. Doing so will hide the many pretty features of a portrait.

To counter this problem, you can add a blur effect. This effect will turn your background blur, matching the aspect ratio. Follow the steps mentioned below:

• Click on the Effects tab above the import window and search for Blur.
• Download the blur effect that suits you best and then drag the blur effect above your photo in the timeline.

You will notice the background turn to a blur in the main play screen.

Step8 Add a Transition

You can also add a transition effect to spice up things. It can get bland when your video or photo changes from one to another. To create a good slideshow video, you can add a transition effect by following the steps mentioned below:

• Click on the Transition icon above the import window.
• Browse the library until you find a transition you like, then download one.
• Click on the transition and drag it between the clips.

Adjust The Duration and Placement of The Transition

Now it’s time to adjust the duration and placement of the transition. For this, you can follow the steps mentioned below:

• Double-click on the transition effect, and it will open the settings list.
• You can adjust the duration by setting the timer as per your requirement.

Note: If other transitions are added to the timeline, you can adjust them by clicking Apply to all.

When you have adjusted the slideshow transitions, it is time to move on to the effects and filters.

Step9 Add the Effects and Filters

If you create a slideshow video of your trip to a historical place. You can add a Vintage filter to your video to give it that vintage tint. Follow the steps mentioned below:

• Head over to the Effects tab, where the effects library will open up
• Select any effect and download
• Click on the effect and drag it to drop in the timeline.

Combining a vintage effect with a dreamy glow will make your video pop up even more. To add a nostalgic glow to your video, follow the steps:

• Click on the effects and search for Glow in the search bar.
• Click and drag the glow effect above the timeline and ensure the effect is in the separate video timeline.
• Ensure the effect is applied to every photo and video.
• Double-click on the effect, and settings will open in the import window.
• Then, you can adjust the radius and opacity of the video. Adjust as you desire.

We are almost done. Let us now move toward our outro!

Step10 Create an Outro

The steps we will do will be similar to the ones we did initially. As we are creating, we will again need a canvas. Follow the steps mentioned below:

• Head to the media icon on the bar and scroll until you see the sample media tab.
• In the sample color option, drag and drop the black color at the end of your video.

Add an Outro Transition

To finalize things, add a transition effect at the end of the clip by these steps:

• In the Transition tab, search for the Fade effect.
• Drag and drop the Fade effect between your last video clip and the Black screen.

Fade out The Audio

If the audio suddenly ends at the end of your slideshow, it will create a bitter effect. Therefore, you should always fade out audio at the end of the video. To do this, follow the steps mentioned:

• Double-click on the audio in the timeline, and the settings list will pop up.
• On the top section of the import window, you will notice fade options.
• In the fade-out bar, drag it to the side to set your fade-out timer.

You can show your friends and family the slideshow or upload it to Youtube. Play the Slideshow Video from the beginning to see the changes.

Conclusion

By the steps mentioned above, you can create a slideshow video. Give every moment a chance to align everything on one side! The slideshow will also save your device space by aligning everything in one video.

How to Make Strobe Light Text Effect?

In video editing, professionals put in different types of effects to create a unique feel to the visuals. In fact, there are different styles available that you can use in videos to create a specific feel in the viewers—case in point, strobe lights.

This technique involves a series of intense short flashes of light in sections of the clip that create a suspenseful or thrilling ambiance, amping up the horror feel in viewers and more. You might have seen many examples of this in horror movies, thrillers, suspense or action-filled movies, sci-fi films, etc. Similarly, adding the effect to the titles gives a cinematic feel to them.

As a film or video editor, are you interested in adding this effect to your own project as well? Luckily, you do not need significant technical know-how or invest in different types of high-grade equipment to manage it - Wondershare Filmora allows users to add the effect easily in the titles. Want to know how? Read ahead.

Launch the software first

Of course, before you can begin adding the effect to your video, you must have the software. The downloading process for Wondershare Filmora 11 is very straightforward as long as you have a Mac or Windows PC.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

First, visit the official website to download the software. The Download button at the top of the screen or the description box is available to click on. That will instantly allow the Filmora installer to download into your device.

Double-click on the installer from your notifications or browser downloads section, then click Install. Allow the prompt for permission approval when it comes up, and the installation process will begin. This would take a little bit of time, and you can tap on the Start Now button at the last window that opens.

Add the title

The editor will open automatically next. You have to tap on the Create New Project button to access the editing screen, tap on the Titles tab, and choose the Default Title. If you prefer another version, browse through the different title presets available as options and download the one you prefer.

Then, drag the title from this section and drop it into the editing timeline. Double-click on the title in the timeline to open the title editing window. Insert the text you want to add as the title in the text field and adjust the size, font, and other font modifications here.

Edit the title and click snapshots

Then, you should drag the title clip you added to the timeline to an upper section and click on the Media tab following that. Then, choose the Sample Color option from the listed menu and tap on the Black color choice. After doing so, drag it down to the timeline onto the track under the Default Title clip you added and moved up.

Consequently, click on the Snapshot icon at the right side of the toolbar just above the timeline. This will take a screenshot of the black color picture you added second.

Then you should double-click on the original Default Title you added and start editing your title text once more. This time, add the term you want to appear under your original title here. Adjust the font for it as something other than the original one. For example, if you put Motor Oil 1937 M54 as the first title font, set the second as Montserrat SemBold. Make more adjustments, if necessary, to the font. Then, retake a snapshot of it.

Insert the snapshots

Remove the two title clips you added to the timeline. You have to work with the Snapshots you took now.

It is possible that you will not see the Snapshots saved in your media folder. In this case, tap on the “Click here to insert media” section and go to the device library. It will open in the Wondershare Filmora folder; if not, search for it and access it.

In the folder, double-click on the Snapshot folder. Choose both of the Snapshots you saved right now from here and tap on Open to import them into Filmora.

Import additional music and background visuals

After you have imported the snapshots to Filmora, you have to tap on the Import File option again. Go to the folder where you saved specific files like Lens flare, background video, particles, and sound effect clips. If you have these previously saved in other folders, make sure to keep them all in one folder ahead of time and open that one here.

Choose all files and click on Open to add them to the Filmora software. Now starts the process of merging them all into one cohesive effect.

Drag the files into the timeline

The background video is the first file you will drag and drop to the timeline. For the best effect, choose a flashing light background video. Next, drag the first title you edited into Track 2, right above the first one. Make sure to adjust the length of the clip to match the background video length. Repeat the same for the second snapshot, adding it above the first snapshot in the timeline.

Edit the snapshots via Chroma Key and Composting

You must hide the second snapshot you added, i.e., the one in the 3rd Track on the timeline. After that, click on snapshot 1 and tap on the Chroma Key icon in the toolbar right above the timeline.

When the Chroma Key window opens, tap on the Select Color option and go to the “More…” option. Tap on the basic white color and click on OK.

Following it, move the slider for Edge Thickness to extend it and see the preview to know if you are satisfied with the amount. Then, click on the unhide icon for the second snapshot. Right-click on it and tap on the Composting option. Under the Blending Mode parameter, change the option to Screen. The title background will remove automatically.

Press OK.

Add the sound effect

Again, you must hide the second snapshot in the timeline with the same step as before. Then, drag the sound effect to the audio track timeline next. Tap on the Play button under the Preview to see how the effect looks with the sound. Cut out the extra second of the sound effect clip to align it with the ending section of all of the other clips.

Add the initial keyframes

Choose the first snapshot in the timeline, below the second snapshot, and above the background video clip. Then, double-click on it to open the editor window and choose the Animation tab this time instead of Image.

Add the keyframe here and change the value of the Scale parameter to 400 or something high like that. In the preview, you will see that most of the font in this title is out of frame. After this, click on Rotate and turn the font to 45 degrees.

Move your playhead on this snapshot clip in the timeline by at least 1 second. Then, add another keyframe in this location by tapping the Add button. Here, reset the Scale and Rotate parameters and press the OK button to end.

Add the lens flare and particle video

Next, go back to the media section where all the files you added are present and drag your lens flare clip to the timeline, right on the track above the last one you added. Drop it here and adjust the length of it to match others if it does not show that automatically.

Above it, drag and drop the Particles video from the media files you added previously onto the track above the lens flare one. Do the same to delete the spare part by moving the play head to that point, clicking on the scissor icon, and removing the extra part.

Then, double-click on this Particles video clip on the timeline and go to the Compositing section. Tap on the Blending Mode drop-down choice and choose the Screen option. Press OK. Next, repeat the same for the lens flare video and tap the OK button.

Now, play the preview again.

Adjust the second title, again

Remember how you clicked on the hide button for the second snapshot for title 2? Now, you have to click on the unhide icon beside it.

Move the play head to the 3-second mark from the beginning. If you need clarification on this, check if the lens flare effect is beginning to start below the first title at this point. Move your playhead to that point for the second snapshot.

Here, tap on the Split icon and remove the clip’s first half. Then, double-click on the second half and go to Animation. Press the Add button to insert a keyframe here and change the scale and position of the title at this point. Move it to the placement you want, right above the lens flare. Also, drag the slider for the Opacity parameter to zero at this point.

Subsequently, move the play head to the point when the lens flare effect stop, which is around 2 seconds more. At this point, you have to add another keyframe and change the Opacity to 100.

Play the preview of the whole thing to see how the effect looks in completion.

Conclusion

Indeed, the strobe light effect in the title of movies or videos of different lengths can effectively create a heart-stopping moment on the screen. Moreover, it can work to incite a feeling of anticipation in viewers, especially with the right music beat in the backdrop.

Using Filmora will allow you to add the cinematic effect quickly and efficiently with simple, quick steps. Follow the phases mentioned in this post while trying out different variations before settling on your final shot choice.

Free Download For macOS 10.14 or later

First, visit the official website to download the software. The Download button at the top of the screen or the description box is available to click on. That will instantly allow the Filmora installer to download into your device.

Double-click on the installer from your notifications or browser downloads section, then click Install. Allow the prompt for permission approval when it comes up, and the installation process will begin. This would take a little bit of time, and you can tap on the Start Now button at the last window that opens.

Add the title

The editor will open automatically next. You have to tap on the Create New Project button to access the editing screen, tap on the Titles tab, and choose the Default Title. If you prefer another version, browse through the different title presets available as options and download the one you prefer.

Then, drag the title from this section and drop it into the editing timeline. Double-click on the title in the timeline to open the title editing window. Insert the text you want to add as the title in the text field and adjust the size, font, and other font modifications here.

Edit the title and click snapshots

Then, you should drag the title clip you added to the timeline to an upper section and click on the Media tab following that. Then, choose the Sample Color option from the listed menu and tap on the Black color choice. After doing so, drag it down to the timeline onto the track under the Default Title clip you added and moved up.

Consequently, click on the Snapshot icon at the right side of the toolbar just above the timeline. This will take a screenshot of the black color picture you added second.

Then you should double-click on the original Default Title you added and start editing your title text once more. This time, add the term you want to appear under your original title here. Adjust the font for it as something other than the original one. For example, if you put Motor Oil 1937 M54 as the first title font, set the second as Montserrat SemBold. Make more adjustments, if necessary, to the font. Then, retake a snapshot of it.

Insert the snapshots

Remove the two title clips you added to the timeline. You have to work with the Snapshots you took now.

It is possible that you will not see the Snapshots saved in your media folder. In this case, tap on the “Click here to insert media” section and go to the device library. It will open in the Wondershare Filmora folder; if not, search for it and access it.

In the folder, double-click on the Snapshot folder. Choose both of the Snapshots you saved right now from here and tap on Open to import them into Filmora.

Import additional music and background visuals

After you have imported the snapshots to Filmora, you have to tap on the Import File option again. Go to the folder where you saved specific files like Lens flare, background video, particles, and sound effect clips. If you have these previously saved in other folders, make sure to keep them all in one folder ahead of time and open that one here.

Choose all files and click on Open to add them to the Filmora software. Now starts the process of merging them all into one cohesive effect.

Drag the files into the timeline

The background video is the first file you will drag and drop to the timeline. For the best effect, choose a flashing light background video. Next, drag the first title you edited into Track 2, right above the first one. Make sure to adjust the length of the clip to match the background video length. Repeat the same for the second snapshot, adding it above the first snapshot in the timeline.

Edit the snapshots via Chroma Key and Composting

You must hide the second snapshot you added, i.e., the one in the 3rd Track on the timeline. After that, click on snapshot 1 and tap on the Chroma Key icon in the toolbar right above the timeline.

When the Chroma Key window opens, tap on the Select Color option and go to the “More…” option. Tap on the basic white color and click on OK.

Following it, move the slider for Edge Thickness to extend it and see the preview to know if you are satisfied with the amount. Then, click on the unhide icon for the second snapshot. Right-click on it and tap on the Composting option. Under the Blending Mode parameter, change the option to Screen. The title background will remove automatically.

Press OK.

Add the sound effect

Again, you must hide the second snapshot in the timeline with the same step as before. Then, drag the sound effect to the audio track timeline next. Tap on the Play button under the Preview to see how the effect looks with the sound. Cut out the extra second of the sound effect clip to align it with the ending section of all of the other clips.

Add the initial keyframes

Choose the first snapshot in the timeline, below the second snapshot, and above the background video clip. Then, double-click on it to open the editor window and choose the Animation tab this time instead of Image.

Add the keyframe here and change the value of the Scale parameter to 400 or something high like that. In the preview, you will see that most of the font in this title is out of frame. After this, click on Rotate and turn the font to 45 degrees.

Move your playhead on this snapshot clip in the timeline by at least 1 second. Then, add another keyframe in this location by tapping the Add button. Here, reset the Scale and Rotate parameters and press the OK button to end.

Add the lens flare and particle video

Next, go back to the media section where all the files you added are present and drag your lens flare clip to the timeline, right on the track above the last one you added. Drop it here and adjust the length of it to match others if it does not show that automatically.

Above it, drag and drop the Particles video from the media files you added previously onto the track above the lens flare one. Do the same to delete the spare part by moving the play head to that point, clicking on the scissor icon, and removing the extra part.

Then, double-click on this Particles video clip on the timeline and go to the Compositing section. Tap on the Blending Mode drop-down choice and choose the Screen option. Press OK. Next, repeat the same for the lens flare video and tap the OK button.

Now, play the preview again.

Adjust the second title, again

Remember how you clicked on the hide button for the second snapshot for title 2? Now, you have to click on the unhide icon beside it.

Move the play head to the 3-second mark from the beginning. If you need clarification on this, check if the lens flare effect is beginning to start below the first title at this point. Move your playhead to that point for the second snapshot.

Here, tap on the Split icon and remove the clip’s first half. Then, double-click on the second half and go to Animation. Press the Add button to insert a keyframe here and change the scale and position of the title at this point. Move it to the placement you want, right above the lens flare. Also, drag the slider for the Opacity parameter to zero at this point.

Subsequently, move the play head to the point when the lens flare effect stop, which is around 2 seconds more. At this point, you have to add another keyframe and change the Opacity to 100.

Play the preview of the whole thing to see how the effect looks in completion.

Conclusion

Indeed, the strobe light effect in the title of movies or videos of different lengths can effectively create a heart-stopping moment on the screen. Moreover, it can work to incite a feeling of anticipation in viewers, especially with the right music beat in the backdrop.

Using Filmora will allow you to add the cinematic effect quickly and efficiently with simple, quick steps. Follow the phases mentioned in this post while trying out different variations before settling on your final shot choice.

Also read: