Denoise Video in Adobe Premiere Pro – Audio and Video Noise Removal

What’s the key to our success? And what’s the process that it takes us? How can we attract audiences and guarantee the viewers’ transition to loyalty? – these are the questions that people in the professions connected to the technology should ask. There is no recipe, but at least, we know what NOT to do – DO NOT create bad content! You will never have a desired amount of listeners for your podcasts if the voice of the actor or noise of the whole track is annoying, you will struggle to have success on Youtube if your shots are unpleasant to watch, and the list goes on – there are just too many things you should not do!

But sometimes bad quality just happens. It happens when you know you have a problem and it happens when you think everything is going well in producing. You might come back from the production and find out that every shot you took had bad lightning, or there was an almost naked guy running on the background, or there is a noise on the background that just makes the whole experience of watching and listening not worthwhile! This might be something that sinks your heart…

But the mistakes we make don’t ensure that there has been a verdict cast for our failure. Nowadays, the will is everything – if you are really willing to make something work, you will just have to find the right tools, and learn a little about them, and, Voila! – Maybe you can turn bad into something good? Unacceptable into something acceptable? Annoying into interesting, and unpleasant into enjoyable?

This is called EDITING. And Editing covers different, almost endless days – too many computer programs, too many tools, too many opportunities to modify almost anything you want to make look and sound better - All of this feels like magic!

Among many instruments and techniques, there is one thing called denoising, with two different meaning. You might find noise in two areas – video and audio. Audio denoising means to remove or reduce the background noise, such as air conditioner hum, someone screaming from far away, birds chirping, the waves, etc. the noise in photo and video terms means that the scene we are looking at is grainy and makes watching the scene a little more difficult, with a less clear picture. And whenever these kind of things appear, mostly out of the blue, – because no one wants to take a bad video or record a bad voice-over, - our magical tools and abilities come to play…

One of those is called Adobe Premiere Pro, using for video editing, viewed as the most sophisticated video editor software. So, in this article, we will learn how to handle bot noise-s – in video as well as audio terms, and how to create a better viewer/listener experience in this very program. Lastly, we’ll touch upon an alternative for background noise removal, so, there’s nothing left but tuning in!

Video denoising in Adobe Premiere Pro

Reducing the noise in the video in this software can be achieved through using effect which is called Median. Before discovering it, without any doubt, we need to add our footage into the Timeline in Premiere Pro. Then, we can proceed to finding the Effects Panel, where our wanted Median can be found – just drag and drop the effect to your clip.

In order to make sure that the Median touches the grainiest parts of the whole clip, we need to use something called masks. In the Effects Control panel, we can select the mask shape for our clip –either choose rectangle, circle, or pen tool. Pen tool is something with which we move the Mask around the screen and resize it to include the desired area and cover it.

Changing Feather setting to 100 will make sure that the effect loses a visible edge and there is some smoothness added to those edges.

There might be the need to repeat this process and create several masks, if that means to have covered all of the grainy area of the scene.

Lastly, tom reduce the noise, adjusting the effect settings is needed.

Technically, what the Median effect does is just blurring the graininess, not exactly “taking it away”. And if we play with the Radius settings there, we can find our desired look!

How to remove background noise in Adobe Premiere Pro

Removing background noise in Adobe Premiere Pro can be a pretty simple process and lead to much better results. First of all, of course, import the desired material into your software so you can see the video and audio in the sequence visually. After having the project set up, you will need to find the Efffects Panel, which might be hidden a little, but it must be on the left and bottom of the program layout; or, you can find it on the top, in the navbar.

After having located the Effects panel, go for the search bar and type: denoise, and you’ll see that DeNoise effect is under Audio Effects.

You hold onto the effect, drag and drop it on the audio track in the timeline itself! Then, you just click on the audio in the sequence and on the top right Effect Controls will appear, which we need to concentrate on. You will scroll down a little there and below Audio notice: fx DeNoise, where you hit on the Edit button. This will open the Clip Fx Editor for the Audio denoising.

Basically, it only has one, Amount scale, and if you drag the slider of it to the right at 100%, it will remove the whole noise, but setting it on 0% will not remove any noise at all. So, you need to choose your preferred percentage! Just listen what is acceptable for you, but the general suggestion here would be that you can choose as high percent as you want, but if the effect starts taking out the voice and actually wanted parts, then you will have to stop and keep it that way. So, that’s actually it!

Bonus tip: how to remove audio noise in video with Wondershare Filmora

What we have promised in the beginning in the video, we like to offer now – the alternative to reduce or remove audio noise in the video is called Wondershare Filmora, which functions in a very simple way. So, we can start using these guides:

Drag and drop your video into the timeline. Right-clicking on the video and hitting Detach Audio will enable us to separate audio and video from one another, getting us a chance to work on them individually.

Double-click on the audio track shows the editing panel, where we see Remove background noise – choosing this option removes the noise!

Though, there is another way to do this too. If you don’t want to detach the audio, then first, double-click on the video clip in the timeline and when the editing panel opens, switch to Audio. If you check the box next to Remove background noise, you will see that there are three levels – weak, mid, and strong, which determine the strength of how toe noise is going to be reduced. Choosing one of them is up to you!

In case you find that the voice sounds a little robotics, you’ll need to make it sound more natural, of course. For it, you will need to click Customize, which will take you into the Customize Equalizer department.

The low tunes are on the left, while the highs are on the right. Background noises are often the low ones, so we better lower them even more, but we would raise the middle ones to achieve a natural sound.

And, that’s it – you are done with audio background noise removal!

So, in this article, we learned how to remove the video noise and grain and audio background noise using the software Adobe Premire Pro, while we also discussed how to do the latter using Wondershare Filmora – hope you can start using your new knowledge and tools very soon and create the content you never thought you could have created!

In order to make sure that the Median touches the grainiest parts of the whole clip, we need to use something called masks. In the Effects Control panel, we can select the mask shape for our clip –either choose rectangle, circle, or pen tool. Pen tool is something with which we move the Mask around the screen and resize it to include the desired area and cover it.

Changing Feather setting to 100 will make sure that the effect loses a visible edge and there is some smoothness added to those edges.

There might be the need to repeat this process and create several masks, if that means to have covered all of the grainy area of the scene.

Lastly, tom reduce the noise, adjusting the effect settings is needed.

Technically, what the Median effect does is just blurring the graininess, not exactly “taking it away”. And if we play with the Radius settings there, we can find our desired look!

How to remove background noise in Adobe Premiere Pro

Removing background noise in Adobe Premiere Pro can be a pretty simple process and lead to much better results. First of all, of course, import the desired material into your software so you can see the video and audio in the sequence visually. After having the project set up, you will need to find the Efffects Panel, which might be hidden a little, but it must be on the left and bottom of the program layout; or, you can find it on the top, in the navbar.

After having located the Effects panel, go for the search bar and type: denoise, and you’ll see that DeNoise effect is under Audio Effects.

You hold onto the effect, drag and drop it on the audio track in the timeline itself! Then, you just click on the audio in the sequence and on the top right Effect Controls will appear, which we need to concentrate on. You will scroll down a little there and below Audio notice: fx DeNoise, where you hit on the Edit button. This will open the Clip Fx Editor for the Audio denoising.

Basically, it only has one, Amount scale, and if you drag the slider of it to the right at 100%, it will remove the whole noise, but setting it on 0% will not remove any noise at all. So, you need to choose your preferred percentage! Just listen what is acceptable for you, but the general suggestion here would be that you can choose as high percent as you want, but if the effect starts taking out the voice and actually wanted parts, then you will have to stop and keep it that way. So, that’s actually it!

Bonus tip: how to remove audio noise in video with Wondershare Filmora

What we have promised in the beginning in the video, we like to offer now – the alternative to reduce or remove audio noise in the video is called Wondershare Filmora, which functions in a very simple way. So, we can start using these guides:

Drag and drop your video into the timeline. Right-clicking on the video and hitting Detach Audio will enable us to separate audio and video from one another, getting us a chance to work on them individually.

Double-click on the audio track shows the editing panel, where we see Remove background noise – choosing this option removes the noise!

Though, there is another way to do this too. If you don’t want to detach the audio, then first, double-click on the video clip in the timeline and when the editing panel opens, switch to Audio. If you check the box next to Remove background noise, you will see that there are three levels – weak, mid, and strong, which determine the strength of how toe noise is going to be reduced. Choosing one of them is up to you!

In case you find that the voice sounds a little robotics, you’ll need to make it sound more natural, of course. For it, you will need to click Customize, which will take you into the Customize Equalizer department.

The low tunes are on the left, while the highs are on the right. Background noises are often the low ones, so we better lower them even more, but we would raise the middle ones to achieve a natural sound.

And, that’s it – you are done with audio background noise removal!

So, in this article, we learned how to remove the video noise and grain and audio background noise using the software Adobe Premire Pro, while we also discussed how to do the latter using Wondershare Filmora – hope you can start using your new knowledge and tools very soon and create the content you never thought you could have created!

In order to make sure that the Median touches the grainiest parts of the whole clip, we need to use something called masks. In the Effects Control panel, we can select the mask shape for our clip –either choose rectangle, circle, or pen tool. Pen tool is something with which we move the Mask around the screen and resize it to include the desired area and cover it.

Changing Feather setting to 100 will make sure that the effect loses a visible edge and there is some smoothness added to those edges.

There might be the need to repeat this process and create several masks, if that means to have covered all of the grainy area of the scene.

Lastly, tom reduce the noise, adjusting the effect settings is needed.

Technically, what the Median effect does is just blurring the graininess, not exactly “taking it away”. And if we play with the Radius settings there, we can find our desired look!

How to remove background noise in Adobe Premiere Pro

Removing background noise in Adobe Premiere Pro can be a pretty simple process and lead to much better results. First of all, of course, import the desired material into your software so you can see the video and audio in the sequence visually. After having the project set up, you will need to find the Efffects Panel, which might be hidden a little, but it must be on the left and bottom of the program layout; or, you can find it on the top, in the navbar.

After having located the Effects panel, go for the search bar and type: denoise, and you’ll see that DeNoise effect is under Audio Effects.

You hold onto the effect, drag and drop it on the audio track in the timeline itself! Then, you just click on the audio in the sequence and on the top right Effect Controls will appear, which we need to concentrate on. You will scroll down a little there and below Audio notice: fx DeNoise, where you hit on the Edit button. This will open the Clip Fx Editor for the Audio denoising.

Basically, it only has one, Amount scale, and if you drag the slider of it to the right at 100%, it will remove the whole noise, but setting it on 0% will not remove any noise at all. So, you need to choose your preferred percentage! Just listen what is acceptable for you, but the general suggestion here would be that you can choose as high percent as you want, but if the effect starts taking out the voice and actually wanted parts, then you will have to stop and keep it that way. So, that’s actually it!

Bonus tip: how to remove audio noise in video with Wondershare Filmora

What we have promised in the beginning in the video, we like to offer now – the alternative to reduce or remove audio noise in the video is called Wondershare Filmora, which functions in a very simple way. So, we can start using these guides:

Drag and drop your video into the timeline. Right-clicking on the video and hitting Detach Audio will enable us to separate audio and video from one another, getting us a chance to work on them individually.

Double-click on the audio track shows the editing panel, where we see Remove background noise – choosing this option removes the noise!

Though, there is another way to do this too. If you don’t want to detach the audio, then first, double-click on the video clip in the timeline and when the editing panel opens, switch to Audio. If you check the box next to Remove background noise, you will see that there are three levels – weak, mid, and strong, which determine the strength of how toe noise is going to be reduced. Choosing one of them is up to you!

In case you find that the voice sounds a little robotics, you’ll need to make it sound more natural, of course. For it, you will need to click Customize, which will take you into the Customize Equalizer department.

The low tunes are on the left, while the highs are on the right. Background noises are often the low ones, so we better lower them even more, but we would raise the middle ones to achieve a natural sound.

And, that’s it – you are done with audio background noise removal!

So, in this article, we learned how to remove the video noise and grain and audio background noise using the software Adobe Premire Pro, while we also discussed how to do the latter using Wondershare Filmora – hope you can start using your new knowledge and tools very soon and create the content you never thought you could have created!

In order to make sure that the Median touches the grainiest parts of the whole clip, we need to use something called masks. In the Effects Control panel, we can select the mask shape for our clip –either choose rectangle, circle, or pen tool. Pen tool is something with which we move the Mask around the screen and resize it to include the desired area and cover it.

Changing Feather setting to 100 will make sure that the effect loses a visible edge and there is some smoothness added to those edges.

There might be the need to repeat this process and create several masks, if that means to have covered all of the grainy area of the scene.

Lastly, tom reduce the noise, adjusting the effect settings is needed.

Technically, what the Median effect does is just blurring the graininess, not exactly “taking it away”. And if we play with the Radius settings there, we can find our desired look!

How to remove background noise in Adobe Premiere Pro

Removing background noise in Adobe Premiere Pro can be a pretty simple process and lead to much better results. First of all, of course, import the desired material into your software so you can see the video and audio in the sequence visually. After having the project set up, you will need to find the Efffects Panel, which might be hidden a little, but it must be on the left and bottom of the program layout; or, you can find it on the top, in the navbar.

After having located the Effects panel, go for the search bar and type: denoise, and you’ll see that DeNoise effect is under Audio Effects.

You hold onto the effect, drag and drop it on the audio track in the timeline itself! Then, you just click on the audio in the sequence and on the top right Effect Controls will appear, which we need to concentrate on. You will scroll down a little there and below Audio notice: fx DeNoise, where you hit on the Edit button. This will open the Clip Fx Editor for the Audio denoising.

Basically, it only has one, Amount scale, and if you drag the slider of it to the right at 100%, it will remove the whole noise, but setting it on 0% will not remove any noise at all. So, you need to choose your preferred percentage! Just listen what is acceptable for you, but the general suggestion here would be that you can choose as high percent as you want, but if the effect starts taking out the voice and actually wanted parts, then you will have to stop and keep it that way. So, that’s actually it!

Bonus tip: how to remove audio noise in video with Wondershare Filmora

What we have promised in the beginning in the video, we like to offer now – the alternative to reduce or remove audio noise in the video is called Wondershare Filmora, which functions in a very simple way. So, we can start using these guides:

Drag and drop your video into the timeline. Right-clicking on the video and hitting Detach Audio will enable us to separate audio and video from one another, getting us a chance to work on them individually.

Double-click on the audio track shows the editing panel, where we see Remove background noise – choosing this option removes the noise!

Though, there is another way to do this too. If you don’t want to detach the audio, then first, double-click on the video clip in the timeline and when the editing panel opens, switch to Audio. If you check the box next to Remove background noise, you will see that there are three levels – weak, mid, and strong, which determine the strength of how toe noise is going to be reduced. Choosing one of them is up to you!

In case you find that the voice sounds a little robotics, you’ll need to make it sound more natural, of course. For it, you will need to click Customize, which will take you into the Customize Equalizer department.

The low tunes are on the left, while the highs are on the right. Background noises are often the low ones, so we better lower them even more, but we would raise the middle ones to achieve a natural sound.

And, that’s it – you are done with audio background noise removal!

So, in this article, we learned how to remove the video noise and grain and audio background noise using the software Adobe Premire Pro, while we also discussed how to do the latter using Wondershare Filmora – hope you can start using your new knowledge and tools very soon and create the content you never thought you could have created!

How To Split Videos in Premier Pro

You might regularly split and cut clips while doing video editing to find the perfect tempo for your video or removes portions of recordings you might not want. When you first begin using Adobe Premiere for video editing, it is highly possible that you will feel overwhelmed by the number of options at your disposal and question how to divide your footage quickly.

Premiere Pro is the most popular video editing program for movies, television, and online. You may edit the footage into polished films and videos with the aid of creative tools and interaction with other apps and services.

Part 1. How to split a clip in premiere pro?

1. The Razor tool

The Razor tool in Premiere is the simplest way to split or cut clips. This enables you to separate clips from the project timeline during your chosen clip. This technique is useful for making the first rough cut of your clips, with the sole drawback being that it can be less exact.

You can use the following steps to split a clip using the Razor tool:

Step1By pressing Cmd+I or Ctrl+I or by choosing File > Import, you can import it into Premiere Pro.

Step2Drag the clip onto the timeline if there is an existing sequence. If not, use the right-click menu to choose New Sequence From Clip. The video will now appear as a single block.

Step3Choose the Razor tool from the panel next to the timeline to split the clip.

Step4To split a video clip, click on the section you want to split.

Step5Now that you have two segments from the same video file, you can edit them separately.

2. Current-Time Indicator

A blue triangular indication called the Current Time Indicator (CTI) lets you know where you are in the timeline. CTIs are employed in a variety of panels.

You can follow these steps to split the clip using Current-Time Indicator:

Step1Select the section of the clip you want to split by moving the Current-Time Indicator there.

Step2Ensure that the video layer you want to split is highlighted on the timeline’s left side.

Step3Use the keyboard shortcuts Cmd+K or Ctrl+K to split the clip.

3. Source Panel

Individual clips are played back on the Source Monitor. You prepare clips for a sequence in the Source Monitor. You designate the clip’s source tracks, In points, and Out points. In a Timeline panel, you may add clips to a sequence and place clip markers.

How to split video clips with source panel in premiere pro :

For the clip, you want to split to appear in the Source panel, choose it from the Project panel. Then take these actions.

Step1First, locate the arrow-shaped marker at the start of the clip’s time bar in the Source Panel to navigate and indicate the In and Out points.

Step2Wherever you want the In and Out indicators to appear, press the I or O key. I stand for inside, and O for outside.

Step3Select Insert from the Source panel’s tools once your marks are in place.

Part 2. How to split audio from video in premiere pro?

1. The Razor tool

You can use the following steps to split an audio clip using the Razor tool:

Step1You can import it into Premiere Pro by selecting File > Import, or pressing Ctrl+I or Cmd+I.

Step2If there is an existing sequence, drag the clip onto it. If not, select New Sequence From Clip from the right-click menu. Now the video will play in a block format.

Step3Choose the moment at which you want to separate. To trim the movie, choose the “Razor” tool from the Tools area. Utilizing this tool, navigate to the timeline for the video or audio, left click on the video, and it will divide the file into two pieces.

Step4You can edit each part separately now that you have two from the same audio file.

2. Current-Time Indicator

You can follow these steps to split the audio clip using Current-Time Indicator:

Step1By dragging the Current-Time Indicator there, you can choose the part of the audio clip you want to separate.

Step2On the timeline’s left side, make sure the audio layer you want to split is highlighted.

Step3Use the keyboard commands Cmd+K or Ctrl+K to divide the audio clip.

Note: The methods to split a video/audio are the same. Splitting a video clip using this method will automatically be split if the audio has been highlighted.

Part 3. How to split video and audio in alternative to premiere pro?

As a professional video editing software, Premiere Pro offers a wide range of professional editing features. But, for a beginner, it might seem time-consuming to master the software. Because it requires a high-speed PC due to the video resolution and requirements. So, we suggest Wondershare Filmora because it is considerably easier to use. Products on Filmora are available for various users, from novice to expert. A timeline, preview window, and effects library are common features. These may be accessed and managed using a drag-and-drop interface.

You can follow these steps to split audio and video without any hassle:

Step1To add video files to the Timeline for trimming, first click “Import“ on the main windows and choose the video files you want from your computer. You can also just drag and drop movies into the Media Library.

Step2To eliminate an undesirable segment, move the playhead over it and select the scissor icon.

Step3”Detach Audio” from the context menu when you are ready to extract the audio track from a video file. You’ll see that an audio file immediately appears on the audio track.

Step4Click “Export“ after you’re done trimming, then choose where you want to save the edited video.

Conclusion

Since we run out of time because of our busy schedules, you might find it inconvenient to use two different software programs when it can be done using Filmora. Due to the highly advanced and user-friendly tools introduced in Filmora , it is one of the best and most highly recommended video editing software.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 3. How to split video and audio in alternative to premiere pro?

As a professional video editing software, Premiere Pro offers a wide range of professional editing features. But, for a beginner, it might seem time-consuming to master the software. Because it requires a high-speed PC due to the video resolution and requirements. So, we suggest Wondershare Filmora because it is considerably easier to use. Products on Filmora are available for various users, from novice to expert. A timeline, preview window, and effects library are common features. These may be accessed and managed using a drag-and-drop interface.

You can follow these steps to split audio and video without any hassle:

Step1To add video files to the Timeline for trimming, first click “Import“ on the main windows and choose the video files you want from your computer. You can also just drag and drop movies into the Media Library.

Step2To eliminate an undesirable segment, move the playhead over it and select the scissor icon.

Step3”Detach Audio” from the context menu when you are ready to extract the audio track from a video file. You’ll see that an audio file immediately appears on the audio track.

Step4Click “Export“ after you’re done trimming, then choose where you want to save the edited video.

Conclusion

Since we run out of time because of our busy schedules, you might find it inconvenient to use two different software programs when it can be done using Filmora. Due to the highly advanced and user-friendly tools introduced in Filmora , it is one of the best and most highly recommended video editing software.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Comment on YouTube Live Chat

YouTube continues to grow in popularity. On this platform, users of YouTube can view and upload videos as well as debate them live. Live chat on YouTube is described in this article.

Let’s start off!

1. What is YouTube live chat?

Every day, more than 30 million individuals use YouTube to upload and watch entertaining videos. Many individuals are interested in having a conversation with the video’s producer or later on discussing these films with others. You can now have live video chats on YouTube using the Google+ Hangouts On Air service because Google’s YouTube has opened up its live streaming service to all users in good standing.

The live chat box appears to the right of the video player as soon as the live stream starts. Both the video and the live chat’s material will be archived once the live stream stops. People can rewatch the video with live chat if necessary.

On YouTube, there are two different live chat views:

• Best chat: The messages that may hurt you are filtered out in this display.
• Live chat: No messages are filtered in this display.

Additionally, the live chat will not be available if the channel or live stream is intended for children.

2. How to comment on YouTube live chat?

YouTube users would like to comment on the live chat when the stream starts. Here are the steps for posting a comment in the YouTube Live Chat

Step1Create a YouTube account and sign in using your username and email. You cannot post any messages at tall if you are not signed into your YouTube account.

Step2Join the live stream. Click the live stream that you want to watch after selecting it.

Step3Click where it says, “Live Chat” and start typing anything you want to publish in the chat box. Next, select the

send button.

Additionally, a number of YouTube viewers frequently lament their inability to comment on livestreams or the fact that their messages keep disappearing. Because certain comments are flagged as spam and filtered, this is the cause. There is no other option but to post constructive criticism. If the streamer is one you enjoy or if you don’t want to miss the author’s next live stream. Then choose “HIDE Chat” if you don’t want to see any comments at all. The procedures below can be used if you simply want to have a private conversation or reply to someone.

Conclusion

You now know what YouTube live chat is and how to participate in it thanks to this post. I hope it will be beneficial to you.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Create the Stranger Things Upside Down Effect Video

With stranger things season 4 ending, it seems like great timing to make a stranger things style transition to the Upside Down. In the Netflix series Stranger Things, there is an opposite version of our world called the Upside Down. The Upside Down is dark, creepy, and possibly filled with aliens, monsters, creatures, and other things.

Now, you can also apply the Stranger Things Upside Down Effect to your video! This effect combines camera tricks and video editing within Filmora to transition from the normal world into the Upside Down.

How-to Guide

1) Preparation

To make this effect, you will need two footage shots: one with the camera moving down and one with the camera coming back up.

When shooting for the footage, follow the steps below:

First shot

1. Find any item close enough to the ground that we can block our frame with.

1. Once you have your talent lined up, rotate your camera while lowering it below the foreground item at a constant speed and leaving the camera there. The key is making sure when you go behind the object, the frame is nothing but black.

For the next scene, have your actor change positions, or you can change the set around to look like the Upside Down. For instance, adding fake plants and flickering lights.

Second shot

Start bringing your camera back up at the same speed and rotate it again in the direction it was moving.

2) Steps

After you have all the footage, you can start editing it on Filmora. If you haven’t installed it yet, you can download Filmora at their official website at https://filmora.wondershare.com .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Now, launch Filmora on your PC and follow the steps below:

Step1 Take your first clip in the “normal” world and drag it down to a video track on the timeline. Trim the edge of the clip, so it ends on pure black and in a downward motion.

Step2 Drag the second clip (in the Upside Down) onto the video track on the timeline after the first clip. Trim this video, so it begins in pure black and an upward motion.

Cut the clips to get the timing right since it should be a very fast transition. You can cut in the black frames so they won’t be too apparent.

If you don’t have a perfectly smooth transition, you can add a dissolve by going to Transitions > Basic > Dissolve.

Color Grading and Effects

After the transition, you can make the clip look a lot more like the Upside Down from the show with a color grade and Filmora effects. Follow the steps below:

Step1 Double-click on your second clip, then go to Color > Advanced. For a quick edit, you can try one of the presets available, such as “cool film.” It will give you the colder blue tones that Stranger Things used for the Upside Down.

Step2 You can further edit the color grading in the white balance menu. Drag the slider to the left to get a blue, cold vibe for the Upside Down.

The “cool” or “warm” color grading technically talks about color temperature. A “warmer” look will be more orange, and a “colder” look will be bluer. You can also use the tint slider to fine-tune the look.

Step3 Next, move down to the color, lower the brightness and increase contrast. It makes the scene darker and more sinister than the normal world.

Step4 Finally, go down to the vignette and drag the amount slider a tiny bit to give a Vinnette around your clip.

3) Pro Tips

You can still make your clip look even more like Upside Down with some Filmora elements.

Go to Elements > Smoke > Smokescreen 2. Drag this element on top of your Upside Down clip and trim it, so it starts at the same time the clip leaves the black frame.

You can adjust the opacity by double-clicking the smoke effect to open the setting.

Finally, go to the Transition > Basic > Dissolve to the start of the smoke and adjust it when the smoke gradually appears.

Resources from Filmostock

You can also use filmstock effects to bring our video to the next level. Go to Elements > Fire > Large Scale 12 and drag it down on top of your clip and the smoke.

Double-click the clip and change the scale of the effect to your needs. Then, go to compositing to change the blending mode to the screen to help the effect blend in more.

Now, go to color and open the white balance menu. Drag the two sliders to change the color of the particles to match your clip.

Summary

That is all you need to make a Stranger Things Upside Down effects to your video. Let us know if there are any other effects from tv shows you want to learn how to make.

Free Download For macOS 10.14 or later

Now, launch Filmora on your PC and follow the steps below:

Step1 Take your first clip in the “normal” world and drag it down to a video track on the timeline. Trim the edge of the clip, so it ends on pure black and in a downward motion.

Step2 Drag the second clip (in the Upside Down) onto the video track on the timeline after the first clip. Trim this video, so it begins in pure black and an upward motion.

Cut the clips to get the timing right since it should be a very fast transition. You can cut in the black frames so they won’t be too apparent.

If you don’t have a perfectly smooth transition, you can add a dissolve by going to Transitions > Basic > Dissolve.

Color Grading and Effects

After the transition, you can make the clip look a lot more like the Upside Down from the show with a color grade and Filmora effects. Follow the steps below:

Step1 Double-click on your second clip, then go to Color > Advanced. For a quick edit, you can try one of the presets available, such as “cool film.” It will give you the colder blue tones that Stranger Things used for the Upside Down.

Step2 You can further edit the color grading in the white balance menu. Drag the slider to the left to get a blue, cold vibe for the Upside Down.

The “cool” or “warm” color grading technically talks about color temperature. A “warmer” look will be more orange, and a “colder” look will be bluer. You can also use the tint slider to fine-tune the look.

Step3 Next, move down to the color, lower the brightness and increase contrast. It makes the scene darker and more sinister than the normal world.

Step4 Finally, go down to the vignette and drag the amount slider a tiny bit to give a Vinnette around your clip.

3) Pro Tips

You can still make your clip look even more like Upside Down with some Filmora elements.

Go to Elements > Smoke > Smokescreen 2. Drag this element on top of your Upside Down clip and trim it, so it starts at the same time the clip leaves the black frame.

You can adjust the opacity by double-clicking the smoke effect to open the setting.

Finally, go to the Transition > Basic > Dissolve to the start of the smoke and adjust it when the smoke gradually appears.

Resources from Filmostock

You can also use filmstock effects to bring our video to the next level. Go to Elements > Fire > Large Scale 12 and drag it down on top of your clip and the smoke.

Double-click the clip and change the scale of the effect to your needs. Then, go to compositing to change the blending mode to the screen to help the effect blend in more.

Now, go to color and open the white balance menu. Drag the two sliders to change the color of the particles to match your clip.

Summary

That is all you need to make a Stranger Things Upside Down effects to your video. Let us know if there are any other effects from tv shows you want to learn how to make.

Also read: