7 Tips to Create Teaching Videos

For many teachers, online classes begin with a live recording of their lectures or lessons. Sending the recorded lectures to the students allows them to pause the video and rewatch it multiple times.

Recording lectures before class can assist lecturers in filling gaps that may arise due to your absence. You don’t have to worry about missing lessons if you’re going on vacation or to be sick for an extended time.

You can keep the class continuing even if you are absent by using pre-recorded lectures and sending the file to the class, so they know the lesson. With the help of an online lecture software or tool available on the internet, you can download it free.

These are the steps in creating an instructional video in your classes:

Know Your Target Audience

Before you record the video to present in your classes, you need to know your target audience. We all know that some teachers handle grade school, and some handle high school level. We need to discover what kind of knowledge or skills your students hope to gain in your class learning the topic you presented. Try to use your book, or maybe add some research and then use that information to help you discuss with your students.

Things you need to remember before you proceed to the next step:

Who is your audience? We, educators, already know our audience. It depends on the school and what level we are going to handle. It’s either grade school level or high school level.
What is your topic/s? There are a lot of topics and subjects in the field of teaching but try to pick only one topic or subject to present to your class. For example, Computer Subject because I’m a computer teacher. I will be using this subject or topic about computers to create my instructional video for the class.
What is the learning objective or learning outcome of your video? The learning objective of your video is the outcome that captures precisely what knowledge, skills, and attitudes the students should be able to exhibit following the instructions.
How will your video benefit your audience? The students will learn and understand the lesson you are discussing, helping them gain knowledge of that subject to answer all the assignments, quizzes, or maybe an activity you will give them.

Write a Script

Once you know your audience and have the topic you need, it’s time to write a script. Think about your plan for presenting your video in your classes.

Here are a few more writing script tips to help you in your classes:

Go to the mirror and practice. This tip may help some teachers instead of calling their loved ones and getting feedback about the script they write.

Explain what you’re doing and why you’re doing it. You are not only presenting the topic and explaining it but also showing the class what the topic is all about, which will be suitable for your students. Present some examples, pictures, or videos for them to know better what your discussion is all about.
Knowing your script 100% is important. Make sure that you already know your script before you record. If you forget something or make a mistake, go back to the beginning and repeat it correctly. Remember as a teacher that we are not allowed to make mistakes in the eyes of the students. So, double-check everything before you record it and show it to the class.

Record the Narration

After writing your script, let’s try to record the narration. You don’t need any application software where you can record the narration. Simply using your mobile phone and having a good background is enough.

Using a microphone to record the narration is necessary. Getting those headphones with one connected microphone is good. Some of that has noise cancellation, providing a much better sound quality while recording and ensuring that your videos don’t contain background noise. Then, find a quiet place to record. Explain to your family members that no one will ever talk loud or shout while you are recording the narration.

Once you are ready to hit that record button, speak clearly. Nobody is perfect, so it’s ok if you make a mistake. You don’t need to start over, just pause and start again. You can remove the error or mistake by editing your finished product. Make sure your narration will be the same on the screen while recording your video.

Record and Edit your Video

The first thing you need to do in recording your video is to clean up your computer screen and close all the unnecessary applications. You need to turn off also the notifications that will pop up on your computer before you start recording. You can also add your recorded narration to your video.

Here are a few simple tips for editing your video:

Add some interactive elements like motions to highlight key points of your video.
Adding music to your video is optional but may elevate a decent video to the next level. Pick something cheery. You want your audience to feel good while learning.

The Video Duration

I’d say it’s one of the first things students look at before they click the ‘play’ button of the video. It will benefit both teacher and the students if the video is brief and direct to the point. Some students are more likely to want a short video, or maybe let’s focus on the time between 20 - 30 minutes video, where they can watch and learn on any platform, anytime. After that, you can add time by adding other pieces of information and giving activities and assignments.

Be Yourself

Be yourself, and don’t be afraid to make mistakes sometimes. Make sure that your personality shines throughout the video. Try to research how some teachers or maybe some speakers speak naturally and have a conversational manner with an enthusiastic tone.

When you are recording yourself talking, look right at the camera so students can feel eye contact with you, even if it is online. Sometimes we forget the words we need to say to the class, so try to prepare a note next to your webcam. The messages you prepare will help you don’t look away from the camera all the time. Don’t pretend to the class that you’re reading something, just talk naturally as you would in real classrooms.

Instead of sharing your recorded video with your students, you can also share it directly to online video platforms like YouTube, Facebook, and Vimeo or save the video as a local file to upload on a social media platform. They can go there and watch the video. You can also upload your file to the school learning management system like Google Classroom. Please take note of this; before sending the recorded video to your students, share it with first to a few people to get some video feedback about what you created. This might help you ensure that your message is clear and that your video accomplishes your goals for your students.

There’s a chance that your recorded video doesn’t meet your requirements or you are not satisfied with that for the first time. Don’t worry; try it again, even if you recorded it once or several times. You need to trust yourself by doing it because we are teachers; we are doing our best for the students to learn something from us.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

7 Best Green Screen Software for Beginners on Mac

Almost every major film released in 2019 used green screen effects for at least one scene. While that is an entirely unscientific assessment that you should not cite in a college paper, given the accessibility and sophistication of today’s green screen technology, it is probably not far off. Everyone has access to expert compositing technology, from Marvel movies to local news stations.

WHAT ARE GREEN SCREEN AND CHROMA KEYING?

The colored background you want to make transparent and remove from your shot is referred to as a green screen. This is typically a single-colored backdrop, which can be any color but is usually bright green because it is the color most dissimilar to human skin tones. (Blue screens were commonly used in the early days of film, and they may still be used in some cases.)

The chroma key is a time-honored and widely used visual effects technique. Simply stated, chroma key is the process of photographing a subject against a solid-color background and then removing that background in post-production and replacing it with transparency. The subject can then be positioned in front of any new background.

BEST FREE GREEN SCREEN SOFTWARE FOR BEGINNERS ON MAC

FILMORA VIDEO EDITOR

Supported OS: Windows, Mac, iOS, Android

Filmora Video Editor has two modes based on your experience with video editing software. Users can use the easy mode or the full feature editor to access the program’s full focus.

The theme focus can also make it easier to select the videos and audio that you want to use. There are a number of features and effects that can be used to complement various themes, which can help improve transitions or find different effects in the program without having to dig around.

The preview mode and music tracks available from the themes make it simple to enhance your video.

The full feature mode gives you even more control; this is where Filmora begins to resemble an actual video editor. You can drag images, sounds, and other media into different tracks and apply advanced effects.

Green screens, premade filters for color correction, cropping, cutting, splitting, and combining with simple tools are all available in the full feature mode. The full-featured editor also has an audio mixer and equalizer, as well as the ability to burn your creations to DVD, Facebook, Vimeo, and other platforms.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

4k Editing Support

Gif Support

Noise Removal

Color Tuning

Advanced Text Editor

Audio Mixer

Video Stabilization

Scene Detection

Audio Equalizer

Chroma Keying

Pros:

It can be a program that’s easy to master even if you have never used a video editing program before
There are plenty of visual effects and premade effects that can help you make a great looking video within a few minutes
The 4k video support is also helpful

Cons:

It does lack a few advanced features like the option for motion tracking, multi-camera support, and assistance with 360° videos

Steps On How To Chroma Key On Filmora

Click the “Import Media Files Here“ to import the background video and video with the green screen background into the media library. And then drag and drop the background video and green screen video to the video track in the timeline respectively.

Note: Ensure the video with green screen background is placed as the overlay video.

Right-click on the overlay video and find the “Green Screen“ option.

Click on “Green Screen“ and you’ll open the video editing panel. And the green screen background has been removed.

To open the green screen editing panel, you can also double click the overlay video, then check “Chroma Key” to apply the green screen function. And you can also adjust the offset, tolerance, edge thickness, etc. according to your own needs.

When you’re satisfied with the effect, you can click the “OK“ button to save the changes.

OPENSHOT

OpenShot Video Editor is a free, open-source video editor for Mac and Windows PC that can take your videos, photos, and music files and assist you in creating the film you’ve always wanted to make. Add subtitles, transitions, and effects with ease, and then export your film to DVD, YouTube, Vimeo, Xbox 360, and a variety of other popular formats.

A cross-platform video editing solution designed to help businesses of all sizes edit audios, videos, or images using a drag-and-drop interface. Administrators can use OpenShot Video Editor to enhance videos by adding animation effects such as fade, flying text, snow, and bounce, watermarks, 3D titles, and audio tracks, among other things.

The multilingual platform, which was specifically designed for video editors, allows teams to adjust color contrasts and brightness, as well as add time.

Supported OS: Windows, macOS, Linux

Features:

Cross-platform (Linux, Mac, and Windows)
Support for many videos, audio, and image formats (based on FFmpeg)
Powerful curve-based Key frame animations
Desktop integration (drag and drop support)
Unlimited tracks/layers
Clip resizing, scaling, trimming, snapping, rotation, and cutting
Video transitions with real-time previews
Compositing, image overlays, watermarks
Title templates, title creation, sub-titles
2D animation support (image sequences)
3D animated titles (and effects)
SVG friendly, to create and include vector titles and credits
Scrolling motion picture credits
Advanced Timeline (including Drag & drop scrolling, panning, zooming, and snapping)
Frame accuracy (step through each frame of video)
Time-mapping and speed changes on clips (slow/fast, forward/backward, etc…)
Audio mixing and editing
Digital video effects, including brightness, gamma, hue, greyscale, chroma key, and many more!
Experimental hardware encoding and decoding (VA-API, NVDEC, D3D9, D3D11, VTB)
Import & Export widely supported formats (EDL, XML)
Render videos in many codecs and formats (based on FFmpeg)

Pros:

3D Titles
Curve-based Time Mapping
Non-linear Editor with Infinite Tracks
No Watermark
Frequent Update
Easy to Use
Multi-lingual

Cons:

Unstable Performance
Limited Editing Features
Less Powerful Hardware Acceleration
Obsolete Interface

Steps On How To Chroma Key In Openshot

To create a chroma key (e.g. greenscreen or bluescreen) in OpenShot, begin by importing the files you’re going to use.

Drag the file to be keyed onto Track 2 in the timeline, and the file to use as the background onto Track 1. The plan is to make the green part of the upper image transparent so the file underneath becomes visible.

Click the Effects tab, find the Chroma Key effect, and drag it onto the top file in the timeline. You will see a star appear on the file in the timeline.

Right-click the top file in the timeline and select Properties. In the Properties window, click the Effects tab and then click the Chroma Key effect.

Click the green-colored area next to the word “Key” (shown above) to bring up the Pick a Color window (shown below). Click the eyedropper tool and then click on a green part of the video image.

Click OK, then click Apply in the properties window. You should now be able to scrub through the timeline and see the effect in action.

iMovie

When you record a video against a green screen, you can make the background transparent and replace it with other video clips, graphics, or still images of your choice. It’s easy to overlay any footage with iMovie’s green screen effect. For example, you can transport yourself anywhere or appear in your favorite films.

The green Screen effect, also referred as the Chroma Key effect, is a simple way to combine two clips into one with impressive scenes. You can, for example, fly over a very high mountain. Green Screen is a background that is only one color, usually green. This could be another pure color, such as Blue or Pink. By dragging and dropping, you can apply a green screen video to another in iMovie. It’s incredibly simple to create stunning videos using the iMovie Green Screen effect.

Supported OS: macOS and iOS

Features:

Options to modify and enhance video color settings
Crop and rotate video clips
Stabilize shaky videos
Add video transitions
Change the speed of clips.
iMovie allows you to remove both green and blue screens

Pros:

Clean, elegant interface
Well optimized, responsive, and fast on modern Macs
Effects and titles are all top-notch—especially for a free program
Robust and useful interactions with other Apple products and software

Cons:

Doesn’t have some advanced features present in other applications, like 360 video or Multicam
Sometimes the efforts to keep the interface simple make finding a solution obtuse
The user interface is not customizable
Supports fewer export formats than some competing products

Steps On How To Chroma Key In iMovie

Open an empty project.
Select the background you would like to use.

Drag and drop the background video or image into the timeline.

Select the green screen footage you want to use.
Drag and drop it above the background.

Drag the edge of the background to make the background longer or shorter to match your green screen footage.

Click to select the green screen footage in the timeline
Select Green/Blue Screen from the drop-down menu that defaults to Cutaway above the left corner of the viewer window.

The green should now be removed to reveal the background behind it.

DA VINCI RESOLVE

Davinci Resolve has two versions including a full studio version which is available for $299. Because some professional tools, such as team collaboration and video noise reduction, cannot be used without a full license, the free program has a surprising number of features. The majority of the features included in the free version are adequate for professionals and hobbyists.

Although the Davinci Resolve program is regarded as a professional grade editor, it does include some advanced tools such as exporting, audio mastering, color correction, and more. The program is also useful for arranging audio and video clips, and it has a large selection of effects and filters. The additional color correction and adjustments available here can also aid in HDR support and produce more professional results when working with camera RAW data.

Davinci Resolve is also well-known for having one of the best color grading programs available. The outcome can be hugely potent when using the accessible chromakey tools. It doesn’t take much to figure out how to use this effect with the quick tutorial on board.

Supported OS: Mac and Windows

Features:

Options to modify and enhance video color settings
Crop and rotate video clips
Stabilize shaky videos
Add video transitions
Change the speed of clips.
iMovie allows you to remove both green and blue screens

Pros:

Clean, elegant interface
Well optimized, responsive, and fast on modern Macs
Effects and titles are all top-notch—especially for a free program
Robust and useful interactions with other Apple products and software

Cons:

Doesn’t have some advanced features present in other applications, like 360 video or Multicam
Sometimes the efforts to keep the interface simple make finding a solution obtuse
The user interface is not customizable
Supports fewer export formats than some competing products

Steps On How To Remove the Green Screen in DaVinci Resolve Inside the Color Tab

Step 1 – Add the Qualifier Tool & select the color

After you finish cutting the video, jump inside the “Color” tab and select the Qualifier Tool. Make sure you set the tool in “3D” mode to enable us to select a bigger range of the green spectrum.

Do this by simply selecting the fourth dot from the middle-upper area of the window or by selecting it from the drop-down mode selector situated in the window’s top-right corner.

After selecting the 3D mode for the Qualifier Tool, go ahead and select the range of green colors you want to remove by simply drawing lines on top of the screen, similar to the way I did in the image below.

Step 2 – Removing the color

As you can see in the small rectangle, Resolve did the keying, but it doesn’t know what to do with it because we didn’t specify. Right-click underneath the node, select “Add Alpha Output” and then link the node.

Yes, I know it will key out the subject and not the green screen. There is no problem. Go ahead and select the Revert button situated in the “Selection Range” window. Everything should be OK now.

Step 3 – Clean the edges

As you can surely notice, there are still some issues we have to address. In the hair area and on the outline of the subject, there is a noticeable green color spill. We don’t want that! On top of this, there will be many situations where you will still notice some noisy green pixels in the transparent area, around the corners of the screen, or the subject.

To get rid of these problems, we have to jump into the Qualifier window. Here, there are many settings you can play with to tweak the output. Most of the time, you will solve these problems by checking “Despill”, further selecting more of the greens and adding them to the Selection Range, or modifying the shrink, ”Black Clip” and “White Clip”.

Step 3 – Done

This is all for this method! Go ahead and add a background in the “Edit” mode and your job is done! Feel free to watch the video below, where I went through the same steps as above, but faster.

BEST PAID GREEN SCREEN SOFTWARE FOR BEGINNERS ON MAC

WEVIDEO

Supported OS: Windows, Mac, iOS, Android

This program, which costs only $4 per month, has extensive compatibility with nearly 20 different input and output formats. Most common input and output formats, such as NT 4.0, avi, 3gp, and others, are well represented.

If you want to do green screen options online but don’t want to install any software to access a full-featured video editor, this could be one of your best options.

WeVideo is a cloud-based video editing solution that is both powerful and simple to use. There’s a reason it’s one of the most popular online video editors out there. This includes options for photo animations, clip transformations, voiceovers, and more. You can also improve your video by using a variety of premium features such as screencasting, custom branding, and a wide range of free tracks that can be used with copyright-free music.

With this online editor, you can easily control almost everything in a video, from motion effects to green screen technology to scene transitions.

Features:

720p video resolution
Motion titles
Screencasting
WeVideo JumpStart
Cloud storage
Music library
Slow motion
Voiceover
Guilt in graphics
Customizable environment
Green screen
Advanced text editing
File & media manager
Multi-track editing and storyboard

Pros:

This is a multiplatform video editor that works with intense compatibility online. You can use it on almost any device.
The interface is also quite simple and it has some tools that are used by the pros as well as a format that most people can easily understand.
There is a full licensed library of songs with over 100 tracks you can use royalty-free.
The cloud storage also ensures that you can pick up a project on any device that you won’t. Cloud access anywhere gives you more time for efficiency and handling your workload.

Cons:

The program only currently supports 720 P resolution in some of the cheaper plans and there are limited minutes allowed with editing if you are only going to use the trial-free plan.

Steps On How To Chroma Key In WeVideo

When your WeVideo project is open, click on the clip that you wish to remove the green background from.

The video or image layer underneath the color-keyed clip will show through, as the background.

Click on the clip editor pencil icon.

Click on the eyedropper to choose the color you’re going to remove.

Click an area that is the color that you would like to remove.

CAMTASIA

Supported OS: Mac and Windows

Camtasia by Techsmith is a simple video editing and screen recording application. Camtasia, designed for beginners, allows users to create professional training videos quickly and easily.

Camtasia is a straightforward video editor and chroma key software (for basic green screen editing) that may meet your needs.

It is the ideal video editor for beginners with little knowledge to editing. It includes numerous features that make it simple to create professional videos, whether you are a student, business owner, or regular YouTube user looking to spice up their content.

Features:

Intuitive and easy-to-use interface.
The ability to upload videos straight from the application, via Dropbox or YouTube.
A wide range of built-in editing templates makes it easier for beginners to create professional-looking video content.
Screen recording options for capturing live demos and lectures.
Camtasia for Mac is also available, which makes it an ideal video editor for Apple users.

Pros:

Very easy to learn
Amazing screen capture feature
Impressive cursor effects
Interactivity features
Good asset library
Mobile version
Great customer service
Low cost

Cons:

Constant crashes and bugs
Limited customization
No keyframe tracking
Poor keyboard commands
Export issues

Steps On How To Chroma Key In Camtasia

1. Record a video with a green screen

Make sure the green screen fills up the whole background while recording.

After your video is recorded, it will be placed on your Timeline as the recorded Camera and Screen.

2. Remove the green

Use the Remove a Color tool from the Visual Effects section to remove the green in the background.

Under the properties on the right side, select the color drop-down menu and use the eyedropper tool to select the green color. (Tip: With the Eyedropper tool selected, click on the green part of your Green Screen to select that color for removal.)

Adjust the Tolerance and Softness to get a clean color removal.

Adjust the video

Adjust and move your now greenless recording to a desired size and position.

Lightworks

Supported OS: Mac, Windows 8.1, and Linux

Lightworks is ideal for creating real-time effects. The basic package includes free software with green screen editing capabilities. It makes changing the background of your videos simple and effective.

Lightworks provides access to professional-grade features that allow you to create visually appealing videos. The software is quick and adapts quickly to your needs, whether you are a beginner or a pro. It has a learning curve, but there is probably no tool out there that is easier to use once you get used to it.

It offers advanced effects that allow users to enhance videos in real time. You can use a variety of tools, including blurring, masking, and color grading.

You can instantly export videos to YouTube, Vimeo, and other platform services.

Features:

Works with a wide variety of video formats
Allows fast export to MPEG4/
Fully optimized to offer fast speeds
Multicam editing options
Realtime effects with the help of inbuilt presets
Advanced Boris FX Plugin
Boris Graffiti for text effects
Fully customizable interface
Options for real-time collaboration
Dedicated hardware support

Pros:

Real-time effects with 4K Editing
Keyboard shortcuts
Easy to share videos on the internet
Access to royalty-free audio and video content
Histogram tool and 32bit GPU precision
Lots of ready-to-use effects

Cons:

The Video Stabilization feature is missing
3D Video Editing is not supported
No Split and Merge features

Steps On How To Chroma Key In Lightworks

1. Record your video

First, you need a green or blue background to shoot against. As we’ll explain later, it doesn’t have to be a very specific shade, but it needs to be substantially different from the subject you’re shooting. You might have seen occasions when a weather presenter’s tie has appeared transparent during a broadcast. This is because the material was too close in color to the backdrop, or the key wasn’t quite set accurately enough.

You can make your backdrop using a sheet, or a large sheet of paper or card. If you’re planning to make videos frequently, there are inexpensive chromakey backdrops available that include a frame to hang the cloth from. If space is limited, collapsible screens are also available starting at around US$40. These screens are also handy for photography.

Good lighting is essential. You need to make sure that the screen is evenly lit so the color is consistent. It’s also important to ensure your subject is far enough from the screen to avoid shadows and color spills (when the blue or green backdrop reflects off your subject).

2. Import and trim

Once you’ve shot your video, download and install Lightworks . It’s free for personal use, but you’ll need to register for a free account if you want to use it for longer than 30 days.

Click the button marked Create a New Project, give it a name, and select a frame rate (you can find this by right-clicking your recorded video and selecting the Details tab). Here we’re using a still image as a background, but you can also use another video. Import this the same way.

Click the Edit tab and drag your video from the Project Contents panel onto the V1 track of the timeline below. If there’s unwanted footage at the beginning or end of your clip, right-click it and select Trim In or Trim Out, then use the yellow handles to change where the clip starts and finishes.

Right-click the preview window marked Sequence #1 and select Tracks > Add Video. Drag your video clip into the V1 track and your still image into V2. Click and drag the right-hand side of the image in the V2 track until it’s the same length as the video.

3. Set the key

Now click the VFX tab, select the V1 track in the timeline and click the tab marked with a plus icon. Click the Favorites drop-down menu and select Key, followed by Green Screen. Click Add Effect and you’ll see a new panel of settings under the color correction wheels.

Use the eyedropper tool on the left to select the background you want to remove. This will typically do quite a good job by itself, but it will need a little fine-tuning. Try sliding the Saturation and Luminance sliders and adjusting their steepness using the handles that appear when you move your mouse over them. You’ll notice that each adjustment you make has a knock-on effect on the changes you’ve made with the other sliders; it’s a matter of balancing all three to achieve the best effect, preserving detail while minimizing spill.

To see how the filter is working, click the ‘Reveal’ box. The white areas are the parts of the video that will be removed, and the black areas are the parts that will remain.

The Remove Spill slider will add a purple tint to neutralize green tones in areas that need it.

4. Tweak and export

Once you’re happy, you can use Lightworks’ other VFX tools to make other changes like color correction and cropping. When you’re done, return to the Edit tab, right-click the preview window at the top right and select Export.

The only two export options you’ll see in the free version of Lightworks are Vimeo and YouTube, but this is a little misleading. These will save the video to your PC or Mac in an MP4 format, but they won’t do the uploading for you unless you check the appropriate box.

Select a destination folder and name for your video file and click ‘Start’. The processing will begin, and you’ll see a progress bar at the top right. This task will run in the background so you can continue working on your project, and you’ll be notified when it’s complete.

WHICH SHOULD I CHOOSE: FREE OR PAID GREEN SCREEN SOFTWARE?

If you want something quick, cheap, and easy, and having your footage seems to be fairly clean with few shadows or spills, there are several cheap or free apps into which you can import a clip, apply a chroma key, and export without much editing or advanced features.

If your footage calls for attention, extra equipment can be required. If your clip has inconsistent lighting fixtures or poor quality, you may require equipment that permits you to observe a couple of chroma keys to suit the numerous shades of green or color correction equipment to restore your pictures. For even advanced functions, you’ll want to spend a little time and money learning, however the end result will most possibly be worthwhile. More advanced chroma key equipment are normally used inside full-featured NLEs through integrated equipment or expert plug-ins that encompass extra beneficial functions including advanced color correction, noise reduction, HDR (High Dynamic Range) color support, movement and keyframing, extra file layout and high-resolution support, and multi-camera editing.

FAQS ABOUT EDITING GREEN SCREEN

What is the most important thing when using a green screen?

When lighting your green screen, ensure there is even, soft light on the entirety of the green screen. This is crucial for a proper key. Many filmmakers overlook this essential part and focus on lighting the subject. However, be sure to use whatever lights you have to expose the green screen background evenly.

Why do filmmakers use green screens?

A green screen basically lets you drop in whatever background images you want behind the actors and/or foreground. It’s used in film production (and also in news and weather reports) to relatively simply place the desired background behind the subject/actor/presenter.

Why is a green screen not a different color?

The really short answer is that green screens are green because people are not green. For the effect to work, the background must use a color that isn’t used elsewhere in the shot – and green is nothing like human skin tone.

Conclusion:

Green screen video production is not difficult. Anyone, with the right tools can create green screen effects like a pro. Simply follow the precautions listed above and choose the software that best suits your needs.

Whether you’re making a professional film or a simple family video, I’m confident you’ll find something suitable among the options listed above.

Supported OS: Windows, Mac, iOS, Android

Filmora Video Editor has two modes based on your experience with video editing software. Users can use the easy mode or the full feature editor to access the program’s full focus.

The preview mode and music tracks available from the themes make it simple to enhance your video.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

4k Editing Support

Gif Support

Noise Removal

Color Tuning

Advanced Text Editor

Audio Mixer

Video Stabilization

Scene Detection

Audio Equalizer

Chroma Keying

Pros:

It can be a program that’s easy to master even if you have never used a video editing program before
There are plenty of visual effects and premade effects that can help you make a great looking video within a few minutes
The 4k video support is also helpful

Cons:

It does lack a few advanced features like the option for motion tracking, multi-camera support, and assistance with 360° videos

Steps On How To Chroma Key On Filmora

Click the “Import Media Files Here“ to import the background video and video with the green screen background into the media library. And then drag and drop the background video and green screen video to the video track in the timeline respectively.

Note: Ensure the video with green screen background is placed as the overlay video.

Right-click on the overlay video and find the “Green Screen“ option.

Click on “Green Screen“ and you’ll open the video editing panel. And the green screen background has been removed.

When you’re satisfied with the effect, you can click the “OK“ button to save the changes.

OPENSHOT

The multilingual platform, which was specifically designed for video editors, allows teams to adjust color contrasts and brightness, as well as add time.

Supported OS: Windows, macOS, Linux

Features:

Cross-platform (Linux, Mac, and Windows)
Support for many videos, audio, and image formats (based on FFmpeg)
Powerful curve-based Key frame animations
Desktop integration (drag and drop support)
Unlimited tracks/layers
Clip resizing, scaling, trimming, snapping, rotation, and cutting
Video transitions with real-time previews
Compositing, image overlays, watermarks
Title templates, title creation, sub-titles
2D animation support (image sequences)
3D animated titles (and effects)
SVG friendly, to create and include vector titles and credits
Scrolling motion picture credits
Advanced Timeline (including Drag & drop scrolling, panning, zooming, and snapping)
Frame accuracy (step through each frame of video)
Time-mapping and speed changes on clips (slow/fast, forward/backward, etc…)
Audio mixing and editing
Digital video effects, including brightness, gamma, hue, greyscale, chroma key, and many more!
Experimental hardware encoding and decoding (VA-API, NVDEC, D3D9, D3D11, VTB)
Import & Export widely supported formats (EDL, XML)
Render videos in many codecs and formats (based on FFmpeg)

Pros:

3D Titles
Curve-based Time Mapping
Non-linear Editor with Infinite Tracks
No Watermark
Frequent Update
Easy to Use
Multi-lingual

Cons:

Unstable Performance
Limited Editing Features
Less Powerful Hardware Acceleration
Obsolete Interface

Steps On How To Chroma Key In Openshot

To create a chroma key (e.g. greenscreen or bluescreen) in OpenShot, begin by importing the files you’re going to use.

Drag the file to be keyed onto Track 2 in the timeline, and the file to use as the background onto Track 1. The plan is to make the green part of the upper image transparent so the file underneath becomes visible.

Click the Effects tab, find the Chroma Key effect, and drag it onto the top file in the timeline. You will see a star appear on the file in the timeline.

Right-click the top file in the timeline and select Properties. In the Properties window, click the Effects tab and then click the Chroma Key effect.

Click the green-colored area next to the word “Key” (shown above) to bring up the Pick a Color window (shown below). Click the eyedropper tool and then click on a green part of the video image.

Click OK, then click Apply in the properties window. You should now be able to scrub through the timeline and see the effect in action.