Easy Steps to Create Intro Video with After Effects

It’s difficult to make an intro in After Effects. To start, you must have a natural beginning that will catch the

viewer’s attention in the film you’ve made right away. Then, you can improve the caliber of your intros by using built-in filters, transition effects, overlays, animation, and more! Therefore, we’re confident that this article will be helpful to you if you’ve been trying to learn how to create After Effects intros of the highest level. Continue reading to learn more.

Let’s start off!

1. Create a new composition for your intro

You must build up your video’s composition based on the output. You can upload the previously recorded video after choosing the composition and the runtime. Right-click again and select “Pre-compose” from the menu that appears. To make it simpler to find later, you can also rename your movie here.

The composition can then include a solid layer. Follow *Layer > New > Solid* to get to this option. Additionally,

you can choose a hue based on the type of video you want to make. Additionally, you may use the Text option to build text layers, which will allow you to split the words at different points in the document. You can edit each word separately when you break it into layers. Finally, you can move the text around and change the color of the reader to make it more appropriate for your films.

After Effects makes it incredibly simple to edit the text composition and import it into the timeline of the film.

A panel appears on the right after importing a text composition. Here, you can alter the text’s color, position,

and size.

2. Add the first transition layer

By include the transition layer, you may use After Effects’ effects templates to apply a variety of effects to your

videos. You can experiment with a variety of transition layers in After Effects before selecting the ideal one (CC Light Wipe is a popular choice).

You can modify the transition after applying it to the layer. For instance, you may decide to apply the second

key transition at a later period in the timeline and configure the first key transition to occur immediately at the start of the timeline. Setting the completion value is crucial since it will influence how long the word will remain displayed in the video.

3. Add the second transition layer

The transition effect you introduced in the first stage can either be maintained here, or you can select an

entirely different one. According to how long you want the text to be displayed, add the layer and adjust

completion. The reader is invisible when the completion value is set to 100%, or the word is said when it is set

to 0%.

A memory sketch

If you want to make a black-and-white video that is more interesting, the memory sketch is a great template to use. You can make a visually beautiful video with its outstanding text captions, fluid transitions, and excellent animations.

Toolkit for Instagram

These days, Instagram is a very popular social media site. Instagram is a platform where reels and videos

flourish, therefore you must make every effort to differentiate your video from the millions of others available.

The Instagram Toolkit template meets the standards of the social media network by being brief, clear, and

appealing.

Lighting sweep

A final transition effect, which can be found in the *Effects > Generate *section, must be added to the video in order to complete the effect. The final flourish can be added in the same way as the other keyframes. In this step, you can use the edge intensity, sweep intensity, and direction. This allows you to seamlessly combine the transition of words with lighting effects.

These are some quick and easy techniques to adding some intros to your videos that look professional. Let’s

also take a look at some well-known templates you may utilize to make perfect video intros. Because the initial few seconds of any video are so important, After Effects has put together some incredible templates that have a variety of video clips, images, text, sound effects, and music tracks. To produce the video you want, you must obtain the ideal template.

The Bottom Line

Utilizing templates will hasten your workflow even though it takes some time to become familiar with After

Effects’ various tools. To gain a feel for how After Effects functions, we advise playing around by adding some

clips and titles. When you do that, you will be well on your way to creating a fantastic intro for your upcoming

video project.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

How to Create a Dynamic Text Animation in Filmora — Step-By-Step

Preparation

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download and install the Filmora video editor . Just click the link, hit “Download”, and it will start automatically. Then, open a New Project.

Step 2

Click on the “Titles” tab and drag a Default Title to Track 2 on your Timeline.

Step 3

Double-click on it and change the font to anything you like. Then, enter the text in the box in front of you. While you’re here, you can also edit the text spacing and other features.

Step 4

Now, take a snapshot of the text. Then, double-click on the default title again and change the text to a single letter I. Once again, take a snapshot of this text and then delete the default title from the timeline.

You should have two snapshots in My Media now. One of them should say “FILMORA” and one with the letter “I”.

Step 5

Drag the “FILMORA” snapshot to track 2 and the “I” snapshot to track 3. Then, click on the “Zoom” button and set this to 50%.

Step 6

Double-click on the “I” snapshot from the timeline. Then, input these settings when the window pops up. After that, drag the Playhead 1 second and 15 frames further down the timeline. Then, double-click on the “I” snapshot again, and change the Y-axis value to 0.

Step 7

Copy the “I” snapshot track from the timeline. Then, paste it on Track 4. Next, double-click on this one and change the X-axis position to whichever letter you want. In this case, it’s the letter “M”. As for the Y-Axis, you can change it any way that suits you.

Step 8

Copy this process as often and with as many letters as you want. Then, when you’re done, export the title animation to your computer.

Step 9

Open a new project in Filmora and import the title animation we just created.

Step 10

Drag the custom title animation to Track 2 and drag any video background you have on Track 1.

Step 11

Double-click on the title track, go to the Video tab, and select “Lighten” from the Blending Mode tab.

Step 12

Shift the title clip from Track 2 to Track 3. Then, go to the Effects tab and drag the Dark Film effect to Track 1 on the timeline.

Step 13

Search for the “Blur” effect in the Effects tab. Then, drag “Square Blur” to Track 2 in the timeline.

Step 14

Select the “Cinema” effect from the Effects tab and drag it to Track 4. Double-click on it and change the border height to 0.10.

Step 15

Now, all left is to render the clip and review the final result.

Summary

What you’ve learned:

• Create a professional-level animated text in Filmora in 15 simple steps
• How to add a video background and cinematic effects to your animated title
• Adjust the settings of clips in the Filmora timeline

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download and install the Filmora video editor . Just click the link, hit “Download”, and it will start automatically. Then, open a New Project.

Step 2

Click on the “Titles” tab and drag a Default Title to Track 2 on your Timeline.

Step 3

Double-click on it and change the font to anything you like. Then, enter the text in the box in front of you. While you’re here, you can also edit the text spacing and other features.

Step 4

Now, take a snapshot of the text. Then, double-click on the default title again and change the text to a single letter I. Once again, take a snapshot of this text and then delete the default title from the timeline.

You should have two snapshots in My Media now. One of them should say “FILMORA” and one with the letter “I”.

Step 5

Drag the “FILMORA” snapshot to track 2 and the “I” snapshot to track 3. Then, click on the “Zoom” button and set this to 50%.

Step 6

Double-click on the “I” snapshot from the timeline. Then, input these settings when the window pops up. After that, drag the Playhead 1 second and 15 frames further down the timeline. Then, double-click on the “I” snapshot again, and change the Y-axis value to 0.

Step 7

Copy the “I” snapshot track from the timeline. Then, paste it on Track 4. Next, double-click on this one and change the X-axis position to whichever letter you want. In this case, it’s the letter “M”. As for the Y-Axis, you can change it any way that suits you.

Step 8

Copy this process as often and with as many letters as you want. Then, when you’re done, export the title animation to your computer.

Step 9

Open a new project in Filmora and import the title animation we just created.

Step 10

Drag the custom title animation to Track 2 and drag any video background you have on Track 1.

Step 11

Double-click on the title track, go to the Video tab, and select “Lighten” from the Blending Mode tab.

Step 12

Shift the title clip from Track 2 to Track 3. Then, go to the Effects tab and drag the Dark Film effect to Track 1 on the timeline.

Step 13

Search for the “Blur” effect in the Effects tab. Then, drag “Square Blur” to Track 2 in the timeline.

Step 14

Select the “Cinema” effect from the Effects tab and drag it to Track 4. Double-click on it and change the border height to 0.10.

Step 15

Now, all left is to render the clip and review the final result.

Summary

What you’ve learned:

• Create a professional-level animated text in Filmora in 15 simple steps
• How to add a video background and cinematic effects to your animated title
• Adjust the settings of clips in the Filmora timeline

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download and install the Filmora video editor . Just click the link, hit “Download”, and it will start automatically. Then, open a New Project.

Step 2

Click on the “Titles” tab and drag a Default Title to Track 2 on your Timeline.

Step 3

Double-click on it and change the font to anything you like. Then, enter the text in the box in front of you. While you’re here, you can also edit the text spacing and other features.

Step 4

Now, take a snapshot of the text. Then, double-click on the default title again and change the text to a single letter I. Once again, take a snapshot of this text and then delete the default title from the timeline.

You should have two snapshots in My Media now. One of them should say “FILMORA” and one with the letter “I”.

Step 5

Drag the “FILMORA” snapshot to track 2 and the “I” snapshot to track 3. Then, click on the “Zoom” button and set this to 50%.

Step 6

Double-click on the “I” snapshot from the timeline. Then, input these settings when the window pops up. After that, drag the Playhead 1 second and 15 frames further down the timeline. Then, double-click on the “I” snapshot again, and change the Y-axis value to 0.

Step 7

Copy the “I” snapshot track from the timeline. Then, paste it on Track 4. Next, double-click on this one and change the X-axis position to whichever letter you want. In this case, it’s the letter “M”. As for the Y-Axis, you can change it any way that suits you.

Step 8

Copy this process as often and with as many letters as you want. Then, when you’re done, export the title animation to your computer.

Step 9

Open a new project in Filmora and import the title animation we just created.

Step 10

Drag the custom title animation to Track 2 and drag any video background you have on Track 1.

Step 11

Double-click on the title track, go to the Video tab, and select “Lighten” from the Blending Mode tab.

Step 12

Shift the title clip from Track 2 to Track 3. Then, go to the Effects tab and drag the Dark Film effect to Track 1 on the timeline.

Step 13

Search for the “Blur” effect in the Effects tab. Then, drag “Square Blur” to Track 2 in the timeline.

Step 14

Select the “Cinema” effect from the Effects tab and drag it to Track 4. Double-click on it and change the border height to 0.10.

Step 15

Now, all left is to render the clip and review the final result.

Summary

What you’ve learned:

• Create a professional-level animated text in Filmora in 15 simple steps
• How to add a video background and cinematic effects to your animated title
• Adjust the settings of clips in the Filmora timeline

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Download and install the Filmora video editor . Just click the link, hit “Download”, and it will start automatically. Then, open a New Project.

Step 2

Click on the “Titles” tab and drag a Default Title to Track 2 on your Timeline.

Step 3

Double-click on it and change the font to anything you like. Then, enter the text in the box in front of you. While you’re here, you can also edit the text spacing and other features.

Step 4

Now, take a snapshot of the text. Then, double-click on the default title again and change the text to a single letter I. Once again, take a snapshot of this text and then delete the default title from the timeline.

You should have two snapshots in My Media now. One of them should say “FILMORA” and one with the letter “I”.

Step 5

Drag the “FILMORA” snapshot to track 2 and the “I” snapshot to track 3. Then, click on the “Zoom” button and set this to 50%.

Step 6

Double-click on the “I” snapshot from the timeline. Then, input these settings when the window pops up. After that, drag the Playhead 1 second and 15 frames further down the timeline. Then, double-click on the “I” snapshot again, and change the Y-axis value to 0.

Step 7

Copy the “I” snapshot track from the timeline. Then, paste it on Track 4. Next, double-click on this one and change the X-axis position to whichever letter you want. In this case, it’s the letter “M”. As for the Y-Axis, you can change it any way that suits you.

Step 8

Copy this process as often and with as many letters as you want. Then, when you’re done, export the title animation to your computer.

Step 9

Open a new project in Filmora and import the title animation we just created.

Step 10

Drag the custom title animation to Track 2 and drag any video background you have on Track 1.

Step 11

Double-click on the title track, go to the Video tab, and select “Lighten” from the Blending Mode tab.

Step 12

Shift the title clip from Track 2 to Track 3. Then, go to the Effects tab and drag the Dark Film effect to Track 1 on the timeline.

Step 13

Search for the “Blur” effect in the Effects tab. Then, drag “Square Blur” to Track 2 in the timeline.

Step 14

Select the “Cinema” effect from the Effects tab and drag it to Track 4. Double-click on it and change the border height to 0.10.

Step 15

Now, all left is to render the clip and review the final result.

Summary

What you’ve learned:

• Create a professional-level animated text in Filmora in 15 simple steps
• How to add a video background and cinematic effects to your animated title
• Adjust the settings of clips in the Filmora timeline

Detailed Tutorial to Merge Videos in VLC Media Player

Sometimes, when working on a project, we really need to combine several videos - this way some content needs to be conveyed, there are shots that, when neatly sorted and merged together, really create visual and content value which we aspire to make; The process becomes more enjoyable if we work on the videos produced by ourselves, or if the work is to be done for our side project. People always take special care of their own work, and the same can be emphasized freely about the editing as well - about the packaging with which we have to deliver our videos to the audience. Even in the absence of an audience, maybe we want to make a kind of video collage for ourselves, our children, or in general, for the family to make delightful memories?

Of course, not everyone who has taken a camera or a mobile phone to take videos at least one time, even so, for family and friends, has the experience of editing and making various manipulations. However, the function of merging videos in various editing programs or on online platforms is so simple that it can be learned in just a few minutes, without the help of other people, and with a kind of small, though very useful result at the same time.

One of the programs where videos can be uploaded is VLC Media Player, which is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It can play multimedia files directly from extractable devices or the PC. The program is unique, as it can stream from popular websites like Disney +, Hulu, Gaia, and Netflix. VLC Multimedia Player also accepts live video from PlayStation Live, Xbox Live, Facebook, Twitter, and YouTube. While most competing programs display advertisements, VLC Player does not, as it receives support from a non-profit organization.

Interestingly, we can, as though with the help of a magic wand, turn this particular video player into video editing software. When one computer program delivers too many functions, it might make us think of the situation where one person claims to serve ten professions at the same time - there is a mood that they will not be good in any of them. It’s not true with VLC Player, which, from experience, seems to be both a good “player” as well as a fairly user-friendly editing software with many interesting features and functions.

Before we move on to video streaming, let’s look at two features that we can use in VLC player:

• Rotate a video in VLC

In the player, right when our video clip starts to play, we may find that the footage is taken vertically instead of horizontally! This is not a nightmare just for video enthusiasts. If you don’t know how to rotate the video, then you have to rotate your head 90 degrees, and at this time you can not even get pleasure from watching, not to mention that it can even cause your neck to lock up. VLC Player took care of that - in the top panel, just click on Tools, then select Effects & Filters. In the opened window, we find Video Effects, select Geometry and check the Rotate option - so, the whole 360 degrees are at our disposal!

• Cut/trim video

Sometimes it happens that we watch the video, we are crazy about one part of it, and the other part of it seems to spoil everything! Even if we are ready to publish the raw material on social media or just save it for ourselves, we just don’t want some parts of the video to be there. So, it can be said - we are not satisfied with the full version and we wish to cut our clip and/or reduce its timeframe. VLC Player solves this problem “without any problem” - we find the View in the top panel, then we demand the cursor to aim for Advanced Controls button. As a result, a sort of video editor will appear, with its red record button on which we will click and the video will play until we reach the point where we want to split the footage. The cut video will be automatically saved in My Computer’s My Video folder.

How to Merge Multiple Videos in VLC Media Player

Here we are, now the main topic of interest of this article - how to put together several videos so that they become one? This case, unlike other possibilities we discussed above, is more complicated, so we will study this feature step by step .

Technique one:

• Step one:

Open VLC media player.

Probably, you have already decided exactly which files you want to merge, so choose Open Multiple Files…

In the opened window, click on Add in the File tab.

Select the desired clips from the newly opened window (selecting order matters, because it dictates which clips will come first and which ones will be next in the finished version), then click Open.

• Step two:

The selected videos are shown in the File Selection list. At the bottom of the window, click the Arrow button next to the Play button, where you need to select Convert.

In the Profile, it is desirable to specify the following format: Video - + MP3 (MP4), and below you can choose the Destination file - the location where you want to save the merged video. Also, to find the edited video easily, check the following: Append ‘-converted’ to file name. Click on Start. Wait until it is done - then you can play the video.

Technique two:

• Create a New Folder and move the videos that you would like to merge Rename the videos (e.g. to 1, 2 etc.).

• Create a new text file. Copy and paste this line below:

vlc_location video1.mp4 video2.mp4 –sout “#gather:std{access=file,dst=final_file_name.mp4}” –sout-keep

• Type VLC in the taskbar search and right-click on the app. Choose Open File location.

Right-click on the app and choose Properties. A new window will be opened, where you need to go to Target. Select and copy the line.

Go to the text document file. Remove vlc_location and paste the copied text instead. Change the names of the video to match the names in the folder.

• Open the folder with videos. Click on the address line. Type cmd and press Enter.

sA new window will open. Cope the line from the text file and paste it into cmd window; then, click on Enter.

• VLC player will open and will play the merged video file.

An Easier Way to Merge Videos in A Few Clicks

It’s true that merging videos in VLC Media Player takes quite a few steps, so to speak. But is this the only editing program in which a similar operation can be performed? Of course not. Therefore, in our article, we decided to offer you an alternative, where you can also easily merge the videos. This is the famous Filmora Video Editor , a software that is one of the easiest and most convenient to work with, especially for those who want to edit videos without having much experience in “complicated” software before. So again, step by step guideline on how to put together our video clips in Wondershare Filmora.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

• Open the program.
• Choose Import Media Files Here.

• Choose your

• We can click and drag, essentially, “insert” a video in a sequence below. The Linear Timeline allows us to understand exactly when a video clip ends and when a new one starts.

• Accordingly, we can make one video “sit” next to another. If we want or need it, we will add the third video clip, fourth, and so on.

• We can view the entire video and save the video afterwards.
• Start to save video - we make sure the result is exactly what we wanted, find the Export button above the timeline and click on it.

• In the opened window, on the left side, to be precise, if we observe well, we can already choose in which format we want to save our clip. On the right we can indicate what name we want to give to our video; The location where we want to store it; Also, we see the resolution (which we can modify freely after clicking on Settings); Size; Duration.

• In Settings, we can decide how much quality the video should have, how many kbps will be the Bit Rate, how many fps the Frame Rate should be, etc., but most likely, beginners will not need to change all this.

• After selecting everything, right-click on the Export button in the lower right corner of the window and the program will start saving the material.

Filmora 9, though, works a little differently.

• In the Import dropdown menu, select Import with instant cutting tool…

This will open the Filmora Instant Cutter window with two options - Trim and Merge. Since we need Merge in this case, this is what we choose.

• Then Open File, which will allow you to select multiple clips. Select the desired video clips and to Import, click Open.

• The window will show the files we selected and the entire video, and to save it, we click on Export.

• Specify File name, Save to (location), When done - the latter is what the program should do after the material is exported, e.g. open the containing folder. The export window also shows the approximate size of the footage.

• After hitting on Ok, the project will be saved, which will happen very quickly, since the program does not decode and encode the material.

That’s it! In this article, we have tried to teach you how to use VLC Media Player as a video editor software, what features we can use and, most importantly, how to merge multiple videos in this dual program; We also learned an alternative way of how we can combine different video clips with the help of Wondershare Filmora. The choice is yours, the main thing is to know all the alternatives and find the most time and energy saving, preferable option for you personally!

Interestingly, we can, as though with the help of a magic wand, turn this particular video player into video editing software. When one computer program delivers too many functions, it might make us think of the situation where one person claims to serve ten professions at the same time - there is a mood that they will not be good in any of them. It’s not true with VLC Player, which, from experience, seems to be both a good “player” as well as a fairly user-friendly editing software with many interesting features and functions.

Before we move on to video streaming, let’s look at two features that we can use in VLC player:

• Rotate a video in VLC

In the player, right when our video clip starts to play, we may find that the footage is taken vertically instead of horizontally! This is not a nightmare just for video enthusiasts. If you don’t know how to rotate the video, then you have to rotate your head 90 degrees, and at this time you can not even get pleasure from watching, not to mention that it can even cause your neck to lock up. VLC Player took care of that - in the top panel, just click on Tools, then select Effects & Filters. In the opened window, we find Video Effects, select Geometry and check the Rotate option - so, the whole 360 degrees are at our disposal!

• Cut/trim video

Sometimes it happens that we watch the video, we are crazy about one part of it, and the other part of it seems to spoil everything! Even if we are ready to publish the raw material on social media or just save it for ourselves, we just don’t want some parts of the video to be there. So, it can be said - we are not satisfied with the full version and we wish to cut our clip and/or reduce its timeframe. VLC Player solves this problem “without any problem” - we find the View in the top panel, then we demand the cursor to aim for Advanced Controls button. As a result, a sort of video editor will appear, with its red record button on which we will click and the video will play until we reach the point where we want to split the footage. The cut video will be automatically saved in My Computer’s My Video folder.

How to Merge Multiple Videos in VLC Media Player

Here we are, now the main topic of interest of this article - how to put together several videos so that they become one? This case, unlike other possibilities we discussed above, is more complicated, so we will study this feature step by step .

Technique one:

• Step one:

Open VLC media player.

Probably, you have already decided exactly which files you want to merge, so choose Open Multiple Files…

In the opened window, click on Add in the File tab.

Select the desired clips from the newly opened window (selecting order matters, because it dictates which clips will come first and which ones will be next in the finished version), then click Open.

• Step two:

The selected videos are shown in the File Selection list. At the bottom of the window, click the Arrow button next to the Play button, where you need to select Convert.

In the Profile, it is desirable to specify the following format: Video - + MP3 (MP4), and below you can choose the Destination file - the location where you want to save the merged video. Also, to find the edited video easily, check the following: Append ‘-converted’ to file name. Click on Start. Wait until it is done - then you can play the video.

Technique two:

• Create a New Folder and move the videos that you would like to merge Rename the videos (e.g. to 1, 2 etc.).

• Create a new text file. Copy and paste this line below:

vlc_location video1.mp4 video2.mp4 –sout “#gather:std{access=file,dst=final_file_name.mp4}” –sout-keep

• Type VLC in the taskbar search and right-click on the app. Choose Open File location.

Right-click on the app and choose Properties. A new window will be opened, where you need to go to Target. Select and copy the line.

Go to the text document file. Remove vlc_location and paste the copied text instead. Change the names of the video to match the names in the folder.

• Open the folder with videos. Click on the address line. Type cmd and press Enter.

sA new window will open. Cope the line from the text file and paste it into cmd window; then, click on Enter.

• VLC player will open and will play the merged video file.

An Easier Way to Merge Videos in A Few Clicks

It’s true that merging videos in VLC Media Player takes quite a few steps, so to speak. But is this the only editing program in which a similar operation can be performed? Of course not. Therefore, in our article, we decided to offer you an alternative, where you can also easily merge the videos. This is the famous Filmora Video Editor , a software that is one of the easiest and most convenient to work with, especially for those who want to edit videos without having much experience in “complicated” software before. So again, step by step guideline on how to put together our video clips in Wondershare Filmora.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

• Open the program.
• Choose Import Media Files Here.

• Choose your

• We can click and drag, essentially, “insert” a video in a sequence below. The Linear Timeline allows us to understand exactly when a video clip ends and when a new one starts.

• Accordingly, we can make one video “sit” next to another. If we want or need it, we will add the third video clip, fourth, and so on.

• We can view the entire video and save the video afterwards.
• Start to save video - we make sure the result is exactly what we wanted, find the Export button above the timeline and click on it.

• In the opened window, on the left side, to be precise, if we observe well, we can already choose in which format we want to save our clip. On the right we can indicate what name we want to give to our video; The location where we want to store it; Also, we see the resolution (which we can modify freely after clicking on Settings); Size; Duration.

• In Settings, we can decide how much quality the video should have, how many kbps will be the Bit Rate, how many fps the Frame Rate should be, etc., but most likely, beginners will not need to change all this.

• After selecting everything, right-click on the Export button in the lower right corner of the window and the program will start saving the material.

Filmora 9, though, works a little differently.

• In the Import dropdown menu, select Import with instant cutting tool…

This will open the Filmora Instant Cutter window with two options - Trim and Merge. Since we need Merge in this case, this is what we choose.

• Then Open File, which will allow you to select multiple clips. Select the desired video clips and to Import, click Open.

• The window will show the files we selected and the entire video, and to save it, we click on Export.

• Specify File name, Save to (location), When done - the latter is what the program should do after the material is exported, e.g. open the containing folder. The export window also shows the approximate size of the footage.

• After hitting on Ok, the project will be saved, which will happen very quickly, since the program does not decode and encode the material.

That’s it! In this article, we have tried to teach you how to use VLC Media Player as a video editor software, what features we can use and, most importantly, how to merge multiple videos in this dual program; We also learned an alternative way of how we can combine different video clips with the help of Wondershare Filmora. The choice is yours, the main thing is to know all the alternatives and find the most time and energy saving, preferable option for you personally!

Interestingly, we can, as though with the help of a magic wand, turn this particular video player into video editing software. When one computer program delivers too many functions, it might make us think of the situation where one person claims to serve ten professions at the same time - there is a mood that they will not be good in any of them. It’s not true with VLC Player, which, from experience, seems to be both a good “player” as well as a fairly user-friendly editing software with many interesting features and functions.

Before we move on to video streaming, let’s look at two features that we can use in VLC player:

• Rotate a video in VLC

In the player, right when our video clip starts to play, we may find that the footage is taken vertically instead of horizontally! This is not a nightmare just for video enthusiasts. If you don’t know how to rotate the video, then you have to rotate your head 90 degrees, and at this time you can not even get pleasure from watching, not to mention that it can even cause your neck to lock up. VLC Player took care of that - in the top panel, just click on Tools, then select Effects & Filters. In the opened window, we find Video Effects, select Geometry and check the Rotate option - so, the whole 360 degrees are at our disposal!

• Cut/trim video

Sometimes it happens that we watch the video, we are crazy about one part of it, and the other part of it seems to spoil everything! Even if we are ready to publish the raw material on social media or just save it for ourselves, we just don’t want some parts of the video to be there. So, it can be said - we are not satisfied with the full version and we wish to cut our clip and/or reduce its timeframe. VLC Player solves this problem “without any problem” - we find the View in the top panel, then we demand the cursor to aim for Advanced Controls button. As a result, a sort of video editor will appear, with its red record button on which we will click and the video will play until we reach the point where we want to split the footage. The cut video will be automatically saved in My Computer’s My Video folder.

How to Merge Multiple Videos in VLC Media Player

Here we are, now the main topic of interest of this article - how to put together several videos so that they become one? This case, unlike other possibilities we discussed above, is more complicated, so we will study this feature step by step .

Technique one:

• Step one:

Open VLC media player.

Probably, you have already decided exactly which files you want to merge, so choose Open Multiple Files…

In the opened window, click on Add in the File tab.

Select the desired clips from the newly opened window (selecting order matters, because it dictates which clips will come first and which ones will be next in the finished version), then click Open.

• Step two:

The selected videos are shown in the File Selection list. At the bottom of the window, click the Arrow button next to the Play button, where you need to select Convert.

In the Profile, it is desirable to specify the following format: Video - + MP3 (MP4), and below you can choose the Destination file - the location where you want to save the merged video. Also, to find the edited video easily, check the following: Append ‘-converted’ to file name. Click on Start. Wait until it is done - then you can play the video.

Technique two:

• Create a New Folder and move the videos that you would like to merge Rename the videos (e.g. to 1, 2 etc.).

• Create a new text file. Copy and paste this line below:

vlc_location video1.mp4 video2.mp4 –sout “#gather:std{access=file,dst=final_file_name.mp4}” –sout-keep

• Type VLC in the taskbar search and right-click on the app. Choose Open File location.

Right-click on the app and choose Properties. A new window will be opened, where you need to go to Target. Select and copy the line.

Go to the text document file. Remove vlc_location and paste the copied text instead. Change the names of the video to match the names in the folder.

• Open the folder with videos. Click on the address line. Type cmd and press Enter.

sA new window will open. Cope the line from the text file and paste it into cmd window; then, click on Enter.

• VLC player will open and will play the merged video file.

An Easier Way to Merge Videos in A Few Clicks

It’s true that merging videos in VLC Media Player takes quite a few steps, so to speak. But is this the only editing program in which a similar operation can be performed? Of course not. Therefore, in our article, we decided to offer you an alternative, where you can also easily merge the videos. This is the famous Filmora Video Editor , a software that is one of the easiest and most convenient to work with, especially for those who want to edit videos without having much experience in “complicated” software before. So again, step by step guideline on how to put together our video clips in Wondershare Filmora.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

• Open the program.
• Choose Import Media Files Here.

• Choose your

• We can click and drag, essentially, “insert” a video in a sequence below. The Linear Timeline allows us to understand exactly when a video clip ends and when a new one starts.

• Accordingly, we can make one video “sit” next to another. If we want or need it, we will add the third video clip, fourth, and so on.

• We can view the entire video and save the video afterwards.
• Start to save video - we make sure the result is exactly what we wanted, find the Export button above the timeline and click on it.

• In the opened window, on the left side, to be precise, if we observe well, we can already choose in which format we want to save our clip. On the right we can indicate what name we want to give to our video; The location where we want to store it; Also, we see the resolution (which we can modify freely after clicking on Settings); Size; Duration.

• In Settings, we can decide how much quality the video should have, how many kbps will be the Bit Rate, how many fps the Frame Rate should be, etc., but most likely, beginners will not need to change all this.

• After selecting everything, right-click on the Export button in the lower right corner of the window and the program will start saving the material.

Filmora 9, though, works a little differently.

• In the Import dropdown menu, select Import with instant cutting tool…

This will open the Filmora Instant Cutter window with two options - Trim and Merge. Since we need Merge in this case, this is what we choose.

• Then Open File, which will allow you to select multiple clips. Select the desired video clips and to Import, click Open.

• The window will show the files we selected and the entire video, and to save it, we click on Export.

• Specify File name, Save to (location), When done - the latter is what the program should do after the material is exported, e.g. open the containing folder. The export window also shows the approximate size of the footage.

• After hitting on Ok, the project will be saved, which will happen very quickly, since the program does not decode and encode the material.

That’s it! In this article, we have tried to teach you how to use VLC Media Player as a video editor software, what features we can use and, most importantly, how to merge multiple videos in this dual program; We also learned an alternative way of how we can combine different video clips with the help of Wondershare Filmora. The choice is yours, the main thing is to know all the alternatives and find the most time and energy saving, preferable option for you personally!

Interestingly, we can, as though with the help of a magic wand, turn this particular video player into video editing software. When one computer program delivers too many functions, it might make us think of the situation where one person claims to serve ten professions at the same time - there is a mood that they will not be good in any of them. It’s not true with VLC Player, which, from experience, seems to be both a good “player” as well as a fairly user-friendly editing software with many interesting features and functions.

Before we move on to video streaming, let’s look at two features that we can use in VLC player:

• Rotate a video in VLC

In the player, right when our video clip starts to play, we may find that the footage is taken vertically instead of horizontally! This is not a nightmare just for video enthusiasts. If you don’t know how to rotate the video, then you have to rotate your head 90 degrees, and at this time you can not even get pleasure from watching, not to mention that it can even cause your neck to lock up. VLC Player took care of that - in the top panel, just click on Tools, then select Effects & Filters. In the opened window, we find Video Effects, select Geometry and check the Rotate option - so, the whole 360 degrees are at our disposal!

• Cut/trim video

Sometimes it happens that we watch the video, we are crazy about one part of it, and the other part of it seems to spoil everything! Even if we are ready to publish the raw material on social media or just save it for ourselves, we just don’t want some parts of the video to be there. So, it can be said - we are not satisfied with the full version and we wish to cut our clip and/or reduce its timeframe. VLC Player solves this problem “without any problem” - we find the View in the top panel, then we demand the cursor to aim for Advanced Controls button. As a result, a sort of video editor will appear, with its red record button on which we will click and the video will play until we reach the point where we want to split the footage. The cut video will be automatically saved in My Computer’s My Video folder.

How to Merge Multiple Videos in VLC Media Player

Here we are, now the main topic of interest of this article - how to put together several videos so that they become one? This case, unlike other possibilities we discussed above, is more complicated, so we will study this feature step by step .

Technique one:

• Step one:

Open VLC media player.

Probably, you have already decided exactly which files you want to merge, so choose Open Multiple Files…

In the opened window, click on Add in the File tab.

Select the desired clips from the newly opened window (selecting order matters, because it dictates which clips will come first and which ones will be next in the finished version), then click Open.

• Step two:

The selected videos are shown in the File Selection list. At the bottom of the window, click the Arrow button next to the Play button, where you need to select Convert.

In the Profile, it is desirable to specify the following format: Video - + MP3 (MP4), and below you can choose the Destination file - the location where you want to save the merged video. Also, to find the edited video easily, check the following: Append ‘-converted’ to file name. Click on Start. Wait until it is done - then you can play the video.

Technique two:

• Create a New Folder and move the videos that you would like to merge Rename the videos (e.g. to 1, 2 etc.).

• Create a new text file. Copy and paste this line below:

vlc_location video1.mp4 video2.mp4 –sout “#gather:std{access=file,dst=final_file_name.mp4}” –sout-keep

• Type VLC in the taskbar search and right-click on the app. Choose Open File location.

Right-click on the app and choose Properties. A new window will be opened, where you need to go to Target. Select and copy the line.

Go to the text document file. Remove vlc_location and paste the copied text instead. Change the names of the video to match the names in the folder.

• Open the folder with videos. Click on the address line. Type cmd and press Enter.

sA new window will open. Cope the line from the text file and paste it into cmd window; then, click on Enter.

• VLC player will open and will play the merged video file.

An Easier Way to Merge Videos in A Few Clicks

It’s true that merging videos in VLC Media Player takes quite a few steps, so to speak. But is this the only editing program in which a similar operation can be performed? Of course not. Therefore, in our article, we decided to offer you an alternative, where you can also easily merge the videos. This is the famous Filmora Video Editor , a software that is one of the easiest and most convenient to work with, especially for those who want to edit videos without having much experience in “complicated” software before. So again, step by step guideline on how to put together our video clips in Wondershare Filmora.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

• Open the program.
• Choose Import Media Files Here.

• Choose your

• We can click and drag, essentially, “insert” a video in a sequence below. The Linear Timeline allows us to understand exactly when a video clip ends and when a new one starts.

• Accordingly, we can make one video “sit” next to another. If we want or need it, we will add the third video clip, fourth, and so on.

• We can view the entire video and save the video afterwards.
• Start to save video - we make sure the result is exactly what we wanted, find the Export button above the timeline and click on it.

• In the opened window, on the left side, to be precise, if we observe well, we can already choose in which format we want to save our clip. On the right we can indicate what name we want to give to our video; The location where we want to store it; Also, we see the resolution (which we can modify freely after clicking on Settings); Size; Duration.

• In Settings, we can decide how much quality the video should have, how many kbps will be the Bit Rate, how many fps the Frame Rate should be, etc., but most likely, beginners will not need to change all this.

• After selecting everything, right-click on the Export button in the lower right corner of the window and the program will start saving the material.

Filmora 9, though, works a little differently.

• In the Import dropdown menu, select Import with instant cutting tool…

This will open the Filmora Instant Cutter window with two options - Trim and Merge. Since we need Merge in this case, this is what we choose.

• Then Open File, which will allow you to select multiple clips. Select the desired video clips and to Import, click Open.

• The window will show the files we selected and the entire video, and to save it, we click on Export.

• Specify File name, Save to (location), When done - the latter is what the program should do after the material is exported, e.g. open the containing folder. The export window also shows the approximate size of the footage.

• After hitting on Ok, the project will be saved, which will happen very quickly, since the program does not decode and encode the material.

That’s it! In this article, we have tried to teach you how to use VLC Media Player as a video editor software, what features we can use and, most importantly, how to merge multiple videos in this dual program; We also learned an alternative way of how we can combine different video clips with the help of Wondershare Filmora. The choice is yours, the main thing is to know all the alternatives and find the most time and energy saving, preferable option for you personally!

Knowing All Ways To Slow Down Video With Adobe Premiere Pro

Play with time and craft an epic action sequence in videos. Speed ramping is a technique that video editors use for this purpose. You might be thinking that it’s a simple slow-motion effect, but it’s slightly different. In reality, speed ramping is the process of ensuring a smoother transition in speed of scenes. Countless movies and sports videos use slow and fast motion for several reasons.

Premiere Pro Slow Motion allows creative expression in videos. To do so, editors rely on Adobe Premiere Pro software for well-crafted videos. Careful editing is required to maintain continuity and cohesiveness in clips through motion Adobe. This article will guide you on how to use slow motion on Adobe Premiere. Explore this feature and all the necessary details for a polished video outlook.

Slow Motion Video Maker Slow your video’s speed with better control of your keyframes to create unique cinematic effects!

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1: Explaining the Slow-Motion Feature of Adobe Premiere Pro

Adobe Premiere Pro is a video editing software part of Adobe Creative Suite. Professional editors and beginners both use this tool to make their content creative. Whether you are reworking a previous art piece or a new project, it can alter colors for good. You can insert background music, animations, and other forms of multimedia using Adobe.

Among its limitless features is a speed-ramping or slow-motion function. To unlock Adobe Premiere slow-motion in detail, you can head into the below details:

• Using this option, you can adjust the speed of the video as required. For instance, if you set it to 50%, your video will play at half speed compared to the original clips.
• Apart from the speed, users can adjust the duration of slow motion. This adjustment delivers a stylized and customized look to your clips.
• Make the slow-motion transition smoother with the optical flow feature. It can intelligently generate new frames to make your clips look like shots at a higher frame rate.
• Not all clips are worth slowing down, so there are many frame rates to do this. You can set the frame rate from 30fps, 120fps, 240fps, and 960fps.

Part 2: Understanding the Operations of Performing Slow Motion on Adobe Premiere Pro

If you want to perform speed ramping in videos, first access Adobe Premiere Pro. Many users find video editing difficult in Adobe. For their ease, this section will explain the slow-mo Adobe Premiere in simple steps:

Step 1

After getting into the Adobe Premiere Pro, enter to its editing screen. Import your video clip and move towards its timeline section. There, right-click on the FX icon and choose “Time Remapping” to go to “Speed.” Now, you can see the white speed ramping line.

Step 2

Add the keyframe by clicking the left-side circle icon next to the speed ramping line. Zoom in the section and add another keyframe.

Step 3

Click on the middle of the keyframe and pull it down slowly. To add a slow ramp instead of an abrupt change in speed, hit on the start and drag towards the right. Repeat the same to the other end of the keyframe. You can see a slow shift in speed. Later, you can adjust the speed and the ramp.

Part 3: What Are Some Potential Disadvantages of Using Adobe Premiere Pro for Performing Such Operations?

Many people might initially find the above steps intense and difficult to understand. Slow motion in Premiere Pro is useful in speed ramping, but you can face some issues using it. As everything has some bad side, this operation also does. You should read forward and know such disadvantages to avoid any inconvenience:

• Playback Lagging: Adobe causes lagging and major issues in playback. If you don’t use optical flow and render frames freeze, you cannot make any speed ramps.
• System Compatibility Issues: Speed ramping requires a system with a good GPU. Otherwise, problems might occur when it doesn’t interact well with the computer’s GPU.
• Complex Processing: This feature will interrupt your workflow if you are not a professional editor. As you will have to watch several tutorial videos to use just one feature.
• Frame Rate Adjustment Problems: Premiere Pro can show bugs if you use a high frame rate. It will start troubling when you use 120fps slow motion in clips.

Generally, it also requires strong computer specs and uses RAM of at least 8GB. The majority of editors look for an alternative due to its high learning curve and system requirements.

Part 5: Wondershare Filmora: Comprehending the Best Ways to Slow Down Videos

In search of a substitute, there could be many options on the internet. If someone is looking for easy-to-use software, they should use Wondershare Filmora . This video editor is the real game changer in adjusting speed ramping without laggings. Surprisingly, it does not require system requirements, and you can quickly launch it.

Filmora uses AI for a smooth optical flow compared with Adobe Premiere slow motion. It also ensures high quality and optimization of videos. With new AI features, you don’t need any help from experts, as AI can do it for you.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step-by-Step Guide to Slow Down Video Using Filmora

If you want more creative slow-motion videos, then keep reading. Here, you will find the easiest way to slow down videos in Filmora:

Step 1Install Filmora and Import Your Project in the Timeline

Launch the Filmora 13 in your system within simple steps. Access its main interface and hit the “New Project” button. Enter the editing window and import your project. Press the “Ctrl + I” keys from your keyboard to import the video. Browse the video and click “Open” to bring the video to Filmora. Then, drag and drop the video in the timeline section.

Step 2Explore Speed Ramping to Make Videos Super Slow

Place your cursor on the video and right-click on it. From the list, choose “Speed Ramping” and navigate toward the right-side panel. There, tap on “Customize” to open the further settings. Look for the “AI Frame Interpolation” and expand it to choose the “Optical Flow” option. You can adjust the speed manually from the graphical section on the right.

Step 3Get Render Review and Look for Export Button

Go to the timeline section toolbar for a smoother playback. Explore the “Render Preview” icon next to a green robotic icon. Finally, you can click the “Export” button at the top right corner to shift the video to your computer.

Conclusion

To conclude, speed ramping is a unique way to slow down video scenes. In this regard, professional video editors prefer Adobe Premiere Pro Slow Motion. On the contrary, this software is not a good choice for beginners and non-tech persons. That’s where Wondershare Filmora can make the process easier for all users. The plus point is it ensures quality with dedicated customization.

Make A Slow Motion Video Make A Slow Motion Video More Features

Part 1: Explaining the Slow-Motion Feature of Adobe Premiere Pro

Adobe Premiere Pro is a video editing software part of Adobe Creative Suite. Professional editors and beginners both use this tool to make their content creative. Whether you are reworking a previous art piece or a new project, it can alter colors for good. You can insert background music, animations, and other forms of multimedia using Adobe.

Among its limitless features is a speed-ramping or slow-motion function. To unlock Adobe Premiere slow-motion in detail, you can head into the below details:

• Using this option, you can adjust the speed of the video as required. For instance, if you set it to 50%, your video will play at half speed compared to the original clips.
• Apart from the speed, users can adjust the duration of slow motion. This adjustment delivers a stylized and customized look to your clips.
• Make the slow-motion transition smoother with the optical flow feature. It can intelligently generate new frames to make your clips look like shots at a higher frame rate.
• Not all clips are worth slowing down, so there are many frame rates to do this. You can set the frame rate from 30fps, 120fps, 240fps, and 960fps.

Part 2: Understanding the Operations of Performing Slow Motion on Adobe Premiere Pro

If you want to perform speed ramping in videos, first access Adobe Premiere Pro. Many users find video editing difficult in Adobe. For their ease, this section will explain the slow-mo Adobe Premiere in simple steps:

Step 1

After getting into the Adobe Premiere Pro, enter to its editing screen. Import your video clip and move towards its timeline section. There, right-click on the FX icon and choose “Time Remapping” to go to “Speed.” Now, you can see the white speed ramping line.

Step 2

Add the keyframe by clicking the left-side circle icon next to the speed ramping line. Zoom in the section and add another keyframe.

Step 3

Click on the middle of the keyframe and pull it down slowly. To add a slow ramp instead of an abrupt change in speed, hit on the start and drag towards the right. Repeat the same to the other end of the keyframe. You can see a slow shift in speed. Later, you can adjust the speed and the ramp.

Part 3: What Are Some Potential Disadvantages of Using Adobe Premiere Pro for Performing Such Operations?

Many people might initially find the above steps intense and difficult to understand. Slow motion in Premiere Pro is useful in speed ramping, but you can face some issues using it. As everything has some bad side, this operation also does. You should read forward and know such disadvantages to avoid any inconvenience:

• Playback Lagging: Adobe causes lagging and major issues in playback. If you don’t use optical flow and render frames freeze, you cannot make any speed ramps.
• System Compatibility Issues: Speed ramping requires a system with a good GPU. Otherwise, problems might occur when it doesn’t interact well with the computer’s GPU.
• Complex Processing: This feature will interrupt your workflow if you are not a professional editor. As you will have to watch several tutorial videos to use just one feature.
• Frame Rate Adjustment Problems: Premiere Pro can show bugs if you use a high frame rate. It will start troubling when you use 120fps slow motion in clips.

Generally, it also requires strong computer specs and uses RAM of at least 8GB. The majority of editors look for an alternative due to its high learning curve and system requirements.

Part 5: Wondershare Filmora: Comprehending the Best Ways to Slow Down Videos

In search of a substitute, there could be many options on the internet. If someone is looking for easy-to-use software, they should use Wondershare Filmora . This video editor is the real game changer in adjusting speed ramping without laggings. Surprisingly, it does not require system requirements, and you can quickly launch it.

Filmora uses AI for a smooth optical flow compared with Adobe Premiere slow motion. It also ensures high quality and optimization of videos. With new AI features, you don’t need any help from experts, as AI can do it for you.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step-by-Step Guide to Slow Down Video Using Filmora

If you want more creative slow-motion videos, then keep reading. Here, you will find the easiest way to slow down videos in Filmora:

Step 1Install Filmora and Import Your Project in the Timeline

Launch the Filmora 13 in your system within simple steps. Access its main interface and hit the “New Project” button. Enter the editing window and import your project. Press the “Ctrl + I” keys from your keyboard to import the video. Browse the video and click “Open” to bring the video to Filmora. Then, drag and drop the video in the timeline section.

Step 2Explore Speed Ramping to Make Videos Super Slow

Place your cursor on the video and right-click on it. From the list, choose “Speed Ramping” and navigate toward the right-side panel. There, tap on “Customize” to open the further settings. Look for the “AI Frame Interpolation” and expand it to choose the “Optical Flow” option. You can adjust the speed manually from the graphical section on the right.

Step 3Get Render Review and Look for Export Button

Go to the timeline section toolbar for a smoother playback. Explore the “Render Preview” icon next to a green robotic icon. Finally, you can click the “Export” button at the top right corner to shift the video to your computer.

Conclusion

To conclude, speed ramping is a unique way to slow down video scenes. In this regard, professional video editors prefer Adobe Premiere Pro Slow Motion. On the contrary, this software is not a good choice for beginners and non-tech persons. That’s where Wondershare Filmora can make the process easier for all users. The plus point is it ensures quality with dedicated customization.

Also read: