8 Best Video Editor with Useful Masking

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Masking video editing is the process of hiding or obscuring certain elements in a video clip. This can be done for aesthetic purposes and is often used to remove unwanted objects or blemishes from the footage. Masking can be accomplished using a variety of methods, including rotoscoping, chroma-keying, and motion tracking.

In this article

01 What is Masking?

02 Top 8 Video Editor with Useful Masking

What is Masking?

Masks are a feature of editing software that allows you to choose a particular portion of the video or utilize video overlays to hide, duplicate, reveal, or change your footage. The mask is the portion of the video you’ve chosen to pick, either with a template or a custom frame. The mask then becomes isolated, and you may modify it as desired to produce your intended effect.

Masks may be used to do some fantastic things with your videos. You can clone people or objects, overlay several pictures, create glitch effects, blur faces out, etc. Masks add a lot of excitement and color to videos, making them more dynamic, enjoyable to watch, and professional. It can draw attention - and keep it!

Different types of masking

There are three primary types of masking: rotoscoping, chroma-keying, and motion tracking.

Rotoscoping: Rotoscoping is the process of manually tracing an object in a video frame by frame to create a mask. This can be a time-consuming process, but it allows for very precise control over the masked area.

Chroma-keying: Chroma-keying is a type of masking that makes use of color to isolate a particular area of the frame. For example, this is often used to remove a green or blue screen from the footage, but can also be used to isolate other colors.

Motion tracking: Motion tracking is a masking technique that allows you to track the movement of an object in a video clip. This is often used to add special effects, such as explosions, to a video.

Top 8 Video Editor with Useful Masking

Here is the list of Top 8 Video Editors with useful masking Features

1. Adobe Premiere Pro

Adobe Premiere Pro is a professional video editing software with a wide range of features and precise masking controls. It allows you to create custom masks or use the built-in rotoscope tool to isolate objects in your footage quickly.

How to Create a Mask in Premiere Pro

Do you understand how to construct a mask in Adobe Premiere? Shape tools and pen tools may be used to make the Adobe premiere mask.

By Using Shape Tools:
Select the shape tool you’d like to utilize from the Tools panel.
Then, create a mask by drawing a shape on the video clip in the Timeline.

By Using Pen Tools:
Click the pen tool icon in the Tools panel.
Click and drag to draw a path around the object you wish to isolate.
After drawing your path, click the “Mask” button in the Tools panel.

2. Final Cut Pro X

Final Cut Pro X is a proficient video editing software with powerful masking tools. It allows you to create custom masks or isolate objects in your footage.

How to Create a Mask in Final Cut Pro X

With little effort, the Shape Mask tool allows you to make a mask in any shape on the continuum, ranging from an ellipse to a rectangle.

The Shape Mask is a simple mask that may be changed to editable control points in order to create complex bespoke masks (converting it into a Draw Mask).

• Open the Final Cut Pro project and select the clip you wish to mask.
  Note: You can’t composite a clip over another one while using isolated clips. Final Cut Pro has this option, which you may find in the Comping window.
• To make a clip transparent, select it in the timeline and place the play head at a point within the video clip that shows the portion you wish to make transparent.
• Click the Effects button in the top-right corner of the timeline (or press Command-5) to display the Effects browser.
• Select the Shape Mask effect in the Effects Browser.

Tip: Type “shape” in the Effects browser search bar to quickly locate the Shape Mask effect.

To apply the masking effect to the clip in the timeline, choose one of the following options:

1. Drag the effect to the timeline clip.
2. Double-click the effect thumbnail in the Effects browser to apply it.
3. Use the on-screen controls to modify the shape mask if necessary.

The controls for the Shape Mask appear in the viewer, overlaid on top of the video image. In addition, the Effects area of the Video inspector displays the Shape Mask options. By default, the Shape Mask is set to a partially feathered ellipse shape in the center of the frame.

3. Wondershare Filmora

Filmora 11 is an easy to use video editor with useful masking features. It provides various of masking presets to make masking easy for you. If you are looking for Green Screen, Filmora also covers you. Its Chroma Key allows you to remove the background of almost any color.

Masking in Filmora 11

Filmora 11 has been modified to allow for the masking of keyframes. First, double-click the clip on your timeline to open a settings window in the library. Then, in the videos area, select the “Mask” option. Multiple forms may be selected here.

We picked the ‘Star’ form for this project. After selecting it, you may drag the shape to your clip in the preview area.

Scrolling down in the Windows category will take you to more options where you can change the scale, position, width, height, and radius of your chosen shape. You may also lessen the strength of the form and rotate it to make it blend in better with the other elements you’re trying to hide in your window.

To add the keyframe, simply hit the “Add” button after completing it. You may then modify the mask’s form to match the added frame.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

4. Avid Media Composer

Avid Media Composer has a comprehensive masking feature for video editors of different levels. You can either use the built-in masking tools or make your own one.

Masking in Avid Media Composer

In the Masking Effect window, you can choose to either create a new mask or use an existing one. First, select the “Create Mask” option and then click on the “Draw Mask” button to create a new mask.

This will open up the Draw Mask window, where you can draw your mask using the various tools provided. To apply the mask, simply click the “Apply” button.

If you want to use an existing mask, select the “Use Mask” option and then choose the mask you want to use from the drop-down menu.

5. Sony Vegas Pro

Sony Vegas Pro is a professional video editing software with robust masking tools. The interface of the editor may looks complicated for beginners, yet once you get familiar with it, you will be amazed by what you can achieve with the Vegas Pro.

Masking in Sony Vegas Pro

Step 1: Drag the clip from the Explorer or Project Media windows and drop it on the timeline. Then, look for another video that is quite distinct from the first.

Step 2: Drag it to the timeline below the first video event. A new track will be created. Place the original event directly beneath the video occurrence.

The Video Preview window does not display the second video because it is covered by the first video, which resembles one photo sitting on top of another in a stack. So to view the lower clip, we’ll need to add a mask.

6. Magix Movie Edit Pro

Magix Movie Edit Pro is another video editor that is great for adding masks to your video. It is famous for its ease-of-learn and stable rendering. When it comes to masking, it is also quite powerful.

Masking in Magix Movie Edit Pro

They let you apply special effects to only certain parts of a video. You may dramatically improve the aspect of your movies with this Magix Movie Edit Pro Plus feature.

When you apply color effects to the software’s template, it appears that you can only use color effects.

To add additional effects to specific portions of the shot, simply import an image and apply the Alpha Mask property from the Chroma Key menu. Then you must duplicate the video section and place it on a lower track, while keeping the alpha mask picture in between the two videos (click the graphic above for a visual guide).

7. Studio

Studio is a pro-level video editing software. It is preloaded with pro-caliber tool and premium effects to help you create the videos you want. We will show you how to apply masking in Studio in the following paragraphs.

Masking in Studio

Select the clip you want to overlay your media on, then click the ‘Mask’ button on the editing toolbar. After that, open the mask creation window by clicking ‘Create Mask.

First, click “Create Panel” to create a video mask panel.

To make a panel, use the panel of tools on the left side of the preview window. They’ll only be shown in your video when you add assets later if they’re inside this panel. Keep in mind that you may modify the size and placement of your asset within the panel and the panel itself; therefore, you might need to.

To access the media selection possibilities, click on the ‘Asset’ tab of the mask creation window. To discover the picture or video you want to include in your panel, go through your imported files by selecting ‘Select media.’ After that, select the media to be included in your panel video mask and hit ‘Apply.’

Use the left-hand slider or the resizing box in the preview window on the right to change the size and placement of your media in your panel video mask.

To adjust the 3D position of your panel video mask, go to the ‘3D’ tab of the mask creation window.

8. CyberLink PowerDirector

CyberLink PowerDirector has recently enhanced its mask & blend feature to help you create artistic scenes. If you are interested in the feature, you can try it out.

Masking in CyberLink PowerDirector

Drag and drop a photo from the media room into track 2 of your timeline, then drag the background image into track 1.

Then, go to the Quick Settings menu (press the Menu button at the bottom of your screen), select Cloud Print from the drop-down menu, and then select your photo. Then open up the design interface by selecting Mask Designer from the drop-down menu.

You may select from a variety of templates in the Mask Designer. If you want to make your own mask shape, the Mask Designer has three alternatives for you to create new mask types.

Create an image mask: You may use any picture or video, and it will be resized to fit the shape.

Create a text mask: Enter the text you’d like to appear in your photo. Then, go to the left side of the panel under Font/Paragraph on the left side for font style, size, and other options. To alter the text mask itself, go to the preview window and resize it on the left panel.

Conclusion

● Maybe you want to add a picture-in-picture effect, or maybe you want to replace the background with a new image. Whatever the reason, it’s easy to do with most video editing software. We’ve shown you how to mask videos in eight different editors in this article. So now you can get started creating your own custom videos!

Try It Free Try It Free

Masking video editing is the process of hiding or obscuring certain elements in a video clip. This can be done for aesthetic purposes and is often used to remove unwanted objects or blemishes from the footage. Masking can be accomplished using a variety of methods, including rotoscoping, chroma-keying, and motion tracking.

In this article

01 What is Masking?

02 Top 8 Video Editor with Useful Masking

What is Masking?

Masks are a feature of editing software that allows you to choose a particular portion of the video or utilize video overlays to hide, duplicate, reveal, or change your footage. The mask is the portion of the video you’ve chosen to pick, either with a template or a custom frame. The mask then becomes isolated, and you may modify it as desired to produce your intended effect.

Masks may be used to do some fantastic things with your videos. You can clone people or objects, overlay several pictures, create glitch effects, blur faces out, etc. Masks add a lot of excitement and color to videos, making them more dynamic, enjoyable to watch, and professional. It can draw attention - and keep it!

Different types of masking

There are three primary types of masking: rotoscoping, chroma-keying, and motion tracking.

Rotoscoping: Rotoscoping is the process of manually tracing an object in a video frame by frame to create a mask. This can be a time-consuming process, but it allows for very precise control over the masked area.

Chroma-keying: Chroma-keying is a type of masking that makes use of color to isolate a particular area of the frame. For example, this is often used to remove a green or blue screen from the footage, but can also be used to isolate other colors.

Motion tracking: Motion tracking is a masking technique that allows you to track the movement of an object in a video clip. This is often used to add special effects, such as explosions, to a video.

Top 8 Video Editor with Useful Masking

Here is the list of Top 8 Video Editors with useful masking Features

1. Adobe Premiere Pro

Adobe Premiere Pro is a professional video editing software with a wide range of features and precise masking controls. It allows you to create custom masks or use the built-in rotoscope tool to isolate objects in your footage quickly.

How to Create a Mask in Premiere Pro

Do you understand how to construct a mask in Adobe Premiere? Shape tools and pen tools may be used to make the Adobe premiere mask.

By Using Shape Tools:
Select the shape tool you’d like to utilize from the Tools panel.
Then, create a mask by drawing a shape on the video clip in the Timeline.

By Using Pen Tools:
Click the pen tool icon in the Tools panel.
Click and drag to draw a path around the object you wish to isolate.
After drawing your path, click the “Mask” button in the Tools panel.

2. Final Cut Pro X

Final Cut Pro X is a proficient video editing software with powerful masking tools. It allows you to create custom masks or isolate objects in your footage.

How to Create a Mask in Final Cut Pro X

With little effort, the Shape Mask tool allows you to make a mask in any shape on the continuum, ranging from an ellipse to a rectangle.

The Shape Mask is a simple mask that may be changed to editable control points in order to create complex bespoke masks (converting it into a Draw Mask).

• Open the Final Cut Pro project and select the clip you wish to mask.
  Note: You can’t composite a clip over another one while using isolated clips. Final Cut Pro has this option, which you may find in the Comping window.
• To make a clip transparent, select it in the timeline and place the play head at a point within the video clip that shows the portion you wish to make transparent.
• Click the Effects button in the top-right corner of the timeline (or press Command-5) to display the Effects browser.
• Select the Shape Mask effect in the Effects Browser.

Tip: Type “shape” in the Effects browser search bar to quickly locate the Shape Mask effect.

To apply the masking effect to the clip in the timeline, choose one of the following options:

1. Drag the effect to the timeline clip.
2. Double-click the effect thumbnail in the Effects browser to apply it.
3. Use the on-screen controls to modify the shape mask if necessary.

The controls for the Shape Mask appear in the viewer, overlaid on top of the video image. In addition, the Effects area of the Video inspector displays the Shape Mask options. By default, the Shape Mask is set to a partially feathered ellipse shape in the center of the frame.

3. Wondershare Filmora

Filmora 11 is an easy to use video editor with useful masking features. It provides various of masking presets to make masking easy for you. If you are looking for Green Screen, Filmora also covers you. Its Chroma Key allows you to remove the background of almost any color.

Masking in Filmora 11

Filmora 11 has been modified to allow for the masking of keyframes. First, double-click the clip on your timeline to open a settings window in the library. Then, in the videos area, select the “Mask” option. Multiple forms may be selected here.

We picked the ‘Star’ form for this project. After selecting it, you may drag the shape to your clip in the preview area.

Scrolling down in the Windows category will take you to more options where you can change the scale, position, width, height, and radius of your chosen shape. You may also lessen the strength of the form and rotate it to make it blend in better with the other elements you’re trying to hide in your window.

To add the keyframe, simply hit the “Add” button after completing it. You may then modify the mask’s form to match the added frame.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

4. Avid Media Composer

Avid Media Composer has a comprehensive masking feature for video editors of different levels. You can either use the built-in masking tools or make your own one.

Masking in Avid Media Composer

In the Masking Effect window, you can choose to either create a new mask or use an existing one. First, select the “Create Mask” option and then click on the “Draw Mask” button to create a new mask.

This will open up the Draw Mask window, where you can draw your mask using the various tools provided. To apply the mask, simply click the “Apply” button.

If you want to use an existing mask, select the “Use Mask” option and then choose the mask you want to use from the drop-down menu.

5. Sony Vegas Pro

Sony Vegas Pro is a professional video editing software with robust masking tools. The interface of the editor may looks complicated for beginners, yet once you get familiar with it, you will be amazed by what you can achieve with the Vegas Pro.

Masking in Sony Vegas Pro

Step 1: Drag the clip from the Explorer or Project Media windows and drop it on the timeline. Then, look for another video that is quite distinct from the first.

Step 2: Drag it to the timeline below the first video event. A new track will be created. Place the original event directly beneath the video occurrence.

The Video Preview window does not display the second video because it is covered by the first video, which resembles one photo sitting on top of another in a stack. So to view the lower clip, we’ll need to add a mask.

6. Magix Movie Edit Pro

Magix Movie Edit Pro is another video editor that is great for adding masks to your video. It is famous for its ease-of-learn and stable rendering. When it comes to masking, it is also quite powerful.

Masking in Magix Movie Edit Pro

They let you apply special effects to only certain parts of a video. You may dramatically improve the aspect of your movies with this Magix Movie Edit Pro Plus feature.

When you apply color effects to the software’s template, it appears that you can only use color effects.

To add additional effects to specific portions of the shot, simply import an image and apply the Alpha Mask property from the Chroma Key menu. Then you must duplicate the video section and place it on a lower track, while keeping the alpha mask picture in between the two videos (click the graphic above for a visual guide).

7. Studio

Studio is a pro-level video editing software. It is preloaded with pro-caliber tool and premium effects to help you create the videos you want. We will show you how to apply masking in Studio in the following paragraphs.

Masking in Studio

Select the clip you want to overlay your media on, then click the ‘Mask’ button on the editing toolbar. After that, open the mask creation window by clicking ‘Create Mask.

First, click “Create Panel” to create a video mask panel.

To make a panel, use the panel of tools on the left side of the preview window. They’ll only be shown in your video when you add assets later if they’re inside this panel. Keep in mind that you may modify the size and placement of your asset within the panel and the panel itself; therefore, you might need to.

To access the media selection possibilities, click on the ‘Asset’ tab of the mask creation window. To discover the picture or video you want to include in your panel, go through your imported files by selecting ‘Select media.’ After that, select the media to be included in your panel video mask and hit ‘Apply.’

Use the left-hand slider or the resizing box in the preview window on the right to change the size and placement of your media in your panel video mask.

To adjust the 3D position of your panel video mask, go to the ‘3D’ tab of the mask creation window.

8. CyberLink PowerDirector

CyberLink PowerDirector has recently enhanced its mask & blend feature to help you create artistic scenes. If you are interested in the feature, you can try it out.

Masking in CyberLink PowerDirector

Drag and drop a photo from the media room into track 2 of your timeline, then drag the background image into track 1.

Then, go to the Quick Settings menu (press the Menu button at the bottom of your screen), select Cloud Print from the drop-down menu, and then select your photo. Then open up the design interface by selecting Mask Designer from the drop-down menu.

You may select from a variety of templates in the Mask Designer. If you want to make your own mask shape, the Mask Designer has three alternatives for you to create new mask types.

Create an image mask: You may use any picture or video, and it will be resized to fit the shape.

Create a text mask: Enter the text you’d like to appear in your photo. Then, go to the left side of the panel under Font/Paragraph on the left side for font style, size, and other options. To alter the text mask itself, go to the preview window and resize it on the left panel.

Conclusion

● Maybe you want to add a picture-in-picture effect, or maybe you want to replace the background with a new image. Whatever the reason, it’s easy to do with most video editing software. We’ve shown you how to mask videos in eight different editors in this article. So now you can get started creating your own custom videos!

Try It Free Try It Free

Masking video editing is the process of hiding or obscuring certain elements in a video clip. This can be done for aesthetic purposes and is often used to remove unwanted objects or blemishes from the footage. Masking can be accomplished using a variety of methods, including rotoscoping, chroma-keying, and motion tracking.

In this article

01 What is Masking?

02 Top 8 Video Editor with Useful Masking

What is Masking?

Masks are a feature of editing software that allows you to choose a particular portion of the video or utilize video overlays to hide, duplicate, reveal, or change your footage. The mask is the portion of the video you’ve chosen to pick, either with a template or a custom frame. The mask then becomes isolated, and you may modify it as desired to produce your intended effect.

Masks may be used to do some fantastic things with your videos. You can clone people or objects, overlay several pictures, create glitch effects, blur faces out, etc. Masks add a lot of excitement and color to videos, making them more dynamic, enjoyable to watch, and professional. It can draw attention - and keep it!

Different types of masking

There are three primary types of masking: rotoscoping, chroma-keying, and motion tracking.

Rotoscoping: Rotoscoping is the process of manually tracing an object in a video frame by frame to create a mask. This can be a time-consuming process, but it allows for very precise control over the masked area.

Chroma-keying: Chroma-keying is a type of masking that makes use of color to isolate a particular area of the frame. For example, this is often used to remove a green or blue screen from the footage, but can also be used to isolate other colors.

Motion tracking: Motion tracking is a masking technique that allows you to track the movement of an object in a video clip. This is often used to add special effects, such as explosions, to a video.

Top 8 Video Editor with Useful Masking

Here is the list of Top 8 Video Editors with useful masking Features

1. Adobe Premiere Pro

Adobe Premiere Pro is a professional video editing software with a wide range of features and precise masking controls. It allows you to create custom masks or use the built-in rotoscope tool to isolate objects in your footage quickly.

How to Create a Mask in Premiere Pro

Do you understand how to construct a mask in Adobe Premiere? Shape tools and pen tools may be used to make the Adobe premiere mask.

By Using Shape Tools:
Select the shape tool you’d like to utilize from the Tools panel.
Then, create a mask by drawing a shape on the video clip in the Timeline.

By Using Pen Tools:
Click the pen tool icon in the Tools panel.
Click and drag to draw a path around the object you wish to isolate.
After drawing your path, click the “Mask” button in the Tools panel.

2. Final Cut Pro X

Final Cut Pro X is a proficient video editing software with powerful masking tools. It allows you to create custom masks or isolate objects in your footage.

How to Create a Mask in Final Cut Pro X

With little effort, the Shape Mask tool allows you to make a mask in any shape on the continuum, ranging from an ellipse to a rectangle.

The Shape Mask is a simple mask that may be changed to editable control points in order to create complex bespoke masks (converting it into a Draw Mask).

• Open the Final Cut Pro project and select the clip you wish to mask.
  Note: You can’t composite a clip over another one while using isolated clips. Final Cut Pro has this option, which you may find in the Comping window.
• To make a clip transparent, select it in the timeline and place the play head at a point within the video clip that shows the portion you wish to make transparent.
• Click the Effects button in the top-right corner of the timeline (or press Command-5) to display the Effects browser.
• Select the Shape Mask effect in the Effects Browser.

Tip: Type “shape” in the Effects browser search bar to quickly locate the Shape Mask effect.

To apply the masking effect to the clip in the timeline, choose one of the following options:

1. Drag the effect to the timeline clip.
2. Double-click the effect thumbnail in the Effects browser to apply it.
3. Use the on-screen controls to modify the shape mask if necessary.

The controls for the Shape Mask appear in the viewer, overlaid on top of the video image. In addition, the Effects area of the Video inspector displays the Shape Mask options. By default, the Shape Mask is set to a partially feathered ellipse shape in the center of the frame.

3. Wondershare Filmora

Filmora 11 is an easy to use video editor with useful masking features. It provides various of masking presets to make masking easy for you. If you are looking for Green Screen, Filmora also covers you. Its Chroma Key allows you to remove the background of almost any color.

Masking in Filmora 11

Filmora 11 has been modified to allow for the masking of keyframes. First, double-click the clip on your timeline to open a settings window in the library. Then, in the videos area, select the “Mask” option. Multiple forms may be selected here.

We picked the ‘Star’ form for this project. After selecting it, you may drag the shape to your clip in the preview area.

Scrolling down in the Windows category will take you to more options where you can change the scale, position, width, height, and radius of your chosen shape. You may also lessen the strength of the form and rotate it to make it blend in better with the other elements you’re trying to hide in your window.

To add the keyframe, simply hit the “Add” button after completing it. You may then modify the mask’s form to match the added frame.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

4. Avid Media Composer

Avid Media Composer has a comprehensive masking feature for video editors of different levels. You can either use the built-in masking tools or make your own one.

Masking in Avid Media Composer

In the Masking Effect window, you can choose to either create a new mask or use an existing one. First, select the “Create Mask” option and then click on the “Draw Mask” button to create a new mask.

This will open up the Draw Mask window, where you can draw your mask using the various tools provided. To apply the mask, simply click the “Apply” button.

If you want to use an existing mask, select the “Use Mask” option and then choose the mask you want to use from the drop-down menu.

5. Sony Vegas Pro

Sony Vegas Pro is a professional video editing software with robust masking tools. The interface of the editor may looks complicated for beginners, yet once you get familiar with it, you will be amazed by what you can achieve with the Vegas Pro.

Masking in Sony Vegas Pro

Step 1: Drag the clip from the Explorer or Project Media windows and drop it on the timeline. Then, look for another video that is quite distinct from the first.

Step 2: Drag it to the timeline below the first video event. A new track will be created. Place the original event directly beneath the video occurrence.

The Video Preview window does not display the second video because it is covered by the first video, which resembles one photo sitting on top of another in a stack. So to view the lower clip, we’ll need to add a mask.

6. Magix Movie Edit Pro

Magix Movie Edit Pro is another video editor that is great for adding masks to your video. It is famous for its ease-of-learn and stable rendering. When it comes to masking, it is also quite powerful.

Masking in Magix Movie Edit Pro

They let you apply special effects to only certain parts of a video. You may dramatically improve the aspect of your movies with this Magix Movie Edit Pro Plus feature.

When you apply color effects to the software’s template, it appears that you can only use color effects.

To add additional effects to specific portions of the shot, simply import an image and apply the Alpha Mask property from the Chroma Key menu. Then you must duplicate the video section and place it on a lower track, while keeping the alpha mask picture in between the two videos (click the graphic above for a visual guide).

7. Studio

Studio is a pro-level video editing software. It is preloaded with pro-caliber tool and premium effects to help you create the videos you want. We will show you how to apply masking in Studio in the following paragraphs.

Masking in Studio

Select the clip you want to overlay your media on, then click the ‘Mask’ button on the editing toolbar. After that, open the mask creation window by clicking ‘Create Mask.

First, click “Create Panel” to create a video mask panel.

To make a panel, use the panel of tools on the left side of the preview window. They’ll only be shown in your video when you add assets later if they’re inside this panel. Keep in mind that you may modify the size and placement of your asset within the panel and the panel itself; therefore, you might need to.

To access the media selection possibilities, click on the ‘Asset’ tab of the mask creation window. To discover the picture or video you want to include in your panel, go through your imported files by selecting ‘Select media.’ After that, select the media to be included in your panel video mask and hit ‘Apply.’

Use the left-hand slider or the resizing box in the preview window on the right to change the size and placement of your media in your panel video mask.

To adjust the 3D position of your panel video mask, go to the ‘3D’ tab of the mask creation window.

8. CyberLink PowerDirector

CyberLink PowerDirector has recently enhanced its mask & blend feature to help you create artistic scenes. If you are interested in the feature, you can try it out.

Masking in CyberLink PowerDirector

Drag and drop a photo from the media room into track 2 of your timeline, then drag the background image into track 1.

Then, go to the Quick Settings menu (press the Menu button at the bottom of your screen), select Cloud Print from the drop-down menu, and then select your photo. Then open up the design interface by selecting Mask Designer from the drop-down menu.

You may select from a variety of templates in the Mask Designer. If you want to make your own mask shape, the Mask Designer has three alternatives for you to create new mask types.

Create an image mask: You may use any picture or video, and it will be resized to fit the shape.

Create a text mask: Enter the text you’d like to appear in your photo. Then, go to the left side of the panel under Font/Paragraph on the left side for font style, size, and other options. To alter the text mask itself, go to the preview window and resize it on the left panel.

Conclusion

● Maybe you want to add a picture-in-picture effect, or maybe you want to replace the background with a new image. Whatever the reason, it’s easy to do with most video editing software. We’ve shown you how to mask videos in eight different editors in this article. So now you can get started creating your own custom videos!

Try It Free Try It Free

Masking video editing is the process of hiding or obscuring certain elements in a video clip. This can be done for aesthetic purposes and is often used to remove unwanted objects or blemishes from the footage. Masking can be accomplished using a variety of methods, including rotoscoping, chroma-keying, and motion tracking.

In this article

01 What is Masking?

02 Top 8 Video Editor with Useful Masking

What is Masking?

Masks are a feature of editing software that allows you to choose a particular portion of the video or utilize video overlays to hide, duplicate, reveal, or change your footage. The mask is the portion of the video you’ve chosen to pick, either with a template or a custom frame. The mask then becomes isolated, and you may modify it as desired to produce your intended effect.

Masks may be used to do some fantastic things with your videos. You can clone people or objects, overlay several pictures, create glitch effects, blur faces out, etc. Masks add a lot of excitement and color to videos, making them more dynamic, enjoyable to watch, and professional. It can draw attention - and keep it!

Different types of masking

There are three primary types of masking: rotoscoping, chroma-keying, and motion tracking.

Rotoscoping: Rotoscoping is the process of manually tracing an object in a video frame by frame to create a mask. This can be a time-consuming process, but it allows for very precise control over the masked area.

Chroma-keying: Chroma-keying is a type of masking that makes use of color to isolate a particular area of the frame. For example, this is often used to remove a green or blue screen from the footage, but can also be used to isolate other colors.

Motion tracking: Motion tracking is a masking technique that allows you to track the movement of an object in a video clip. This is often used to add special effects, such as explosions, to a video.

Top 8 Video Editor with Useful Masking

Here is the list of Top 8 Video Editors with useful masking Features

1. Adobe Premiere Pro

Adobe Premiere Pro is a professional video editing software with a wide range of features and precise masking controls. It allows you to create custom masks or use the built-in rotoscope tool to isolate objects in your footage quickly.

How to Create a Mask in Premiere Pro

Do you understand how to construct a mask in Adobe Premiere? Shape tools and pen tools may be used to make the Adobe premiere mask.

By Using Shape Tools:
Select the shape tool you’d like to utilize from the Tools panel.
Then, create a mask by drawing a shape on the video clip in the Timeline.

By Using Pen Tools:
Click the pen tool icon in the Tools panel.
Click and drag to draw a path around the object you wish to isolate.
After drawing your path, click the “Mask” button in the Tools panel.

2. Final Cut Pro X

Final Cut Pro X is a proficient video editing software with powerful masking tools. It allows you to create custom masks or isolate objects in your footage.

How to Create a Mask in Final Cut Pro X

With little effort, the Shape Mask tool allows you to make a mask in any shape on the continuum, ranging from an ellipse to a rectangle.

The Shape Mask is a simple mask that may be changed to editable control points in order to create complex bespoke masks (converting it into a Draw Mask).

• Open the Final Cut Pro project and select the clip you wish to mask.
  Note: You can’t composite a clip over another one while using isolated clips. Final Cut Pro has this option, which you may find in the Comping window.
• To make a clip transparent, select it in the timeline and place the play head at a point within the video clip that shows the portion you wish to make transparent.
• Click the Effects button in the top-right corner of the timeline (or press Command-5) to display the Effects browser.
• Select the Shape Mask effect in the Effects Browser.

Tip: Type “shape” in the Effects browser search bar to quickly locate the Shape Mask effect.

To apply the masking effect to the clip in the timeline, choose one of the following options:

1. Drag the effect to the timeline clip.
2. Double-click the effect thumbnail in the Effects browser to apply it.
3. Use the on-screen controls to modify the shape mask if necessary.

The controls for the Shape Mask appear in the viewer, overlaid on top of the video image. In addition, the Effects area of the Video inspector displays the Shape Mask options. By default, the Shape Mask is set to a partially feathered ellipse shape in the center of the frame.

3. Wondershare Filmora

Filmora 11 is an easy to use video editor with useful masking features. It provides various of masking presets to make masking easy for you. If you are looking for Green Screen, Filmora also covers you. Its Chroma Key allows you to remove the background of almost any color.

Masking in Filmora 11

Filmora 11 has been modified to allow for the masking of keyframes. First, double-click the clip on your timeline to open a settings window in the library. Then, in the videos area, select the “Mask” option. Multiple forms may be selected here.

We picked the ‘Star’ form for this project. After selecting it, you may drag the shape to your clip in the preview area.

Scrolling down in the Windows category will take you to more options where you can change the scale, position, width, height, and radius of your chosen shape. You may also lessen the strength of the form and rotate it to make it blend in better with the other elements you’re trying to hide in your window.

To add the keyframe, simply hit the “Add” button after completing it. You may then modify the mask’s form to match the added frame.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

4. Avid Media Composer

Avid Media Composer has a comprehensive masking feature for video editors of different levels. You can either use the built-in masking tools or make your own one.

Masking in Avid Media Composer

In the Masking Effect window, you can choose to either create a new mask or use an existing one. First, select the “Create Mask” option and then click on the “Draw Mask” button to create a new mask.

This will open up the Draw Mask window, where you can draw your mask using the various tools provided. To apply the mask, simply click the “Apply” button.

If you want to use an existing mask, select the “Use Mask” option and then choose the mask you want to use from the drop-down menu.

5. Sony Vegas Pro

Sony Vegas Pro is a professional video editing software with robust masking tools. The interface of the editor may looks complicated for beginners, yet once you get familiar with it, you will be amazed by what you can achieve with the Vegas Pro.

Masking in Sony Vegas Pro

Step 1: Drag the clip from the Explorer or Project Media windows and drop it on the timeline. Then, look for another video that is quite distinct from the first.

Step 2: Drag it to the timeline below the first video event. A new track will be created. Place the original event directly beneath the video occurrence.

The Video Preview window does not display the second video because it is covered by the first video, which resembles one photo sitting on top of another in a stack. So to view the lower clip, we’ll need to add a mask.

6. Magix Movie Edit Pro

Magix Movie Edit Pro is another video editor that is great for adding masks to your video. It is famous for its ease-of-learn and stable rendering. When it comes to masking, it is also quite powerful.

Masking in Magix Movie Edit Pro

They let you apply special effects to only certain parts of a video. You may dramatically improve the aspect of your movies with this Magix Movie Edit Pro Plus feature.

When you apply color effects to the software’s template, it appears that you can only use color effects.

To add additional effects to specific portions of the shot, simply import an image and apply the Alpha Mask property from the Chroma Key menu. Then you must duplicate the video section and place it on a lower track, while keeping the alpha mask picture in between the two videos (click the graphic above for a visual guide).

7. Studio

Studio is a pro-level video editing software. It is preloaded with pro-caliber tool and premium effects to help you create the videos you want. We will show you how to apply masking in Studio in the following paragraphs.

Masking in Studio

Select the clip you want to overlay your media on, then click the ‘Mask’ button on the editing toolbar. After that, open the mask creation window by clicking ‘Create Mask.

First, click “Create Panel” to create a video mask panel.

To make a panel, use the panel of tools on the left side of the preview window. They’ll only be shown in your video when you add assets later if they’re inside this panel. Keep in mind that you may modify the size and placement of your asset within the panel and the panel itself; therefore, you might need to.

To access the media selection possibilities, click on the ‘Asset’ tab of the mask creation window. To discover the picture or video you want to include in your panel, go through your imported files by selecting ‘Select media.’ After that, select the media to be included in your panel video mask and hit ‘Apply.’

Use the left-hand slider or the resizing box in the preview window on the right to change the size and placement of your media in your panel video mask.

To adjust the 3D position of your panel video mask, go to the ‘3D’ tab of the mask creation window.

8. CyberLink PowerDirector

CyberLink PowerDirector has recently enhanced its mask & blend feature to help you create artistic scenes. If you are interested in the feature, you can try it out.

Masking in CyberLink PowerDirector

Drag and drop a photo from the media room into track 2 of your timeline, then drag the background image into track 1.

Then, go to the Quick Settings menu (press the Menu button at the bottom of your screen), select Cloud Print from the drop-down menu, and then select your photo. Then open up the design interface by selecting Mask Designer from the drop-down menu.

You may select from a variety of templates in the Mask Designer. If you want to make your own mask shape, the Mask Designer has three alternatives for you to create new mask types.

Create an image mask: You may use any picture or video, and it will be resized to fit the shape.

Create a text mask: Enter the text you’d like to appear in your photo. Then, go to the left side of the panel under Font/Paragraph on the left side for font style, size, and other options. To alter the text mask itself, go to the preview window and resize it on the left panel.

Conclusion

● Maybe you want to add a picture-in-picture effect, or maybe you want to replace the background with a new image. Whatever the reason, it’s easy to do with most video editing software. We’ve shown you how to mask videos in eight different editors in this article. So now you can get started creating your own custom videos!

The Audio You Produce Will Inevitably Be Flawed Throughout the Production Process. So, Learn How Adobe Audition Removes Echo to Sound Better Instead of Throwing It Away

With its various potent tools, Adobe Audition enables audio producers to obtain the absolute best results from their recordings. Adobe Audition removes echo and will have something that will assist you in bringing everything back under control so that your audio sounds great, regardless of whether the problem is unruly instruments or rowdy hosts.

When recording audio, there are numerous factors to consider. Some spaces can generate more reverb than others, like a cluttered echo effect due to various factors, including reflective surfaces, distant objects, and large, cavernous spaces. This will allow you to remove echo auditions for use in podcasts, movies, and musical compositions.

Part 1: How to Remove Echo with Adobe Audition?

Producers may use various compelling features in Adobe Audition to get the most out of your audio. Whether rogue hosts or instruments, Adobe Audition has a solution to help you regain control and make your audio sound great. We’ll demonstrate how to eliminate echo in Adobe Audition in this tutorial. Adobe Auditions can reduce echo from your video files in a few steps. Want to learn how?

Well, here are the five prime steps.

Step1 Pick Audio

Load the project you are currently working on in Audition, and then choose the audio file with the echo that needs removal. Choose a segment of the waveform that is relatively quiet to eliminate some of the ambient noise that your camera or another nearby device may have caused.

Select “Capture Noise Print” from the contextual menu visible when you right-click on the portion. This will assist the Audition in differentiating the primary audio from any background noise.

Step2 Begin Noise Removal

Select the noise that you want to get rid of, and then go to “Effects” > “Noise Reduction / Restoration” > “Noise Reduction (process).” After selecting “Select Entire File,” play your audio file again to see whether the background noise got eliminated.

You may also make the gating effect more noticeable by going to the Advanced tab and lowering the Spectral Decay Rate. When satisfied with the adjustments, you may make them permanent by clicking the “Apply” button.

Step3 Add Effects

Next, choose “Dynamics Processing” from the “Effects” menu after clicking on “Amplitude and Compression.”

This will load an effect like compression, which you can then utilize to modify the waveform. You should be able to see a diagonal line that extends from one side of the Dynamics Processing display to the other when you first launch the program. It will affect the echo if you drag on this line so tiny that it bends below the default route. You will need to experiment with the line’s location and compare the new audio to the old one until you get a satisfactory result.

Step4 Apply Effect

After adjusting the Dynamics Processing settings to your satisfaction, ensure that your complete waveform is chosen before clicking the OK button to apply the effect.

Your audio’s amplitude, or loudness, will reduce as a result; however, you may restore the original level by selecting “Effects” > “Amplitude and Compression” > “Normalize” from the menu bar.

Step5 Clean Up the Audio

Finally, clean up some of the frequencies the echo has produced since they are murky and irritating.

Select “Effects” followed by “Filter and EQ” and then “Parametric Equalizer” from the menu. You will get access to seven primary frequency bands to work with by default and a low-pass and high-pass band devoted to their respective functions. We need a few bands to eliminate those undesirable frequencies in the middle.

When you hear a harsh sound, start by amplifying one band (and the Q value of that band), then gently proceed across the frequency range until you reach the next band. After that, bring the band below 0 dB so that it may remove some of the roughness.

Part 2: How to Remove Echo in an Easy and Free Way?

Although a great deal of software is available to eliminate echo, the Wondershare Filmora Video Editor is the one we suggest you use. Let’s go right down to the meat of the matter. It can remove echo auditions and any other background noise.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The newly released version of Filmora includes enhanced waveforms, volume keyframing, peak metering, and audio transitions in addition to the standard audio editing tools. All of these improvements contribute to a more satisfying and high-quality audio editing experience for the user. Here are some advantages of Getting Rid of Echo and Other Background Audio Noise Using Filmora:

• You may adjust the height of the track for more accurate audio manipulation of waveforms.
• Using only one click, the Denoise function may eliminate any unwanted background noise.
• Adjusting the Denoise level to either weak, mid, or strong may provide much improved results in terms of noise reduction.

Filmora Video Editor makes it simple to eliminate background noise from an audio recording or a video recording. It can even do both simultaneously. You may separate the audio from the movie using this user-friendly video editor, then use the Audio Mixer or Audio Equalizer tools to make additional adjustments to the audio. Finally, you can Export the audio in MP3 format after editing it. The specific steps are listed down below.

Step1 Run Filmora and Import Video

Import your video into Wondershare Filmora’s timeline pane. A video preview can help you see the portions you don’t wish to keep can be edited out and removed.

Step2 Choose Detach Audio

A drop-down option will appear when you right-click the video in the timeline. Choose “Audio” from the list. Silence detection, audio modification, audio disconnect, and mute are the four choices you’ll see. If you wish to separate the audio from the video, choose “Detach Audio” from the drop-down menu.

Step3 Tick Remove Background Noise

Double-click the audio track, then choose the Edit panel and the “Remove background noise” option to remove the background noise instantly.

To access the Editing panel without first separating the audio from the video, you may alternatively double-click the video clip in the timeline. Selecting the Audio tab in the Editing panel may adjust the audio and eliminate the noise.

Step4 Fine Tune and Export

You may also make minor adjustments to the audio by utilizing the editor’s Equalizer feature to give it a more realistic tone. To enhance the overall effect, frame-by-frame adjusts the audio to match the picture. You may instantly post the video to YouTube or Vimeo after seeing the findings or click the Export option to save it to your PC with the noise reduction performed.

Part 3: Recording Tips: How to Record Without Echo?

Now that you know how to use Adobe Audition to remove echo let’s share some tips to help you record without an echo.

So, here are a few recording tips.

1. Keep things quiet. When recording audio, pay more attention to the peaceful sounds in the background. There may be humming from machines with fans, buzzing from lights, or jingling from your pet’s collar. Pay attention to where you are recording and find ways to shut down anything else.
2. Put your mobile phone in airplane mode. Phones send out signals when they receive calls or do searches in the background that the recording system can pick up. By putting your phones in “airplane mode,” you can stop them from making noises during good takes.
3. Minimize echo. Set up your recording space, so your voice stays on the walls only a little and back to your microphone. Use things that soak up the sound instead of reflecting it, like a thick rug or a comforter. You can make your voice echo in post-production if you want it to.
4. Upgrade your microphone. The hardware you use will be the most significant limit to what you can record. You can improve your recordings by plugging an external microphone into the microphone jack on your camera or with a professional microphone to record the sound separately.
5. Adjust your levels. Before you hit the record button, check to see how loud the sound you want to record is. Adjust your levels (the sensitivity of your microphone) until the sound is between -6 DBS and -12 DBS. This range allows your sound room’s source to get louder without the recorded sound getting cut off. Don’t worry because you can always increase the editing volume.
6. Start with a sound cue. If you’re recording separate audio that you’ll later sync to your video, start your recording with a short, loud sound like a clap or a high-pitched “beep.” Later, while editing, finding the part where your video and the additional audio match will be much easier.
7. Move toward the sound. Move your microphone close to the sound you want to record. The closer your microphone is to the sound source, the lower you can set your microphone’s sensitivity. If you turn down your levels, sounds you don’t want to record will also sound less loud.

Part 4: FAQs

1. How do you remove echo from recording?

Removing Echo in Audacity with Noise Gate: Choose the track you want to work on, go to the Effects menu, and look for the Noise Gate plug-in (scroll down a bit). Check to see that Gate is on Select Function. Use the preview to change the settings. When happy with the effect, click OK to apply it to the whole audio file.

2. How do you remove echo from a microphone?

Lessen the volume of your speakers to get rid of the echo. If your microphone or audio device is close to a wall or other surface that reflects sound but doesn’t absorb it, you should move the microphone away from the surface or change its direction. Additionally, you can use Wondershare Filmora or Adobe Audition echo removal technique.

Conclusion

Hence, as we saw Adobe Audition is a valuable tool for removing echo auditions from audio files. Even if you’re starting, it takes little time to improve the quality of your recordings. There are many ways to dig deeper and improve your audio quality if you are more ambitious or your recordings have many echoes.

But no matter what you do, Adobe Audition reduces echo, and you can look forward to recordings without an echo.

Free Download For macOS 10.14 or later

The newly released version of Filmora includes enhanced waveforms, volume keyframing, peak metering, and audio transitions in addition to the standard audio editing tools. All of these improvements contribute to a more satisfying and high-quality audio editing experience for the user. Here are some advantages of Getting Rid of Echo and Other Background Audio Noise Using Filmora:

• You may adjust the height of the track for more accurate audio manipulation of waveforms.
• Using only one click, the Denoise function may eliminate any unwanted background noise.
• Adjusting the Denoise level to either weak, mid, or strong may provide much improved results in terms of noise reduction.

Filmora Video Editor makes it simple to eliminate background noise from an audio recording or a video recording. It can even do both simultaneously. You may separate the audio from the movie using this user-friendly video editor, then use the Audio Mixer or Audio Equalizer tools to make additional adjustments to the audio. Finally, you can Export the audio in MP3 format after editing it. The specific steps are listed down below.

Step1 Run Filmora and Import Video

Import your video into Wondershare Filmora’s timeline pane. A video preview can help you see the portions you don’t wish to keep can be edited out and removed.

Step2 Choose Detach Audio

A drop-down option will appear when you right-click the video in the timeline. Choose “Audio” from the list. Silence detection, audio modification, audio disconnect, and mute are the four choices you’ll see. If you wish to separate the audio from the video, choose “Detach Audio” from the drop-down menu.

Step3 Tick Remove Background Noise

Double-click the audio track, then choose the Edit panel and the “Remove background noise” option to remove the background noise instantly.

To access the Editing panel without first separating the audio from the video, you may alternatively double-click the video clip in the timeline. Selecting the Audio tab in the Editing panel may adjust the audio and eliminate the noise.

Step4 Fine Tune and Export

You may also make minor adjustments to the audio by utilizing the editor’s Equalizer feature to give it a more realistic tone. To enhance the overall effect, frame-by-frame adjusts the audio to match the picture. You may instantly post the video to YouTube or Vimeo after seeing the findings or click the Export option to save it to your PC with the noise reduction performed.

Part 3: Recording Tips: How to Record Without Echo?

Now that you know how to use Adobe Audition to remove echo let’s share some tips to help you record without an echo.

So, here are a few recording tips.

1. Keep things quiet. When recording audio, pay more attention to the peaceful sounds in the background. There may be humming from machines with fans, buzzing from lights, or jingling from your pet’s collar. Pay attention to where you are recording and find ways to shut down anything else.
2. Put your mobile phone in airplane mode. Phones send out signals when they receive calls or do searches in the background that the recording system can pick up. By putting your phones in “airplane mode,” you can stop them from making noises during good takes.
3. Minimize echo. Set up your recording space, so your voice stays on the walls only a little and back to your microphone. Use things that soak up the sound instead of reflecting it, like a thick rug or a comforter. You can make your voice echo in post-production if you want it to.
4. Upgrade your microphone. The hardware you use will be the most significant limit to what you can record. You can improve your recordings by plugging an external microphone into the microphone jack on your camera or with a professional microphone to record the sound separately.
5. Adjust your levels. Before you hit the record button, check to see how loud the sound you want to record is. Adjust your levels (the sensitivity of your microphone) until the sound is between -6 DBS and -12 DBS. This range allows your sound room’s source to get louder without the recorded sound getting cut off. Don’t worry because you can always increase the editing volume.
6. Start with a sound cue. If you’re recording separate audio that you’ll later sync to your video, start your recording with a short, loud sound like a clap or a high-pitched “beep.” Later, while editing, finding the part where your video and the additional audio match will be much easier.
7. Move toward the sound. Move your microphone close to the sound you want to record. The closer your microphone is to the sound source, the lower you can set your microphone’s sensitivity. If you turn down your levels, sounds you don’t want to record will also sound less loud.

Part 4: FAQs

1. How do you remove echo from recording?

Removing Echo in Audacity with Noise Gate: Choose the track you want to work on, go to the Effects menu, and look for the Noise Gate plug-in (scroll down a bit). Check to see that Gate is on Select Function. Use the preview to change the settings. When happy with the effect, click OK to apply it to the whole audio file.

2. How do you remove echo from a microphone?

Lessen the volume of your speakers to get rid of the echo. If your microphone or audio device is close to a wall or other surface that reflects sound but doesn’t absorb it, you should move the microphone away from the surface or change its direction. Additionally, you can use Wondershare Filmora or Adobe Audition echo removal technique.

Conclusion

Hence, as we saw Adobe Audition is a valuable tool for removing echo auditions from audio files. Even if you’re starting, it takes little time to improve the quality of your recordings. There are many ways to dig deeper and improve your audio quality if you are more ambitious or your recordings have many echoes.

But no matter what you do, Adobe Audition reduces echo, and you can look forward to recordings without an echo.

How to Make a Slow Motion Video in Wondershare Filmora

How to make a video slow motion on your PC and other devices? It is easier than most people think. Slow-motion videos are cool and exciting. You could be watching a CGI fight scene or a dog making a face when trying to catch a treat. The slow-moving objects make it more exciting and intriguing. Probably it is a gender reveal party or a dramatic waterfall, and you are wondering how do I make a video slow motion. In this article, we provide you with a guide on how to make video to slow motion quickly and the easy way.

Slow Motion Video Maker Slow your video’s speed with better control of your keyframes to create unique cinematic effects!

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1. Introducing Wondershare Filmora: A Great Help for Making Slow Motion Videos

If you are looking for a solution on how to put videos in slow mo, you need to try Wondershare Filmora. The recent Filmora V13 comes with some brilliant tools that make editing videos easier and fun. The fully-equipped suite is now powered by AI allowing users to effortlessly create outstanding videos in minutes. With new features to realize your ideas and bring them to life, Filmora empowers you to work smarter and not harder.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How do you make a video slow motion with Filmora? The solution lies in the unique video editing features of the software. From manually editing the speed of the video to using slo mo effects, Filmora is a great choice. Using Filmora for creating slow motion videos has various advantages to your video editing journey:

• Precise speed control: Filmora allows you to precisely set the speed of your videos up to a single frame, giving you creative control over your slo mo effects.
• AI-powered capabilities: Powered by artificial intelligence, FIlmora gives you accurate results quickly and efficiently
• Easy to Use: Filmora is a versatile video editing software that is easy to learn and use
• High-quality output: Filmora offers a wide range of editing features, allowing you to export slo mo video without compromising the quality
• Multiple slow-motion effects: Get access to a variety of slo mo video effects, including speed ramp, time remap, optical flow, and more

Ready to add some epic slow-motion action to your videos? In the next section, we’ll guide you step-by-step through how to make a slo mo video in just a few clicks. You will be turning your ordinary footage into amazing slo-mo clips in the simplest way possible.

Part 2. How to Make a Video Slow Motion: Step-by-Step Guide

Wondershare Filmora allows users to create a video slow motion using the Speed Ramping feature. This feature is specifically designed for adjusting the speed of videos with better control of keyframes, allowing you to create unique cinematic effects. You may want your YouTube clips to look cool or slow down your video for particular reasons. Take your video editing skills to the next level with the Speed Ramping feature. Filmora makes it possible to create slow motions of high quality with smooth transitions for incredible results.

The Speed Ramping feature is effective in:

• Applying Professional Speed Effect: Quickly change the speed of your video by making it more creative.
• Speed Ramping Template Presets: Get access to Filmora’s six present speed ramping effects. They include Bullet Time, Hero Moment, Montage, Flash in, and Jumper. These effects help in creating a professional speed change effect with ease.
• Support for Customized Speed Ramping Template: Filmora allows you to create a unique speed ramping effect for your own and save it for later use.
• Maintaining the Audio Pitch: The Speed Ramping feature by Filmora allows you to maintain the original audio pitch even after changing the speed of the video.

The Speed Ramping feature is quite effective in making video slow motion with Filmora. Let’s have a look at the steps you will need to follow:

Step 1: Find the Speed Ramping Tab

Once you have launched Filmora and imported your files, double clip on the video clip or audio clip you want to create a slow motion from. Then click, Speed followed by Speed Ramping in the pop-up editing window. You may also right-click on the video clip on the timeline and choose Speed Ramping, or click on the Speed icon on the toolbar followed by Speed Ramping.

Step 2: Customize the Speed Ramps

After starting the feature, you need to customize the speed ramps to achieve the desired results. The quickest way is to select a speed ramp present from the available Hero Moment, Montage, Jumper, Bullet Time, Flash Out, and Flash In. Customizing the speed ramps will, however, give you more creative outcomes.

Strp 3: Apply the Speed Ramping

With the speed ramp ready, place the play head where you want to create a slo mo video. Then click the Add icon to add the speed keyframes. Drag the keyframe dot downward or upward as desired to control the point speed. This will give you the specific slow motion video that you want while maintaining the audio pitch. When you are satisfied with the adjustments, click OK to save the settings and export your creation.

Creating slow motion videos with the speed ramping feature can be beneficial in many ways. The slow-motion effects draw attention to specific details of the video. It could be a big reveal happening or a flashback that allows viewers to realize the clues you were giving all along. When you slow down scenes in your video, it lets people focus on specific details, gestures, or objects.

Conclusion

Creating a slow motion video can be exciting. There’s just something that makes slo mo fun and interesting to watch. How to do video slow motion you may ask. With the right software, slowing down videos is a fun and thrilling effect. To this effect, we recommend using Wondershare Filmora to create slow motions in your projects and keep your audience engaged. The Speed ramping feature of Filmors is easy to use and can be customized to achieve specific results.

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1. Introducing Wondershare Filmora: A Great Help for Making Slow Motion Videos

If you are looking for a solution on how to put videos in slow mo, you need to try Wondershare Filmora. The recent Filmora V13 comes with some brilliant tools that make editing videos easier and fun. The fully-equipped suite is now powered by AI allowing users to effortlessly create outstanding videos in minutes. With new features to realize your ideas and bring them to life, Filmora empowers you to work smarter and not harder.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How do you make a video slow motion with Filmora? The solution lies in the unique video editing features of the software. From manually editing the speed of the video to using slo mo effects, Filmora is a great choice. Using Filmora for creating slow motion videos has various advantages to your video editing journey:

• Precise speed control: Filmora allows you to precisely set the speed of your videos up to a single frame, giving you creative control over your slo mo effects.
• AI-powered capabilities: Powered by artificial intelligence, FIlmora gives you accurate results quickly and efficiently
• Easy to Use: Filmora is a versatile video editing software that is easy to learn and use
• High-quality output: Filmora offers a wide range of editing features, allowing you to export slo mo video without compromising the quality
• Multiple slow-motion effects: Get access to a variety of slo mo video effects, including speed ramp, time remap, optical flow, and more

Ready to add some epic slow-motion action to your videos? In the next section, we’ll guide you step-by-step through how to make a slo mo video in just a few clicks. You will be turning your ordinary footage into amazing slo-mo clips in the simplest way possible.

Part 2. How to Make a Video Slow Motion: Step-by-Step Guide

Wondershare Filmora allows users to create a video slow motion using the Speed Ramping feature. This feature is specifically designed for adjusting the speed of videos with better control of keyframes, allowing you to create unique cinematic effects. You may want your YouTube clips to look cool or slow down your video for particular reasons. Take your video editing skills to the next level with the Speed Ramping feature. Filmora makes it possible to create slow motions of high quality with smooth transitions for incredible results.

The Speed Ramping feature is effective in:

• Applying Professional Speed Effect: Quickly change the speed of your video by making it more creative.
• Speed Ramping Template Presets: Get access to Filmora’s six present speed ramping effects. They include Bullet Time, Hero Moment, Montage, Flash in, and Jumper. These effects help in creating a professional speed change effect with ease.
• Support for Customized Speed Ramping Template: Filmora allows you to create a unique speed ramping effect for your own and save it for later use.
• Maintaining the Audio Pitch: The Speed Ramping feature by Filmora allows you to maintain the original audio pitch even after changing the speed of the video.

The Speed Ramping feature is quite effective in making video slow motion with Filmora. Let’s have a look at the steps you will need to follow:

Step 1: Find the Speed Ramping Tab

Once you have launched Filmora and imported your files, double clip on the video clip or audio clip you want to create a slow motion from. Then click, Speed followed by Speed Ramping in the pop-up editing window. You may also right-click on the video clip on the timeline and choose Speed Ramping, or click on the Speed icon on the toolbar followed by Speed Ramping.

Step 2: Customize the Speed Ramps

After starting the feature, you need to customize the speed ramps to achieve the desired results. The quickest way is to select a speed ramp present from the available Hero Moment, Montage, Jumper, Bullet Time, Flash Out, and Flash In. Customizing the speed ramps will, however, give you more creative outcomes.

Strp 3: Apply the Speed Ramping

With the speed ramp ready, place the play head where you want to create a slo mo video. Then click the Add icon to add the speed keyframes. Drag the keyframe dot downward or upward as desired to control the point speed. This will give you the specific slow motion video that you want while maintaining the audio pitch. When you are satisfied with the adjustments, click OK to save the settings and export your creation.

Creating slow motion videos with the speed ramping feature can be beneficial in many ways. The slow-motion effects draw attention to specific details of the video. It could be a big reveal happening or a flashback that allows viewers to realize the clues you were giving all along. When you slow down scenes in your video, it lets people focus on specific details, gestures, or objects.

Conclusion

Creating a slow motion video can be exciting. There’s just something that makes slo mo fun and interesting to watch. How to do video slow motion you may ask. With the right software, slowing down videos is a fun and thrilling effect. To this effect, we recommend using Wondershare Filmora to create slow motions in your projects and keep your audience engaged. The Speed ramping feature of Filmors is easy to use and can be customized to achieve specific results.

6 Best Methods to Make a Video Longer

These days when you head on to social media, you can easily find 4-5 seconds video clips on the internet. However, many social media platforms like YouTube, Instagram, and other videos sharing platforms require you to make your video longer to meet the site’s minimum length requirements. So, for example, although Instagram’s minimum length is 3 seconds, you might want to find ways to engage your audience longer.

This article will describe the best ways to make a video longer. We’ll also offer a bonus tip on how you can edit your video to make it look better and attract more audience. On that note, let’s take a look.

6 Best Methods to Make a Video Longer

There are many methods out there to make your video longer. This section will touch on the six best methods to make a video longer.

Loop the Video

One of the best ways to make your video longer for most social media platforms is to loop the video. When you replay the video several times in a single row, it helps to multiply its length. An example is taking a 2-second video and looping it 4x. This automatically makes it into an 8-second video clip. With looping, you can simply replay the action of the clip rather than altering it in any way.

Many video editing software today allows you to loop your video for free. You have to upload the video and choose how many times you would like to loop it, and the software will get to work.

Slow Down the Video Speed

We would all agree that slow-motion makes everything seem longer automatically. You can utilize the same technique when you want to make a video longer. When you slow down a video clip, every second lasts longer. Using the slow-motion effect on a 3-second video will make the video 6 or even 9 seconds longer.

Add an Intro and Outro

Intro and outro are scenes you add before and after the video; these scenes are popular in YouTube videos. More generally, an intro is like a trailer. It shows the audience what the video is about, and the outro scene is usually used to show more information about the video maker. Adding an intro and outro to your video can add 2-4 seconds to your video clips.

It’s quite easy to add an intro and outro to any video. You can create them separately and then merge them with your video. The intro must be something relevant to the video clip; an example is adding a fast photo slideshow to the beginning of your video or a black frame. Relevant intro and outro scenes will make your video longer and maybe more engaging.

Add Images to the Video

This is another trick that most bloggers use to make their videos longer. It is an old trick in the book and makes your video significantly longer, depending on the number of videos you’re adding. A single picture can add a second or two to your video. You can simply use a video editor to merge the video clip and pictures into one seamless file.

Boomerang Your Video

If you have plans to upload your media to Instagram, then a top feature you can use to make your video longer is the boomerang feature. Instagram introduced the Boomerang feature to play short video clips forward and then repeat their reverse. So by using the Boomerang feature, you don’t only add a memory effect to your video, but you also make your video longer.

Alternatively, you can manually append your video clip to a reversed version; this option allows you to make a boomerang from an existing clip. Apart from Instagram, you can utilize many other editing tools to create a boomerang from an existing video.

Add More Content to Your Video Clip

Another step you can take is to add more materials to your video. This doesn’t necessarily mean you have to get your camera out and start shooting more scenes to add to your video. Instead, you can simply access online media libraries and get amazing materials from there that are relevant to your video clip.

Today, most professional video editors offer you access to royalty-free photos and music material. You can simply browse through their collections and pick materials relevant to your video. For example, you could add a soundtrack and videos or GIFs that make your videos engaging. Adding extra content to your video clip can make it longer by 10 seconds.

Bonus Tips: How to Edit Video Easily on a Computer

Social media platforms offer you basic video editing features that you can use to optimize your video. However, these features are limited in what they can provide you with. If you want to have more control over the editing of your video clip and make it look even more professional, you should try Wondershare Filmora. This video editing tool is powerful and provides you with more editing features to ensure you get the result you want.

Filmora offers users over 300 effects like motion elements, overlays, titles, music sounds, and many more features to make your video more engaging and attractive. Using this app is relatively easy as well, and it offers users the option of changing the file format of their video if the social media platform does not support the original format.

If you would like to edit your video to give it a more engaging and professional look, follow the simple steps below.

Step 1: Import Video to Wondershare Filmora

First, you need to download the app on your device. After that, you can download it from the official website. Luckily, Wondershare Filmora supports Windows and Mac OS. Once you download the file, install and launch the app to get started.

On the menu, click on create a new project to begin. Next, click on the import button, and from the dropdown menu, choose ‘import media file.’ Alternatively, you can simply drag the video directly to the media library of this video editor. In addition, Filmora allows you to preview your video as you add different features to optimize the video.

If your video is shaky, you can use the stabilization feature to make it more stable. Simply right-click on the video in the preview window and select the option. Once you are sure, the video is ok, drag and drop it into the timeline to start editing your video.

Step 2: Cut, Slip, Rotate, or Color-Tune Your Video

You can use many features to shape your video quickly on Wondershare Filmora. For example, you can use the scissors tool to cut or split your video. You can also use the transform tool to rotate and flip your video if you would prefer. In addition, Filmora allows you to add some advanced color tuning to your video with the color feature. This automatically makes your video even more beautiful.

Step 3: Add Filters and Effects to Your Video

Additionally, Wondershare Filmora allows you to choose different transitions, graphics, tiles, texts, sound effects, titles, filters, overlays, and elements for your videos. With this video editing tool, you can get the exact look and sound you’re looking to achieve. In addition, there are different effect tabs above the timeline that directs you to the right feature you would like to include in your video.

You can just drag these effects and drop them on the timeline to apply to your video. Filmora has over 100 in-built filters and royalty-free music you can implement on your video. If you’re not sure which feature you’re looking for. Simply experiment and undo the effect till you find exactly what you’re looking for.

Step 4: Save and Share Edited Video

Once you’re satisfied with your video clip, you can now proceed to save it. You can choose to save the video to your local folder or a storage device you’d prefer. Wondershare Filmora allows you to save in the original format or change the format to your preferred option. Filmora also allows you to change your video’s resolution and bit rate to your preference. Alternatively, you can upload your video to video-sharing platforms like Instagram, Vimeo, YouTube, etc. You can also burn the video into a DVD collection if that’s what you’re looking for.

Final Thoughts

Social media platforms are great for gaining recognition and promoting your brand. However, there are times when you don’t meet the right video length, and you would like to make your video longer. With the six methods explained above, you can make your video as long as you want and also make your video more engaging. Additionally, you can use Wondershare Filmora to make your video more professional-looking. It offers you hundreds of effects and filters you can use to optimize your video.

Meta Description: If your video is short and you need to make it longer, this article gives you six methods to make a video longer and optimize them.

One of the best ways to make your video longer for most social media platforms is to loop the video. When you replay the video several times in a single row, it helps to multiply its length. An example is taking a 2-second video and looping it 4x. This automatically makes it into an 8-second video clip. With looping, you can simply replay the action of the clip rather than altering it in any way.

Many video editing software today allows you to loop your video for free. You have to upload the video and choose how many times you would like to loop it, and the software will get to work.

Slow Down the Video Speed

We would all agree that slow-motion makes everything seem longer automatically. You can utilize the same technique when you want to make a video longer. When you slow down a video clip, every second lasts longer. Using the slow-motion effect on a 3-second video will make the video 6 or even 9 seconds longer.

Add an Intro and Outro

Intro and outro are scenes you add before and after the video; these scenes are popular in YouTube videos. More generally, an intro is like a trailer. It shows the audience what the video is about, and the outro scene is usually used to show more information about the video maker. Adding an intro and outro to your video can add 2-4 seconds to your video clips.

It’s quite easy to add an intro and outro to any video. You can create them separately and then merge them with your video. The intro must be something relevant to the video clip; an example is adding a fast photo slideshow to the beginning of your video or a black frame. Relevant intro and outro scenes will make your video longer and maybe more engaging.

Add Images to the Video

This is another trick that most bloggers use to make their videos longer. It is an old trick in the book and makes your video significantly longer, depending on the number of videos you’re adding. A single picture can add a second or two to your video. You can simply use a video editor to merge the video clip and pictures into one seamless file.

Boomerang Your Video

If you have plans to upload your media to Instagram, then a top feature you can use to make your video longer is the boomerang feature. Instagram introduced the Boomerang feature to play short video clips forward and then repeat their reverse. So by using the Boomerang feature, you don’t only add a memory effect to your video, but you also make your video longer.

Alternatively, you can manually append your video clip to a reversed version; this option allows you to make a boomerang from an existing clip. Apart from Instagram, you can utilize many other editing tools to create a boomerang from an existing video.

Add More Content to Your Video Clip

Another step you can take is to add more materials to your video. This doesn’t necessarily mean you have to get your camera out and start shooting more scenes to add to your video. Instead, you can simply access online media libraries and get amazing materials from there that are relevant to your video clip.

Today, most professional video editors offer you access to royalty-free photos and music material. You can simply browse through their collections and pick materials relevant to your video. For example, you could add a soundtrack and videos or GIFs that make your videos engaging. Adding extra content to your video clip can make it longer by 10 seconds.

Bonus Tips: How to Edit Video Easily on a Computer

Social media platforms offer you basic video editing features that you can use to optimize your video. However, these features are limited in what they can provide you with. If you want to have more control over the editing of your video clip and make it look even more professional, you should try Wondershare Filmora. This video editing tool is powerful and provides you with more editing features to ensure you get the result you want.

Filmora offers users over 300 effects like motion elements, overlays, titles, music sounds, and many more features to make your video more engaging and attractive. Using this app is relatively easy as well, and it offers users the option of changing the file format of their video if the social media platform does not support the original format.

If you would like to edit your video to give it a more engaging and professional look, follow the simple steps below.

Step 1: Import Video to Wondershare Filmora

First, you need to download the app on your device. After that, you can download it from the official website. Luckily, Wondershare Filmora supports Windows and Mac OS. Once you download the file, install and launch the app to get started.

On the menu, click on create a new project to begin. Next, click on the import button, and from the dropdown menu, choose ‘import media file.’ Alternatively, you can simply drag the video directly to the media library of this video editor. In addition, Filmora allows you to preview your video as you add different features to optimize the video.

If your video is shaky, you can use the stabilization feature to make it more stable. Simply right-click on the video in the preview window and select the option. Once you are sure, the video is ok, drag and drop it into the timeline to start editing your video.

Step 2: Cut, Slip, Rotate, or Color-Tune Your Video

You can use many features to shape your video quickly on Wondershare Filmora. For example, you can use the scissors tool to cut or split your video. You can also use the transform tool to rotate and flip your video if you would prefer. In addition, Filmora allows you to add some advanced color tuning to your video with the color feature. This automatically makes your video even more beautiful.

Step 3: Add Filters and Effects to Your Video

Additionally, Wondershare Filmora allows you to choose different transitions, graphics, tiles, texts, sound effects, titles, filters, overlays, and elements for your videos. With this video editing tool, you can get the exact look and sound you’re looking to achieve. In addition, there are different effect tabs above the timeline that directs you to the right feature you would like to include in your video.

You can just drag these effects and drop them on the timeline to apply to your video. Filmora has over 100 in-built filters and royalty-free music you can implement on your video. If you’re not sure which feature you’re looking for. Simply experiment and undo the effect till you find exactly what you’re looking for.

Step 4: Save and Share Edited Video

Once you’re satisfied with your video clip, you can now proceed to save it. You can choose to save the video to your local folder or a storage device you’d prefer. Wondershare Filmora allows you to save in the original format or change the format to your preferred option. Filmora also allows you to change your video’s resolution and bit rate to your preference. Alternatively, you can upload your video to video-sharing platforms like Instagram, Vimeo, YouTube, etc. You can also burn the video into a DVD collection if that’s what you’re looking for.

Final Thoughts

Social media platforms are great for gaining recognition and promoting your brand. However, there are times when you don’t meet the right video length, and you would like to make your video longer. With the six methods explained above, you can make your video as long as you want and also make your video more engaging. Additionally, you can use Wondershare Filmora to make your video more professional-looking. It offers you hundreds of effects and filters you can use to optimize your video.

Meta Description: If your video is short and you need to make it longer, this article gives you six methods to make a video longer and optimize them.

One of the best ways to make your video longer for most social media platforms is to loop the video. When you replay the video several times in a single row, it helps to multiply its length. An example is taking a 2-second video and looping it 4x. This automatically makes it into an 8-second video clip. With looping, you can simply replay the action of the clip rather than altering it in any way.

Many video editing software today allows you to loop your video for free. You have to upload the video and choose how many times you would like to loop it, and the software will get to work.

Slow Down the Video Speed

We would all agree that slow-motion makes everything seem longer automatically. You can utilize the same technique when you want to make a video longer. When you slow down a video clip, every second lasts longer. Using the slow-motion effect on a 3-second video will make the video 6 or even 9 seconds longer.

Add an Intro and Outro

Intro and outro are scenes you add before and after the video; these scenes are popular in YouTube videos. More generally, an intro is like a trailer. It shows the audience what the video is about, and the outro scene is usually used to show more information about the video maker. Adding an intro and outro to your video can add 2-4 seconds to your video clips.

It’s quite easy to add an intro and outro to any video. You can create them separately and then merge them with your video. The intro must be something relevant to the video clip; an example is adding a fast photo slideshow to the beginning of your video or a black frame. Relevant intro and outro scenes will make your video longer and maybe more engaging.

Add Images to the Video

This is another trick that most bloggers use to make their videos longer. It is an old trick in the book and makes your video significantly longer, depending on the number of videos you’re adding. A single picture can add a second or two to your video. You can simply use a video editor to merge the video clip and pictures into one seamless file.

Boomerang Your Video

If you have plans to upload your media to Instagram, then a top feature you can use to make your video longer is the boomerang feature. Instagram introduced the Boomerang feature to play short video clips forward and then repeat their reverse. So by using the Boomerang feature, you don’t only add a memory effect to your video, but you also make your video longer.

Alternatively, you can manually append your video clip to a reversed version; this option allows you to make a boomerang from an existing clip. Apart from Instagram, you can utilize many other editing tools to create a boomerang from an existing video.

Add More Content to Your Video Clip

Another step you can take is to add more materials to your video. This doesn’t necessarily mean you have to get your camera out and start shooting more scenes to add to your video. Instead, you can simply access online media libraries and get amazing materials from there that are relevant to your video clip.

Today, most professional video editors offer you access to royalty-free photos and music material. You can simply browse through their collections and pick materials relevant to your video. For example, you could add a soundtrack and videos or GIFs that make your videos engaging. Adding extra content to your video clip can make it longer by 10 seconds.

Bonus Tips: How to Edit Video Easily on a Computer

Social media platforms offer you basic video editing features that you can use to optimize your video. However, these features are limited in what they can provide you with. If you want to have more control over the editing of your video clip and make it look even more professional, you should try Wondershare Filmora. This video editing tool is powerful and provides you with more editing features to ensure you get the result you want.

Filmora offers users over 300 effects like motion elements, overlays, titles, music sounds, and many more features to make your video more engaging and attractive. Using this app is relatively easy as well, and it offers users the option of changing the file format of their video if the social media platform does not support the original format.

If you would like to edit your video to give it a more engaging and professional look, follow the simple steps below.

Step 1: Import Video to Wondershare Filmora

First, you need to download the app on your device. After that, you can download it from the official website. Luckily, Wondershare Filmora supports Windows and Mac OS. Once you download the file, install and launch the app to get started.

On the menu, click on create a new project to begin. Next, click on the import button, and from the dropdown menu, choose ‘import media file.’ Alternatively, you can simply drag the video directly to the media library of this video editor. In addition, Filmora allows you to preview your video as you add different features to optimize the video.

If your video is shaky, you can use the stabilization feature to make it more stable. Simply right-click on the video in the preview window and select the option. Once you are sure, the video is ok, drag and drop it into the timeline to start editing your video.

Step 2: Cut, Slip, Rotate, or Color-Tune Your Video

You can use many features to shape your video quickly on Wondershare Filmora. For example, you can use the scissors tool to cut or split your video. You can also use the transform tool to rotate and flip your video if you would prefer. In addition, Filmora allows you to add some advanced color tuning to your video with the color feature. This automatically makes your video even more beautiful.

Step 3: Add Filters and Effects to Your Video

Additionally, Wondershare Filmora allows you to choose different transitions, graphics, tiles, texts, sound effects, titles, filters, overlays, and elements for your videos. With this video editing tool, you can get the exact look and sound you’re looking to achieve. In addition, there are different effect tabs above the timeline that directs you to the right feature you would like to include in your video.

You can just drag these effects and drop them on the timeline to apply to your video. Filmora has over 100 in-built filters and royalty-free music you can implement on your video. If you’re not sure which feature you’re looking for. Simply experiment and undo the effect till you find exactly what you’re looking for.

Step 4: Save and Share Edited Video

Once you’re satisfied with your video clip, you can now proceed to save it. You can choose to save the video to your local folder or a storage device you’d prefer. Wondershare Filmora allows you to save in the original format or change the format to your preferred option. Filmora also allows you to change your video’s resolution and bit rate to your preference. Alternatively, you can upload your video to video-sharing platforms like Instagram, Vimeo, YouTube, etc. You can also burn the video into a DVD collection if that’s what you’re looking for.

Final Thoughts

Social media platforms are great for gaining recognition and promoting your brand. However, there are times when you don’t meet the right video length, and you would like to make your video longer. With the six methods explained above, you can make your video as long as you want and also make your video more engaging. Additionally, you can use Wondershare Filmora to make your video more professional-looking. It offers you hundreds of effects and filters you can use to optimize your video.

Meta Description: If your video is short and you need to make it longer, this article gives you six methods to make a video longer and optimize them.

One of the best ways to make your video longer for most social media platforms is to loop the video. When you replay the video several times in a single row, it helps to multiply its length. An example is taking a 2-second video and looping it 4x. This automatically makes it into an 8-second video clip. With looping, you can simply replay the action of the clip rather than altering it in any way.

Many video editing software today allows you to loop your video for free. You have to upload the video and choose how many times you would like to loop it, and the software will get to work.

Slow Down the Video Speed

We would all agree that slow-motion makes everything seem longer automatically. You can utilize the same technique when you want to make a video longer. When you slow down a video clip, every second lasts longer. Using the slow-motion effect on a 3-second video will make the video 6 or even 9 seconds longer.

Add an Intro and Outro

Intro and outro are scenes you add before and after the video; these scenes are popular in YouTube videos. More generally, an intro is like a trailer. It shows the audience what the video is about, and the outro scene is usually used to show more information about the video maker. Adding an intro and outro to your video can add 2-4 seconds to your video clips.

It’s quite easy to add an intro and outro to any video. You can create them separately and then merge them with your video. The intro must be something relevant to the video clip; an example is adding a fast photo slideshow to the beginning of your video or a black frame. Relevant intro and outro scenes will make your video longer and maybe more engaging.

Add Images to the Video

This is another trick that most bloggers use to make their videos longer. It is an old trick in the book and makes your video significantly longer, depending on the number of videos you’re adding. A single picture can add a second or two to your video. You can simply use a video editor to merge the video clip and pictures into one seamless file.

Boomerang Your Video

If you have plans to upload your media to Instagram, then a top feature you can use to make your video longer is the boomerang feature. Instagram introduced the Boomerang feature to play short video clips forward and then repeat their reverse. So by using the Boomerang feature, you don’t only add a memory effect to your video, but you also make your video longer.

Alternatively, you can manually append your video clip to a reversed version; this option allows you to make a boomerang from an existing clip. Apart from Instagram, you can utilize many other editing tools to create a boomerang from an existing video.

Add More Content to Your Video Clip

Another step you can take is to add more materials to your video. This doesn’t necessarily mean you have to get your camera out and start shooting more scenes to add to your video. Instead, you can simply access online media libraries and get amazing materials from there that are relevant to your video clip.

Today, most professional video editors offer you access to royalty-free photos and music material. You can simply browse through their collections and pick materials relevant to your video. For example, you could add a soundtrack and videos or GIFs that make your videos engaging. Adding extra content to your video clip can make it longer by 10 seconds.

Bonus Tips: How to Edit Video Easily on a Computer

Social media platforms offer you basic video editing features that you can use to optimize your video. However, these features are limited in what they can provide you with. If you want to have more control over the editing of your video clip and make it look even more professional, you should try Wondershare Filmora. This video editing tool is powerful and provides you with more editing features to ensure you get the result you want.

Filmora offers users over 300 effects like motion elements, overlays, titles, music sounds, and many more features to make your video more engaging and attractive. Using this app is relatively easy as well, and it offers users the option of changing the file format of their video if the social media platform does not support the original format.

If you would like to edit your video to give it a more engaging and professional look, follow the simple steps below.

Step 1: Import Video to Wondershare Filmora

First, you need to download the app on your device. After that, you can download it from the official website. Luckily, Wondershare Filmora supports Windows and Mac OS. Once you download the file, install and launch the app to get started.

On the menu, click on create a new project to begin. Next, click on the import button, and from the dropdown menu, choose ‘import media file.’ Alternatively, you can simply drag the video directly to the media library of this video editor. In addition, Filmora allows you to preview your video as you add different features to optimize the video.

If your video is shaky, you can use the stabilization feature to make it more stable. Simply right-click on the video in the preview window and select the option. Once you are sure, the video is ok, drag and drop it into the timeline to start editing your video.

Step 2: Cut, Slip, Rotate, or Color-Tune Your Video

You can use many features to shape your video quickly on Wondershare Filmora. For example, you can use the scissors tool to cut or split your video. You can also use the transform tool to rotate and flip your video if you would prefer. In addition, Filmora allows you to add some advanced color tuning to your video with the color feature. This automatically makes your video even more beautiful.

Step 3: Add Filters and Effects to Your Video

Additionally, Wondershare Filmora allows you to choose different transitions, graphics, tiles, texts, sound effects, titles, filters, overlays, and elements for your videos. With this video editing tool, you can get the exact look and sound you’re looking to achieve. In addition, there are different effect tabs above the timeline that directs you to the right feature you would like to include in your video.

You can just drag these effects and drop them on the timeline to apply to your video. Filmora has over 100 in-built filters and royalty-free music you can implement on your video. If you’re not sure which feature you’re looking for. Simply experiment and undo the effect till you find exactly what you’re looking for.

Step 4: Save and Share Edited Video

Once you’re satisfied with your video clip, you can now proceed to save it. You can choose to save the video to your local folder or a storage device you’d prefer. Wondershare Filmora allows you to save in the original format or change the format to your preferred option. Filmora also allows you to change your video’s resolution and bit rate to your preference. Alternatively, you can upload your video to video-sharing platforms like Instagram, Vimeo, YouTube, etc. You can also burn the video into a DVD collection if that’s what you’re looking for.

Final Thoughts

Social media platforms are great for gaining recognition and promoting your brand. However, there are times when you don’t meet the right video length, and you would like to make your video longer. With the six methods explained above, you can make your video as long as you want and also make your video more engaging. Additionally, you can use Wondershare Filmora to make your video more professional-looking. It offers you hundreds of effects and filters you can use to optimize your video.

Meta Description: If your video is short and you need to make it longer, this article gives you six methods to make a video longer and optimize them.

Also read: