How to Make A Slideshow Video (+Filmora Techniques)

You have taken photos and videos all over your trip. Showing them to your friends and family can be a hassle if you have a lot of pictures. Viewing them all at once is possible by creating a slideshow video.

The slideshow video combines all the memories in one place. To make one on your own, we prefer just one best UI editing tools, Wondershare Filmora.

Before we create a slideshow, ensure to learn the basics of the slideshow video. Then, scroll below to get more!

Part 1. What Is a Slideshow Video?

A slideshow video is a video that combines your photos and videos to create a montage. This slideshow can be used as a collection of memories you can watch whenever you like.

You might have a photo album lying around somewhere in your house. A slideshow video can act like a modern-day photo album. But instead of photos, you can also add videos and create a monument of your precious memories.

Modern-day content creators on Youtube and other platforms can use a slideshow method to create short recap videos of their travels.

Part 2. What Are Some of the Uses of Slideshow Videos?

A slideshow video can be a great way to summarize all the moments of a marriage ceremony, graduation event, etc. And the list goes on and on.

• A wedding ceremony
• Anniversary recording
• A graduation ceremony
• A birthday party
• Your pet
• Your friends
• Your family
• A trip that you went on

Part 3. What Are the Benefits of a Slideshow?

There are many benefits to creating a slideshow video.

A long-lasting memory

Creating a slideshow video can be a digital reminiscent, allowing you to hold a precious video with your friends and family. Apart from physical portraits, a slideshow video will be a digital backup for your memories that you can watch in the future.

Easy to save and share

Since a video slideshow is a digital content, typically with an extension .mp4, .mov, etc., you can watch it whenever and wherever you want. Moreover, you can conveniently send it to the person who spent the time and shares the same memories with you.

Part 4. What Will You Need To Make a Slideshow?

To create an attractive slideshow video, you must fulfill the following requirements.

1. Good Quality Photos

To create a good slideshow, you must have good-quality photos with good resolution. Always take pictures with a good-quality camera or a mobile phone whenever you want to create a slideshow. Using filters in the editing software can disrupt the quality of your slideshow.

2. Video Clips

The slideshow is always combined with videos and photos. After taking good-quality images, remember always to record short video clips you can add between your pictures.

3. A Good Video Editor - Wondershare Filmora

To edit a slideshow video, you will need editing software. There’s no better tool to do the job than Wondershare Filmora . Wondershare Filmora enables you to make creative and appealing videos. It has a very engaging system UI that allows even novice users to get the hang of it quickly. You will learn how to make a slideshow in a few simple steps.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Let’s start with the step-by-step instructions for making a slideshow video now that you know the requirements for generating a slideshow.

Part 5. Step-by-Step Guide to Creating a Slideshow Video

Utilizing filmora will reduce your workload while producing quality work. Follow the below step-by-step guide to make your slideshow video instantly!

Step1 Download Wondershare Filmora

Wondershare Filmora will provide the working platform. Follow the below steps to download it:

• First, install the Wondershare Filmora.
• Then, launch this application on your PC or Mac

Let’s proceed to edit our video after downloading the Wondershare Filmora software. Continue reading to find out how to begin the editing process.

Step2 Import your Photos and Videos

Importing your videos and pictures to Filmora’s media panel is best to have them all in one folder. Therefore, when you open Wondershare Filmora, you will notice the main import window in the top left corner.

• Click in the center of the import window upon the import icon.
• Browse from the PC library to where your target Videos and Photos are stored.
• Please select the required videos and photos and Open

Your next step will be to add the imported videos and images to the timeline.

Step3 Add your Photos and Videos to the Timeline

When you have multiple videos and photos, you can add all of them simultaneously. Or you can also add them one by one wherever you need. Follow the steps mentioned:

• Right-click on the photo or video you want.
• Keep holding the Right-click and drag it down to the timeline.

Now that we have imported your photos and videos into the timeline, it is time to align and add text.

Step4 Add the Title

To create an attractive slideshow, you will need to add a title before the start of the video. Doing so will allow you to gain more viewers and audiences.

Add a Black Screen

The black screen will eventually act like a canvas to give your title a good look. To add a black screen, follow the steps mentioned:

• Click on the media icon from the bar above the import window.
• You will notice many tabs on the left-hand side under a drop-down bar.
• Scroll below to find the sample media
• Download the black color if it is not downloaded already.
• Click and drag it down below to the start of your video.

Add a Title Tile

Now that we have our canvas, we will now add the title. Above the import media library, there will be a Title icon.

• Click on the title icon, and select the title that you want for your video by browsing and scrolling down.
• For this purpose, we will use a simple title tile called “Title 29.”

Note: You can find the same title by scrolling, browsing, or searching in the search bar above the import library.

• Click and drag the title onto the black screen that we added.
• Double-click the title to open its settings.
• Here you can type in the text that you want.

You can also change its font. When you click on the font bar, a drop-down option will pop up, and you choose whichever you like.

• Change the animation of the text title from the top left corner animation

Change The Timing of The Title

You can also adjust the timing of the title by below steps:

• Click on the advanced option in the bottom right corner, and settings will pop up.
• Find the title bar and drag it to the right side to increase the timing of the title.

After adding the title, it’s time to go with fading effect as shown below!

Step5 Add a Fade effect

You can also add a fade transition to the start of your video. It will blend the title with the first clip. Follow the steps mentioned to add the transition effects:

• Search the Fade option from the Transitions tab above the import window

Note: A fade transition will allow your title to fade into the first clip creating a visually pleasing effect.

• Download the Fade transition and drag it between the Black screen and the first clip.

Now that we have added a transition, it is time to move on to our music!

Step6 Add The Music

You can add your music to the slideshow from your PC library, but make sure you have the music rights. It is better to use stock audio by following the steps:

• Click on the Audio icon on the bar above the import window, and the list will pop up.
• Please browse the library to find music that best suits your video and download it.
• Then add it to the timeline’s audio track.

Add Beat Detection

To match your video clips properly with the music, so it remains in sync, you can adjust it with the beat of the music. To add beat detection, follow the steps mentioned:

• Right-Click on the audio that you selected in the audio library.
• You will see a pop-up list, and in the options, you will see Beat detection.
• Click on Beat detection.

• Then click on the audio and drag it below on the timeline.

Match The Video With The Audio Markers

To have the full advantage of beat detection, you must adjust your videos and photos to the markers. Follow the steps mentioned below to do so:

• Check that the video clips are in sync with the marker on the audio.
• For this, drag one video end to a marker or as many videos as you want.
• Ultimately, you will create a timeline in which your videos sync with the audio beat.

After syncing your videos and photos to the audio, it is time to move on to the scaling and background blur.

Step7 Scale and Blur The Background

Now, some of the pictures you have added must-have black borders. It usually means that your image is shorter than the aspect ratio.

If you leave the picture/photo as it is, the black borders will make it look shorter and out of proportion. As a result, it gives a generally poor look, as shown below.

To counter this problem, follow some easy steps:

• Double-click on the picture with black borders, and it will open the settings list.
• Go into the Transform Here you can see multiple settings.
• Increase the size of your photo to match the aspect ratio.

Add a Background Blur Effect

In some cases where you have taken a portrait photo where the picture is vertical, it ultimately stays out of proportion to the aspect ratio.

Note: Simply scaling the image to match the aspect ratio size is not sensible in this case. Doing so will hide the many pretty features of a portrait.

To counter this problem, you can add a blur effect. This effect will turn your background blur, matching the aspect ratio. Follow the steps mentioned below:

• Click on the Effects tab above the import window and search for Blur.
• Download the blur effect that suits you best and then drag the blur effect above your photo in the timeline.

You will notice the background turn to a blur in the main play screen.

Step8 Add a Transition

You can also add a transition effect to spice up things. It can get bland when your video or photo changes from one to another. To create a good slideshow video, you can add a transition effect by following the steps mentioned below:

• Click on the Transition icon above the import window.
• Browse the library until you find a transition you like, then download one.
• Click on the transition and drag it between the clips.

Adjust The Duration and Placement of The Transition

Now it’s time to adjust the duration and placement of the transition. For this, you can follow the steps mentioned below:

• Double-click on the transition effect, and it will open the settings list.
• You can adjust the duration by setting the timer as per your requirement.

Note: If other transitions are added to the timeline, you can adjust them by clicking Apply to all.

When you have adjusted the slideshow transitions, it is time to move on to the effects and filters.

Step9 Add the Effects and Filters

If you create a slideshow video of your trip to a historical place. You can add a Vintage filter to your video to give it that vintage tint. Follow the steps mentioned below:

• Head over to the Effects tab, where the effects library will open up
• Select any effect and download
• Click on the effect and drag it to drop in the timeline.

Combining a vintage effect with a dreamy glow will make your video pop up even more. To add a nostalgic glow to your video, follow the steps:

• Click on the effects and search for Glow in the search bar.
• Click and drag the glow effect above the timeline and ensure the effect is in the separate video timeline.
• Ensure the effect is applied to every photo and video.
• Double-click on the effect, and settings will open in the import window.
• Then, you can adjust the radius and opacity of the video. Adjust as you desire.

We are almost done. Let us now move toward our outro!

Step10 Create an Outro

The steps we will do will be similar to the ones we did initially. As we are creating, we will again need a canvas. Follow the steps mentioned below:

• Head to the media icon on the bar and scroll until you see the sample media tab.
• In the sample color option, drag and drop the black color at the end of your video.

Add an Outro Transition

To finalize things, add a transition effect at the end of the clip by these steps:

• In the Transition tab, search for the Fade effect.
• Drag and drop the Fade effect between your last video clip and the Black screen.

Fade out The Audio

If the audio suddenly ends at the end of your slideshow, it will create a bitter effect. Therefore, you should always fade out audio at the end of the video. To do this, follow the steps mentioned:

• Double-click on the audio in the timeline, and the settings list will pop up.
• On the top section of the import window, you will notice fade options.
• In the fade-out bar, drag it to the side to set your fade-out timer.

You can show your friends and family the slideshow or upload it to Youtube. Play the Slideshow Video from the beginning to see the changes.

Conclusion

By the steps mentioned above, you can create a slideshow video. Give every moment a chance to align everything on one side! The slideshow will also save your device space by aligning everything in one video.

Free Download For macOS 10.14 or later

Let’s start with the step-by-step instructions for making a slideshow video now that you know the requirements for generating a slideshow.

Part 5. Step-by-Step Guide to Creating a Slideshow Video

Utilizing filmora will reduce your workload while producing quality work. Follow the below step-by-step guide to make your slideshow video instantly!

Step1 Download Wondershare Filmora

Wondershare Filmora will provide the working platform. Follow the below steps to download it:

• First, install the Wondershare Filmora.
• Then, launch this application on your PC or Mac

Let’s proceed to edit our video after downloading the Wondershare Filmora software. Continue reading to find out how to begin the editing process.

Step2 Import your Photos and Videos

Importing your videos and pictures to Filmora’s media panel is best to have them all in one folder. Therefore, when you open Wondershare Filmora, you will notice the main import window in the top left corner.

• Click in the center of the import window upon the import icon.
• Browse from the PC library to where your target Videos and Photos are stored.
• Please select the required videos and photos and Open

Your next step will be to add the imported videos and images to the timeline.

Step3 Add your Photos and Videos to the Timeline

When you have multiple videos and photos, you can add all of them simultaneously. Or you can also add them one by one wherever you need. Follow the steps mentioned:

• Right-click on the photo or video you want.
• Keep holding the Right-click and drag it down to the timeline.

Now that we have imported your photos and videos into the timeline, it is time to align and add text.

Step4 Add the Title

To create an attractive slideshow, you will need to add a title before the start of the video. Doing so will allow you to gain more viewers and audiences.

Add a Black Screen

The black screen will eventually act like a canvas to give your title a good look. To add a black screen, follow the steps mentioned:

• Click on the media icon from the bar above the import window.
• You will notice many tabs on the left-hand side under a drop-down bar.
• Scroll below to find the sample media
• Download the black color if it is not downloaded already.
• Click and drag it down below to the start of your video.

Add a Title Tile

Now that we have our canvas, we will now add the title. Above the import media library, there will be a Title icon.

• Click on the title icon, and select the title that you want for your video by browsing and scrolling down.
• For this purpose, we will use a simple title tile called “Title 29.”

Note: You can find the same title by scrolling, browsing, or searching in the search bar above the import library.

• Click and drag the title onto the black screen that we added.
• Double-click the title to open its settings.
• Here you can type in the text that you want.

You can also change its font. When you click on the font bar, a drop-down option will pop up, and you choose whichever you like.

• Change the animation of the text title from the top left corner animation

Change The Timing of The Title

You can also adjust the timing of the title by below steps:

• Click on the advanced option in the bottom right corner, and settings will pop up.
• Find the title bar and drag it to the right side to increase the timing of the title.

After adding the title, it’s time to go with fading effect as shown below!

Step5 Add a Fade effect

You can also add a fade transition to the start of your video. It will blend the title with the first clip. Follow the steps mentioned to add the transition effects:

• Search the Fade option from the Transitions tab above the import window

Note: A fade transition will allow your title to fade into the first clip creating a visually pleasing effect.

• Download the Fade transition and drag it between the Black screen and the first clip.

Now that we have added a transition, it is time to move on to our music!

Step6 Add The Music

You can add your music to the slideshow from your PC library, but make sure you have the music rights. It is better to use stock audio by following the steps:

• Click on the Audio icon on the bar above the import window, and the list will pop up.
• Please browse the library to find music that best suits your video and download it.
• Then add it to the timeline’s audio track.

Add Beat Detection

To match your video clips properly with the music, so it remains in sync, you can adjust it with the beat of the music. To add beat detection, follow the steps mentioned:

• Right-Click on the audio that you selected in the audio library.
• You will see a pop-up list, and in the options, you will see Beat detection.
• Click on Beat detection.

• Then click on the audio and drag it below on the timeline.

Match The Video With The Audio Markers

To have the full advantage of beat detection, you must adjust your videos and photos to the markers. Follow the steps mentioned below to do so:

• Check that the video clips are in sync with the marker on the audio.
• For this, drag one video end to a marker or as many videos as you want.
• Ultimately, you will create a timeline in which your videos sync with the audio beat.

After syncing your videos and photos to the audio, it is time to move on to the scaling and background blur.

Step7 Scale and Blur The Background

Now, some of the pictures you have added must-have black borders. It usually means that your image is shorter than the aspect ratio.

If you leave the picture/photo as it is, the black borders will make it look shorter and out of proportion. As a result, it gives a generally poor look, as shown below.

To counter this problem, follow some easy steps:

• Double-click on the picture with black borders, and it will open the settings list.
• Go into the Transform Here you can see multiple settings.
• Increase the size of your photo to match the aspect ratio.

Add a Background Blur Effect

In some cases where you have taken a portrait photo where the picture is vertical, it ultimately stays out of proportion to the aspect ratio.

Note: Simply scaling the image to match the aspect ratio size is not sensible in this case. Doing so will hide the many pretty features of a portrait.

To counter this problem, you can add a blur effect. This effect will turn your background blur, matching the aspect ratio. Follow the steps mentioned below:

• Click on the Effects tab above the import window and search for Blur.
• Download the blur effect that suits you best and then drag the blur effect above your photo in the timeline.

You will notice the background turn to a blur in the main play screen.

Step8 Add a Transition

You can also add a transition effect to spice up things. It can get bland when your video or photo changes from one to another. To create a good slideshow video, you can add a transition effect by following the steps mentioned below:

• Click on the Transition icon above the import window.
• Browse the library until you find a transition you like, then download one.
• Click on the transition and drag it between the clips.

Adjust The Duration and Placement of The Transition

Now it’s time to adjust the duration and placement of the transition. For this, you can follow the steps mentioned below:

• Double-click on the transition effect, and it will open the settings list.
• You can adjust the duration by setting the timer as per your requirement.

Note: If other transitions are added to the timeline, you can adjust them by clicking Apply to all.

When you have adjusted the slideshow transitions, it is time to move on to the effects and filters.

Step9 Add the Effects and Filters

If you create a slideshow video of your trip to a historical place. You can add a Vintage filter to your video to give it that vintage tint. Follow the steps mentioned below:

• Head over to the Effects tab, where the effects library will open up
• Select any effect and download
• Click on the effect and drag it to drop in the timeline.

Combining a vintage effect with a dreamy glow will make your video pop up even more. To add a nostalgic glow to your video, follow the steps:

• Click on the effects and search for Glow in the search bar.
• Click and drag the glow effect above the timeline and ensure the effect is in the separate video timeline.
• Ensure the effect is applied to every photo and video.
• Double-click on the effect, and settings will open in the import window.
• Then, you can adjust the radius and opacity of the video. Adjust as you desire.

We are almost done. Let us now move toward our outro!

Step10 Create an Outro

The steps we will do will be similar to the ones we did initially. As we are creating, we will again need a canvas. Follow the steps mentioned below:

• Head to the media icon on the bar and scroll until you see the sample media tab.
• In the sample color option, drag and drop the black color at the end of your video.

Add an Outro Transition

To finalize things, add a transition effect at the end of the clip by these steps:

• In the Transition tab, search for the Fade effect.
• Drag and drop the Fade effect between your last video clip and the Black screen.

Fade out The Audio

If the audio suddenly ends at the end of your slideshow, it will create a bitter effect. Therefore, you should always fade out audio at the end of the video. To do this, follow the steps mentioned:

• Double-click on the audio in the timeline, and the settings list will pop up.
• On the top section of the import window, you will notice fade options.
• In the fade-out bar, drag it to the side to set your fade-out timer.

You can show your friends and family the slideshow or upload it to Youtube. Play the Slideshow Video from the beginning to see the changes.

Conclusion

By the steps mentioned above, you can create a slideshow video. Give every moment a chance to align everything on one side! The slideshow will also save your device space by aligning everything in one video.

Dollar-Store DIY Hacks to Use for Filmmaking

Filmmaking is usually an expensive hobby, but slowly over time, it’s become more affordable. Regular gear like cameras and lights are slightly cheaper, but there are plenty of ways to DIY regular items to use as film gear.

Making DIY film gear may not give you the same look as professional gear, but it could be a fun project and give you similar looks on a budget. In this article, let’s look at some dollar-store DIY hacks that you can use for filmmaking on a budget.

Tip 1. Add foreground elements to improve the frame of videos

Let’s start with something we can do to enhance your framing. Sometimes we want to direct our audience’s attention to a specific part of the frame. In this case, it’s the talent of placing an object in the shot’s foreground that can help us do that. While also making a more attractive frame. At the dollar store, try using something like these fake plants.

You can place it in front of your lens. Then focus on the talent behind it, giving a blurry foreground that perfectly frames the talent. Here’s how the shot looks with and without foreground elements.

Note: Remember, you can also use a different angle than simply approaching the object from the front. You can try and use different perspectives until you find the shot or footage you are looking for.

Tip 2. Adjust lights with poster boards

The shot below looks dark and boring because the background has no light. Here’s the shot with and without the lights.

A practical light is a light that shows up on screen rather than lighting talent from off-screen. For example, some dollar stores have small LED accent lights for around three dollars.

Others even have lights with adhesive backings that allow you to place them all over the room—creating great lighting accents with small eye-catching pockets of light.

On film sets, crews use a bounce to reflect light from one light source in another direction. At the dollar store, we can find something like this poster board to get a similar effect.

By reflecting the light onto the bounce, we get softer, more spread-out light when it’s reflected. Then you will get the result in a nicer look. Using poster boards, you can do multiple things with light.

• Use white to bounce light.
• Use black as a flag to shape or block light.

• You can also use green for a small green screen when filming a product video

You might have seen how big production companies create those alienated landscapes, such as in the movie Avatar and many more.

The concept is recording your object in front of a green screen behind it. Then, it’s much easier to add a separately filmed background to the final footage with a video editor like Filmora.

Tip 3. Smooth audio with felt pads or socks

Do you ever have audio pop while you are recording? It can get annoying. So, to fix the issues, we are now teaching you three practical ways.

1. Felt pads

Felt pads with adhesive backs can be stuck onto noisy props like a coffee mug. This way, we won’t hear the mug hitting the table when we’re recording sound.

2. Socks as pop filters

Professionals use what they call a pop filter because a pop filter can reduce the loud pops from their mouths. But what is pop? Pops usually occur when people say words that start with the letter P or B.

Then what is a pop filter? You might have seen in some YouTube videos, especially live streamers, where they use a microphone with a plate on its head; that’s called a pop filter. You can purchase pricey gear like a pop filter, or we can get a pack of cheap socks at the dollar store and place them over the mic.

It will make your voiceover slightly quieter, but it should also get rid of the popping. So keep adding socks until you hear no more pops in your voiceover.

Conclusion

See how easy it was! Keep in mind these dollar store hacks in your next video. And you can edit your footage like a pro with an easy-to-use video editor like Wondershare Filmora . Keep exploring different ideas and perspectives to record.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Tip 2. Adjust lights with poster boards

The shot below looks dark and boring because the background has no light. Here’s the shot with and without the lights.

A practical light is a light that shows up on screen rather than lighting talent from off-screen. For example, some dollar stores have small LED accent lights for around three dollars.

Others even have lights with adhesive backings that allow you to place them all over the room—creating great lighting accents with small eye-catching pockets of light.

On film sets, crews use a bounce to reflect light from one light source in another direction. At the dollar store, we can find something like this poster board to get a similar effect.

By reflecting the light onto the bounce, we get softer, more spread-out light when it’s reflected. Then you will get the result in a nicer look. Using poster boards, you can do multiple things with light.

• Use white to bounce light.
• Use black as a flag to shape or block light.

• You can also use green for a small green screen when filming a product video

You might have seen how big production companies create those alienated landscapes, such as in the movie Avatar and many more.

The concept is recording your object in front of a green screen behind it. Then, it’s much easier to add a separately filmed background to the final footage with a video editor like Filmora.

Tip 3. Smooth audio with felt pads or socks

Do you ever have audio pop while you are recording? It can get annoying. So, to fix the issues, we are now teaching you three practical ways.

1. Felt pads

Felt pads with adhesive backs can be stuck onto noisy props like a coffee mug. This way, we won’t hear the mug hitting the table when we’re recording sound.

2. Socks as pop filters

Professionals use what they call a pop filter because a pop filter can reduce the loud pops from their mouths. But what is pop? Pops usually occur when people say words that start with the letter P or B.

Then what is a pop filter? You might have seen in some YouTube videos, especially live streamers, where they use a microphone with a plate on its head; that’s called a pop filter. You can purchase pricey gear like a pop filter, or we can get a pack of cheap socks at the dollar store and place them over the mic.

It will make your voiceover slightly quieter, but it should also get rid of the popping. So keep adding socks until you hear no more pops in your voiceover.

Conclusion

See how easy it was! Keep in mind these dollar store hacks in your next video. And you can edit your footage like a pro with an easy-to-use video editor like Wondershare Filmora . Keep exploring different ideas and perspectives to record.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Fade to Black Premiere Pro

The most fundamental and typical sort of Fading is a simple cut, which is often used by editors to go from one shot to another. Applying effects between clips, at the start of a clip, or at its finish may sometimes help you smooth out or stylize your edit. Fade to black transition premiere pro can be used to get this outcome. To help users create current and trendy styles, Premiere Pro features a vast range of effects and tools including fade to black in premiere pro.

Going back to the days of black and white may sometimes be a welcome change of pace in the era of vivid digital and flashy film. Being a professional editor, you’ll understand that editing should be undetectable. If an editor has done their job well, no one will notice their efforts. You’ve failed as soon as the audience realizes the cut has occurred. But fading out to black (or white) seems out of the ordinary. Use this how to fade to black premiere pro guide to learn the steps in Adobe PR.

Part 1. What is Fade to Black

You will become a better filmmaker if you expand your vocabulary in video editing by learning about transitions. The dissolve-to-black, or fade-to-black (a fade to black in premiere pro), works well in part because it has a certain theatrical feel to it. A fade-out/fade-down, often known as a fade-to-black in theater, occurs in total darkness. One of the key components of video editing is using transitions in Adobe Premiere Pro.

The fundamental elements of many other transitions are fades. Effective use of Fades is a crucial skill in your video editing repertoire since it is subtle to the point of practically being undetectable. A video transition called a “fade to black” causes a scene or clip to gradually conclude with a black backdrop. It dates back to the time when the stage curtains were drawn and the lights were dimmed during a theatrical performance. The stage therefore went completely black while the team behind hurriedly changed into new clothing and stage items for the following action.

Those that seem to take place close together chronologically are edited together, while scenes that occur at separate periods or locales are faded out. These are recognizable features of the film. They alert us to the fact that the tale is moving to a later time or place, either thematically, chronologically, or geographically. In a practical sense, this is the time when the cast and crew switch out the set and clothes. But the fade-to-black marks the end of the scene in a symbolic and narrative sense.

Part 2. How to Fade to Black in Premiere Pro

One of the most widely used video editing programs is Adobe Premiere Pro. In Premiere Pro, a number of transitions are available. One of the first, most important responsibilities for a film editor to do is the utilization of numerous transitions. In fact, many aspiring film editors start off by learning how to fade to black in Premiere. Fortunately, creating a fade to black transition in Premiere isn’t that difficult to do step by step. Everything from straightforward dissolves to wipes, slides, and zooms may be found here.

Steps to Fade to Black in Premiere Pro:

Step1Launch the Program and Refer to the Effects

After launching Adobe Premier Pro CC, simply drag the Dip to Black effect from the Effects tab to the very start or very finish of the clip you want to use. The effect may then be moved around to change its duration as needed. Add two clips to the Premiere Pro timeline.

Step2 Add the fade to black transition

Drag and drop the Dip to Black effect between two clips on the timeline after selecting the Effects tab and typing “dip to black” into the search field. The right half of the clip will display the dip to black effect.

Step3 Customize the fade to black effect

Go to Effect Controls and, while the dip to black effect is chosen, alter the alignment to Center at Cut. Before video B starts, video A will now fade to black.

Step4 Optionally change the fade-to-black effect’s duration

just extend the timeline’s fade to black effect at the very end. The slower and smoother the fade to black effect will be, and vice versa, as you move the effect outward.

Part 3. Premiere Pro Alternative to Fade to Black

Although Premiere Pro is a powerful tool to fade to black, but what if your audience wishes to evoke a certain atmosphere, swap between tales, adopt a different point of view, spice up the narrative, or advance or recede in time? Here, more creative transitions would be beneficial. For that, Filmora is a fantastic substitute for Premiere Pro if you need to quickly apply a fade to black transition to your video.

The tool is packed with built-in features that are powerful enough to polish your videos in addition to fade to black effect. For creating scroll-stopping video content, you can also discover a ton of completely adjustable video templates for YouTube, TikTok, Instagram, Facebook, and other platforms as well as a ton of attractive overlay transitions and royalty-free music and sound effects.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Steps to Fade to Black Using Filmora

Step1 Install Filmora on your laptop

You must first download this software application to your computer from one of the following sources in order to start:

You must install it on your computer once you’ve done downloading it before you can use it with your laptop.

Step2 Customize the Video

After the Import, you may edit your audio recordings using tools that are completely customizable. Use the editor in Filmora to edit your recorded audio files, using simple to advanced editing techniques. Your recorded video may be improved using Filmora’s Editor by adding animated titles, spectacular effects, audio enhancements, and more.

Step3 Fade to Black Videos

Spice up the Fade effect into your videos and add the effect into the timeline. You will be able to make it black at the ends by customizing the effect inside the Fade window.

Step4 Add VFX to Your Video

The software is embedded with Effects primarily to give your videos a polished appearance. You may utilize a variety of its eye-catching and adjustable effects to make your video productions stand out from the competition. In this area, we’ve covered some of the best effects for bringing life to your dull, unprofessional videos as shown below:

Step5 Save or Share the Videos

Finally, you may use the complete Filmora editor as previously mentioned when you’ve done editing the recorded video. When you want to submit your creative work right away to YouTube or another well-known website, click the Export option and choose the platform where you want to distribute your video clip. If you like, you may even make changes to the video before uploading it.

Part 4. Related FAQs

How do you fade a clip to black?

Utilizing the dip to black transition in your video sequence is the key to learning how to fade to black in Premiere. To produce the Fade to Black reaction you’re trying to accomplish, you must Dip to Black. Simply drag the feature to the conclusion of your sequence to complete the task. Where you want the fading to start and terminate. The length of the fade or dip may be altered using the effects control panel.

How do I fade to white in Premier Pro?

Contrarily, as this montage demonstrates, fading to white may be utilized to convey uncertainty or a feeling of optimism. One of the most traditional transition effects that is often utilized in movies and videos is the fade to white. Your film gains a cinematic feel from it, and the change from one scene to the next is more seamless.

How do you keyframe colors in Premiere?

You can find other color problems in Premiere Pro that you need to fix. Therefore, it makes sense to adjust your highlight, mid, and black points first and have them dialed in before addressing saturation and color temperature. Open the Color panel on the right side of the screen while your adjustment layer is highlighted in the sequence. Make your color adjustments while keeping in mind that the effect will be applied to every clip below it in the timeline.

We only stop feeling immersed when we notice abrupt cuts. It makes sense to know when to color correct your footage throughout the video editing process. If you color correct your film too early, you can be wasting your time by color grading footage that you might eventually cut out or never use. We hope that this article will assist you in streamlining your editing process if you’re just starting started using Premiere Pro’s adjustments layers. Try experimenting with Filmora if you often utilize them to improve your edits.

Free Download For macOS 10.14 or later

Steps to Fade to Black Using Filmora

Step1 Install Filmora on your laptop

You must first download this software application to your computer from one of the following sources in order to start:

You must install it on your computer once you’ve done downloading it before you can use it with your laptop.

Step2 Customize the Video

After the Import, you may edit your audio recordings using tools that are completely customizable. Use the editor in Filmora to edit your recorded audio files, using simple to advanced editing techniques. Your recorded video may be improved using Filmora’s Editor by adding animated titles, spectacular effects, audio enhancements, and more.

Step3 Fade to Black Videos

Spice up the Fade effect into your videos and add the effect into the timeline. You will be able to make it black at the ends by customizing the effect inside the Fade window.

Step4 Add VFX to Your Video

The software is embedded with Effects primarily to give your videos a polished appearance. You may utilize a variety of its eye-catching and adjustable effects to make your video productions stand out from the competition. In this area, we’ve covered some of the best effects for bringing life to your dull, unprofessional videos as shown below:

Step5 Save or Share the Videos

Finally, you may use the complete Filmora editor as previously mentioned when you’ve done editing the recorded video. When you want to submit your creative work right away to YouTube or another well-known website, click the Export option and choose the platform where you want to distribute your video clip. If you like, you may even make changes to the video before uploading it.

Part 4. Related FAQs

How do you fade a clip to black?

Utilizing the dip to black transition in your video sequence is the key to learning how to fade to black in Premiere. To produce the Fade to Black reaction you’re trying to accomplish, you must Dip to Black. Simply drag the feature to the conclusion of your sequence to complete the task. Where you want the fading to start and terminate. The length of the fade or dip may be altered using the effects control panel.

How do I fade to white in Premier Pro?

Contrarily, as this montage demonstrates, fading to white may be utilized to convey uncertainty or a feeling of optimism. One of the most traditional transition effects that is often utilized in movies and videos is the fade to white. Your film gains a cinematic feel from it, and the change from one scene to the next is more seamless.

How do you keyframe colors in Premiere?

You can find other color problems in Premiere Pro that you need to fix. Therefore, it makes sense to adjust your highlight, mid, and black points first and have them dialed in before addressing saturation and color temperature. Open the Color panel on the right side of the screen while your adjustment layer is highlighted in the sequence. Make your color adjustments while keeping in mind that the effect will be applied to every clip below it in the timeline.

We only stop feeling immersed when we notice abrupt cuts. It makes sense to know when to color correct your footage throughout the video editing process. If you color correct your film too early, you can be wasting your time by color grading footage that you might eventually cut out or never use. We hope that this article will assist you in streamlining your editing process if you’re just starting started using Premiere Pro’s adjustments layers. Try experimenting with Filmora if you often utilize them to improve your edits.

Finding the Best Voice Changers for WhatsApp: Free and Paid

Ever thought of the best way to prank your friends via WhatsApp voice calls? WhatsApp voice changing app is what you need. Not any voice changer, but one that offers quality services to end-users. Many software programs claim to render such services. However, not all are the perfect fit since the majority are substandard.

Are you looking for an efficient WhatsApp voice changer with a comprehensive user interface that you can use on your Windows, Mac, or mobile devices? You are at the right spot. Our team has browsed the internet and handpicked the best 7 WhatsApp voice-changing apps available in the global market today. We will share them with you here.

Try AI Voice Changer For Win 7 or later(64-bit)

Try AI Voice Changer For macOS 10.14 or later

Part 1. 7 Best Voice Changers for WhatsApp

Here are the seven (7) most powerful software or apps that offer quality voice-changing services on WhatsApp:

1. Magic Call[iOS] [Free with Limited Features]

Magic Call [iOS] is one of the best voice-changing apps available on the internet. The app lets you switch your voice into a fun and lovely one with complete ease. It’s a simple app available for download to Android and iOS devices.

Users of this WhatsApp voice changer find it simple to operate because of the comprehensive user interface and rich features it holds. Magic Call [iOS] is a freemium app and highly secured. The app provides you with several voice-changing options that you can choose from to prank your callers. Some of them are male, female, and robotic sounds. Additionally, it supports sounds like clap, laughter, gasp, and several others.

How to Use Magic Call [iOS] with WhatsApp

Open Google PlayStore or App Store on your Android device, and search Magic Call. Click on the corresponding key to download and install the app on your device, then follow the procedure below to change your WhatsApp voice:

Step1 Launch Magic Call [iOS], and grant it access to the necessary features such as contact, audio recording, etc.

Step2 Next, choose a contact from the list appearing on your display screen to speak to

Step3 Tap on the contact’s name, and then click on the Female Voice filter from the options that pop up.

Step4 Apply the WhatsApp voice-changer to spice up your conversation with friends and relatives on your contact.

2. Voicemod

Here is another fun-oriented software that permits you to change your voice during WhatsApp calls easily and quickly. Voicemod is a highly efficient WhatsApp voice changer popular among gamers, content creators, and more.

The app is well-customized with epic sound effects that you can select from to pimp your voice during calls. You can choose to sound like a robot, woman, man, or demon. Voicemod integrates with apps like TikTok, Elgato Stream, Audacity, Discord, Skype, and many more.

Also, Voicemod comes with voice filters. The app allows you to switch between scary, loud, or funny voices. Additionally, you have the chance to customize your vice via the Voicelab feature tucked into it. It’s a simple tool compatible with Windows, Mac, and Chromebook.

How to Use Voicemod with WhatsApp

Step1 Open your desired web browser on your PC, and navigate to the official website for Voicemod. A page as below will appear on your screen:

Click on the corresponding button to download and install a suitable version. Wait until the download is complete, and follow the on-screen instructions to configure the app. Ensure you grant permission to the necessary devices such as Microphone, etc.

Step2 Next, confirm the Voice Changer toggle at the bottom of the Window page is activated. Once that’s set, scroll through the library of voice filters, and sound effects to select your desired prank voice.

Step3 Now connect the selected Microphone to WhatsApp, host a call, and start enjoying the lovely prank voices from Voicemod.

3. Call Voice Changer [iOS]

Call Voice Changer is a simple yet powerful voice-changing app built with countless sound effects that you can use to fool your contacts during calls. The app helps you spice up your conversation with friends and families. It lets you select between funny, creepy, and loud voices.

Also, Call Voice Changer supports sound effects like birthday songs, cartoon characters, and lots more. All end-users of this app find it simple to operate. The reason is because of the clean user interface. Call Voice Changer provides you with real-time voice-changing effects- this means you have the privilege to change your voice at any time during calls.

How to Use Call Voice Changer- IntCall

Step1 On your iOS device, open the App Store, and click on the Search tab at the extreme lower right corner of your screen. Enter Call Voice Changer in the empty field provided and tap on the Enter key on your keypad.

Step2 A new screen showing the Call Voice Changer app will pop up. Here is what the app looks like:

Click on the GET button next to the app name. Validate your action when required. Launch the app after the successful download, accept the necessary conditions, and grant access if prompted.

Step3 When Call Voice Changer opens, add your cellphone number, and grant access to Microphone.

Next, select your preferred voice pitch on the next interface that pops up.

Step4 Choose your preferred sound effect from the available options, and make calls via WhatsApp.

4. Funcalls- Voice Changer & Call Recording

With over 100 voice effects, Funcalls is another wonderful WhatsApp voice-changer you can use to alter your voice during audio or video calls. The app makes it to our top list because of the quality features it holds. Funcalls is well-designed with a clean interface that lets you navigate around easily and quickly without involving a third party.

Besides voice changing, Funcalls lets you record your conversations during calls. This WhatsApp voice-changer works perfectly with mobile operating systems like Android and iOS devices. It’s a highly flexible app that permits you to change your voice using different pitches and speeds.

How to Use Funcalls- Voice Changer & Call Recorder

Step1 Depending on the mobile operating system you are using, launch the App Store, or Google PlayStore, click on the Search button and enter Funcalls in the appropriate field.

Tap on the appropriate button to install the app on your device.

Step2 Wait patiently for the installation to complete, and follow the on-screen prompts to set up the app with your Android or iOS device. Once the configuration is complete, click on the Dialer button at the bottom of the app screen. Enter a cellphone number by selecting the appropriate keys. Ensure you input the country code while dialing the number.

Step3 Now select your preferred voice effect from the options appearing on your screen.

Host the call, and download the audio recording. After the call, share the recording with friends and families for fun.

5. Prank Dial

Designed for novices and experts in the tech space, Prank Dial is another voice changer that integrates with WhatsApp. This lightweight app lets you change your voice during calls to spice up conversations with families and friends.

It’s a fun app customized with several background sound effects. From funny sounds to annoying, celebrations, scams, money, politics, and lots more. Prank Dial WhatsApp voice-changer offers quality services in free and paid subscription packages. Like the Funcalls-Voice Changer & Call Recording, Prank Dial also supports call recording.

How to Use Prank Dial with WhatsApp

Step1 Click the appropriate button on your Android or iOS device to open Google PlayStore or App Store. Enter Prank Dial in the field given to search the WhatsApp voice-changer.

Tap the corresponding button to download and install the app on your device. After the installation is over, open the app for operation.

Step2 Next, kindly grant Prank Dial access to calls, contact, and local storage. Pick a sound effect to prank your friend, and head to connect with a friend via WhatsApp.

Step3 Once the step above is complete, settle down and prank your friends. Export and share audio recordings with people on your contact list for fun.

6. Voice Changer with Effects

Here is another good WhatsApp voice-changer with top-notch sound effects that you can select from to prank your contacts. It is a high utility voice-changing app well-known for delivering all it promises. End-users have the freedom to switch a boring phone call into an interesting one by selecting a background effect.

How to Use Voice Changer with Effects with WhatsApp

Step1 Download and install Voice Changer with Effects on your smartphone. Launch the app, and grant necessary permission as required.

Step2 Next, locate the Microphone icon, and click on it. Speak to the mic, and add your desired background voice effect.

Step3 Once the step above is complete, edit the recording, and hit the Share button to send it to your contact.

You can share it via WhatsApp. To do that, select the WhatsApp icon

7. Narrator’s Voice

Lastly, Narrator’s voice is a top-rated WhatsApp voice-changing app designed with extraordinary background sound effects you can use to create a wonderful phone call experience. The app supports the text-to-speech feature. Thus, you can type, and Narrator’s Voice will convert into speech.

How to Use Narrator’s Voice with WhatsApp

Step1 Run Narrator’s Voice by clicking on the appropriate icon on your Android device.

Step2 Grant the app access to all the necessary apps and features, including the microphone. Speak to the microphone to proceed.

Step3 Edit your speech with sound effects, and click on Apply. When the editing is complete, click on Share to send to friends.

Part 2: FAQs

Q1. Can I change my voice during calls?

Yes, of course, you can!

However, you need a voice-changing app that supports real-time voice changing. You can select one from the list shared above. We mentioned seven (7) quality voice-changing apps that you can use to prank your contact during calls.

Q2. How to edit voice recordings before sharing them with friends?

Editing voice recording before sharing it with friends is straightforward if you have a voice editing tool like Wondershare Filmora. Wondershare Filmora is a world-leading video editing software with robust features that you need to edit your media files. It supports audio editing without distorting the file format.

Filmora allows you to detach audio from videos, delete, and adjust audio speeds with quality. Additionally, you can use the software to edit your videos, add transitions, effects, and more. This software works with popular computer systems like Windows and Mac. The software is simple to operate and offers quality results at a remarkably high speed. When compared with other video editing tools, Filmora stands out.

Conclusion

Now we’ve successfully explored the best 7 WhatsApp voice changers. Which do you wish to invest your funds in? While making a selection, we advise that you consider the subscription price, ease of use, and compatibility. If you want to edit your voice recordings before sharing them with friends and relatives, Filmora is the perfect tool to apply.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Try AI Voice Changer For Win 7 or later(64-bit)

Try AI Voice Changer For macOS 10.14 or later

Part 1. 7 Best Voice Changers for WhatsApp

Here are the seven (7) most powerful software or apps that offer quality voice-changing services on WhatsApp:

1. Magic Call[iOS] [Free with Limited Features]

Magic Call [iOS] is one of the best voice-changing apps available on the internet. The app lets you switch your voice into a fun and lovely one with complete ease. It’s a simple app available for download to Android and iOS devices.

Users of this WhatsApp voice changer find it simple to operate because of the comprehensive user interface and rich features it holds. Magic Call [iOS] is a freemium app and highly secured. The app provides you with several voice-changing options that you can choose from to prank your callers. Some of them are male, female, and robotic sounds. Additionally, it supports sounds like clap, laughter, gasp, and several others.

How to Use Magic Call [iOS] with WhatsApp

Open Google PlayStore or App Store on your Android device, and search Magic Call. Click on the corresponding key to download and install the app on your device, then follow the procedure below to change your WhatsApp voice:

Step1 Launch Magic Call [iOS], and grant it access to the necessary features such as contact, audio recording, etc.

Step2 Next, choose a contact from the list appearing on your display screen to speak to

Step3 Tap on the contact’s name, and then click on the Female Voice filter from the options that pop up.

Step4 Apply the WhatsApp voice-changer to spice up your conversation with friends and relatives on your contact.

2. Voicemod

Here is another fun-oriented software that permits you to change your voice during WhatsApp calls easily and quickly. Voicemod is a highly efficient WhatsApp voice changer popular among gamers, content creators, and more.

The app is well-customized with epic sound effects that you can select from to pimp your voice during calls. You can choose to sound like a robot, woman, man, or demon. Voicemod integrates with apps like TikTok, Elgato Stream, Audacity, Discord, Skype, and many more.

Also, Voicemod comes with voice filters. The app allows you to switch between scary, loud, or funny voices. Additionally, you have the chance to customize your vice via the Voicelab feature tucked into it. It’s a simple tool compatible with Windows, Mac, and Chromebook.

How to Use Voicemod with WhatsApp

Step1 Open your desired web browser on your PC, and navigate to the official website for Voicemod. A page as below will appear on your screen:

Click on the corresponding button to download and install a suitable version. Wait until the download is complete, and follow the on-screen instructions to configure the app. Ensure you grant permission to the necessary devices such as Microphone, etc.

Step2 Next, confirm the Voice Changer toggle at the bottom of the Window page is activated. Once that’s set, scroll through the library of voice filters, and sound effects to select your desired prank voice.

Step3 Now connect the selected Microphone to WhatsApp, host a call, and start enjoying the lovely prank voices from Voicemod.

3. Call Voice Changer [iOS]

Call Voice Changer is a simple yet powerful voice-changing app built with countless sound effects that you can use to fool your contacts during calls. The app helps you spice up your conversation with friends and families. It lets you select between funny, creepy, and loud voices.

Also, Call Voice Changer supports sound effects like birthday songs, cartoon characters, and lots more. All end-users of this app find it simple to operate. The reason is because of the clean user interface. Call Voice Changer provides you with real-time voice-changing effects- this means you have the privilege to change your voice at any time during calls.

How to Use Call Voice Changer- IntCall

Step1 On your iOS device, open the App Store, and click on the Search tab at the extreme lower right corner of your screen. Enter Call Voice Changer in the empty field provided and tap on the Enter key on your keypad.

Step2 A new screen showing the Call Voice Changer app will pop up. Here is what the app looks like:

Click on the GET button next to the app name. Validate your action when required. Launch the app after the successful download, accept the necessary conditions, and grant access if prompted.

Step3 When Call Voice Changer opens, add your cellphone number, and grant access to Microphone.

Next, select your preferred voice pitch on the next interface that pops up.

Step4 Choose your preferred sound effect from the available options, and make calls via WhatsApp.

4. Funcalls- Voice Changer & Call Recording

With over 100 voice effects, Funcalls is another wonderful WhatsApp voice-changer you can use to alter your voice during audio or video calls. The app makes it to our top list because of the quality features it holds. Funcalls is well-designed with a clean interface that lets you navigate around easily and quickly without involving a third party.

Besides voice changing, Funcalls lets you record your conversations during calls. This WhatsApp voice-changer works perfectly with mobile operating systems like Android and iOS devices. It’s a highly flexible app that permits you to change your voice using different pitches and speeds.

How to Use Funcalls- Voice Changer & Call Recorder

Step1 Depending on the mobile operating system you are using, launch the App Store, or Google PlayStore, click on the Search button and enter Funcalls in the appropriate field.

Tap on the appropriate button to install the app on your device.

Step2 Wait patiently for the installation to complete, and follow the on-screen prompts to set up the app with your Android or iOS device. Once the configuration is complete, click on the Dialer button at the bottom of the app screen. Enter a cellphone number by selecting the appropriate keys. Ensure you input the country code while dialing the number.

Step3 Now select your preferred voice effect from the options appearing on your screen.

Host the call, and download the audio recording. After the call, share the recording with friends and families for fun.

5. Prank Dial

Designed for novices and experts in the tech space, Prank Dial is another voice changer that integrates with WhatsApp. This lightweight app lets you change your voice during calls to spice up conversations with families and friends.

It’s a fun app customized with several background sound effects. From funny sounds to annoying, celebrations, scams, money, politics, and lots more. Prank Dial WhatsApp voice-changer offers quality services in free and paid subscription packages. Like the Funcalls-Voice Changer & Call Recording, Prank Dial also supports call recording.

How to Use Prank Dial with WhatsApp

Step1 Click the appropriate button on your Android or iOS device to open Google PlayStore or App Store. Enter Prank Dial in the field given to search the WhatsApp voice-changer.

Tap the corresponding button to download and install the app on your device. After the installation is over, open the app for operation.

Step2 Next, kindly grant Prank Dial access to calls, contact, and local storage. Pick a sound effect to prank your friend, and head to connect with a friend via WhatsApp.

Step3 Once the step above is complete, settle down and prank your friends. Export and share audio recordings with people on your contact list for fun.

6. Voice Changer with Effects

Here is another good WhatsApp voice-changer with top-notch sound effects that you can select from to prank your contacts. It is a high utility voice-changing app well-known for delivering all it promises. End-users have the freedom to switch a boring phone call into an interesting one by selecting a background effect.

How to Use Voice Changer with Effects with WhatsApp

Step1 Download and install Voice Changer with Effects on your smartphone. Launch the app, and grant necessary permission as required.

Step2 Next, locate the Microphone icon, and click on it. Speak to the mic, and add your desired background voice effect.

Step3 Once the step above is complete, edit the recording, and hit the Share button to send it to your contact.

You can share it via WhatsApp. To do that, select the WhatsApp icon

7. Narrator’s Voice

Lastly, Narrator’s voice is a top-rated WhatsApp voice-changing app designed with extraordinary background sound effects you can use to create a wonderful phone call experience. The app supports the text-to-speech feature. Thus, you can type, and Narrator’s Voice will convert into speech.

How to Use Narrator’s Voice with WhatsApp

Step1 Run Narrator’s Voice by clicking on the appropriate icon on your Android device.

Step2 Grant the app access to all the necessary apps and features, including the microphone. Speak to the microphone to proceed.

Step3 Edit your speech with sound effects, and click on Apply. When the editing is complete, click on Share to send to friends.

Part 2: FAQs

Q1. Can I change my voice during calls?

Yes, of course, you can!

However, you need a voice-changing app that supports real-time voice changing. You can select one from the list shared above. We mentioned seven (7) quality voice-changing apps that you can use to prank your contact during calls.

Q2. How to edit voice recordings before sharing them with friends?

Editing voice recording before sharing it with friends is straightforward if you have a voice editing tool like Wondershare Filmora. Wondershare Filmora is a world-leading video editing software with robust features that you need to edit your media files. It supports audio editing without distorting the file format.

Filmora allows you to detach audio from videos, delete, and adjust audio speeds with quality. Additionally, you can use the software to edit your videos, add transitions, effects, and more. This software works with popular computer systems like Windows and Mac. The software is simple to operate and offers quality results at a remarkably high speed. When compared with other video editing tools, Filmora stands out.

Conclusion

Now we’ve successfully explored the best 7 WhatsApp voice changers. Which do you wish to invest your funds in? While making a selection, we advise that you consider the subscription price, ease of use, and compatibility. If you want to edit your voice recordings before sharing them with friends and relatives, Filmora is the perfect tool to apply.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Also read: