Have You Ever Wondered How Those PowerPoint, Looping Slideshows You See in Conferences and Reception Areas Display and Move to the Next Slide Automatically without Clicking a Mouse? You Don’t Have to Be Amazed at This

How to make a PowerPoint looping slideshow

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

A PowerPoint Looping slideshow automatically starts over from the beginning after displaying the last slide. A particular slide is displayed for a certain amount of time interval. Once the time has elapsed, the slide automatically moves to the next one. It is sometimes used in seminars to keep the audience busy before the main presentation commences. In most tradeshows, the videos or information you notice repeatedly playing on its own are in a loop. The transition and slide sets get tweaked to work that way. In Nigeria, most banks use looped slides to display their welcome message. Looping slides make display work more accessible and give time to face other activities while your slide runs automatically.

In this article

01 [Advantages of PowerPoint looping slide](#Part 1)

02 [How to loop a PowerPoint in simple steps.](#Part 2)

Part 1 Advantages of PowerPoint Looping Slide.

PowerPoint slideshows aid and develop visual resources. Looping a PowerPoint slideshowmakes a presentation more accessible and more attractive. Studies show that humans tend to remember more of what they see than what they hear. You should use a PowerPoint-loop slideshow if you want to make a lasting impression while holding that conference, pitch to your boss at work, or even bid for that project**.** Here are some other reasons you should consider looping in your nextPowerPoint slide show.

A looping PowerPoint slideshow runs automatically. A typical PowerPoint presentation moves to the next slide when the presenter clicks the mouse, but a looping slideshow does not need human participation. It displays the next slide automatically after the time interval has elapsed.

It can be helpful to welcome guests to a meeting or Newcomers to an office reception area.

It ensures that latecomers do not miss any significant part of the presentation because a PowerPoint automatic slideshow loop starts all over again after displaying the last slide.

Setting up a looping slideshow is easy and does not require much equipment. You’re all set to go if you have a computer and projector.

It gives the speaker more time to focus on the audience and interact with them rather than concentrating on getting the next slide correctly.

With or without the presence of an operator, the PowerPoint presentation can display the slides configured to display.

It saves you the stress of arranging and rearranging slides during a meeting or an event.

It makes presentation easy and allows the large audience to flow with the speaker as they do not have to read from documents while trying to keep up with the speaker.

A PowerPoint configured to loop continuously can be used to pass general information.

Not everyone likes speaking in public or making a presentation in front of a large crowd. Someone like me immediately starts sweating profusely and has heart palpitations when many eyes are on me. In this kind of situation, a looped PowerPoint slideshow helps take the tension off a nervous speaker as the audience will most likely be concentrating on the slideshows instead of you.

Part 2 How to Loop a PowerPoint in Simple Steps.

Have you been wondering how to make PowerPoint looping slideshows? It seems like a challenging feat, but I’ll show you how to go about it. A looping PowerPoint presentation can create Visual presentations at various events like trade shows, kiosks, conferences, seminars, and many more gatherings. It can display automatically without the intervention of the presenter. With the correct procedure, you’ll be able to create a looping PowerPoint slideshow that will run without hitches. Setting up a looping PowerPoint presentation is relatively easy and doesn’t require rocket science as most people think. Below are simple steps on how to loop a slideshow on PowerPoint;

An easy way to set up looping slideshows is to apply automatic transitions and then set up your desired slideshow settings.

Step 1: Open your PowerPoint presentation

First, open and select the particular PowerPoint presentation you would like to loop.

Step 2: Set up the slideshow

Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button. Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button.

Step 3: Choose your mode of control over the slides.

Adialogue box will come up. In the” show options, “select if you want it to get presented by a speaker, which is the default setting of PowerPoint. This option gives the speaker or presenter control over when to advance the slide. The second option, which an individual browses, restricts the control of the speaker over the advancement of the slide, likewise the third option. Checkbox next to “Loop continuously until ‘Esc.’ Then click [OK]. The slide keeps looping automatically until the speaker or presenter presses ok.

Step 4: Select the number of slides you want to be displayed.

From the “Slides” preview side panel, tap your first slide, press and hold [Shift] and click your last slide or input the number of slides you want to display. This option will select all of the slides you want to display.

Step 5: Set up Transitions mode

Click the [Transitions] tab. The transition appears between slides when a slideshow is displayed. In the Transitions tab in PowerPoint, you can choose the type of transition (such as Fade). From the “Timing” group, uncheck the box next to “On Mouse Click” and check “After .”This setting enables the transition to occur after your preferred time and not when you click the mouse.

Step 6: Adjust the time interval

To adjust the duration you would like each slide to display, click the up and down arrows in the “After:” field within the “Timing” group. When your slideshow reaches the last slide, it will automatically loop back to the beginning.

****Wondershare Filmora Video Editor Software**

There are many video editing software, but one that stands out amongst them is filmora because of its unique video editing features. The Filmora software is undoubtedly one of the best beginner and professional-level video editing tools.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Making loop videos is relatively easy with its timeline features. Video loops are short clips that replay for a particular duration or unlimited times without the user having to click the play button repeatedly. This kind of video is quite trendy on social media platforms. Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow. Many tools can help you create these kinds of videos, and Filmora is one of them.

● Ending Thoughts →

● I’m sure that post reading this guide, you will be able to create a PowerPoint looping slideshow and know what software to use in creating loop videos.

● Learning how to loop a PowerPoint slideshow is a game-changer for organizations and meetings that require a large audience or attendees. The major shortcoming of using a PowerPoint presentation slideshow is that a display cannot hold without a laptop and projector.

Try It Free Try It Free

A PowerPoint Looping slideshow automatically starts over from the beginning after displaying the last slide. A particular slide is displayed for a certain amount of time interval. Once the time has elapsed, the slide automatically moves to the next one. It is sometimes used in seminars to keep the audience busy before the main presentation commences. In most tradeshows, the videos or information you notice repeatedly playing on its own are in a loop. The transition and slide sets get tweaked to work that way. In Nigeria, most banks use looped slides to display their welcome message. Looping slides make display work more accessible and give time to face other activities while your slide runs automatically.

In this article

01 [Advantages of PowerPoint looping slide](#Part 1)

02 [How to loop a PowerPoint in simple steps.](#Part 2)

Part 1 Advantages of PowerPoint Looping Slide.

PowerPoint slideshows aid and develop visual resources. Looping a PowerPoint slideshowmakes a presentation more accessible and more attractive. Studies show that humans tend to remember more of what they see than what they hear. You should use a PowerPoint-loop slideshow if you want to make a lasting impression while holding that conference, pitch to your boss at work, or even bid for that project**.** Here are some other reasons you should consider looping in your nextPowerPoint slide show.

A looping PowerPoint slideshow runs automatically. A typical PowerPoint presentation moves to the next slide when the presenter clicks the mouse, but a looping slideshow does not need human participation. It displays the next slide automatically after the time interval has elapsed.

It can be helpful to welcome guests to a meeting or Newcomers to an office reception area.

It ensures that latecomers do not miss any significant part of the presentation because a PowerPoint automatic slideshow loop starts all over again after displaying the last slide.

Setting up a looping slideshow is easy and does not require much equipment. You’re all set to go if you have a computer and projector.

It gives the speaker more time to focus on the audience and interact with them rather than concentrating on getting the next slide correctly.

With or without the presence of an operator, the PowerPoint presentation can display the slides configured to display.

It saves you the stress of arranging and rearranging slides during a meeting or an event.

It makes presentation easy and allows the large audience to flow with the speaker as they do not have to read from documents while trying to keep up with the speaker.

A PowerPoint configured to loop continuously can be used to pass general information.

Not everyone likes speaking in public or making a presentation in front of a large crowd. Someone like me immediately starts sweating profusely and has heart palpitations when many eyes are on me. In this kind of situation, a looped PowerPoint slideshow helps take the tension off a nervous speaker as the audience will most likely be concentrating on the slideshows instead of you.

Part 2 How to Loop a PowerPoint in Simple Steps.

Have you been wondering how to make PowerPoint looping slideshows? It seems like a challenging feat, but I’ll show you how to go about it. A looping PowerPoint presentation can create Visual presentations at various events like trade shows, kiosks, conferences, seminars, and many more gatherings. It can display automatically without the intervention of the presenter. With the correct procedure, you’ll be able to create a looping PowerPoint slideshow that will run without hitches. Setting up a looping PowerPoint presentation is relatively easy and doesn’t require rocket science as most people think. Below are simple steps on how to loop a slideshow on PowerPoint;

An easy way to set up looping slideshows is to apply automatic transitions and then set up your desired slideshow settings.

Step 1: Open your PowerPoint presentation

First, open and select the particular PowerPoint presentation you would like to loop.

Step 2: Set up the slideshow

Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button. Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button.

Step 3: Choose your mode of control over the slides.

Adialogue box will come up. In the” show options, “select if you want it to get presented by a speaker, which is the default setting of PowerPoint. This option gives the speaker or presenter control over when to advance the slide. The second option, which an individual browses, restricts the control of the speaker over the advancement of the slide, likewise the third option. Checkbox next to “Loop continuously until ‘Esc.’ Then click [OK]. The slide keeps looping automatically until the speaker or presenter presses ok.

Step 4: Select the number of slides you want to be displayed.

From the “Slides” preview side panel, tap your first slide, press and hold [Shift] and click your last slide or input the number of slides you want to display. This option will select all of the slides you want to display.

Step 5: Set up Transitions mode

Click the [Transitions] tab. The transition appears between slides when a slideshow is displayed. In the Transitions tab in PowerPoint, you can choose the type of transition (such as Fade). From the “Timing” group, uncheck the box next to “On Mouse Click” and check “After .”This setting enables the transition to occur after your preferred time and not when you click the mouse.

Step 6: Adjust the time interval

To adjust the duration you would like each slide to display, click the up and down arrows in the “After:” field within the “Timing” group. When your slideshow reaches the last slide, it will automatically loop back to the beginning.

****Wondershare Filmora Video Editor Software**

There are many video editing software, but one that stands out amongst them is filmora because of its unique video editing features. The Filmora software is undoubtedly one of the best beginner and professional-level video editing tools.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Making loop videos is relatively easy with its timeline features. Video loops are short clips that replay for a particular duration or unlimited times without the user having to click the play button repeatedly. This kind of video is quite trendy on social media platforms. Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow. Many tools can help you create these kinds of videos, and Filmora is one of them.

● Ending Thoughts →

● I’m sure that post reading this guide, you will be able to create a PowerPoint looping slideshow and know what software to use in creating loop videos.

● Learning how to loop a PowerPoint slideshow is a game-changer for organizations and meetings that require a large audience or attendees. The major shortcoming of using a PowerPoint presentation slideshow is that a display cannot hold without a laptop and projector.

Try It Free Try It Free

A PowerPoint Looping slideshow automatically starts over from the beginning after displaying the last slide. A particular slide is displayed for a certain amount of time interval. Once the time has elapsed, the slide automatically moves to the next one. It is sometimes used in seminars to keep the audience busy before the main presentation commences. In most tradeshows, the videos or information you notice repeatedly playing on its own are in a loop. The transition and slide sets get tweaked to work that way. In Nigeria, most banks use looped slides to display their welcome message. Looping slides make display work more accessible and give time to face other activities while your slide runs automatically.

In this article

01 [Advantages of PowerPoint looping slide](#Part 1)

02 [How to loop a PowerPoint in simple steps.](#Part 2)

Part 1 Advantages of PowerPoint Looping Slide.

PowerPoint slideshows aid and develop visual resources. Looping a PowerPoint slideshowmakes a presentation more accessible and more attractive. Studies show that humans tend to remember more of what they see than what they hear. You should use a PowerPoint-loop slideshow if you want to make a lasting impression while holding that conference, pitch to your boss at work, or even bid for that project**.** Here are some other reasons you should consider looping in your nextPowerPoint slide show.

A looping PowerPoint slideshow runs automatically. A typical PowerPoint presentation moves to the next slide when the presenter clicks the mouse, but a looping slideshow does not need human participation. It displays the next slide automatically after the time interval has elapsed.

It can be helpful to welcome guests to a meeting or Newcomers to an office reception area.

It ensures that latecomers do not miss any significant part of the presentation because a PowerPoint automatic slideshow loop starts all over again after displaying the last slide.

Setting up a looping slideshow is easy and does not require much equipment. You’re all set to go if you have a computer and projector.

It gives the speaker more time to focus on the audience and interact with them rather than concentrating on getting the next slide correctly.

With or without the presence of an operator, the PowerPoint presentation can display the slides configured to display.

It saves you the stress of arranging and rearranging slides during a meeting or an event.

It makes presentation easy and allows the large audience to flow with the speaker as they do not have to read from documents while trying to keep up with the speaker.

A PowerPoint configured to loop continuously can be used to pass general information.

Not everyone likes speaking in public or making a presentation in front of a large crowd. Someone like me immediately starts sweating profusely and has heart palpitations when many eyes are on me. In this kind of situation, a looped PowerPoint slideshow helps take the tension off a nervous speaker as the audience will most likely be concentrating on the slideshows instead of you.

Part 2 How to Loop a PowerPoint in Simple Steps.

Have you been wondering how to make PowerPoint looping slideshows? It seems like a challenging feat, but I’ll show you how to go about it. A looping PowerPoint presentation can create Visual presentations at various events like trade shows, kiosks, conferences, seminars, and many more gatherings. It can display automatically without the intervention of the presenter. With the correct procedure, you’ll be able to create a looping PowerPoint slideshow that will run without hitches. Setting up a looping PowerPoint presentation is relatively easy and doesn’t require rocket science as most people think. Below are simple steps on how to loop a slideshow on PowerPoint;

An easy way to set up looping slideshows is to apply automatic transitions and then set up your desired slideshow settings.

Step 1: Open your PowerPoint presentation

First, open and select the particular PowerPoint presentation you would like to loop.

Step 2: Set up the slideshow

Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button. Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button.

Step 3: Choose your mode of control over the slides.

Adialogue box will come up. In the” show options, “select if you want it to get presented by a speaker, which is the default setting of PowerPoint. This option gives the speaker or presenter control over when to advance the slide. The second option, which an individual browses, restricts the control of the speaker over the advancement of the slide, likewise the third option. Checkbox next to “Loop continuously until ‘Esc.’ Then click [OK]. The slide keeps looping automatically until the speaker or presenter presses ok.

Step 4: Select the number of slides you want to be displayed.

From the “Slides” preview side panel, tap your first slide, press and hold [Shift] and click your last slide or input the number of slides you want to display. This option will select all of the slides you want to display.

Step 5: Set up Transitions mode

Click the [Transitions] tab. The transition appears between slides when a slideshow is displayed. In the Transitions tab in PowerPoint, you can choose the type of transition (such as Fade). From the “Timing” group, uncheck the box next to “On Mouse Click” and check “After .”This setting enables the transition to occur after your preferred time and not when you click the mouse.

Step 6: Adjust the time interval

To adjust the duration you would like each slide to display, click the up and down arrows in the “After:” field within the “Timing” group. When your slideshow reaches the last slide, it will automatically loop back to the beginning.

****Wondershare Filmora Video Editor Software**

There are many video editing software, but one that stands out amongst them is filmora because of its unique video editing features. The Filmora software is undoubtedly one of the best beginner and professional-level video editing tools.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Making loop videos is relatively easy with its timeline features. Video loops are short clips that replay for a particular duration or unlimited times without the user having to click the play button repeatedly. This kind of video is quite trendy on social media platforms. Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow. Many tools can help you create these kinds of videos, and Filmora is one of them.

● Ending Thoughts →

● I’m sure that post reading this guide, you will be able to create a PowerPoint looping slideshow and know what software to use in creating loop videos.

● Learning how to loop a PowerPoint slideshow is a game-changer for organizations and meetings that require a large audience or attendees. The major shortcoming of using a PowerPoint presentation slideshow is that a display cannot hold without a laptop and projector.

Try It Free Try It Free

A PowerPoint Looping slideshow automatically starts over from the beginning after displaying the last slide. A particular slide is displayed for a certain amount of time interval. Once the time has elapsed, the slide automatically moves to the next one. It is sometimes used in seminars to keep the audience busy before the main presentation commences. In most tradeshows, the videos or information you notice repeatedly playing on its own are in a loop. The transition and slide sets get tweaked to work that way. In Nigeria, most banks use looped slides to display their welcome message. Looping slides make display work more accessible and give time to face other activities while your slide runs automatically.

In this article

01 [Advantages of PowerPoint looping slide](#Part 1)

02 [How to loop a PowerPoint in simple steps.](#Part 2)

Part 1 Advantages of PowerPoint Looping Slide.

PowerPoint slideshows aid and develop visual resources. Looping a PowerPoint slideshowmakes a presentation more accessible and more attractive. Studies show that humans tend to remember more of what they see than what they hear. You should use a PowerPoint-loop slideshow if you want to make a lasting impression while holding that conference, pitch to your boss at work, or even bid for that project**.** Here are some other reasons you should consider looping in your nextPowerPoint slide show.

A looping PowerPoint slideshow runs automatically. A typical PowerPoint presentation moves to the next slide when the presenter clicks the mouse, but a looping slideshow does not need human participation. It displays the next slide automatically after the time interval has elapsed.

It can be helpful to welcome guests to a meeting or Newcomers to an office reception area.

It ensures that latecomers do not miss any significant part of the presentation because a PowerPoint automatic slideshow loop starts all over again after displaying the last slide.

Setting up a looping slideshow is easy and does not require much equipment. You’re all set to go if you have a computer and projector.

It gives the speaker more time to focus on the audience and interact with them rather than concentrating on getting the next slide correctly.

With or without the presence of an operator, the PowerPoint presentation can display the slides configured to display.

It saves you the stress of arranging and rearranging slides during a meeting or an event.

It makes presentation easy and allows the large audience to flow with the speaker as they do not have to read from documents while trying to keep up with the speaker.

A PowerPoint configured to loop continuously can be used to pass general information.

Not everyone likes speaking in public or making a presentation in front of a large crowd. Someone like me immediately starts sweating profusely and has heart palpitations when many eyes are on me. In this kind of situation, a looped PowerPoint slideshow helps take the tension off a nervous speaker as the audience will most likely be concentrating on the slideshows instead of you.

Part 2 How to Loop a PowerPoint in Simple Steps.

Have you been wondering how to make PowerPoint looping slideshows? It seems like a challenging feat, but I’ll show you how to go about it. A looping PowerPoint presentation can create Visual presentations at various events like trade shows, kiosks, conferences, seminars, and many more gatherings. It can display automatically without the intervention of the presenter. With the correct procedure, you’ll be able to create a looping PowerPoint slideshow that will run without hitches. Setting up a looping PowerPoint presentation is relatively easy and doesn’t require rocket science as most people think. Below are simple steps on how to loop a slideshow on PowerPoint;

An easy way to set up looping slideshows is to apply automatic transitions and then set up your desired slideshow settings.

Step 1: Open your PowerPoint presentation

First, open and select the particular PowerPoint presentation you would like to loop.

Step 2: Set up the slideshow

Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button. Once your desired presentation is open, go to the “Set Up” group on the “Slide Show” tab and then click on the “Set Up Slide Show” button.

Step 3: Choose your mode of control over the slides.

Adialogue box will come up. In the” show options, “select if you want it to get presented by a speaker, which is the default setting of PowerPoint. This option gives the speaker or presenter control over when to advance the slide. The second option, which an individual browses, restricts the control of the speaker over the advancement of the slide, likewise the third option. Checkbox next to “Loop continuously until ‘Esc.’ Then click [OK]. The slide keeps looping automatically until the speaker or presenter presses ok.

Step 4: Select the number of slides you want to be displayed.

From the “Slides” preview side panel, tap your first slide, press and hold [Shift] and click your last slide or input the number of slides you want to display. This option will select all of the slides you want to display.

Step 5: Set up Transitions mode

Click the [Transitions] tab. The transition appears between slides when a slideshow is displayed. In the Transitions tab in PowerPoint, you can choose the type of transition (such as Fade). From the “Timing” group, uncheck the box next to “On Mouse Click” and check “After .”This setting enables the transition to occur after your preferred time and not when you click the mouse.

Step 6: Adjust the time interval

To adjust the duration you would like each slide to display, click the up and down arrows in the “After:” field within the “Timing” group. When your slideshow reaches the last slide, it will automatically loop back to the beginning.

****Wondershare Filmora Video Editor Software**

There are many video editing software, but one that stands out amongst them is filmora because of its unique video editing features. The Filmora software is undoubtedly one of the best beginner and professional-level video editing tools.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Making loop videos is relatively easy with its timeline features. Video loops are short clips that replay for a particular duration or unlimited times without the user having to click the play button repeatedly. This kind of video is quite trendy on social media platforms. Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow. Many tools can help you create these kinds of videos, and Filmora is one of them.

● Ending Thoughts →

● I’m sure that post reading this guide, you will be able to create a PowerPoint looping slideshow and know what software to use in creating loop videos.

● Learning how to loop a PowerPoint slideshow is a game-changer for organizations and meetings that require a large audience or attendees. The major shortcoming of using a PowerPoint presentation slideshow is that a display cannot hold without a laptop and projector.

Make Super Easy Coin Magic With Filmora

Do you want to become a magician in your videos? Now, everyone can look like a magician with the magic of editing. This article will show you how to do a cool coin trick in Filmora 11 .

Part 1: What is the filmmaking technique “Cutting on action”

Cutting on action is a technique the editors use to cut in the middle of an action to another shot that matches the first shot’s action. Typically, the subject starts an action in one shot and continues the action in another, creating a smooth transition. For example, when you make the coin trick video, you need to cut on the tapping so it can trick the eyes, and the cut won’t be noticeable.

Part 2: Things You Need to Prepare for The Coin Magic Trick

1. Glass and two coins

1. Set the phone on a tripod. Because utilizing a tripod can significantly improve the recording’s stability.

Part 3: Start Filming

Step1 Firstly, you must show the coin and the bottom of the glass.

Step2 After that, you need to hold the coin with the fingers part of one hand and tap down on the coin. Make sure it looks like the coin is going through straight to the glass.

Step3 You need someone else to drop the other coin from the top. Meanwhile, you are pretending to tap a coin on the glass. You don’t need to worry about someone else hand in the frame. Since you can remove it easily with the masking feature in Filmora.

Step4 It would help if you had a second shot for a clean plate of the background. You can record background for 20 seconds.

Part 4: Bring the clips into Filmora 11

Step1 If you have not downloaded Filmora, you can visit filmora.wondershare.com to download Filmora’s new version.

Step2 Drag and drop the clip onto the first track of the timeline.Afterward, move the playhead to the right and find the spot where you tapped the coin last time before your friend drops the other coin. Additionally, make sure it is in the middle of the tapping action and cut.

Step3 Then move the playhead to the right and find the spot where your friend drops the coin while you tap without the coin in your hand. Make sure it is in the middle of the tapping action, and the position of your hand roughly matches that in the last cut and make a cut.

Step4 Now you need to delete the middle part and play it back. Indeed, cutting on action is the key to creating the illusion that the action is continued without editing.

Step5 Next, you must remove your friend’s hand in the frame with the Filmora masking feature. Afterwards. drag and drop the clean plate video onto the second track of the timeline.

Step6 Next, double-click the clip to open the setting video. Find the Mask Section and select the single line.

Step7 Here you can see the mask is applied.First, adjust the angle and position of the mask to only show the top part of the frame. Then you have to change the Blur Strength to add more blur to the edge of the mask.

Step8 With the mask finalized, unhide the first video track and adjust the length of the clip on the timeline. Finally, playback the video and see how it looks.

Summary

That’s how to make a coin move through a glass-like MAGIC with the cutting on action editing technique. You can pay close attention to the steps above and follow each step for perfect results.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

How to Create Motion Text Effects for Your Video?

When you think about text effects, you generally refer to the amazing static text styles that will make any text look stunning. But when you talk about any text or title in a video, static text effects do not draw a scratch in the minds of the beholders. You have to get your text in motion and that is where text animations come into the scene.

Motion text effects refer to the text being in motion so that it can go well with any video in the background as well as look visually appealing. Creating text motion graphics is easy these days if you have the right video editor. There are amazing motion text animation templates available that you can apply to the texts and titles in your video and amaze your viewers. We will illustrate the simple steps to create motion text graphics in popular video editors.

Part 1. Create Motion Text Effect with Filmora

Wondershare Filmora is undoubtedly the easiest video editor to create amazing motion text effects thanks to its intuitive user interface. There are different categories of motion text effects available to suit your requirements perfectly as per your video projects. Filmora has the latest collection of text effects that you can use in your video and outshine your competitors.

Apart from text animations, you get different elements to enhance your text effects. You can have animated backgrounds and you can customize the animation in your text minutely to get the desired result. Filmora is available for both Windows and Mac users and you can try out its free trial before purchasing the license. Here are the steps to create Alight Motion text effect using Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora on your computer. Click on New Project on the welcome screen. You can drag and drop your video clip for the background on Project Media folder.

Step2 Drop the video clip onto timeline. If you do not have any background video, you can select background from Stock Media> pexels/Pixabay> Video and drop animated background onto the timeline.

Step3 Go to Titles and search for “animation” and you will get all the motion text effect and animation templates. Select any one of them and drop onto the timeline above the background layer.

Step4 Double-click on the text layer to type in your desired text. Reposition the text layer on the timeline and on the video from Viewer.

Part 2. Use Premiere Pro to Make Motion Text

Adobe Premiere Pro is one of the most preferred video editors among professionals. Even though Premiere Pro does not come with a vast set of motion text effects, you can download them online and import them to use for the texts in your video. Here are the steps to create text motion graphics on Premiere Pro.

Step1 Go to Graphics> Essential Graphics and select a motion text effect template as per your preference. Drag and drop it into your timeline above your video or background clip.

Step2 Double-click on the text to edit the words and type in your text. Go to Essential Graphics panel to customize the text effect parameters as per your requirements.

Step3 If you want to edit the animation, select the text layer and go to Effects Control panel. Open up Keyframe box by dragging it to the right. Adjust the keyframe as per your animation requirements.

Bring the keyframes closer or spread them apart to speed up or slow down. Tweak parameters like? Velocity Controls under different text properties to edit the animation effectively.

Part 3. How to Make Motion Text in After Effects

After Effects is the most popular video editor when it comes to motion text effects. This is because there are different categories of motion text animation templates and presets available like Filmora. Even though the user interface is slightly complicated like Premiere Pro, most professionals use the tool for video editing and adding text effects. Here are the steps to add motion text effect Alight Motion like using After Effects.

Step1 From Tool panel, click on Type tool and click on Composition panel to type in your text. From Characters and Paragraph section, adjust the text styles and textures.

Step2 Go to Effects and Presets panel, go through and search for the desired motion text effect preset. Drag and drop the selected preset on the text layer directly.

Step3 From Current Time Indicator, slide the keyframes to adjust the animation. Click on the text layer to expand it and adjust different parameters to get the desired text animation.

Part 4. Best Motion Effects Ideas to Try

There are several text motions effects available that make your text look stunning and grab the attention of the viewers instantly. If you are confused which text motion effects you should try out, there are some of the best text motion effects you can try out on After Effects and Filmora.

Data Stream – You get the motion effect on After Effects where the characters come on the screen in a scrambled fashion. Thereafter, the characters organize them to form meaning words and sentences. Then the words disperse in a scrambled fashion before the next words and sentences follow the same pattern.

Abstract Motion Intro – You can get the motion effect on Filmora where there are multiple animations are put together in one effect. There are 3d effect, slide in motion as well as zoom in effect to display the desired texts and titles colourfully.

Random Spike Tumble – This is another motion effect on After Effects where the characters appear on the screen with spike in size along with blur effect and flipping animation. Finally, they settle on the screen and the meaning word or sentence appears perfectly. The effect helps to hold the attention of the viewers throughout.

Comic and Life Effect – You get this motion effect on Filmora where the large texts are shown and they have a comical typography. The words keep on zooming in and out to add to the comical factor.

Corporate Title Effect – This comes as a pack on After Effects whereby you get amazing text motion effects that you mostly see in professional videos. Starting from oblique stripe and emerge effect to slide in and out with modern touches and objects, you get stunning text motion to enhance your video content.?

The Bottom Line

If there are texts and titles in your video, you have to use motion text effect to make your video content interesting. We have illustrated the simple steps to create and edit motion text effects. We recommend Wondershare Filmora as the best video editor for creating motion text effects as the user interface is intuitive and there are unlimited motion text effects to choose from.

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora on your computer. Click on New Project on the welcome screen. You can drag and drop your video clip for the background on Project Media folder.

Step2 Drop the video clip onto timeline. If you do not have any background video, you can select background from Stock Media> pexels/Pixabay> Video and drop animated background onto the timeline.

Step3 Go to Titles and search for “animation” and you will get all the motion text effect and animation templates. Select any one of them and drop onto the timeline above the background layer.

Step4 Double-click on the text layer to type in your desired text. Reposition the text layer on the timeline and on the video from Viewer.

Part 2. Use Premiere Pro to Make Motion Text

Adobe Premiere Pro is one of the most preferred video editors among professionals. Even though Premiere Pro does not come with a vast set of motion text effects, you can download them online and import them to use for the texts in your video. Here are the steps to create text motion graphics on Premiere Pro.

Step1 Go to Graphics> Essential Graphics and select a motion text effect template as per your preference. Drag and drop it into your timeline above your video or background clip.

Step2 Double-click on the text to edit the words and type in your text. Go to Essential Graphics panel to customize the text effect parameters as per your requirements.

Step3 If you want to edit the animation, select the text layer and go to Effects Control panel. Open up Keyframe box by dragging it to the right. Adjust the keyframe as per your animation requirements.

Bring the keyframes closer or spread them apart to speed up or slow down. Tweak parameters like? Velocity Controls under different text properties to edit the animation effectively.

Part 3. How to Make Motion Text in After Effects

After Effects is the most popular video editor when it comes to motion text effects. This is because there are different categories of motion text animation templates and presets available like Filmora. Even though the user interface is slightly complicated like Premiere Pro, most professionals use the tool for video editing and adding text effects. Here are the steps to add motion text effect Alight Motion like using After Effects.

Step1 From Tool panel, click on Type tool and click on Composition panel to type in your text. From Characters and Paragraph section, adjust the text styles and textures.

Step2 Go to Effects and Presets panel, go through and search for the desired motion text effect preset. Drag and drop the selected preset on the text layer directly.

Step3 From Current Time Indicator, slide the keyframes to adjust the animation. Click on the text layer to expand it and adjust different parameters to get the desired text animation.

Part 4. Best Motion Effects Ideas to Try

There are several text motions effects available that make your text look stunning and grab the attention of the viewers instantly. If you are confused which text motion effects you should try out, there are some of the best text motion effects you can try out on After Effects and Filmora.

Data Stream – You get the motion effect on After Effects where the characters come on the screen in a scrambled fashion. Thereafter, the characters organize them to form meaning words and sentences. Then the words disperse in a scrambled fashion before the next words and sentences follow the same pattern.

Abstract Motion Intro – You can get the motion effect on Filmora where there are multiple animations are put together in one effect. There are 3d effect, slide in motion as well as zoom in effect to display the desired texts and titles colourfully.

Random Spike Tumble – This is another motion effect on After Effects where the characters appear on the screen with spike in size along with blur effect and flipping animation. Finally, they settle on the screen and the meaning word or sentence appears perfectly. The effect helps to hold the attention of the viewers throughout.

Comic and Life Effect – You get this motion effect on Filmora where the large texts are shown and they have a comical typography. The words keep on zooming in and out to add to the comical factor.

Corporate Title Effect – This comes as a pack on After Effects whereby you get amazing text motion effects that you mostly see in professional videos. Starting from oblique stripe and emerge effect to slide in and out with modern touches and objects, you get stunning text motion to enhance your video content.?

The Bottom Line

If there are texts and titles in your video, you have to use motion text effect to make your video content interesting. We have illustrated the simple steps to create and edit motion text effects. We recommend Wondershare Filmora as the best video editor for creating motion text effects as the user interface is intuitive and there are unlimited motion text effects to choose from.

How to Use Rules of Thirds

So you have your work flow sorted out and you’re well on your way with Filmora but you’re not quite happy with your results or something just seems off when you watch your videos back. You may be missing an important element of all visual media and that’s composition. This is where the building blocks of every frame come together to make a visually pleasing piece for the viewer and helps the eyes concentrate on the content rather than trying to figure out what they are looking at.

I’m sure you may have heard of the rule of thirds for art or photography and you may not know or understand what it is. You may even be wondering how the rule of thirds can help you with your video creation. Well, that is what I’m going to show and explain to you today.

What is the rule of thirds

At its core the rule of thirds is a guide to follow whenever you create something visual.

You break an image into thirds both horizontally and vertically, in doing this you are left with nine boxes and four gridlines, the rule states that by placing key elements in line with gridlines you will have an overall better composition.

To gain a better understanding of this here is a visual example of the gridlines and nine boxes.

This may seem simple but is often overlooked due to time restraints and eagerness to get that video out there. By following these guidelines your overall composition will gain interesting and pleasing results that can help with viewer engagement. This is only one piece of the puzzle but as any photography professional or artist will tell you, It’s the small things that add up.

How to use the rule of thirds

To show how to use the rule of thirds I will be showing an image with and without the use of the guidelines. In doing this you will be able to see how impactful this system is and how it can help with your own creations within Filmora .

This will be our scene example, you can see buildings, boats, water and skyline. This may be typical of a backdrop or an insert for a holiday picture amongst many other things.

I will now show this picture with no compositional thought and without the use of the thirds system.

Notice how all the elements are in the scene but it just looks interesting and something just seems off when you look at it. You may find yourself searching for understanding of the image rather than taking the image in and concentrating on what the creator intended. This is seen commonly due to the need to fit every element in the scene but sometimes it is best to sacrifice something you may see as important for the sake of the whole picture.

We will now look at the example image with the rule of thirds in place and see if overall this makes a more interesting scene.

We have aligned the skyline with the first horizontal grid line and aligned the boats with the vertical grid lines. We have sacrificed the crane in the scene but overall I’m sure you can agree that this is more pleasing and makes more sense when you’re viewing this. The whole middle section of the scene now has information within it and the contrast between the middle and the rest of the scene directs your eyes to what was intended to be viewed, This is called effect use of empty space. In doing this you save yourself time from adding more information to direct the viewer.

Placing key elements directly in the center of your scene can seem static and boring but by placing elements to one side or using the first and second horizontal grid lines you create something called Dynamism , where the viewer sees an element along the grid and takes a journey through the rest of the image.

Studies have shown that this is the humans natural way of viewing imagery, we first find something interesting to look at and then journey around that. So by using this rule you are creating a more natural process for your viewer.

Tips when starting using the rule of thirds

The first tip I would say is to view other videos, YouTube is a good starting point. Watch interviews and notice where the chairs are aligned. Watch reviewers and notice where they position themselves in the scene. Lastly watch movies and pause on an interesting scene and try to deconstruct where everything is placed and why they chose that composition.

The idea with the rule is to have it become something you do naturally, by always considering the form you save yourself time in the editing process. The key things you have in your mind whenever you make a scene should be.

1. What is the key element in my scene or what am I trying to make the viewer focus on.

2. where do I intend to place these in my scene?

3. Have I created a balanced scene with enough negative space to direct the eye.

If you consider this with every video you make then in time this will become as natural as drinking water on a hot day. As a practice you could open some old projects and apply this rule to your video to see the results and you may find yourself impressed with the change.

When is it best to not use the rule of thirds?

The rule is very useful when you’re aiming to grab the attention towards a certain element but that being said, when you have a symmetrical scene you can get away with not using the rule as your eyes can make sense of symmetry very well.

Even when working with a symmetrical scene you can incorporate the rule within for elements such as people or key figures but in this situation it is down to the creator to figure what they feel is best in any given shot.

How to Use Rule of Thirds in Filmora

The tools provided within Filmora are generous and one great feature is the crop and size tool.

When inserting an image or movie file you can right click on the timeline and select crop and size bringing up a handy screen with the gridlines already there for you. It’s just a matter of aligning your shot for the best composition.

For reference I will show you what this looks like.

First right click the timeline on the image you want to reposition. Alternatively you can select the desired insert and press Alt+C this will also bring up the same editing box.

Now click on the crop and zoom option and this editor will appear.

As you can see you are able to align the shot and change the aspect ratio to align with your project. For a better look at the built in grid lines see image below.

Conclusion

To conclude, the rule of thirds is very important within visual media and is tough within the fundamentals of art and photography from beginner level right up to the highest point of education, Practice thinking about your placement of key elements within your videos and how this affects your overall composition. The goal is to have this as an automatic thought when shooting your videos or still images. This is a small change you can make but has a big impact on how a viewer engages your content and in return leaves a positive opinion towards your creativity and eye for detail.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Also read: