If You Have a Low Budget but Want to Create a Filmy Appearance of the Video, Then Read 6 Ways to Get Professional Filming Equipment by Using Household Objects

The professional and expensive gears are primarily out of budget for starters. But there is no need to stop filming because household things will give good output.

In this article, you will learn 6 pro tips to make professional filming gear using cardboard, container, and tape. It will turn out into POV and barrel roll shots. Scroll more to learn the top ways, and then enjoy the rest with your audience.

Part 1. Things to Remember Before Making Gears

Before using tools for professional videos, you should remember some side effects and cautions to make everything reliable and simple. Read the below outlines!

Not Professional Results

You should remember that homemade tools will give you different results than professional gear because they are expensive for a purpose. But you can experiment and get fun during filming with these products.

Safety Measures

If you use any heavy or temperature-sensitive equipment, you should take safety before operating them.

Handle Carefully

Before experimenting, make sure that you are holding everything tightly. Ensure that no accident occurs during filming!

After taking precautions and understanding the output, it’s time to make tools and film!

Part 2. Smooth Camera Movement with A Door

With a simple mobile camera, you can make smooth shots of any action, like walking, running, and playing. There is no need to get any professional gear.

It easy to achieve by attaching a camera to the door. You can use duct or any other tape which is easily available in the home. Fasten the mobile phone to the side of the door with tape, as shown below!

Moving the door while performing any action will result in smooth shots. Check out the final results below.

Part 3. Film Shots of Underwater

Filming underwater is always a dream of any videographer, but we were limited to get shots from the water’s surface. So now it’s time to add more creativity to your video.

First, you need to take a transparent container or any glass container. Pour water according to your need in it.

Note: Ensure the container is light enough to put on the phone.

Then, place the container on the lens of the phone to make a video. Then, take care of the phone from the water.

Pro Tip: You can also shine light source in water and add glitter or colors to get more astonishing shots.

Part 4. Make Colourful Shots Without Coloured Lights

All filmmakers love party lights and want to add colors like that in the video. Different colored lights in videos usually represent different mood swings and enhance the creativity of storytellers.

Professional videographers use expensive lights to give these effects. But you don’t need to purchase any expensive gear. Because you can make colorful shots easily with colored plastic binder dividers, or you can also use cellophane wraps.

First, wrap the colored divider around the LED light or any light you use to shoot video.

Note: Check the light temperature after short intervals because it melts or burns the dividers when the light source gets hot.

Now make the video and try with different colors to add suspense, horror, and happy effects to the video.

The video still needs more creative effects and designs; scroll more to read exciting tips.

Part 5. Different Shapes of Light with Cardboard

To add a fantasy location in the video and make light effects in the form of shapes, try out easily available cardboard. Most of the time, aesthetic videos are made by these hacks, giving viewers different vibes.

Only a professional photographer and videographer know how to attract the audience to the shots by doing these simple hacks.

The interesting thing is that if light has more shape, it will precisely describe more about the scene’s backstory, location, and context. Give it a try!

Step1 Cutting of cardboards

Cut the cardboard in any shape, whatever you want. We will experiment by cutting cardboard in window blinds shape.

Note: There is no specific recommendation for the cardboard, you can use any size or shape which suits you the best.

Step2 Make shots in different shapes of light

After giving shape, now move the cardboard around the light source and make a video. It seems like the subject is sitting near the window and has aesthetic vibes.

Note: The more precise the cutting of cardboard, the more professional it looks.

Become more creative and make more shapes with cardboard because the audience always prefers new content in the market.

Part 6. Create Point of View Shots

After adding colors and shapes, now it’s time to get some Point of View (POV) shots. Most of the time, viewers become bored by watching framing and filming coverages.

POV shots are mostly captured from a specific angle to show an object’s characters. They are mostly seen in food commercials, and videographers of snacks just love to make these shots.

To make POV shots, there is nothing specific required. You just have to make a suitable position for the lens. Follow the below guidelines and capture it!

Step1 Cut ends of packet

To create POV shots of your favorite snack, first of all, cut down both ends of the packets.

Step2 Attach packet on a camera

After cutting, attach the packet of snacks to the camera lens or phone with the help of old-fashioned tape.

Ensure the camera is turned on, and then make a POV shot. Now, it’s time to enjoy the rest part with the audience. Check out the final results, as shown below!

Due to this, the food seems good, and you can notice the number of spices too. This one actually looks amazing!

What if we add the rotatory shots, too, in the video? For this, check out the last tip and try that!

Part 7. Create a Barrel Roll Shot

Barrel roll shots are the full axial shot by spinning the camera lens. Epic shots that formerly required costly gimbals and sophisticated techniques are now as simple as strolling.

It’s pretty easy to make a rotatory shot at 360° by using equipment easily available at home. Rolling may feel anxiety and disorientation. Filmmakers utilize it to confuse or unnerve audiences in movies.

There is no need to purchase expensive gambles to make barrel roll clips. Instead, try this hack by utilizing a power drill present at your home. Then, follow the below steps to give it a professional look!

Step1 Take equipment

First, take a camera lens or smartphone, whatever you are using to make a video, and a power drill as a gimbal.

Step2 Camera with drill

Attach the camera to the power drill with the help of old-fashioned tape.

Note: You should have a piece of square foam or soft block placed between the camera and drill to assist.

Now, it’s time to turn on the drill and ensure that the video option is “Turn On” in the camera. Then, enjoy the shots of 360° with your audience!

Conclusion

Finally, you get a filmy video after performing above mentioned 6 DIY hacks without expensive gear. More creativity in a video attracts more audience, which makes you more prior in the videography industry.

You can also try more tools at home and share your ideas with others to get reviews on them and make better changes. Make sure that you are taking all safety measures and precautions.

Then, place the container on the lens of the phone to make a video. Then, take care of the phone from the water.

Pro Tip: You can also shine light source in water and add glitter or colors to get more astonishing shots.

Part 4. Make Colourful Shots Without Coloured Lights

All filmmakers love party lights and want to add colors like that in the video. Different colored lights in videos usually represent different mood swings and enhance the creativity of storytellers.

Professional videographers use expensive lights to give these effects. But you don’t need to purchase any expensive gear. Because you can make colorful shots easily with colored plastic binder dividers, or you can also use cellophane wraps.

First, wrap the colored divider around the LED light or any light you use to shoot video.

Note: Check the light temperature after short intervals because it melts or burns the dividers when the light source gets hot.

Now make the video and try with different colors to add suspense, horror, and happy effects to the video.

The video still needs more creative effects and designs; scroll more to read exciting tips.

Part 5. Different Shapes of Light with Cardboard

To add a fantasy location in the video and make light effects in the form of shapes, try out easily available cardboard. Most of the time, aesthetic videos are made by these hacks, giving viewers different vibes.

Only a professional photographer and videographer know how to attract the audience to the shots by doing these simple hacks.

The interesting thing is that if light has more shape, it will precisely describe more about the scene’s backstory, location, and context. Give it a try!

Step1 Cutting of cardboards

Cut the cardboard in any shape, whatever you want. We will experiment by cutting cardboard in window blinds shape.

Note: There is no specific recommendation for the cardboard, you can use any size or shape which suits you the best.

Step2 Make shots in different shapes of light

After giving shape, now move the cardboard around the light source and make a video. It seems like the subject is sitting near the window and has aesthetic vibes.

Note: The more precise the cutting of cardboard, the more professional it looks.

Become more creative and make more shapes with cardboard because the audience always prefers new content in the market.

Part 6. Create Point of View Shots

After adding colors and shapes, now it’s time to get some Point of View (POV) shots. Most of the time, viewers become bored by watching framing and filming coverages.

POV shots are mostly captured from a specific angle to show an object’s characters. They are mostly seen in food commercials, and videographers of snacks just love to make these shots.

To make POV shots, there is nothing specific required. You just have to make a suitable position for the lens. Follow the below guidelines and capture it!

Step1 Cut ends of packet

To create POV shots of your favorite snack, first of all, cut down both ends of the packets.

Step2 Attach packet on a camera

After cutting, attach the packet of snacks to the camera lens or phone with the help of old-fashioned tape.

Ensure the camera is turned on, and then make a POV shot. Now, it’s time to enjoy the rest part with the audience. Check out the final results, as shown below!

Due to this, the food seems good, and you can notice the number of spices too. This one actually looks amazing!

What if we add the rotatory shots, too, in the video? For this, check out the last tip and try that!

Part 7. Create a Barrel Roll Shot

Barrel roll shots are the full axial shot by spinning the camera lens. Epic shots that formerly required costly gimbals and sophisticated techniques are now as simple as strolling.

It’s pretty easy to make a rotatory shot at 360° by using equipment easily available at home. Rolling may feel anxiety and disorientation. Filmmakers utilize it to confuse or unnerve audiences in movies.

There is no need to purchase expensive gambles to make barrel roll clips. Instead, try this hack by utilizing a power drill present at your home. Then, follow the below steps to give it a professional look!

Step1 Take equipment

First, take a camera lens or smartphone, whatever you are using to make a video, and a power drill as a gimbal.

Step2 Camera with drill

Attach the camera to the power drill with the help of old-fashioned tape.

Note: You should have a piece of square foam or soft block placed between the camera and drill to assist.

Now, it’s time to turn on the drill and ensure that the video option is “Turn On” in the camera. Then, enjoy the shots of 360° with your audience!

Conclusion

Finally, you get a filmy video after performing above mentioned 6 DIY hacks without expensive gear. More creativity in a video attracts more audience, which makes you more prior in the videography industry.

You can also try more tools at home and share your ideas with others to get reviews on them and make better changes. Make sure that you are taking all safety measures and precautions.

How to Cut Videos on Mac without Using FFmpeg?

Tiktok, Instagram reels, and Ads are well-known short video platforms that are popular due to their ease of use. Making film collections for entertainment purposes is a popular trend. As the previous user mentioned, sometimes all you want is a section of your movie, which can be the highlight or any other part you want to keep. Long videos are no longer a problem with such a video cutter for Mac. If that’s what you’re looking for, you might want to look into some of the software that’s available here.

HOW TO CUT VIDEO ON MAC WITHOUT USING FFMPEG?

What are FFmpeg and its cons for cut videos?

Without transcoding the media, FFmpeg can cut, trim, and extract videos. This is an excellent method for preserving original quality and avoiding generation loss.

Because of how keyframes work, it is impossible to cut at an exact point in time using FFmpeg without transcoding the video. As a result, you’re left with a cut at the nearest keyframe.

BEST FREE FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

Want to Make an Epic CSGO Montage? You Are in the Right Place. This In-Depth Guide Will Explain How You Can Make an Attention-Grabbing Gaming Montage

CSGO (Counter-Strike: Global Offensive) is a popular objective-based multiplayer FPS (first-person shooter) released in 2012. The developers of this game are Hidden Path Entertainment and Valve. It’s one of the world’s most popular global eSports video games remains one of the most popular global esports, with millions of people playing it. Many people also love watching other skilled gamers play CSGO as montage videos.

With that in mind, we’ll explain how you can make CSGO montage videos and add effects to make them stand out and engaging.

How to Make Your CSGO Montage

If you are wondering: How can I create a CSGO montage video? Follow these steps:

Step1Record Your CSGO Gameplay

CSGO is compatible with Linux, PlayStation 3, Xbox 360, macOS, and Windows. You can record the CSGO demo by going to the top menu. The application will ask you to select the Capture option. Here, you can define the area you want to record and the audio settings. Specify a location where you want to save your recorded file.

You can also use a screen capture tool, such as Wondershare DemoCreator, to record your CSGO gameplay. The software saves the video clips you have captured on your PC’s hard drive.

To record your CSGO gameplay using DemoCreator, follow the steps below:

1. Open the software and click “Capture.” You can set various specifications, including the audio settings for your recording and the recorded area.

Record Screen with Democreator

1. Specify the location where you would like to save your recorded file.
2. Press F10 or click the start capturing option to start the recording. By indicating you’re recording a game, you’ll be able to increase the frame rate.
3. Click on F10 to stop the recording. The program will save the file on your PC.

Step2Choose Background Music that Fits Your CSGO Montage

The capability of music conveying emotions, authentic interactions, and a sense of realism is crucial to the viewers’ watching experience. It holds the attention of viewers and makes them want to continue watching your gaming montage.

Make sure the music you choose fits the theme of your CSGO montage video. The right music will provide a constant through-line that ties numerous CSGO gameplay clips together. What’s more? It can lend your montage a level of professionalism while giving it a polish.

Only use royalty-free music in your montage video, as this means you won’t pay any ongoing royalties when you use the music track. There are loads of royalty-free music libraries online, where you can find non-copyrighted montage music. These include StoryBlocks, FreeSound, and SoundCloud.

Once you’ve found the music you like, download it and use it in your CSGO montage video.

Step3Download Video Editing Software

You’ll need video editing software to put your series of CSGO gameplay clips together and make a montage video. While you’ll find numerous desktop-based video editing programs available, choose the best one.

A reliable video editing software should be user-friendly. The last thing you want is to get a video editing program that will make you spend months trying to learn how to edit your first montage video.

Pick a program with video editing templates; this will allow you to create CSGO montage videos swiftly because you only have to substitute the existing placeholder media with the content you are making. It should also have special effects and music.

If you’re tired of the plain and common video editing effects, check out Filmora. This video editing software has tons of cool effects that you can add to your CSGO montage videos.

Why We Need to Add Effects to Our CSGO Montage

Adding effects to your CSGO montage is crucial because of various reasons. They produce powerful entertainment for viewers. Special effects provide a creative way to spice up your gaming montage views. You can use them to captivate your audience and make them feel like your video is realistic.

Effects also help you add emotions and personality to your CSGO montage videos. You can also use them to set the tone and ensure your audience enjoys an exhilarating viewing experience.

Additionally, effects help you set the stage for your next scene, convey a mood, and move the story along. You can use them to emphasize the action occurring in the video and make viewers focus on it.

Useful Effects in Filmora that Can Make Your CSGO Video Impressive

We’ll now explore some of the effects Filmora offers on their video editing software. You can use them to make epic CSGO montage videos. Let’s dive in.

1. Split Screen Effect

Also known as video overlaying or picture-in-picture effect, Filmora’s split-screen effect allows you to display two or more video clips simultaneously in up-down style or side by side. You can use it to tell your story creatively by showing multiple viewpoints.

Filmora offers a range of animated split-screen layouts that you can use in your gaming montage video. You can also add multiple split screens.

Split Screen

2. Pan and Zoom

Also known as the Ken Burns effect, Fimora’s Pan and Zoom effect allows users to focus on specific parts of their CSGO montage video. You can use this feature to zoom in on an object or scenery to create movement or evoke emotional storytelling experiences in the video.

3. Fast Motion

Filmora’s time-lapse or fast motion effect makes your video clip play faster. The software allows you to increase the speed of your montage video by dragging the speed slider or the duration you need.

4. Transitions

Transitions improve the flow of your montage video and help you capture the viewers’ attention, as they make it look professional and cinematic. Filmora has loads of transitions that you can add between video clips to add interest and improve the flow of your montage video.

5. Overlays

Filmora has tons of overlays that you can apply to your CSGO montage videos. You can overlay a video clip on a video and an image or photo on your video. You can also size and mask the video overlay, adjust the position of the overlay, and add elements and animation to your video overlay.

6. Filters

The software allows you to add as many filters as you want to your montage video. These filters can dramatically change the feel and look of your gaming montage in a couple of clicks. You can add glitch effects, make your video shake or black and white, and much more.

Wondershare Filmora11 Express Better
Achieve More
Grow Together

Free Download Free Download Learn More

Step-By-Step Guide to Adding Effects to Your CSGO Montage Using Filmora

Applying transitions, overlays, filters, and transitions is a breeze. Just follow the steps below.

1. Launch Filmora and import your video file. You can do this by pressing Ctrl+I. A window will then pop up and allow you to find your video.
2. Select the video and click on the Open button to import it to Filmora’s media library.
3. Drag your CSGO montage and drop it to the timeline.

Import Media

1. To add transitions, head to the Transition tab. Here, you will find tons of transitions that you can use.

Add Transition

1. Choose the transition you want, then drag it to the beginning or end of the gaming montage in your timeline.
2. To add an overlay to your montage video, go to Effects>Overlay. You’ll find several categories here; click on one subcategory to check the available overlays. To add the effect, drag the overlay you like to your timeline. You can also take your mouse on the overlay effect, then click the plus icon to add the effect to your video.

Add Overlays

1. To add a filter effect to your montage, go to Effects and select the Filters option on your left side menu. Here, you’ll find several categories of filters. Choose the one you like and drag it to the video on your timeline. Double-click on the effect if you want to make changes to the filter.

Add Filters

1. To pan and zoom your video, right-click on your video in the timeline, then select the Video option and click on Crop and Zoom. Now select the Pan & Zoom option. You’ll see frames marked blue and orange over the video clip viewer. Click the Start frame, then modify the pan and zoom with the resizer and dragger to get the desired results before clicking the End frame.

Pan & Zoom

1. To add the Fast Motion effect, right-click on your montage video on the timeline and select Speed. Click on the Uniform Speed option. Now, drag the speed slider to the right side to increase the speed of your video.

Fast Motion

Once you have made all the changes in your CSGO montage, click Export. This option allows you to export and save your video on your computer.

Closing Thoughts:

You can make an impressive CSGO montage video that will capture the attention of viewers and get lots of views. Use Filmora to add effects that will make your gaming montage stand out and keep viewers watching until the end of the video.

Free Download Free Download Learn More

Step-By-Step Guide to Adding Effects to Your CSGO Montage Using Filmora

Applying transitions, overlays, filters, and transitions is a breeze. Just follow the steps below.

1. Launch Filmora and import your video file. You can do this by pressing Ctrl+I. A window will then pop up and allow you to find your video.
2. Select the video and click on the Open button to import it to Filmora’s media library.
3. Drag your CSGO montage and drop it to the timeline.

Import Media

1. To add transitions, head to the Transition tab. Here, you will find tons of transitions that you can use.

Add Transition

1. Choose the transition you want, then drag it to the beginning or end of the gaming montage in your timeline.
2. To add an overlay to your montage video, go to Effects>Overlay. You’ll find several categories here; click on one subcategory to check the available overlays. To add the effect, drag the overlay you like to your timeline. You can also take your mouse on the overlay effect, then click the plus icon to add the effect to your video.

Add Overlays

1. To add a filter effect to your montage, go to Effects and select the Filters option on your left side menu. Here, you’ll find several categories of filters. Choose the one you like and drag it to the video on your timeline. Double-click on the effect if you want to make changes to the filter.

Add Filters

1. To pan and zoom your video, right-click on your video in the timeline, then select the Video option and click on Crop and Zoom. Now select the Pan & Zoom option. You’ll see frames marked blue and orange over the video clip viewer. Click the Start frame, then modify the pan and zoom with the resizer and dragger to get the desired results before clicking the End frame.

Pan & Zoom

1. To add the Fast Motion effect, right-click on your montage video on the timeline and select Speed. Click on the Uniform Speed option. Now, drag the speed slider to the right side to increase the speed of your video.

Fast Motion

Once you have made all the changes in your CSGO montage, click Export. This option allows you to export and save your video on your computer.

Closing Thoughts:

You can make an impressive CSGO montage video that will capture the attention of viewers and get lots of views. Use Filmora to add effects that will make your gaming montage stand out and keep viewers watching until the end of the video.

20 Must-Have Graduation Songs

20 Must-have Graduation Songs for Slideshow

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Graduation years are full of fun, hard work, rallies, friends, studies, night-outs, and much more. Expressing what one has gone through over these years in words is practically not possible but a few emotions can be captured, stored, and shared using a slideshow. Further, adding some amazing songs will further bring back the emotions and feelings of those graduation years.

So, if you too are keen to create a graduation slideshow with some wonderful pictures, videos, and songs, the content below will help you with the best tools and tips to create an excellent slideshow.

In this article

01 [Tips for creating a graduation slideshow](#Part 1)

02 [Top 20 songs for graduation slideshow](#Part 2)

03 [Create Graduation Songs for Slideshow with Filmora](#Part 3)

Part 1 Tips for creating a graduation slideshow

To create an interesting graduation slideshow, check out the below-listed tips.

● A slideshow contains images and videos and thus to create an interesting file, pick up the most interesting images as well as videos. Make sure to include the image and videos from different years of graduation.

● Music adds to the emotion and adding songs to your graduation slideshow will make them even more interesting and catchy.

● Adding some extra elements like text, emoji, slogans and more can further enhance the overall look of the slideshow.

● Add some bright colors and add transitions to your slideshow using good editing software.

● You can even use software that comes with a preset template that can help you create a good graduation slideshow in a simple quick manner.

Part 2 Top 20 songs for graduation slideshow

As we have mentioned above, music is the essence of any slideshow, and the graduation slideshow is no exception to this. So, to bring in the emotions of your graduation years adding the right songs to the slideshow is important. With the myriad of song options available, getting confused and selecting a few can be a difficult task. To help you with this, we have shortlisted the top graduation slideshow songs 2021 that can be used for a graduation slideshow to bring in the feelings.

● Graduation-Friends Forever by Vitamin C

● Schools Out by Alice Cooper

● Graduate by Third Eye Blind

● My Last Semester by The Wonder years

● Graduation Day by Beach Boys

● A Moment Like This by Kelly Clarkson

● Good Riddance Time of Your Life by Green Day

● See You Again by Wiz Khalifa

● Breakaway by Kelly Clarkson

● End of the Road by Boyz II Men

● Closing Time by Semisonic

● The World’s Greatest by R. Kelly

● We are the Champions by Queen

● Don’t Look Back by Boston

● Moment 4Life by Nicky Minaj ft. Drake

● Its Time by Imagine Dragons

● Firework by Katy Perry

● We Are Young by Fun ft. Janelle Monae

● No Such Thing by John Mayer

● I Hope you Dance by Lee Ann Womack

Part 3 Create Graduation Songs for Slideshow with Filmora

To create a memorable slideshow having pictures, videos, and music files, good software is needed and here we recommend Wondershare Filmora Video Editor as the best choice. This Windows and Mac-based video editing tool can be used for several video editing and other tasks including slideshow making.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

The tool comes packed in with all the needed features for creating an impressive slideshow-like video editing, image editing, visual effects, filters, overlays, and much more.

01Key features of the software

● Create graduation and other slideshows by adding images, videos, and music files.

● Multiple editing features are supported along with editing functions like overlays, visual effects, texts, filters, and more.

● All key images and other file formats are supported including jpg, png, gif, and more.

● Allows recording your own voice-over to add that special extra effect.

● The slideshow can be cropped, pan and zoom manually or automatically as needed.

● Share the created slideshow over social media platforms.

● Burn DVDs of your created slideshow to be shared as a gift with your friends, teachers, and loved ones.

02Pros and Cons of using the software

Pros:

● Support to a wide range of video and other editing functions.

● All key image formats are supported including BMP, jpg, png, tiff, and more.

● Comes with a built-in library of music files and tracks.

● Multiple options for transitions, filters, and other add-ons are available.

● Windows and Mac support.

Cons

● Paid software

● Need to download and install the software.

03Steps to create a graduation slideshow with music using Wondershare Filmora

Step 1. Download, install and launch the Wondershare Filmora software on your system from the official software page. Tap on the New Project button to start creating a new slideshow.

Step 2. Next, import and add all the images, music, and other media files to the Media Library of the software. These files can be then moved to the timeline. The order of the files can be changed as needed.

The editing features can be used to crop and customize the images and other media files as needed.

Step 3. Now transitions can be added to the slideshow. The software has multiple options available like cross merge, sweep clockwise, and many more to choose from. The duration of the transitions can also be adjusted as needed.

Step 4. Next comes the adding and editing of the background music. You can either add a song of your choice or can also use a music file from the built-in audio library. Voice-over recordings can also be added to give that extra personal touch. The audio files can also be edited using the supported features of the software.

Step 5. Finally, save the created slideshow and you can even export it to social media platforms or create DVDs.

● Ending Thoughts →

● Creating a graduation slideshow will bring back all the wonderful memories of the graduation years.

● Music plays an important part in any slideshow as it helps express emotions.

● Wonderware Filmora is a great tool for creating a wonderful slideshow with images, videos, and music files.

Try It Free Try It Free

Graduation years are full of fun, hard work, rallies, friends, studies, night-outs, and much more. Expressing what one has gone through over these years in words is practically not possible but a few emotions can be captured, stored, and shared using a slideshow. Further, adding some amazing songs will further bring back the emotions and feelings of those graduation years.

So, if you too are keen to create a graduation slideshow with some wonderful pictures, videos, and songs, the content below will help you with the best tools and tips to create an excellent slideshow.

In this article

01 [Tips for creating a graduation slideshow](#Part 1)

02 [Top 20 songs for graduation slideshow](#Part 2)

03 [Create Graduation Songs for Slideshow with Filmora](#Part 3)

Part 1 Tips for creating a graduation slideshow

To create an interesting graduation slideshow, check out the below-listed tips.

● A slideshow contains images and videos and thus to create an interesting file, pick up the most interesting images as well as videos. Make sure to include the image and videos from different years of graduation.

● Music adds to the emotion and adding songs to your graduation slideshow will make them even more interesting and catchy.

● Adding some extra elements like text, emoji, slogans and more can further enhance the overall look of the slideshow.

● Add some bright colors and add transitions to your slideshow using good editing software.

● You can even use software that comes with a preset template that can help you create a good graduation slideshow in a simple quick manner.

Part 2 Top 20 songs for graduation slideshow

As we have mentioned above, music is the essence of any slideshow, and the graduation slideshow is no exception to this. So, to bring in the emotions of your graduation years adding the right songs to the slideshow is important. With the myriad of song options available, getting confused and selecting a few can be a difficult task. To help you with this, we have shortlisted the top graduation slideshow songs 2021 that can be used for a graduation slideshow to bring in the feelings.

● Graduation-Friends Forever by Vitamin C

● Schools Out by Alice Cooper

● Graduate by Third Eye Blind

● My Last Semester by The Wonder years

● Graduation Day by Beach Boys

● A Moment Like This by Kelly Clarkson

● Good Riddance Time of Your Life by Green Day

● See You Again by Wiz Khalifa

● Breakaway by Kelly Clarkson

● End of the Road by Boyz II Men

● Closing Time by Semisonic

● The World’s Greatest by R. Kelly

● We are the Champions by Queen

● Don’t Look Back by Boston

● Moment 4Life by Nicky Minaj ft. Drake

● Its Time by Imagine Dragons

● Firework by Katy Perry

● We Are Young by Fun ft. Janelle Monae

● No Such Thing by John Mayer

● I Hope you Dance by Lee Ann Womack

Part 3 Create Graduation Songs for Slideshow with Filmora

To create a memorable slideshow having pictures, videos, and music files, good software is needed and here we recommend Wondershare Filmora Video Editor as the best choice. This Windows and Mac-based video editing tool can be used for several video editing and other tasks including slideshow making.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

The tool comes packed in with all the needed features for creating an impressive slideshow-like video editing, image editing, visual effects, filters, overlays, and much more.

01Key features of the software

● Create graduation and other slideshows by adding images, videos, and music files.

● Multiple editing features are supported along with editing functions like overlays, visual effects, texts, filters, and more.

● All key images and other file formats are supported including jpg, png, gif, and more.

● Allows recording your own voice-over to add that special extra effect.

● The slideshow can be cropped, pan and zoom manually or automatically as needed.

● Share the created slideshow over social media platforms.

● Burn DVDs of your created slideshow to be shared as a gift with your friends, teachers, and loved ones.

02Pros and Cons of using the software

Pros:

● Support to a wide range of video and other editing functions.

● All key image formats are supported including BMP, jpg, png, tiff, and more.

● Comes with a built-in library of music files and tracks.

● Multiple options for transitions, filters, and other add-ons are available.

● Windows and Mac support.

Cons

● Paid software

● Need to download and install the software.

03Steps to create a graduation slideshow with music using Wondershare Filmora

Step 1. Download, install and launch the Wondershare Filmora software on your system from the official software page. Tap on the New Project button to start creating a new slideshow.

Step 2. Next, import and add all the images, music, and other media files to the Media Library of the software. These files can be then moved to the timeline. The order of the files can be changed as needed.

The editing features can be used to crop and customize the images and other media files as needed.

Step 3. Now transitions can be added to the slideshow. The software has multiple options available like cross merge, sweep clockwise, and many more to choose from. The duration of the transitions can also be adjusted as needed.

Step 4. Next comes the adding and editing of the background music. You can either add a song of your choice or can also use a music file from the built-in audio library. Voice-over recordings can also be added to give that extra personal touch. The audio files can also be edited using the supported features of the software.

Step 5. Finally, save the created slideshow and you can even export it to social media platforms or create DVDs.

● Ending Thoughts →

● Creating a graduation slideshow will bring back all the wonderful memories of the graduation years.

● Music plays an important part in any slideshow as it helps express emotions.

● Wonderware Filmora is a great tool for creating a wonderful slideshow with images, videos, and music files.

Try It Free Try It Free

Graduation years are full of fun, hard work, rallies, friends, studies, night-outs, and much more. Expressing what one has gone through over these years in words is practically not possible but a few emotions can be captured, stored, and shared using a slideshow. Further, adding some amazing songs will further bring back the emotions and feelings of those graduation years.

So, if you too are keen to create a graduation slideshow with some wonderful pictures, videos, and songs, the content below will help you with the best tools and tips to create an excellent slideshow.

In this article

01 [Tips for creating a graduation slideshow](#Part 1)

02 [Top 20 songs for graduation slideshow](#Part 2)

03 [Create Graduation Songs for Slideshow with Filmora](#Part 3)

Part 1 Tips for creating a graduation slideshow

To create an interesting graduation slideshow, check out the below-listed tips.

● A slideshow contains images and videos and thus to create an interesting file, pick up the most interesting images as well as videos. Make sure to include the image and videos from different years of graduation.

● Music adds to the emotion and adding songs to your graduation slideshow will make them even more interesting and catchy.

● Adding some extra elements like text, emoji, slogans and more can further enhance the overall look of the slideshow.

● Add some bright colors and add transitions to your slideshow using good editing software.

● You can even use software that comes with a preset template that can help you create a good graduation slideshow in a simple quick manner.

Part 2 Top 20 songs for graduation slideshow

As we have mentioned above, music is the essence of any slideshow, and the graduation slideshow is no exception to this. So, to bring in the emotions of your graduation years adding the right songs to the slideshow is important. With the myriad of song options available, getting confused and selecting a few can be a difficult task. To help you with this, we have shortlisted the top graduation slideshow songs 2021 that can be used for a graduation slideshow to bring in the feelings.

● Graduation-Friends Forever by Vitamin C

● Schools Out by Alice Cooper

● Graduate by Third Eye Blind

● My Last Semester by The Wonder years

● Graduation Day by Beach Boys

● A Moment Like This by Kelly Clarkson

● Good Riddance Time of Your Life by Green Day

● See You Again by Wiz Khalifa

● Breakaway by Kelly Clarkson

● End of the Road by Boyz II Men

● Closing Time by Semisonic

● The World’s Greatest by R. Kelly

● We are the Champions by Queen

● Don’t Look Back by Boston

● Moment 4Life by Nicky Minaj ft. Drake

● Its Time by Imagine Dragons

● Firework by Katy Perry

● We Are Young by Fun ft. Janelle Monae

● No Such Thing by John Mayer

● I Hope you Dance by Lee Ann Womack

Part 3 Create Graduation Songs for Slideshow with Filmora

To create a memorable slideshow having pictures, videos, and music files, good software is needed and here we recommend Wondershare Filmora Video Editor as the best choice. This Windows and Mac-based video editing tool can be used for several video editing and other tasks including slideshow making.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

The tool comes packed in with all the needed features for creating an impressive slideshow-like video editing, image editing, visual effects, filters, overlays, and much more.

01Key features of the software

● Create graduation and other slideshows by adding images, videos, and music files.

● Multiple editing features are supported along with editing functions like overlays, visual effects, texts, filters, and more.

● All key images and other file formats are supported including jpg, png, gif, and more.

● Allows recording your own voice-over to add that special extra effect.

● The slideshow can be cropped, pan and zoom manually or automatically as needed.

● Share the created slideshow over social media platforms.

● Burn DVDs of your created slideshow to be shared as a gift with your friends, teachers, and loved ones.

02Pros and Cons of using the software

Pros:

● Support to a wide range of video and other editing functions.

● All key image formats are supported including BMP, jpg, png, tiff, and more.

● Comes with a built-in library of music files and tracks.

● Multiple options for transitions, filters, and other add-ons are available.

● Windows and Mac support.

Cons

● Paid software

● Need to download and install the software.

03Steps to create a graduation slideshow with music using Wondershare Filmora

Step 1. Download, install and launch the Wondershare Filmora software on your system from the official software page. Tap on the New Project button to start creating a new slideshow.

Step 2. Next, import and add all the images, music, and other media files to the Media Library of the software. These files can be then moved to the timeline. The order of the files can be changed as needed.

The editing features can be used to crop and customize the images and other media files as needed.

Step 3. Now transitions can be added to the slideshow. The software has multiple options available like cross merge, sweep clockwise, and many more to choose from. The duration of the transitions can also be adjusted as needed.

Step 4. Next comes the adding and editing of the background music. You can either add a song of your choice or can also use a music file from the built-in audio library. Voice-over recordings can also be added to give that extra personal touch. The audio files can also be edited using the supported features of the software.

Step 5. Finally, save the created slideshow and you can even export it to social media platforms or create DVDs.

● Ending Thoughts →

● Creating a graduation slideshow will bring back all the wonderful memories of the graduation years.

● Music plays an important part in any slideshow as it helps express emotions.

● Wonderware Filmora is a great tool for creating a wonderful slideshow with images, videos, and music files.

Try It Free Try It Free

Graduation years are full of fun, hard work, rallies, friends, studies, night-outs, and much more. Expressing what one has gone through over these years in words is practically not possible but a few emotions can be captured, stored, and shared using a slideshow. Further, adding some amazing songs will further bring back the emotions and feelings of those graduation years.

So, if you too are keen to create a graduation slideshow with some wonderful pictures, videos, and songs, the content below will help you with the best tools and tips to create an excellent slideshow.

In this article

01 [Tips for creating a graduation slideshow](#Part 1)

02 [Top 20 songs for graduation slideshow](#Part 2)

03 [Create Graduation Songs for Slideshow with Filmora](#Part 3)

Part 1 Tips for creating a graduation slideshow

To create an interesting graduation slideshow, check out the below-listed tips.

● A slideshow contains images and videos and thus to create an interesting file, pick up the most interesting images as well as videos. Make sure to include the image and videos from different years of graduation.

● Music adds to the emotion and adding songs to your graduation slideshow will make them even more interesting and catchy.

● Adding some extra elements like text, emoji, slogans and more can further enhance the overall look of the slideshow.

● Add some bright colors and add transitions to your slideshow using good editing software.

● You can even use software that comes with a preset template that can help you create a good graduation slideshow in a simple quick manner.

Part 2 Top 20 songs for graduation slideshow

As we have mentioned above, music is the essence of any slideshow, and the graduation slideshow is no exception to this. So, to bring in the emotions of your graduation years adding the right songs to the slideshow is important. With the myriad of song options available, getting confused and selecting a few can be a difficult task. To help you with this, we have shortlisted the top graduation slideshow songs 2021 that can be used for a graduation slideshow to bring in the feelings.

● Graduation-Friends Forever by Vitamin C

● Schools Out by Alice Cooper

● Graduate by Third Eye Blind

● My Last Semester by The Wonder years

● Graduation Day by Beach Boys

● A Moment Like This by Kelly Clarkson

● Good Riddance Time of Your Life by Green Day

● See You Again by Wiz Khalifa

● Breakaway by Kelly Clarkson

● End of the Road by Boyz II Men

● Closing Time by Semisonic

● The World’s Greatest by R. Kelly

● We are the Champions by Queen

● Don’t Look Back by Boston

● Moment 4Life by Nicky Minaj ft. Drake

● Its Time by Imagine Dragons

● Firework by Katy Perry

● We Are Young by Fun ft. Janelle Monae

● No Such Thing by John Mayer

● I Hope you Dance by Lee Ann Womack

Part 3 Create Graduation Songs for Slideshow with Filmora

To create a memorable slideshow having pictures, videos, and music files, good software is needed and here we recommend Wondershare Filmora Video Editor as the best choice. This Windows and Mac-based video editing tool can be used for several video editing and other tasks including slideshow making.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

The tool comes packed in with all the needed features for creating an impressive slideshow-like video editing, image editing, visual effects, filters, overlays, and much more.

01Key features of the software

● Create graduation and other slideshows by adding images, videos, and music files.

● Multiple editing features are supported along with editing functions like overlays, visual effects, texts, filters, and more.

● All key images and other file formats are supported including jpg, png, gif, and more.

● Allows recording your own voice-over to add that special extra effect.

● The slideshow can be cropped, pan and zoom manually or automatically as needed.

● Share the created slideshow over social media platforms.

● Burn DVDs of your created slideshow to be shared as a gift with your friends, teachers, and loved ones.

02Pros and Cons of using the software

Pros:

● Support to a wide range of video and other editing functions.

● All key image formats are supported including BMP, jpg, png, tiff, and more.

● Comes with a built-in library of music files and tracks.

● Multiple options for transitions, filters, and other add-ons are available.

● Windows and Mac support.

Cons

● Paid software

● Need to download and install the software.

03Steps to create a graduation slideshow with music using Wondershare Filmora

Step 1. Download, install and launch the Wondershare Filmora software on your system from the official software page. Tap on the New Project button to start creating a new slideshow.

Step 2. Next, import and add all the images, music, and other media files to the Media Library of the software. These files can be then moved to the timeline. The order of the files can be changed as needed.

The editing features can be used to crop and customize the images and other media files as needed.

Step 3. Now transitions can be added to the slideshow. The software has multiple options available like cross merge, sweep clockwise, and many more to choose from. The duration of the transitions can also be adjusted as needed.

Step 4. Next comes the adding and editing of the background music. You can either add a song of your choice or can also use a music file from the built-in audio library. Voice-over recordings can also be added to give that extra personal touch. The audio files can also be edited using the supported features of the software.

Step 5. Finally, save the created slideshow and you can even export it to social media platforms or create DVDs.

● Ending Thoughts →

● Creating a graduation slideshow will bring back all the wonderful memories of the graduation years.

● Music plays an important part in any slideshow as it helps express emotions.

● Wonderware Filmora is a great tool for creating a wonderful slideshow with images, videos, and music files.

Also read: