How to Trim Video in QuickTime Player on Your Mac

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

You have to trim videos to capture your viewer’s attention because the average attention span of human beings is eight seconds. As such, viewers will click away or keep on scrolling if the first few seconds of your video are in complete silence or a blank screen. Luckily, there is a simple way that Mac users can use to trim videos: QuickTime Player. This guide will give you the low-down on how to trim video in Quicktime to remove unwanted portions.

In this article

01 What Is QuickTime Player?

02 How to Trim a Video in Quicktime Player

03 Tips & Tricks to Use QuickTime Player

What Is QuickTime Player?

Developed by Apple, QuickTime Player is a software application designed to play, edit, record, and share video and audio files on your Mac. It was created in 1991, and QuickTime X is the latest Mac version available for users of Mac OS X Snow Leopard to macOS Mojave.

QuickTime Player is supported by MovieWorks, PowerPoint, HyperCard, Director, and other standard multimedia authoring apps. One of the exciting features that QuickTime brings to the internet is that it enables video streaming over networks.

In 2016, Apple ended support for the QuickTime Windows version. In 12018, they ceased support for QuickTime 7 version on macOS.

When it comes to OS X Lion, QTKit (the underlying QuickTime media) was deplored in favor of AVFoundation, which was the newer graphics framework and discontinued as of macOS Catalina.

How to Trim a Video in Quicktime Player

Trimming video is a breeze when you are using QuickTime. Follow the steps below to learn how to trim Quicktime video clips.

1. Launch QuickTime Player on your Mac. You can find this application by using a Spotlight search. Alternatively, open the Finder app in your Dock and choose the Applications option from the left-hand side menu. You’ll then find QuickTime in the right-hand side menu.
2. Once QuickTime has launched, hit the File tab, then click Open File.

1. Select the video you would to trim.
2. Navigate to the Edit tab on the top menu with your video open.
3. Select Trim in the dropdown menu. Alternatively, use the keyboard shortcut command + T.

1. You’ll see a yellow trimming bar around the length of the video at the bottom.

1. To QuickTime trim video, drag the handles, and the app will remove everything outside the yellow bars.
2. Once you have trimmed your video, click the Trim option on the right side of your screen.
3. The play icon allows you to preview your video anytime you want during the editing process.
4. Click File then Save to save your trimmed video.

1. Name your trimmed video, and then select the location you want to save it. Click Save to complete this action.

Tips & Tricks to Use QuickTime Player

Now that you know how to QuickTime trim video, we have provided some helpful tips and tricks for those using this application.

How to Split and Combine Videos

QuickTime player allows you to split and combine two or more video clips. Follow the steps below to learn how to split and combine your videos.

1. Open your file.
2. Then, press Command-E or select View > Show Clips.
3. Drag the Playhead to the area where you would like the video to split.
4. Press Command-Y or select Edit > Split Clip. Both clips will be highlighted yellow.
5. You can now insert another video clip or re-arrange the video clips by dragging them to the right or left.
6. If you split the video clips thrice, you can select the one in the middle, where a yellow outline will appear around it, and then zap it by hitting Delete on your keyboard.

1. To combine your video clips, open one of the clips and select Edit > Add Clip to End.
2. Double click the video clip you would like to tack on in the Open dialog box.
3. You can also drag the icons of video clips from the Finder and drop them into a video window. The application will add the clips to the end of your existing video. Repeat this process to combine several video clips.
4. The second video can appear in the middle of your first one. All you have to do is split the video clip, then click on the clip that will appear before the area where the new video is supposed to go.
5. Now, select Edit > Insert Clip After Selection.
6. A dialog box will appear; double-click the video file you would like to bring in.
7. Alternatively, drag a video from the Finder and take it into the gap between the two clips.

How to Record Audio and Videos

You can record a video using a USB webcam or Mac’s built-in camera. What’s more? You can record audio with the built-in microphone on your Mac, a musical instrument connected via a USB cable, or an external mic. Or maybe you would like to record something that’s happening on your screen, QuickTime Player can also do this. Follow the steps below to record audio and video with QuickTime.

1. Select File > New Screen Recording, New Audio Recording, or New Movie Recording.
2. The last two options need you to choose quality and an input source. You’ll then have to hit the red Record Button. The first option will summon a pane that features the record button and some audio options.
3. Drag to specify an area you want to record or click once to record the whole screen.
4. Once you have finished, hit the Record button again. A black screen will appear in your menu bar when you’re recording your screen.
5. The file will open in QuickTime Player when you stop recording.
6. To save it, choose File > Save.

How to Export and Share Videos

QuickTime allows you to export optimized content so that you can view it on other Apple devices, including Apple TV, iPod Touch, and iPhone. With that in mind, let’s look at how you can export and share your video once you have finished editing it.

1. Select File > Export; you’ll get a roundup of resolution options (1080p, 720p, and 480p), settings for Apple TV and iOS devices, and an option for only exporting audio.
2. If you go with the iTunes option, you’ll see the same Apple TV and iOS devices optimized settings; however, the video file will be sent to your iTunes library.

1. • To export your video and share with other users, select File > Share, and the resulting menu will include AirDrop, Messages, Mail, and the social media sharing platforms YouTube, Flickr, Facebook, and Vimeo.

1. Choose the option you want, and QuickTime will optimize your video for the service or program you have selected.
2. To save the changes you have made to your video file, select File > Close. Name your edited video in the box that will appear, then click Save.

Flip or Rotate a Clip

QuickTime Player also allows you to rotate or flip clips and videos with a single click. Following these step to flip or rotate your video clip.

• Navigate to the Edit tab.
• Select the direction that you want your video to turn. The available options are Flip Vertical, Flip Horizontal, Rotate Right and Rotate Left.

You can apply the changes to your entire video or one of the clips if you had divided the video file.

Present or Record your iPad or iPhone Screen

QuickTime can record or show a live view of what is happening on your iPhone or iPad. If you are using Mac for a presentation, you can show the screen of your iOS devices centered within your Mac’s screen. You only need to follow the steps below:

• Use a USB cable to attach either your iPad or iPhone to your Mac.
• Open QuickTime, then click File > New Movie Recording.
• Now, you need to point the cursor at the QuickTime Player window for the record button to appear.
• Go to the menu next to the record button and pick your iOS device from the list of cameras.
• You’re now ready to enjoy the largest version of your iPhone or iPad with your audience.
• Click Record to record the action.

Conclusion

● Video editing is an essential part of creating video content that attracts viewers. QuickTime trim video allows you to remove unwanted scenes to make it engaging. Your viewers will get hooked on your videos if you trim boring sections, blank screens, and areas with silence. Once you master the art of cutting, your viewer retention and engagement will sky-rocket.

● Don’t forget to use the tips and tricks we have provided to get the most out of this application. You can export videos to various formats, such as FLC animations and image sequences, as well as AVI and DV Streams. You can also split and combine videos, present or record your iOS device screen, record audio and video, and much more.

Try It Free Try It Free

You have to trim videos to capture your viewer’s attention because the average attention span of human beings is eight seconds. As such, viewers will click away or keep on scrolling if the first few seconds of your video are in complete silence or a blank screen. Luckily, there is a simple way that Mac users can use to trim videos: QuickTime Player. This guide will give you the low-down on how to trim video in Quicktime to remove unwanted portions.

In this article

01 What Is QuickTime Player?

02 How to Trim a Video in Quicktime Player

03 Tips & Tricks to Use QuickTime Player

What Is QuickTime Player?

Developed by Apple, QuickTime Player is a software application designed to play, edit, record, and share video and audio files on your Mac. It was created in 1991, and QuickTime X is the latest Mac version available for users of Mac OS X Snow Leopard to macOS Mojave.

QuickTime Player is supported by MovieWorks, PowerPoint, HyperCard, Director, and other standard multimedia authoring apps. One of the exciting features that QuickTime brings to the internet is that it enables video streaming over networks.

In 2016, Apple ended support for the QuickTime Windows version. In 12018, they ceased support for QuickTime 7 version on macOS.

When it comes to OS X Lion, QTKit (the underlying QuickTime media) was deplored in favor of AVFoundation, which was the newer graphics framework and discontinued as of macOS Catalina.

How to Trim a Video in Quicktime Player

Trimming video is a breeze when you are using QuickTime. Follow the steps below to learn how to trim Quicktime video clips.

1. Launch QuickTime Player on your Mac. You can find this application by using a Spotlight search. Alternatively, open the Finder app in your Dock and choose the Applications option from the left-hand side menu. You’ll then find QuickTime in the right-hand side menu.
2. Once QuickTime has launched, hit the File tab, then click Open File.

1. Select the video you would to trim.
2. Navigate to the Edit tab on the top menu with your video open.
3. Select Trim in the dropdown menu. Alternatively, use the keyboard shortcut command + T.

1. You’ll see a yellow trimming bar around the length of the video at the bottom.

1. To QuickTime trim video, drag the handles, and the app will remove everything outside the yellow bars.
2. Once you have trimmed your video, click the Trim option on the right side of your screen.
3. The play icon allows you to preview your video anytime you want during the editing process.
4. Click File then Save to save your trimmed video.

1. Name your trimmed video, and then select the location you want to save it. Click Save to complete this action.

Tips & Tricks to Use QuickTime Player

Now that you know how to QuickTime trim video, we have provided some helpful tips and tricks for those using this application.

How to Split and Combine Videos

QuickTime player allows you to split and combine two or more video clips. Follow the steps below to learn how to split and combine your videos.

1. Open your file.
2. Then, press Command-E or select View > Show Clips.
3. Drag the Playhead to the area where you would like the video to split.
4. Press Command-Y or select Edit > Split Clip. Both clips will be highlighted yellow.
5. You can now insert another video clip or re-arrange the video clips by dragging them to the right or left.
6. If you split the video clips thrice, you can select the one in the middle, where a yellow outline will appear around it, and then zap it by hitting Delete on your keyboard.

1. To combine your video clips, open one of the clips and select Edit > Add Clip to End.
2. Double click the video clip you would like to tack on in the Open dialog box.
3. You can also drag the icons of video clips from the Finder and drop them into a video window. The application will add the clips to the end of your existing video. Repeat this process to combine several video clips.
4. The second video can appear in the middle of your first one. All you have to do is split the video clip, then click on the clip that will appear before the area where the new video is supposed to go.
5. Now, select Edit > Insert Clip After Selection.
6. A dialog box will appear; double-click the video file you would like to bring in.
7. Alternatively, drag a video from the Finder and take it into the gap between the two clips.

How to Record Audio and Videos

You can record a video using a USB webcam or Mac’s built-in camera. What’s more? You can record audio with the built-in microphone on your Mac, a musical instrument connected via a USB cable, or an external mic. Or maybe you would like to record something that’s happening on your screen, QuickTime Player can also do this. Follow the steps below to record audio and video with QuickTime.

1. Select File > New Screen Recording, New Audio Recording, or New Movie Recording.
2. The last two options need you to choose quality and an input source. You’ll then have to hit the red Record Button. The first option will summon a pane that features the record button and some audio options.
3. Drag to specify an area you want to record or click once to record the whole screen.
4. Once you have finished, hit the Record button again. A black screen will appear in your menu bar when you’re recording your screen.
5. The file will open in QuickTime Player when you stop recording.
6. To save it, choose File > Save.

How to Export and Share Videos

QuickTime allows you to export optimized content so that you can view it on other Apple devices, including Apple TV, iPod Touch, and iPhone. With that in mind, let’s look at how you can export and share your video once you have finished editing it.

1. Select File > Export; you’ll get a roundup of resolution options (1080p, 720p, and 480p), settings for Apple TV and iOS devices, and an option for only exporting audio.
2. If you go with the iTunes option, you’ll see the same Apple TV and iOS devices optimized settings; however, the video file will be sent to your iTunes library.

1. • To export your video and share with other users, select File > Share, and the resulting menu will include AirDrop, Messages, Mail, and the social media sharing platforms YouTube, Flickr, Facebook, and Vimeo.

1. Choose the option you want, and QuickTime will optimize your video for the service or program you have selected.
2. To save the changes you have made to your video file, select File > Close. Name your edited video in the box that will appear, then click Save.

Flip or Rotate a Clip

QuickTime Player also allows you to rotate or flip clips and videos with a single click. Following these step to flip or rotate your video clip.

• Navigate to the Edit tab.
• Select the direction that you want your video to turn. The available options are Flip Vertical, Flip Horizontal, Rotate Right and Rotate Left.

You can apply the changes to your entire video or one of the clips if you had divided the video file.

Present or Record your iPad or iPhone Screen

QuickTime can record or show a live view of what is happening on your iPhone or iPad. If you are using Mac for a presentation, you can show the screen of your iOS devices centered within your Mac’s screen. You only need to follow the steps below:

• Use a USB cable to attach either your iPad or iPhone to your Mac.
• Open QuickTime, then click File > New Movie Recording.
• Now, you need to point the cursor at the QuickTime Player window for the record button to appear.
• Go to the menu next to the record button and pick your iOS device from the list of cameras.
• You’re now ready to enjoy the largest version of your iPhone or iPad with your audience.
• Click Record to record the action.

Conclusion

● Video editing is an essential part of creating video content that attracts viewers. QuickTime trim video allows you to remove unwanted scenes to make it engaging. Your viewers will get hooked on your videos if you trim boring sections, blank screens, and areas with silence. Once you master the art of cutting, your viewer retention and engagement will sky-rocket.

● Don’t forget to use the tips and tricks we have provided to get the most out of this application. You can export videos to various formats, such as FLC animations and image sequences, as well as AVI and DV Streams. You can also split and combine videos, present or record your iOS device screen, record audio and video, and much more.

Try It Free Try It Free

You have to trim videos to capture your viewer’s attention because the average attention span of human beings is eight seconds. As such, viewers will click away or keep on scrolling if the first few seconds of your video are in complete silence or a blank screen. Luckily, there is a simple way that Mac users can use to trim videos: QuickTime Player. This guide will give you the low-down on how to trim video in Quicktime to remove unwanted portions.

In this article

01 What Is QuickTime Player?

02 How to Trim a Video in Quicktime Player

03 Tips & Tricks to Use QuickTime Player

What Is QuickTime Player?

Developed by Apple, QuickTime Player is a software application designed to play, edit, record, and share video and audio files on your Mac. It was created in 1991, and QuickTime X is the latest Mac version available for users of Mac OS X Snow Leopard to macOS Mojave.

QuickTime Player is supported by MovieWorks, PowerPoint, HyperCard, Director, and other standard multimedia authoring apps. One of the exciting features that QuickTime brings to the internet is that it enables video streaming over networks.

In 2016, Apple ended support for the QuickTime Windows version. In 12018, they ceased support for QuickTime 7 version on macOS.

When it comes to OS X Lion, QTKit (the underlying QuickTime media) was deplored in favor of AVFoundation, which was the newer graphics framework and discontinued as of macOS Catalina.

How to Trim a Video in Quicktime Player

Trimming video is a breeze when you are using QuickTime. Follow the steps below to learn how to trim Quicktime video clips.

1. Launch QuickTime Player on your Mac. You can find this application by using a Spotlight search. Alternatively, open the Finder app in your Dock and choose the Applications option from the left-hand side menu. You’ll then find QuickTime in the right-hand side menu.
2. Once QuickTime has launched, hit the File tab, then click Open File.

1. Select the video you would to trim.
2. Navigate to the Edit tab on the top menu with your video open.
3. Select Trim in the dropdown menu. Alternatively, use the keyboard shortcut command + T.

1. You’ll see a yellow trimming bar around the length of the video at the bottom.

1. To QuickTime trim video, drag the handles, and the app will remove everything outside the yellow bars.
2. Once you have trimmed your video, click the Trim option on the right side of your screen.
3. The play icon allows you to preview your video anytime you want during the editing process.
4. Click File then Save to save your trimmed video.

1. Name your trimmed video, and then select the location you want to save it. Click Save to complete this action.

Tips & Tricks to Use QuickTime Player

Now that you know how to QuickTime trim video, we have provided some helpful tips and tricks for those using this application.

How to Split and Combine Videos

QuickTime player allows you to split and combine two or more video clips. Follow the steps below to learn how to split and combine your videos.

1. Open your file.
2. Then, press Command-E or select View > Show Clips.
3. Drag the Playhead to the area where you would like the video to split.
4. Press Command-Y or select Edit > Split Clip. Both clips will be highlighted yellow.
5. You can now insert another video clip or re-arrange the video clips by dragging them to the right or left.
6. If you split the video clips thrice, you can select the one in the middle, where a yellow outline will appear around it, and then zap it by hitting Delete on your keyboard.

1. To combine your video clips, open one of the clips and select Edit > Add Clip to End.
2. Double click the video clip you would like to tack on in the Open dialog box.
3. You can also drag the icons of video clips from the Finder and drop them into a video window. The application will add the clips to the end of your existing video. Repeat this process to combine several video clips.
4. The second video can appear in the middle of your first one. All you have to do is split the video clip, then click on the clip that will appear before the area where the new video is supposed to go.
5. Now, select Edit > Insert Clip After Selection.
6. A dialog box will appear; double-click the video file you would like to bring in.
7. Alternatively, drag a video from the Finder and take it into the gap between the two clips.

How to Record Audio and Videos

You can record a video using a USB webcam or Mac’s built-in camera. What’s more? You can record audio with the built-in microphone on your Mac, a musical instrument connected via a USB cable, or an external mic. Or maybe you would like to record something that’s happening on your screen, QuickTime Player can also do this. Follow the steps below to record audio and video with QuickTime.

1. Select File > New Screen Recording, New Audio Recording, or New Movie Recording.
2. The last two options need you to choose quality and an input source. You’ll then have to hit the red Record Button. The first option will summon a pane that features the record button and some audio options.
3. Drag to specify an area you want to record or click once to record the whole screen.
4. Once you have finished, hit the Record button again. A black screen will appear in your menu bar when you’re recording your screen.
5. The file will open in QuickTime Player when you stop recording.
6. To save it, choose File > Save.

How to Export and Share Videos

QuickTime allows you to export optimized content so that you can view it on other Apple devices, including Apple TV, iPod Touch, and iPhone. With that in mind, let’s look at how you can export and share your video once you have finished editing it.

1. Select File > Export; you’ll get a roundup of resolution options (1080p, 720p, and 480p), settings for Apple TV and iOS devices, and an option for only exporting audio.
2. If you go with the iTunes option, you’ll see the same Apple TV and iOS devices optimized settings; however, the video file will be sent to your iTunes library.

1. • To export your video and share with other users, select File > Share, and the resulting menu will include AirDrop, Messages, Mail, and the social media sharing platforms YouTube, Flickr, Facebook, and Vimeo.

1. Choose the option you want, and QuickTime will optimize your video for the service or program you have selected.
2. To save the changes you have made to your video file, select File > Close. Name your edited video in the box that will appear, then click Save.

Flip or Rotate a Clip

QuickTime Player also allows you to rotate or flip clips and videos with a single click. Following these step to flip or rotate your video clip.

• Navigate to the Edit tab.
• Select the direction that you want your video to turn. The available options are Flip Vertical, Flip Horizontal, Rotate Right and Rotate Left.

You can apply the changes to your entire video or one of the clips if you had divided the video file.

Present or Record your iPad or iPhone Screen

QuickTime can record or show a live view of what is happening on your iPhone or iPad. If you are using Mac for a presentation, you can show the screen of your iOS devices centered within your Mac’s screen. You only need to follow the steps below:

• Use a USB cable to attach either your iPad or iPhone to your Mac.
• Open QuickTime, then click File > New Movie Recording.
• Now, you need to point the cursor at the QuickTime Player window for the record button to appear.
• Go to the menu next to the record button and pick your iOS device from the list of cameras.
• You’re now ready to enjoy the largest version of your iPhone or iPad with your audience.
• Click Record to record the action.

Conclusion

● Video editing is an essential part of creating video content that attracts viewers. QuickTime trim video allows you to remove unwanted scenes to make it engaging. Your viewers will get hooked on your videos if you trim boring sections, blank screens, and areas with silence. Once you master the art of cutting, your viewer retention and engagement will sky-rocket.

● Don’t forget to use the tips and tricks we have provided to get the most out of this application. You can export videos to various formats, such as FLC animations and image sequences, as well as AVI and DV Streams. You can also split and combine videos, present or record your iOS device screen, record audio and video, and much more.

Try It Free Try It Free

You have to trim videos to capture your viewer’s attention because the average attention span of human beings is eight seconds. As such, viewers will click away or keep on scrolling if the first few seconds of your video are in complete silence or a blank screen. Luckily, there is a simple way that Mac users can use to trim videos: QuickTime Player. This guide will give you the low-down on how to trim video in Quicktime to remove unwanted portions.

In this article

01 What Is QuickTime Player?

02 How to Trim a Video in Quicktime Player

03 Tips & Tricks to Use QuickTime Player

What Is QuickTime Player?

Developed by Apple, QuickTime Player is a software application designed to play, edit, record, and share video and audio files on your Mac. It was created in 1991, and QuickTime X is the latest Mac version available for users of Mac OS X Snow Leopard to macOS Mojave.

QuickTime Player is supported by MovieWorks, PowerPoint, HyperCard, Director, and other standard multimedia authoring apps. One of the exciting features that QuickTime brings to the internet is that it enables video streaming over networks.

In 2016, Apple ended support for the QuickTime Windows version. In 12018, they ceased support for QuickTime 7 version on macOS.

When it comes to OS X Lion, QTKit (the underlying QuickTime media) was deplored in favor of AVFoundation, which was the newer graphics framework and discontinued as of macOS Catalina.

How to Trim a Video in Quicktime Player

Trimming video is a breeze when you are using QuickTime. Follow the steps below to learn how to trim Quicktime video clips.

1. Launch QuickTime Player on your Mac. You can find this application by using a Spotlight search. Alternatively, open the Finder app in your Dock and choose the Applications option from the left-hand side menu. You’ll then find QuickTime in the right-hand side menu.
2. Once QuickTime has launched, hit the File tab, then click Open File.

1. Select the video you would to trim.
2. Navigate to the Edit tab on the top menu with your video open.
3. Select Trim in the dropdown menu. Alternatively, use the keyboard shortcut command + T.

1. You’ll see a yellow trimming bar around the length of the video at the bottom.

1. To QuickTime trim video, drag the handles, and the app will remove everything outside the yellow bars.
2. Once you have trimmed your video, click the Trim option on the right side of your screen.
3. The play icon allows you to preview your video anytime you want during the editing process.
4. Click File then Save to save your trimmed video.

1. Name your trimmed video, and then select the location you want to save it. Click Save to complete this action.

Tips & Tricks to Use QuickTime Player

Now that you know how to QuickTime trim video, we have provided some helpful tips and tricks for those using this application.

How to Split and Combine Videos

QuickTime player allows you to split and combine two or more video clips. Follow the steps below to learn how to split and combine your videos.

1. Open your file.
2. Then, press Command-E or select View > Show Clips.
3. Drag the Playhead to the area where you would like the video to split.
4. Press Command-Y or select Edit > Split Clip. Both clips will be highlighted yellow.
5. You can now insert another video clip or re-arrange the video clips by dragging them to the right or left.
6. If you split the video clips thrice, you can select the one in the middle, where a yellow outline will appear around it, and then zap it by hitting Delete on your keyboard.

1. To combine your video clips, open one of the clips and select Edit > Add Clip to End.
2. Double click the video clip you would like to tack on in the Open dialog box.
3. You can also drag the icons of video clips from the Finder and drop them into a video window. The application will add the clips to the end of your existing video. Repeat this process to combine several video clips.
4. The second video can appear in the middle of your first one. All you have to do is split the video clip, then click on the clip that will appear before the area where the new video is supposed to go.
5. Now, select Edit > Insert Clip After Selection.
6. A dialog box will appear; double-click the video file you would like to bring in.
7. Alternatively, drag a video from the Finder and take it into the gap between the two clips.

How to Record Audio and Videos

You can record a video using a USB webcam or Mac’s built-in camera. What’s more? You can record audio with the built-in microphone on your Mac, a musical instrument connected via a USB cable, or an external mic. Or maybe you would like to record something that’s happening on your screen, QuickTime Player can also do this. Follow the steps below to record audio and video with QuickTime.

1. Select File > New Screen Recording, New Audio Recording, or New Movie Recording.
2. The last two options need you to choose quality and an input source. You’ll then have to hit the red Record Button. The first option will summon a pane that features the record button and some audio options.
3. Drag to specify an area you want to record or click once to record the whole screen.
4. Once you have finished, hit the Record button again. A black screen will appear in your menu bar when you’re recording your screen.
5. The file will open in QuickTime Player when you stop recording.
6. To save it, choose File > Save.

How to Export and Share Videos

QuickTime allows you to export optimized content so that you can view it on other Apple devices, including Apple TV, iPod Touch, and iPhone. With that in mind, let’s look at how you can export and share your video once you have finished editing it.

1. Select File > Export; you’ll get a roundup of resolution options (1080p, 720p, and 480p), settings for Apple TV and iOS devices, and an option for only exporting audio.
2. If you go with the iTunes option, you’ll see the same Apple TV and iOS devices optimized settings; however, the video file will be sent to your iTunes library.

1. • To export your video and share with other users, select File > Share, and the resulting menu will include AirDrop, Messages, Mail, and the social media sharing platforms YouTube, Flickr, Facebook, and Vimeo.

1. Choose the option you want, and QuickTime will optimize your video for the service or program you have selected.
2. To save the changes you have made to your video file, select File > Close. Name your edited video in the box that will appear, then click Save.

Flip or Rotate a Clip

QuickTime Player also allows you to rotate or flip clips and videos with a single click. Following these step to flip or rotate your video clip.

• Navigate to the Edit tab.
• Select the direction that you want your video to turn. The available options are Flip Vertical, Flip Horizontal, Rotate Right and Rotate Left.

You can apply the changes to your entire video or one of the clips if you had divided the video file.

Present or Record your iPad or iPhone Screen

QuickTime can record or show a live view of what is happening on your iPhone or iPad. If you are using Mac for a presentation, you can show the screen of your iOS devices centered within your Mac’s screen. You only need to follow the steps below:

• Use a USB cable to attach either your iPad or iPhone to your Mac.
• Open QuickTime, then click File > New Movie Recording.
• Now, you need to point the cursor at the QuickTime Player window for the record button to appear.
• Go to the menu next to the record button and pick your iOS device from the list of cameras.
• You’re now ready to enjoy the largest version of your iPhone or iPad with your audience.
• Click Record to record the action.

Conclusion

● Video editing is an essential part of creating video content that attracts viewers. QuickTime trim video allows you to remove unwanted scenes to make it engaging. Your viewers will get hooked on your videos if you trim boring sections, blank screens, and areas with silence. Once you master the art of cutting, your viewer retention and engagement will sky-rocket.

● Don’t forget to use the tips and tricks we have provided to get the most out of this application. You can export videos to various formats, such as FLC animations and image sequences, as well as AVI and DV Streams. You can also split and combine videos, present or record your iOS device screen, record audio and video, and much more.

How to Make Glitch Effect with Filmora

You don’t need outdated VCRs or any other broken technology to produce glitch effects. Instead, you can use a video editing program for Mac and PCs, such as Filmora , to transform your videos into glitch-effect masterpieces. You can also use the glitch effects to provide striking shot transitions or opening titles. Keep reading this article on how to apply various glitch video effects in Filmora 11:

Part 1: What is a Glitch Effect?

A glitch effect occurs when a section of your video temporarily changes look or “glitches” for a short while. Although transient glitches are typical, they can occasionally linger for a few seconds or more.

You can use a glitch effect to temporarily change the appearance of the image in the video to give the impression that a machine is processing it. Additionally, it gives your finished piece a fantastic, dreamlike aspect.

Part 2: When Should you Apply a Glitch Effect?

A few years back, we had no choice but to watch glitchy movies on rusty VCR devices. Nowadays, retro video effects are very popular in TV movies and even games. You can use these effects in many ways, like making fake vintage footage or emulating a glitching computer.

Filmmakers frequently employ glitching in their videos to give the impression that a character has been affected by a technical abnormality, is having a flashback, or is being watched by someone else via a digital camera system. Something happens when the person or image flashes, often without their knowledge. In addition, you can apply the glitch effect to a composition to evoke a feeling of dramatic irony.

Part 3: Tutorial to Chromatic Aberration Effect

Chromatic aberration refers to how old lenses tend to split colors. This effect is very common in Old media like VHS or LaserDisc.

Here is a complete breakdown of each component of the Retro look and how you can make your glitch effects in Filmora 11:

Step1 Download Wondersshare Filmora 11 on your Pc by visiting filmora.wondershare.com.

Step2 Open Filmora and click on the Effects tab.

Step3 Search Chromatic aberration and drag the effect right onto your clip. It will give you a fantastic pre-made version of the effect.

Part 4: How to Customize Glitch Effect with Filmora

You can add final touches to your video clips by customizing Filmora’s effects to take your glitch effect to the next level. You can mix and match different effects in your video to create your custom glitch effect in Filmora 11.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Once you have your clip on the timeline, select your clip and click on Edit. Now choose Duplicate to create two more copies.

Step2 Put the new copies on the layer above the others and make sure everything is lined up exactly. To create the glitch effect, separate the color channels on your Clips into the primary colors red, green, and blue.

Step3 Double-click on the top clip.

Go to Color and open the White Balance option to make this layer completely red. Next, drag both Temperature and Tint sliders to a hundred.

Step4 Now click the little eye icon on the timeline to hide the top layer and move on to the middle layer.

Step5 Double-click on your middle clip and go to Color, then select White Balance and set your Temperature to -100 and your Tint to 100.

Step6 Finally, hide this layer just like before. Repeat the same steps for the last clip but make this clip the blue layer by leaving the Temperature at zero and setting the Tint to -100.

Step7 Double-click the clip in the top layer, click the Video Tab, and open the Compositing options. Set the Blending Mode of this top layer to Soft Light.

Now click on the clip in your preview window and move the image over by pressing the left Arrow key on your keyboard a few times. Once you’re happy with the top clip, hide that layer by clicking the eye icon.

Step8 To make the middle layer visible, double-click the clip in your mid layer and set the Blending Mode of this layer to Screen.

Now click on your clip in the preview window and press the Right key as many times as you did before. Finally, make all the layers visible by clicking the eye icon.

Vignette

A vignette is a dark border that fades around the frame’s edges in Filmora. You can easily add a vignette effect to your video by using these steps:

Step1 First, click the Effects Tab and type in Vignette.

Step2 Next, drag the Vignette Radius effect to a layer above your previous three layers.

Step3 Now adjust the length to match the other clips.

VHS static effects

A VHS effect is a grainy distortion that resembles an old analog video cassette recording. To apply the VHS static effects:

Step1 Click the Effects tab.

Step2 Search for the VHS static and drag it to a new layer above everything else.

Step3 Extend one of the effects to match the length of your previous clips.

VCR Distortion

VCR Distortion effect will make your video look highly glitched. To apply this effect:

Step1 Click on the Effects tab.

Step2 Search for VCR Distortion, then drag and drop this effect over your previous layer.

Part 5: Tips to Create Awesome Glitch Effects

1. One of the best ways to use the VCR Distortion effect is to cut it short and intersperse it around your video in random parts.
2. The glitch Distortion effect is very intense, so we recommend cutting this effect very short and dropping it at random parts of your video.
3. You can also use these effects as a sneaky way to hide Cuts in your video.

Summary

You can use glitch effects created or inspired by faulty video equipment as a powerful storytelling tool. These effects can help you change the tone of the entire video by adding a specific visual aesthetic and making the narrative simpler to convey and more approachable for the audience.

We recommend using Filmora 11 for adding built-in glitch effects. You can also use this app to create custom glitch effects within a few minutes.

Free Download For macOS 10.14 or later

Step1 Once you have your clip on the timeline, select your clip and click on Edit. Now choose Duplicate to create two more copies.

Step2 Put the new copies on the layer above the others and make sure everything is lined up exactly. To create the glitch effect, separate the color channels on your Clips into the primary colors red, green, and blue.

Step3 Double-click on the top clip.

Go to Color and open the White Balance option to make this layer completely red. Next, drag both Temperature and Tint sliders to a hundred.

Step4 Now click the little eye icon on the timeline to hide the top layer and move on to the middle layer.

Step5 Double-click on your middle clip and go to Color, then select White Balance and set your Temperature to -100 and your Tint to 100.

Step6 Finally, hide this layer just like before. Repeat the same steps for the last clip but make this clip the blue layer by leaving the Temperature at zero and setting the Tint to -100.

Step7 Double-click the clip in the top layer, click the Video Tab, and open the Compositing options. Set the Blending Mode of this top layer to Soft Light.

Now click on the clip in your preview window and move the image over by pressing the left Arrow key on your keyboard a few times. Once you’re happy with the top clip, hide that layer by clicking the eye icon.

Step8 To make the middle layer visible, double-click the clip in your mid layer and set the Blending Mode of this layer to Screen.

Now click on your clip in the preview window and press the Right key as many times as you did before. Finally, make all the layers visible by clicking the eye icon.

Vignette

A vignette is a dark border that fades around the frame’s edges in Filmora. You can easily add a vignette effect to your video by using these steps:

Step1 First, click the Effects Tab and type in Vignette.

Step2 Next, drag the Vignette Radius effect to a layer above your previous three layers.

Step3 Now adjust the length to match the other clips.

VHS static effects

A VHS effect is a grainy distortion that resembles an old analog video cassette recording. To apply the VHS static effects:

Step1 Click the Effects tab.

Step2 Search for the VHS static and drag it to a new layer above everything else.

Step3 Extend one of the effects to match the length of your previous clips.

VCR Distortion

VCR Distortion effect will make your video look highly glitched. To apply this effect:

Step1 Click on the Effects tab.

Step2 Search for VCR Distortion, then drag and drop this effect over your previous layer.

Part 5: Tips to Create Awesome Glitch Effects

1. One of the best ways to use the VCR Distortion effect is to cut it short and intersperse it around your video in random parts.
2. The glitch Distortion effect is very intense, so we recommend cutting this effect very short and dropping it at random parts of your video.
3. You can also use these effects as a sneaky way to hide Cuts in your video.

Summary

You can use glitch effects created or inspired by faulty video equipment as a powerful storytelling tool. These effects can help you change the tone of the entire video by adding a specific visual aesthetic and making the narrative simpler to convey and more approachable for the audience.

We recommend using Filmora 11 for adding built-in glitch effects. You can also use this app to create custom glitch effects within a few minutes.

Repeated Text Animation Tutorial in Filmora

Preparation

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download Filmora . Let it install and wait for it to run. Then, click on “New Project”. Now, you’re ready to edit!

Step 2

First, go to Titles and drag the Default Title to the Timeline.

Step 3

Now, double-click on the Default Title clip. Here, change its font to any bold font. Increase the text size to 120. Type in your text in the box. Scroll a bit down and change the Text Spacing to 8. Click OK.

Step 4

Take a Snapshot of this Default Title.

Step 5

Double-click on the Default Title clip once again. This time, click on its Advanced settings. Here, turn OFF Text Fill → turn ON Outline → change the Outline color to White → reduce Thickness to 1. Click OK. Now, take another Snapshot.

Step 6

Delete the Default Title clip from the Timeline. Now, drag the Outline snapshot that we just created to the Timeline. Open the Crop tool → change the Ratio to Custom → replace “1080” with “540”. Lastly, move the highlighted crop section to the top. Click OK.

Step 7

Double-click on the Snapshot to open its settings panel. Go to the Animation tab. Here, change the value of the Y-axis to “275”**.** Click OK. Now, take a Snapshot.

Step 8

Next, click on the Crop tool again and simply move the highlighted crop section to the bottom part of the screen. Click OK. Then, double-click on the snapshot clip in the Timeline and change the value of the Y-axis from “275” to “-275”**.** Click OK. Take a Snapshot again.

Step 9

Import a background image to My Media. Drag the background image to the Timeline. Double-click on it and drag the Scale bar until the background image covers the whole screen. Click OK. You should cut the background clip to make it 3 seconds long as well.

Step 10

Lock this track in the Timeline by pressing the highlighted button on the left. Then, go to “Track Manager” and add 6 new Tracks to the Timeline. Click OK.

Step 11

Drag the first Snapshot we made before to Track 6. Cut it so it’s 3 seconds long. Then, Lock the Track.

Step 12

Set the Playhead at the 15th frame on the Timeline. Then, drag the Upward Outline snapshot to this point. Double-click on it and change the Y-axis value to “**-4%**”. Then, reduce the Opacity to 0%. Now, move the Playhead 5 frames further. Next, increase the Opacity to 100% and increase the Y-axis value to around “105”. Don’t click OK yet.

Step 13

Move the Playhead to 1 minute and 5 seconds on the Timeline. Add a keyframe by clicking on the “+Add” button. Then, move the Playhead 5 frames forward. Here, change the Zoom Level to 25%.

Step 14

Double-click on the clip in Track 5. Drag the text like in the image below. Then, delete the part of the clip on the right side after 1 minute and 15 seconds.

Step 15

Hide the clips on Track 6 and Track 1 by clicking the “eye” icons next to them. Then, take a Snapshot. Now, drag this Snapshot right next to the clip on Track 5.

Step 16

Move the Playhead 3 frames forward from the starting point of the clip you just added. Unhide Track 6. Double-click on the clip on the right side of Track 5 and click on “+Add”. Move the Playhead 5 seconds forward and adjust the Upward Outline to fit the text.

Step 17

Move the Playhead 5 frames forward again. Drag the Y-axis value to the left until the outline clip overlaps the main text. Then, reduce the Opacity to 0%. Move the Playhead to 2 minutes and 10 seconds. Cut the Track and delete the clip on the right side. Lastly, Lock Track 5.

Step 18

Drag the Downward Outline snapshot to Track 4. Then, repeat the same process as in Step 16 and Step 17.

Step 19

Drag the Upward Outline snapshot to Track 3 at the 17th frame. Double-click on it and change the Opacity to 0%.

Step 20

Now, move 5 frames forward and increase the Opacity back to 100%. Then, drag the Y-axis value to the right until the screen looks like this.

Step 21

Move the Playhead to 1 minute and 5 seconds. Click on “+Add” to add a keyframe. Then, move the Playhead 5 frames forward. Double-click on the clip and stretch it from side to side to match something like this.

Step 22

Move the Playhead to 1 minute and 16 seconds. Split the clip and delete the part on the right side. Hide Track 4, 5, and 6. Then, take a Snapshot. Drag this Snapshot next to the clip on Track 3. Place the Playhead on 1 minute and 18 seconds. Then, unhide Track 4, 5, and 6.

Step 23

Double-click on the clip on the right side of Track 3. Add a keyframe by pressing “+Add”. Move the Playhead to 1 minute and 23 seconds. Now, resize the clip back to its original size by moving the rectangle left and right. Right now, it should look like this.

Step 24

Move the Playhead 5 frames forward. Drag the Y-axis value to the left until the screen looks like this.

Step 25

Move the Playhead 5 frames forward again. Drag the value of the Y-axis to the left until the screen looks like this. Then, change the Opacity to 0%. Finally, split the clip at 2 minutes and 10 seconds. Delete the part on the right side. Lock Track 3.

Step 26

Next, drag the Downward Snapshot on Track 2 and follow the same process as in Steps 19 through 25.

Step 27

Unhide the Background clip at the bottom of the Timeline. Then, Unlock Track 6. Split the clip on Track 6 at the 15th frame.

Step 28

Move the Playhead at the beginning of the Timeline. Click on the first part of the clip on Track 6. Add a keyframe. Drag the X-axis value to the right until the word disappears out of the screen. Like this. 👇Then, move the Playhead to the 6th frame and Reset the X-axis value to 0.0.

Step 29

Take the Playhead to 2 minutes and 10 seconds. Split it. Now, move the Playhead to 2 minutes and 19 seconds and add a keyframe. Lastly, take the Playhead to the very end of the clip and drag the text to the right side until it’s out of the screen once again.

Step 30

Go to the Effects tab. Select Glitch from the panel on the left. Then, apply “Glitch Dispersion” and “Glitch Stripe 2” to the clips at the start and at the end.

Step 31

Finally, Render the video to watch the final preview. And, you’re done! Congratulations on creating a repeated text animation in Filmora.

Summary

What you’ve learned:

• How to create text animations in Filmora
• Applying animation effects
• Make advanced edits on Titles in Filmora
• Hide and lock Tracks and Clips in Filmora

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download Filmora . Let it install and wait for it to run. Then, click on “New Project”. Now, you’re ready to edit!

Step 2

First, go to Titles and drag the Default Title to the Timeline.

Step 3

Now, double-click on the Default Title clip. Here, change its font to any bold font. Increase the text size to 120. Type in your text in the box. Scroll a bit down and change the Text Spacing to 8. Click OK.

Step 4

Take a Snapshot of this Default Title.

Step 5

Double-click on the Default Title clip once again. This time, click on its Advanced settings. Here, turn OFF Text Fill → turn ON Outline → change the Outline color to White → reduce Thickness to 1. Click OK. Now, take another Snapshot.

Step 6

Delete the Default Title clip from the Timeline. Now, drag the Outline snapshot that we just created to the Timeline. Open the Crop tool → change the Ratio to Custom → replace “1080” with “540”. Lastly, move the highlighted crop section to the top. Click OK.

Step 7

Double-click on the Snapshot to open its settings panel. Go to the Animation tab. Here, change the value of the Y-axis to “275”**.** Click OK. Now, take a Snapshot.

Step 8

Next, click on the Crop tool again and simply move the highlighted crop section to the bottom part of the screen. Click OK. Then, double-click on the snapshot clip in the Timeline and change the value of the Y-axis from “275” to “-275”**.** Click OK. Take a Snapshot again.

Step 9

Import a background image to My Media. Drag the background image to the Timeline. Double-click on it and drag the Scale bar until the background image covers the whole screen. Click OK. You should cut the background clip to make it 3 seconds long as well.

Step 10

Lock this track in the Timeline by pressing the highlighted button on the left. Then, go to “Track Manager” and add 6 new Tracks to the Timeline. Click OK.

Step 11

Drag the first Snapshot we made before to Track 6. Cut it so it’s 3 seconds long. Then, Lock the Track.

Step 12

Set the Playhead at the 15th frame on the Timeline. Then, drag the Upward Outline snapshot to this point. Double-click on it and change the Y-axis value to “**-4%**”. Then, reduce the Opacity to 0%. Now, move the Playhead 5 frames further. Next, increase the Opacity to 100% and increase the Y-axis value to around “105”. Don’t click OK yet.

Step 13

Move the Playhead to 1 minute and 5 seconds on the Timeline. Add a keyframe by clicking on the “+Add” button. Then, move the Playhead 5 frames forward. Here, change the Zoom Level to 25%.

Step 14

Double-click on the clip in Track 5. Drag the text like in the image below. Then, delete the part of the clip on the right side after 1 minute and 15 seconds.

Step 15

Hide the clips on Track 6 and Track 1 by clicking the “eye” icons next to them. Then, take a Snapshot. Now, drag this Snapshot right next to the clip on Track 5.

Step 16

Move the Playhead 3 frames forward from the starting point of the clip you just added. Unhide Track 6. Double-click on the clip on the right side of Track 5 and click on “+Add”. Move the Playhead 5 seconds forward and adjust the Upward Outline to fit the text.

Step 17

Move the Playhead 5 frames forward again. Drag the Y-axis value to the left until the outline clip overlaps the main text. Then, reduce the Opacity to 0%. Move the Playhead to 2 minutes and 10 seconds. Cut the Track and delete the clip on the right side. Lastly, Lock Track 5.

Step 18

Drag the Downward Outline snapshot to Track 4. Then, repeat the same process as in Step 16 and Step 17.

Step 19

Drag the Upward Outline snapshot to Track 3 at the 17th frame. Double-click on it and change the Opacity to 0%.

Step 20

Now, move 5 frames forward and increase the Opacity back to 100%. Then, drag the Y-axis value to the right until the screen looks like this.

Step 21

Move the Playhead to 1 minute and 5 seconds. Click on “+Add” to add a keyframe. Then, move the Playhead 5 frames forward. Double-click on the clip and stretch it from side to side to match something like this.

Step 22

Move the Playhead to 1 minute and 16 seconds. Split the clip and delete the part on the right side. Hide Track 4, 5, and 6. Then, take a Snapshot. Drag this Snapshot next to the clip on Track 3. Place the Playhead on 1 minute and 18 seconds. Then, unhide Track 4, 5, and 6.

Step 23

Double-click on the clip on the right side of Track 3. Add a keyframe by pressing “+Add”. Move the Playhead to 1 minute and 23 seconds. Now, resize the clip back to its original size by moving the rectangle left and right. Right now, it should look like this.

Step 24

Move the Playhead 5 frames forward. Drag the Y-axis value to the left until the screen looks like this.

Step 25

Move the Playhead 5 frames forward again. Drag the value of the Y-axis to the left until the screen looks like this. Then, change the Opacity to 0%. Finally, split the clip at 2 minutes and 10 seconds. Delete the part on the right side. Lock Track 3.

Step 26

Next, drag the Downward Snapshot on Track 2 and follow the same process as in Steps 19 through 25.

Step 27

Unhide the Background clip at the bottom of the Timeline. Then, Unlock Track 6. Split the clip on Track 6 at the 15th frame.

Step 28

Move the Playhead at the beginning of the Timeline. Click on the first part of the clip on Track 6. Add a keyframe. Drag the X-axis value to the right until the word disappears out of the screen. Like this. 👇Then, move the Playhead to the 6th frame and Reset the X-axis value to 0.0.

Step 29

Take the Playhead to 2 minutes and 10 seconds. Split it. Now, move the Playhead to 2 minutes and 19 seconds and add a keyframe. Lastly, take the Playhead to the very end of the clip and drag the text to the right side until it’s out of the screen once again.

Step 30

Go to the Effects tab. Select Glitch from the panel on the left. Then, apply “Glitch Dispersion” and “Glitch Stripe 2” to the clips at the start and at the end.

Step 31

Finally, Render the video to watch the final preview. And, you’re done! Congratulations on creating a repeated text animation in Filmora.

Summary

What you’ve learned:

• How to create text animations in Filmora
• Applying animation effects
• Make advanced edits on Titles in Filmora
• Hide and lock Tracks and Clips in Filmora

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download Filmora . Let it install and wait for it to run. Then, click on “New Project”. Now, you’re ready to edit!

Step 2

First, go to Titles and drag the Default Title to the Timeline.

Step 3

Now, double-click on the Default Title clip. Here, change its font to any bold font. Increase the text size to 120. Type in your text in the box. Scroll a bit down and change the Text Spacing to 8. Click OK.

Step 4

Take a Snapshot of this Default Title.

Step 5

Double-click on the Default Title clip once again. This time, click on its Advanced settings. Here, turn OFF Text Fill → turn ON Outline → change the Outline color to White → reduce Thickness to 1. Click OK. Now, take another Snapshot.

Step 6

Delete the Default Title clip from the Timeline. Now, drag the Outline snapshot that we just created to the Timeline. Open the Crop tool → change the Ratio to Custom → replace “1080” with “540”. Lastly, move the highlighted crop section to the top. Click OK.

Step 7

Double-click on the Snapshot to open its settings panel. Go to the Animation tab. Here, change the value of the Y-axis to “275”**.** Click OK. Now, take a Snapshot.

Step 8

Next, click on the Crop tool again and simply move the highlighted crop section to the bottom part of the screen. Click OK. Then, double-click on the snapshot clip in the Timeline and change the value of the Y-axis from “275” to “-275”**.** Click OK. Take a Snapshot again.

Step 9

Import a background image to My Media. Drag the background image to the Timeline. Double-click on it and drag the Scale bar until the background image covers the whole screen. Click OK. You should cut the background clip to make it 3 seconds long as well.

Step 10

Lock this track in the Timeline by pressing the highlighted button on the left. Then, go to “Track Manager” and add 6 new Tracks to the Timeline. Click OK.

Step 11

Drag the first Snapshot we made before to Track 6. Cut it so it’s 3 seconds long. Then, Lock the Track.

Step 12

Set the Playhead at the 15th frame on the Timeline. Then, drag the Upward Outline snapshot to this point. Double-click on it and change the Y-axis value to “**-4%**”. Then, reduce the Opacity to 0%. Now, move the Playhead 5 frames further. Next, increase the Opacity to 100% and increase the Y-axis value to around “105”. Don’t click OK yet.

Step 13

Move the Playhead to 1 minute and 5 seconds on the Timeline. Add a keyframe by clicking on the “+Add” button. Then, move the Playhead 5 frames forward. Here, change the Zoom Level to 25%.

Step 14

Double-click on the clip in Track 5. Drag the text like in the image below. Then, delete the part of the clip on the right side after 1 minute and 15 seconds.

Step 15

Hide the clips on Track 6 and Track 1 by clicking the “eye” icons next to them. Then, take a Snapshot. Now, drag this Snapshot right next to the clip on Track 5.

Step 16

Move the Playhead 3 frames forward from the starting point of the clip you just added. Unhide Track 6. Double-click on the clip on the right side of Track 5 and click on “+Add”. Move the Playhead 5 seconds forward and adjust the Upward Outline to fit the text.

Step 17

Move the Playhead 5 frames forward again. Drag the Y-axis value to the left until the outline clip overlaps the main text. Then, reduce the Opacity to 0%. Move the Playhead to 2 minutes and 10 seconds. Cut the Track and delete the clip on the right side. Lastly, Lock Track 5.

Step 18

Drag the Downward Outline snapshot to Track 4. Then, repeat the same process as in Step 16 and Step 17.

Step 19

Drag the Upward Outline snapshot to Track 3 at the 17th frame. Double-click on it and change the Opacity to 0%.

Step 20

Now, move 5 frames forward and increase the Opacity back to 100%. Then, drag the Y-axis value to the right until the screen looks like this.

Step 21

Move the Playhead to 1 minute and 5 seconds. Click on “+Add” to add a keyframe. Then, move the Playhead 5 frames forward. Double-click on the clip and stretch it from side to side to match something like this.

Step 22

Move the Playhead to 1 minute and 16 seconds. Split the clip and delete the part on the right side. Hide Track 4, 5, and 6. Then, take a Snapshot. Drag this Snapshot next to the clip on Track 3. Place the Playhead on 1 minute and 18 seconds. Then, unhide Track 4, 5, and 6.

Step 23

Double-click on the clip on the right side of Track 3. Add a keyframe by pressing “+Add”. Move the Playhead to 1 minute and 23 seconds. Now, resize the clip back to its original size by moving the rectangle left and right. Right now, it should look like this.

Step 24

Move the Playhead 5 frames forward. Drag the Y-axis value to the left until the screen looks like this.

Step 25

Move the Playhead 5 frames forward again. Drag the value of the Y-axis to the left until the screen looks like this. Then, change the Opacity to 0%. Finally, split the clip at 2 minutes and 10 seconds. Delete the part on the right side. Lock Track 3.

Step 26

Next, drag the Downward Snapshot on Track 2 and follow the same process as in Steps 19 through 25.

Step 27

Unhide the Background clip at the bottom of the Timeline. Then, Unlock Track 6. Split the clip on Track 6 at the 15th frame.

Step 28

Move the Playhead at the beginning of the Timeline. Click on the first part of the clip on Track 6. Add a keyframe. Drag the X-axis value to the right until the word disappears out of the screen. Like this. 👇Then, move the Playhead to the 6th frame and Reset the X-axis value to 0.0.

Step 29

Take the Playhead to 2 minutes and 10 seconds. Split it. Now, move the Playhead to 2 minutes and 19 seconds and add a keyframe. Lastly, take the Playhead to the very end of the clip and drag the text to the right side until it’s out of the screen once again.

Step 30

Go to the Effects tab. Select Glitch from the panel on the left. Then, apply “Glitch Dispersion” and “Glitch Stripe 2” to the clips at the start and at the end.

Step 31

Finally, Render the video to watch the final preview. And, you’re done! Congratulations on creating a repeated text animation in Filmora.

Summary

What you’ve learned:

• How to create text animations in Filmora
• Applying animation effects
• Make advanced edits on Titles in Filmora
• Hide and lock Tracks and Clips in Filmora

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download Filmora . Let it install and wait for it to run. Then, click on “New Project”. Now, you’re ready to edit!

Step 2

First, go to Titles and drag the Default Title to the Timeline.

Step 3

Now, double-click on the Default Title clip. Here, change its font to any bold font. Increase the text size to 120. Type in your text in the box. Scroll a bit down and change the Text Spacing to 8. Click OK.

Step 4

Take a Snapshot of this Default Title.

Step 5

Double-click on the Default Title clip once again. This time, click on its Advanced settings. Here, turn OFF Text Fill → turn ON Outline → change the Outline color to White → reduce Thickness to 1. Click OK. Now, take another Snapshot.

Step 6

Delete the Default Title clip from the Timeline. Now, drag the Outline snapshot that we just created to the Timeline. Open the Crop tool → change the Ratio to Custom → replace “1080” with “540”. Lastly, move the highlighted crop section to the top. Click OK.

Step 7

Double-click on the Snapshot to open its settings panel. Go to the Animation tab. Here, change the value of the Y-axis to “275”**.** Click OK. Now, take a Snapshot.

Step 8

Next, click on the Crop tool again and simply move the highlighted crop section to the bottom part of the screen. Click OK. Then, double-click on the snapshot clip in the Timeline and change the value of the Y-axis from “275” to “-275”**.** Click OK. Take a Snapshot again.

Step 9

Import a background image to My Media. Drag the background image to the Timeline. Double-click on it and drag the Scale bar until the background image covers the whole screen. Click OK. You should cut the background clip to make it 3 seconds long as well.

Step 10

Lock this track in the Timeline by pressing the highlighted button on the left. Then, go to “Track Manager” and add 6 new Tracks to the Timeline. Click OK.

Step 11

Drag the first Snapshot we made before to Track 6. Cut it so it’s 3 seconds long. Then, Lock the Track.

Step 12

Set the Playhead at the 15th frame on the Timeline. Then, drag the Upward Outline snapshot to this point. Double-click on it and change the Y-axis value to “**-4%**”. Then, reduce the Opacity to 0%. Now, move the Playhead 5 frames further. Next, increase the Opacity to 100% and increase the Y-axis value to around “105”. Don’t click OK yet.

Step 13

Move the Playhead to 1 minute and 5 seconds on the Timeline. Add a keyframe by clicking on the “+Add” button. Then, move the Playhead 5 frames forward. Here, change the Zoom Level to 25%.

Step 14

Double-click on the clip in Track 5. Drag the text like in the image below. Then, delete the part of the clip on the right side after 1 minute and 15 seconds.

Step 15

Hide the clips on Track 6 and Track 1 by clicking the “eye” icons next to them. Then, take a Snapshot. Now, drag this Snapshot right next to the clip on Track 5.

Step 16

Move the Playhead 3 frames forward from the starting point of the clip you just added. Unhide Track 6. Double-click on the clip on the right side of Track 5 and click on “+Add”. Move the Playhead 5 seconds forward and adjust the Upward Outline to fit the text.

Step 17

Move the Playhead 5 frames forward again. Drag the Y-axis value to the left until the outline clip overlaps the main text. Then, reduce the Opacity to 0%. Move the Playhead to 2 minutes and 10 seconds. Cut the Track and delete the clip on the right side. Lastly, Lock Track 5.

Step 18

Drag the Downward Outline snapshot to Track 4. Then, repeat the same process as in Step 16 and Step 17.

Step 19

Drag the Upward Outline snapshot to Track 3 at the 17th frame. Double-click on it and change the Opacity to 0%.

Step 20

Now, move 5 frames forward and increase the Opacity back to 100%. Then, drag the Y-axis value to the right until the screen looks like this.

Step 21

Move the Playhead to 1 minute and 5 seconds. Click on “+Add” to add a keyframe. Then, move the Playhead 5 frames forward. Double-click on the clip and stretch it from side to side to match something like this.

Step 22

Move the Playhead to 1 minute and 16 seconds. Split the clip and delete the part on the right side. Hide Track 4, 5, and 6. Then, take a Snapshot. Drag this Snapshot next to the clip on Track 3. Place the Playhead on 1 minute and 18 seconds. Then, unhide Track 4, 5, and 6.

Step 23

Double-click on the clip on the right side of Track 3. Add a keyframe by pressing “+Add”. Move the Playhead to 1 minute and 23 seconds. Now, resize the clip back to its original size by moving the rectangle left and right. Right now, it should look like this.

Step 24

Move the Playhead 5 frames forward. Drag the Y-axis value to the left until the screen looks like this.

Step 25

Move the Playhead 5 frames forward again. Drag the value of the Y-axis to the left until the screen looks like this. Then, change the Opacity to 0%. Finally, split the clip at 2 minutes and 10 seconds. Delete the part on the right side. Lock Track 3.

Step 26

Next, drag the Downward Snapshot on Track 2 and follow the same process as in Steps 19 through 25.

Step 27

Unhide the Background clip at the bottom of the Timeline. Then, Unlock Track 6. Split the clip on Track 6 at the 15th frame.

Step 28

Move the Playhead at the beginning of the Timeline. Click on the first part of the clip on Track 6. Add a keyframe. Drag the X-axis value to the right until the word disappears out of the screen. Like this. 👇Then, move the Playhead to the 6th frame and Reset the X-axis value to 0.0.

Step 29

Take the Playhead to 2 minutes and 10 seconds. Split it. Now, move the Playhead to 2 minutes and 19 seconds and add a keyframe. Lastly, take the Playhead to the very end of the clip and drag the text to the right side until it’s out of the screen once again.

Step 30

Go to the Effects tab. Select Glitch from the panel on the left. Then, apply “Glitch Dispersion” and “Glitch Stripe 2” to the clips at the start and at the end.

Step 31

Finally, Render the video to watch the final preview. And, you’re done! Congratulations on creating a repeated text animation in Filmora.

Summary

What you’ve learned:

• How to create text animations in Filmora
• Applying animation effects
• Make advanced edits on Titles in Filmora
• Hide and lock Tracks and Clips in Filmora

Free Download Free Download

This Blog Post Shows How to Create an Eye-Catching Paper Rip Effect for Your Videos Using Wondershare Filmora with These Easy-to-Follow Steps

Video editors use different effects to add creative flair to their projects. These effects can also create a transition between clips, make text or images stand out, or add movement to a static image.

One of the most fantastic effects is the paper rip effect. It can add a unique look to videos and a touch of creativity to any project. We will discuss the best software and techniques to achieve this effect quickly. So, let’s get started!

Part 1. What Is a Paper Rip Effect?

You must be wondering what is a paper rip effect in videos. It is a visual effect in which a piece of paper or other material appears torn apart or ripped. It is often used for transitions between shots or scenes in a video. Or, you can make the effect for your thumbnail.

Now, as we have seen what a paper rip effect looks like, isn’t it cool? So let’s see which software we need to make the magic happen.

Part 2. How to Make a Paper Rip Effect

We here take Wondershare Filmora as our editing tool to make the paper rip effect. It has many practical features allow you to customize your video with special effects, transitions, and more.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

• Over 1,000 video effects, transitions, titles, etc., to spice up high-quality videos.
• Support speech-to-text that allows smooth conversion of voiceover to text.
• Over 2,000+ audio resources range from music and audio effects, and much more.
• The shortcut key saves you time while editing videos.

Stepwise Guide to Make the Paper Rip Effect

Step1 Download Wondershare Filmora from the official website. If you have already downloaded the Wondershare Filmora. Open it, and let’s start editing the video.

Step2 First, we need to find a photo of a white paper that you can easily download from the internet and two videos in which you want to add this effect. Then import these three files to the media gallery.

Step3 Drag and drop Clip 1 onto the timeline and move the playhead to the last frame of the clip.

Alt text: Paper rip effect.

Step4 Now right-click on Clip 1 to open the menu and select Add Freeze Frame.

Step5 After adding a freeze frame, cut here.

Step6 Drag and drop the paper photo onto the second video track of the timeline, and make sure it starts at the cut on the first video track.

Step7 Double-click the paper picture on the timeline to open the settings window and then open the Compositing menu. Then Change the Blending Mode from Normal to Multiply.

In the preview window, we can see that the freeze frame has the paper texture now!

Step8 Now you can use the new feature of Filmora to export this small portion of the video. First, click and drag the playhead to the start of the freeze frame and press “I” on the keyboard to set the IN POINT, then move the playhead to the end of this freeze frame and press “O” on the keyboard to set the OUT POINT.

Note: If you have the latest version, Filmora will automatically set the OUT POINT on the timeline.

Step9 Then click Export and choose Create Video. Let’s name it freeze frame 1 and click on Export.

It will only export the selected part on the timeline. Once the exporting process is completed, Right-Click on the timeline and Cancel the selected range.

Step10 Import the Freeze Frame 1 to the media folder and replace the Freeze Frame + Paper Photo with this clip. Then adjust the length of this clip to 1 second.

Step11 Now let’s make the second part of the transition effect. You should drag and Drop Clip 2 onto the timeline and move the playhead to the clip’s first frame. Then Add a Freeze Frame; you can also do it by pressing the Alt+F keys. Now click and drag the playhead to the end of the freeze frame and make a Cut.

Step12 Drag and drop the paper photo onto the second video track of the timeline and make sure it starts at the beginning of the freeze frame on the first video track. And again, change the blending mode to Multiply as well.

Step13 Select the range you want to export by setting IN and OUT points as we did before. Press the I key on the keyboard to set the in point, drag the playhead to the out point, and press the O key.

Step14 This time use the shortcut Control + E to open the export window. Again, let’s name it freeze frame 2 and then export it.

Step15 You can use the keyboard shortcut Shift + X to cancel the selected range. Then import freeze frame 2 into the media folder and replace the freeze frame + paper photo. Adjust the length of this new clip to about 1 second.

Step16 Now you can add several Filmora transitions to finish the effect. Go to the Transitions window and find Evaporate 2.

Step17 Drag and drop it onto the cut between clip 1 and freeze frame 1 and the cut between clip 2 and freeze frame 2. You can also adjust the length of the transition.

Step18 Then, find Torned Paper Transition 4 in the Transitions window. Drag and drop it to the cut between freeze frame 1 and freeze frame 2. Then choose Prefix mode in the transition setting video. Adjust the length if needed.

Finally, it’s done. Let’s play the video and see how the paper effect and transitions enhanced the video.

Conclusion

We hope this post has helped you achieve the desired effect on your video. With Filmora’s intuitive user interface, you can customize your paper rip effect with text, images, and more to create a truly unique and eye-catching video. So get creative and start turning your videos into paper rip effects today!

Free Download For macOS 10.14 or later

• Over 1,000 video effects, transitions, titles, etc., to spice up high-quality videos.
• Support speech-to-text that allows smooth conversion of voiceover to text.
• Over 2,000+ audio resources range from music and audio effects, and much more.
• The shortcut key saves you time while editing videos.

Stepwise Guide to Make the Paper Rip Effect

Step1 Download Wondershare Filmora from the official website. If you have already downloaded the Wondershare Filmora. Open it, and let’s start editing the video.

Step2 First, we need to find a photo of a white paper that you can easily download from the internet and two videos in which you want to add this effect. Then import these three files to the media gallery.

Step3 Drag and drop Clip 1 onto the timeline and move the playhead to the last frame of the clip.

Alt text: Paper rip effect.

Step4 Now right-click on Clip 1 to open the menu and select Add Freeze Frame.

Step5 After adding a freeze frame, cut here.

Step6 Drag and drop the paper photo onto the second video track of the timeline, and make sure it starts at the cut on the first video track.

Step7 Double-click the paper picture on the timeline to open the settings window and then open the Compositing menu. Then Change the Blending Mode from Normal to Multiply.

In the preview window, we can see that the freeze frame has the paper texture now!

Step8 Now you can use the new feature of Filmora to export this small portion of the video. First, click and drag the playhead to the start of the freeze frame and press “I” on the keyboard to set the IN POINT, then move the playhead to the end of this freeze frame and press “O” on the keyboard to set the OUT POINT.

Note: If you have the latest version, Filmora will automatically set the OUT POINT on the timeline.

Step9 Then click Export and choose Create Video. Let’s name it freeze frame 1 and click on Export.

It will only export the selected part on the timeline. Once the exporting process is completed, Right-Click on the timeline and Cancel the selected range.

Step10 Import the Freeze Frame 1 to the media folder and replace the Freeze Frame + Paper Photo with this clip. Then adjust the length of this clip to 1 second.

Step11 Now let’s make the second part of the transition effect. You should drag and Drop Clip 2 onto the timeline and move the playhead to the clip’s first frame. Then Add a Freeze Frame; you can also do it by pressing the Alt+F keys. Now click and drag the playhead to the end of the freeze frame and make a Cut.

Step12 Drag and drop the paper photo onto the second video track of the timeline and make sure it starts at the beginning of the freeze frame on the first video track. And again, change the blending mode to Multiply as well.

Step13 Select the range you want to export by setting IN and OUT points as we did before. Press the I key on the keyboard to set the in point, drag the playhead to the out point, and press the O key.

Step14 This time use the shortcut Control + E to open the export window. Again, let’s name it freeze frame 2 and then export it.

Step15 You can use the keyboard shortcut Shift + X to cancel the selected range. Then import freeze frame 2 into the media folder and replace the freeze frame + paper photo. Adjust the length of this new clip to about 1 second.

Step16 Now you can add several Filmora transitions to finish the effect. Go to the Transitions window and find Evaporate 2.

Step17 Drag and drop it onto the cut between clip 1 and freeze frame 1 and the cut between clip 2 and freeze frame 2. You can also adjust the length of the transition.

Step18 Then, find Torned Paper Transition 4 in the Transitions window. Drag and drop it to the cut between freeze frame 1 and freeze frame 2. Then choose Prefix mode in the transition setting video. Adjust the length if needed.

Finally, it’s done. Let’s play the video and see how the paper effect and transitions enhanced the video.

Conclusion

We hope this post has helped you achieve the desired effect on your video. With Filmora’s intuitive user interface, you can customize your paper rip effect with text, images, and more to create a truly unique and eye-catching video. So get creative and start turning your videos into paper rip effects today!

Also read: