Want to Apply a Filter on Your Video Using Your iPhone or Mac? Here Are the Simple Steps to Put Add Filters on iMovie. Find Out a Better iMovie Alternative with More Filters

There are times when you record a video and find out that the light and color in the video have been up to the mark. The light could be too bright or too dark while there could be some color overlays in certain portion as well as the entire frame of the video. Thanks to the video editing apps, you can correct any lighting and coloration issues with different filters available to apply to your video.

If you are using iPhone or Mac, you can use Apple’s iMovie app easily. Therefore, you should know how to add filters on iMovie to get the desired output. iMovie app is available for both iPhone and iPad users as well as Mac users. You do not need prior experience in video editing to add filter to your videos to enhance and improve them. We will illustrate the steps on how to add filters in iMovie as well as suggest a better iMovie alternative.

Part 1. How to add filters on iMovie iPhone

If you have an iPhone, you are more likely to record a video with your iPhone. This is because the camera quality of iPhones is extremely good and there are various modes available for capturing different types of videos like slow-motion and time-lapse. Once you capture a video with your iPhone, you can edit the video and add filters to enhance the video quality using iMovie app available for iPhone.

You have to install iMovie app from App Store as it does not come pre-install. If you already have it installed, make sure you update it to the latest version to get all the filters. Here are the steps how to put a filter on a video in iMovie app.

Step1 Open iMovie app on your iPhone. Tap on Create Project option and tap on Movie on the next screen.

Step2 Select the video from your iPhone that you want to edit and add filters. After your selection, tap on Create Movie option located at the bottom.

Step3 Your selected video will now be available on the Timeline where you can edit your video. Tap on Filters icon located at the bottom-right corner.

Step4 You will see all the different filters available on iMovie app. You can also find a slider above each selected filter. You can adjust the filter to increase or decrease the filter intensity.

Step5 Tap on Play icon to check how the filter is looking on your video. Once you are satisfied, tap on Done option located at the top-left corner.

Step6 Tap on Share icon at the bottom and then tap on Save Video option to save the modified video on your iPhone.

Part 2. How to add filters on Mac iMovie

If you are someone who regularly makes videos for social media account or video streaming channel, you are more likely to record your video using a video camera and transfer the recorded video to you Mac for editing purposes. iMovie comes pre-installed on Mac, and therefore, once you have transferred the video, you can get started with editing and adding filters immediately. Here are the steps on how to add filters to iMovie on your Mac.

Step1 Launch iMovie from Applications folder. Click on Create New option to start a new Project.

Step2 Drag and drop the target video from Photos app to Desktop. Thereafter, drag and drop the video file from Desktop to the Timeline of iMovie project.

Step3 Click on the video clip on the Timeline and click on Crop Filter and Audio Effects icon above the Viewer.

Step4 Click on Clip Filter option and you will see different filters in a window to the left. Place the mouse pointer over the filters, and you will see the filter in the Viewer.

Step5 Once you are satisfied with a filter, click on that filter to apply it to the video clip.

Part 3. iMovie Alternative to add filters on Computer

There are several reasons iMovie filters may not always serve your purpose. For example, there is no way on how to add face filters on iMovie. The collection of filters is rather limited. If you are not satisfied with the filters available on iMovie, there are several iMovie alternatives available. We recommend Wondershare Filmora due to its vast collection of filters of all categories to enhance your video to the next level. Here are steps on how to add filters to your video using Filmora on your computer.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora and it is available for Mac as well as Windows users. Open Filmora and click New Project.

Step2 Drag and drop video clips under Project Media folder. Thereafter, drag and drop video clips to Timeline.

Step3 Go to Effects from the top panel and click on Filters from the left panel. You will see all the different categories of filters.

Step4 Select any filter and drag and drop it on Timeline. You can stretch the duration of the filter as per your requirements.

You can also check Overlay> Utility option from the left panel to add face filters to your video in the same manner. If you want to save the modified video, click on Export button.

Conclusion

If you are an iPhone user or a Mac user, you can add filters to your video using iMovie app. You have to install iMovie app on your iPhone, but iMovie comes pre-installed on Mac. But there are limited filters available on iMovie and there is a lack of face filters which are trending in today’s viral videos. That is why we recommend Wondershare Filmora where there is a wide range of filters available to apply to your video conveniently as per your requirements.

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora and it is available for Mac as well as Windows users. Open Filmora and click New Project.

Step2 Drag and drop video clips under Project Media folder. Thereafter, drag and drop video clips to Timeline.

Step3 Go to Effects from the top panel and click on Filters from the left panel. You will see all the different categories of filters.

Step4 Select any filter and drag and drop it on Timeline. You can stretch the duration of the filter as per your requirements.

You can also check Overlay> Utility option from the left panel to add face filters to your video in the same manner. If you want to save the modified video, click on Export button.

Conclusion

If you are an iPhone user or a Mac user, you can add filters to your video using iMovie app. You have to install iMovie app on your iPhone, but iMovie comes pre-installed on Mac. But there are limited filters available on iMovie and there is a lack of face filters which are trending in today’s viral videos. That is why we recommend Wondershare Filmora where there is a wide range of filters available to apply to your video conveniently as per your requirements.

Discover the Process of Slowing Down Time-Lapse Videos on Your iPhone

There are moments that need highlighting and there are moments that need a flashing speed. You can control both moments if you are just wondering can slow down a time lapse. There are video editing softwares like Filmora if you want to know how to slow down time lapse on iPhone. Let’s discuss some of the best time lapse editing tools and also learn about how to slow down a time lapse

Part1 What Is Time-Lapse?

Time-lapse is a cinematography and photography technique that captures a series of images or frames at specific intervals over a prolonged period of time and then plays them back at a much faster rate. This creates a visually captivating effect where time appears to be moving faster than in real life.

In a time-lapse video, moments typically occur slowly or over an extended period, such as the movement of clouds, the growth of plants, or construction of buildings are compressed into a short video clip. Time-lapse is a powerful storytelling tool and if you are tempted to learn how to slow down a time lapse video because sometimes they can be faster than we intend them to be. Let’s discuss how you can slow down time lapse video.

Part2 Method 1: Using Filmora To Change Time Lapse Speed

Filmora is one of the best video editing software whose user-friendly interface allows both beginners and professionals to create compelling videos effortlessly. With Filmora, you can cut, trim, slow down time lapse video, and edit videos. You can also apply built-in effects and transitions, and adjust the playback speed to create stunning time-lapse or slow-motion effects.

Filmora also offers advanced color grading tools so that you can correct and enhance the color in your videos to make them visually appealing. Additionally, Filmora supports a wide range of video formats and allows easy exporting of edited videos to various platforms, making the sharing process convenient and straightforward. With its rich library of royalty-free music and sound effects. Let’s discuss how to change time lapse speed on iPhone.

AI Time-Lapse For Win 7 or later(64-bit)

AI Time-Lapse For macOS 10.14 or later

1. Open Filmora and start a new project.
2. Import your time-lapse video by either clicking on “Import” or dragging and dropping the file into the media library.
3. Drag the imported video from the media library to the timeline at the bottom of the screen.
4. Click on the video in the timeline to select it. You should see editing options appear.
5. Look for a speed option, often represented as a speedometer icon. Click on it to open the speed settings.
6. In the speed settings, you can slow down time lapse video. You can make it slower according to your preference.
7. After adjusting the speed, play the video in the preview window to see if it’s at the desired speed.
8. Once done with performing time lapse slower, save and export your edited time-lapse video by choosing the “Export” option.
9. Choose the desired output format and save location, then click “Export” to save the edited video.

Part3 Method 2: Using Imovie To Change Time Lapse Speed

1. Open iMovie on your iOS device.
2. Import the time-lapse video you want to edit.
3. Drag and drop the video onto the timeline.
4. Select the video clip on the timeline.
5. Look for the speed adjustment settings; it is usually represented by a turtle or hare icon.
6. Click on the speed adjustment icon, and a slider or option to change the speed will appear.
7. Adjust the speed according to your preference by dragging the slider or entering a value.
8. Play the video to preview the new speed.
9. Once you are done with the slow down time lapse video, you can save or export the edited video.

Summary

Learning how to slow down time lapse videos on iPhone enhances the storytelling power of your cinematography, allowing viewers to engage more deeply with your content. There are video editing tools like Filmora and iMovie which have revolutionized the editing process, making it feasible to slow down time lapse video directly on your iPhone. These tools are user-friendly and equipped with intuitive features that guide you through the process of modifying the speed of your time-lapse creations.

It is easier to master how to slow down a time lapse, so as a filmmaker, content creator and photographer, you can showcase events or phenomena that unfold over a long period of time in a brief span of time. The techniques and tools such as Filmora , available today, make the task simpler and more accessible, even for beginners. Using Filmora, you can effectively slow down time lapse sequences so that your narratives are conveyed compellingly and that every critical detail is highlighted for your audience’s appreciation and understanding.

AI Time-Lapse For Win 7 or later(64-bit)

AI Time-Lapse For macOS 10.14 or later

1. Open Filmora and start a new project.
2. Import your time-lapse video by either clicking on “Import” or dragging and dropping the file into the media library.
3. Drag the imported video from the media library to the timeline at the bottom of the screen.
4. Click on the video in the timeline to select it. You should see editing options appear.
5. Look for a speed option, often represented as a speedometer icon. Click on it to open the speed settings.
6. In the speed settings, you can slow down time lapse video. You can make it slower according to your preference.
7. After adjusting the speed, play the video in the preview window to see if it’s at the desired speed.
8. Once done with performing time lapse slower, save and export your edited time-lapse video by choosing the “Export” option.
9. Choose the desired output format and save location, then click “Export” to save the edited video.

Part3 Method 2: Using Imovie To Change Time Lapse Speed

1. Open iMovie on your iOS device.
2. Import the time-lapse video you want to edit.
3. Drag and drop the video onto the timeline.
4. Select the video clip on the timeline.
5. Look for the speed adjustment settings; it is usually represented by a turtle or hare icon.
6. Click on the speed adjustment icon, and a slider or option to change the speed will appear.
7. Adjust the speed according to your preference by dragging the slider or entering a value.
8. Play the video to preview the new speed.
9. Once you are done with the slow down time lapse video, you can save or export the edited video.

Summary

Learning how to slow down time lapse videos on iPhone enhances the storytelling power of your cinematography, allowing viewers to engage more deeply with your content. There are video editing tools like Filmora and iMovie which have revolutionized the editing process, making it feasible to slow down time lapse video directly on your iPhone. These tools are user-friendly and equipped with intuitive features that guide you through the process of modifying the speed of your time-lapse creations.

It is easier to master how to slow down a time lapse, so as a filmmaker, content creator and photographer, you can showcase events or phenomena that unfold over a long period of time in a brief span of time. The techniques and tools such as Filmora , available today, make the task simpler and more accessible, even for beginners. Using Filmora, you can effectively slow down time lapse sequences so that your narratives are conveyed compellingly and that every critical detail is highlighted for your audience’s appreciation and understanding.

Clone Yourself in Videos with Filmora

With the help of video editing programs like Filmora , you can create clones of yourself. Whether you’re looking to create a funny skit or a serious video, cloning yourself can add much production value to your project.

In this article, we’ll walk you through the process of how to clone yourself in videos using Filmora.

Part 1: How to Film Clips for Cloning Effects?

To make cloning effects, you will need to take two different shots and use a tripod to place the camera, so the frame doesn’t change.

Shooting the first clip

For the first shot, stay on one side of the frame and do the first action. For example, you can pretend to yank and take off your jacket. Then, drop the jacket to the other side of the frame.

To make it more realistic, make an interaction by reacting to the “clone” while facing the other direction.

Shooting the second clip

Then, shoot for the second clip without changing the frame. You will have to go to the place where you dropped the jacket from the first shot.

Act as if you have just appeared there and give a reaction to the other side as well.

Part 2: How to Do the Clone Effect with Filmora?

After you have shot the necessary film clips, bring the clips into Filmora 11. If you haven’t installed Filmora yet, you can go to their website and download it here:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Once you have opened Filmora 11, follow the steps below:

Step1 Bring the first clip to the timeline and cut the clip where you pretend to yank and take off the jacket. Select and delete the unnecessary clip.

Step2 After you have the first part of the effect ready, let’s start working on the clone part using masking.

First, place the second clip on a different window track, and the starting point is where you react to the “clone.”

Click here

Then, double-click the second clip and go to the Filmora setting window. Tap on the Mask section > Single line.

On the preview screen, adjust the position of the mask to only show “the clone.”

Set the blur strength on the setting to make a smoother edge transition.

Step3 If the timing of the two clips doesn’t match, you can fix it using the speed ramping feature on Filmora 11. To use it, double-click the second clip and select Speed > Speed Ramping > Customize.

Move the keyframe up to increase the speed. You can adjust it according to your needs.

Step4 Once you are satisfied, adjust the clip length on the timeline and make sure that both clips finish at the same time.

Extra tip: Add one more effect to make it more magical.

Step1 Open the Effects window and search for “up down 1.”

Step2 Drag and drop the effect onto the timeline where the first cut is set. Adjust the effect length to match the action.

Then, drag and drop the effect again in the transition between the first and the second clip. Adjust it to the appropriate length, then it will give a more dramatic effect.

Step3 You can playback and see how it looks on the preview screen.

Summary

Making a clone effect on video is easy using Filmora. You can use the same trick to create a fashion lookbook video or other creative content to make them more engaging. Let us know if you want to see more tutorials.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Once you have opened Filmora 11, follow the steps below:

Step1 Bring the first clip to the timeline and cut the clip where you pretend to yank and take off the jacket. Select and delete the unnecessary clip.

Step2 After you have the first part of the effect ready, let’s start working on the clone part using masking.

First, place the second clip on a different window track, and the starting point is where you react to the “clone.”

Then, double-click the second clip and go to the Filmora setting window. Tap on the Mask section > Single line.

On the preview screen, adjust the position of the mask to only show “the clone.”

Set the blur strength on the setting to make a smoother edge transition.

Step3 If the timing of the two clips doesn’t match, you can fix it using the speed ramping feature on Filmora 11. To use it, double-click the second clip and select Speed > Speed Ramping > Customize.

Move the keyframe up to increase the speed. You can adjust it according to your needs.

Step4 Once you are satisfied, adjust the clip length on the timeline and make sure that both clips finish at the same time.

Extra tip: Add one more effect to make it more magical.

Step1 Open the Effects window and search for “up down 1.”

Step2 Drag and drop the effect onto the timeline where the first cut is set. Adjust the effect length to match the action.

Then, drag and drop the effect again in the transition between the first and the second clip. Adjust it to the appropriate length, then it will give a more dramatic effect.

Step3 You can playback and see how it looks on the preview screen.

Summary

Making a clone effect on video is easy using Filmora. You can use the same trick to create a fashion lookbook video or other creative content to make them more engaging. Let us know if you want to see more tutorials.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Click here

Speed up Video on Splice

Controlling the speed of the video enables viewers to engage with the content much more actively. There are instances when you may have a lengthy video scene or audio segment that includes little-to-no essential information, and you wish to speed it up. The whole video or audio file can be sped up or slowed down, or only specific sections can. It is simple to perform with a splice speed up video. As a result, the project size and duration are reduced, and viewers are given clearer instructions on how to speed up the video on Splice.

This article will emphasize how to speed up videos on Splice, covering the procedures and alternatives that will assist you in producing splice speed up videos.

Part I. Beginner’s Guide to Splice

Free video editing software for iPhone and iPad is called Splice. Users may edit HD photos and videos with this simple-to-use tool to create a polished film perfect for sharing online. Transitions, cuts, borders, audio effects, background music, and voiceover are just a few of the many capabilities offered by the program. Videos are a great method to grab a potential client’s interest when using online marketing strategies. Splice makes it simple to combine images and videos from your iPhone to create a professional-looking video that will impress your viewers.

Splice has many fantastic tools that make editing videos simple. It offers several choices that video producers would find useful. The essential features are as follows.

• Add Music

You have two options: choose a song from a streaming provider, or record your voiceovers. Additionally, the Splice app offers a huge selection of music from its catalog.

• Edit Videos

Other fundamental editing features include the ability to merge, change the speed, and trim.

• Add Text

Text can be added to your video to further illustrate a certain event.

• Add an Image or Video Overlay

By including picture overlays, you may get more creative.

• Apply Cutting-edge Effects

You may edit, chop, or even merge your films using Splice. Similarly, you may add titles, change the tempo, and even highlight particular moments by slowing down your videos. You can also add effects for even more attractive looks.

• Upload your Video to Social Media

This function is quite helpful for showcasing your writing abilities to friends and possible clients.

Note: For a thorough review of the Splice video editing app, visit this full review passage.

Part II. How to Change Video Speed Using Splice App

Users can generate eye-catching videos for usage and export with Splice’s various effects and tools.

Here are the steps on how to speed up the video on Splice.

Step1 Tap the video you want to modify the pace of in the timeline, and it turns blue.

Click here

Step2 From the editing toolbar, choose Speed. Utilize the slider beneath the timeline to change the speed.

Best Alternative to Splice Video Editor For Changing Speed Of Videos

Splice was distinctive during this time. It has significantly reduced peoples’ travel costs compared to desktop video editing software because you never have to take a heavy laptop with you. Splice is different from a desktop editing program. If you purchase a desktop app, you’ll have access to more sophisticated tools and the capacity to store your data. Splice will only work for you if you want to make lengthy movies with loads of intricate effects.

However, you can use alternative editing programs instead of utilizing them on your computer. The Filmora video editor is a unique example with sufficient effects and plugins. Filmora’s user-friendly interface allows you to swiftly edit whatever video to a professional standard. Use its extensive resource packs to make your video a specific result.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Ultimate Guide to Customize Video Speed in Filmora

Method 1. Click the “Fast” or “Slow” Options to Change the Speed Automatically

Upon clicking your video clip, a tab will display several options to modify the speed of your video. You can choose from slow to fast options. Click each option to choose from the specific speed you want

Method 2. Change the Speed Uniformly with “Uniform Speed”

If you wish to change the uniform speed of your video clip, double-clip the video to access the Speed Panel. Adjust the speed slider based on your speed uniform preference.

Method 3. Use Speed Ramping In Filmora for Better Video Results

Speed ramping is evident as the action switches between slow, regular speed, and fast motion in innumerable action films and sports videos. When you progressively increase the pace of a video clip, this is called speed ramping. You have the option of changing pace swiftly or consistently in Filmora. It can vary the pace of the audio or video clips. Use the Speed Ramping feature in Filmora.

Double-click the media you want to speed up - choose Speed > Speed Ramping. Alternatively, right-click on the media and choose Speed Ramping. Another option is clicking the Speed icon > Speed Ramping in the toolbar.

The Speed Ramping tab will let you customize the speed line. Also, it provides you with 6 different templates you can use to enhance action footage. The templates are Bullet Time, Montage, Jumper, Hero Moment, Flash in, and Flash out. In case none of the templates appeal to you, you can create your own preset and save it.

The best thing about this feature is Filmora allows you to maintain the original audio pitch. Thus, it would not sound strange after speed-ramping the media.

Here’s how you can use the customization mode on the Speed Ramping panel.

1. Click Customize.
2. Place the playhead on the part of the video clip which you want to speed up or slow down.
3. Click Add to add a speed keyframe in that spot. Filmora will mark Speed Ramping on the media.
4. Drag the white dot in the adjustment panel to change the video speed. Drag it upwards to accelerate the video speed or downwards to decelerate it.

Splice Video Editor FAQs

1. Why can’t I upload projects when using Splice?

Relinking your Splice folder could help if you experience problems downloading or uploading projects. The cache folder in your Splice app can also be cleared to resolve most download problems. Splice may require more space than is available before exporting the movie, relying on your export preferences. Any stored files that are kept may also use space. For instance, the app may require up to 2 GB of storage space if your finished film is 1 GB.

If you’re experiencing trouble downloading samples from the website, check that your Splice account is logged in on both the website and the desktop client. If you’re not logged onto the same profile on both the website and the app, samples/packs you’ve purchased online won’t appear.

2. How to remove watermarks on my video saved from Splice?

• Android

You can choose between utilizing the Splice app and learning how to speed up video on the splice app or an online watermark removal tool to remove a watermark from Splice. Launch the application and choose the video you wish to modify. To erase any watermarks from your movie, click the three dots in the right corner of your screen and select “Watermarks.” Following that, you must submit your video to the software and adhere to the watermark removal instructions. Following that, you must submit your video to the software and adhere to the watermark removal instructions.

• iPhone

You must confirm that Splice is already loaded on your iPhone and is the most recent version. Open the program after installation, browse the project with the watermark and learn how to speed up video on iPhone with Splice. After selecting the watermark with a tap, click “Edit” from the menu in the screen’s top right-hand corner. You’ll now see a new tab labeled “Effects” immediately below the “Audio” tab; tap on it, and scroll down until you find the “Watermark” slider. To remove the watermark, slide it the entire way to the left. Your project is now free of the watermark.

Bottom Line

Most people need help to produce high-quality videos on their devices. Most often, they’ll need to transfer them to their computers for extensive editing and polishing. That’s no longer the case, particularly with the emergence of mobile editing programs like the Splice app. You can quickly and effortlessly produce high-quality video material with a few clicks.

Part II. How to Change Video Speed Using Splice App

Users can generate eye-catching videos for usage and export with Splice’s various effects and tools.

Here are the steps on how to speed up the video on Splice.

Step1 Tap the video you want to modify the pace of in the timeline, and it turns blue.

Step2 From the editing toolbar, choose Speed. Utilize the slider beneath the timeline to change the speed.

Best Alternative to Splice Video Editor For Changing Speed Of Videos

Splice was distinctive during this time. It has significantly reduced peoples’ travel costs compared to desktop video editing software because you never have to take a heavy laptop with you. Splice is different from a desktop editing program. If you purchase a desktop app, you’ll have access to more sophisticated tools and the capacity to store your data. Splice will only work for you if you want to make lengthy movies with loads of intricate effects.

However, you can use alternative editing programs instead of utilizing them on your computer. The Filmora video editor is a unique example with sufficient effects and plugins. Filmora’s user-friendly interface allows you to swiftly edit whatever video to a professional standard. Use its extensive resource packs to make your video a specific result.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Ultimate Guide to Customize Video Speed in Filmora

Method 1. Click the “Fast” or “Slow” Options to Change the Speed Automatically

Upon clicking your video clip, a tab will display several options to modify the speed of your video. You can choose from slow to fast options. Click each option to choose from the specific speed you want

Method 2. Change the Speed Uniformly with “Uniform Speed”

If you wish to change the uniform speed of your video clip, double-clip the video to access the Speed Panel. Adjust the speed slider based on your speed uniform preference.

Method 3. Use Speed Ramping In Filmora for Better Video Results

Speed ramping is evident as the action switches between slow, regular speed, and fast motion in innumerable action films and sports videos. When you progressively increase the pace of a video clip, this is called speed ramping. You have the option of changing pace swiftly or consistently in Filmora. It can vary the pace of the audio or video clips. Use the Speed Ramping feature in Filmora.

Double-click the media you want to speed up - choose Speed > Speed Ramping. Alternatively, right-click on the media and choose Speed Ramping. Another option is clicking the Speed icon > Speed Ramping in the toolbar.

The Speed Ramping tab will let you customize the speed line. Also, it provides you with 6 different templates you can use to enhance action footage. The templates are Bullet Time, Montage, Jumper, Hero Moment, Flash in, and Flash out. In case none of the templates appeal to you, you can create your own preset and save it.

The best thing about this feature is Filmora allows you to maintain the original audio pitch. Thus, it would not sound strange after speed-ramping the media.

Here’s how you can use the customization mode on the Speed Ramping panel.

1. Click Customize.
2. Place the playhead on the part of the video clip which you want to speed up or slow down.
3. Click Add to add a speed keyframe in that spot. Filmora will mark Speed Ramping on the media.
4. Drag the white dot in the adjustment panel to change the video speed. Drag it upwards to accelerate the video speed or downwards to decelerate it.

Splice Video Editor FAQs

1. Why can’t I upload projects when using Splice?

Relinking your Splice folder could help if you experience problems downloading or uploading projects. The cache folder in your Splice app can also be cleared to resolve most download problems. Splice may require more space than is available before exporting the movie, relying on your export preferences. Any stored files that are kept may also use space. For instance, the app may require up to 2 GB of storage space if your finished film is 1 GB.

If you’re experiencing trouble downloading samples from the website, check that your Splice account is logged in on both the website and the desktop client. If you’re not logged onto the same profile on both the website and the app, samples/packs you’ve purchased online won’t appear.

2. How to remove watermarks on my video saved from Splice?

• Android

You can choose between utilizing the Splice app and learning how to speed up video on the splice app or an online watermark removal tool to remove a watermark from Splice. Launch the application and choose the video you wish to modify. To erase any watermarks from your movie, click the three dots in the right corner of your screen and select “Watermarks.” Following that, you must submit your video to the software and adhere to the watermark removal instructions. Following that, you must submit your video to the software and adhere to the watermark removal instructions.

• iPhone

You must confirm that Splice is already loaded on your iPhone and is the most recent version. Open the program after installation, browse the project with the watermark and learn how to speed up video on iPhone with Splice. After selecting the watermark with a tap, click “Edit” from the menu in the screen’s top right-hand corner. You’ll now see a new tab labeled “Effects” immediately below the “Audio” tab; tap on it, and scroll down until you find the “Watermark” slider. To remove the watermark, slide it the entire way to the left. Your project is now free of the watermark.

Click here

Bottom Line

Most people need help to produce high-quality videos on their devices. Most often, they’ll need to transfer them to their computers for extensive editing and polishing. That’s no longer the case, particularly with the emergence of mobile editing programs like the Splice app. You can quickly and effortlessly produce high-quality video material with a few clicks.

Also read: