How to Create Chroma Key Written Text Effects in Filmora

Did you know it only takes a few clicks to key out the color in Filmora? It means that you can add green screen effects to many other objects. This article will show a cool chroma key effect you can try using written text.

Part 1. What Is Chroma Key Text Effect?

Composing of the chroma key effect is widely used in the gaming and newscasting industries. In this technique, you can make layering images and videos for the text together based on color hues.

Video editors can eliminate the basis from a picture by automatically choosing a certain hue in post-production. An interactive animation results by adding different color schemes; it’s an easy way to make 3D motion videos.

To make the effects on text, we have to film the subject writing on white paper. For this, follow the below instructions:

Part 2. Filming Tips for Written Texts

To write a key text before adding the chroma effect, we have to film the writing process to understand your next project better. You can create your own by following these tips. We are just concluding a single example here.

Tip 1. A Pen and a White Paper

We need blank white paper with no boundaries and lines for writing a text. Because the chroma effect will embellish the other lines if present on paper. Make sure to choose a prominent color for writing a text.

We are using a purple color pen here for writing an essential text to make it more prominent, as shown below:

It all depends upon the contrast, and you can choose another color too but ensure that it’s more apparent during filming.

Tip 2. Different Color Paper

There are many chances that you don’t have only white paper in your studio, or your requirement is not going with a blank white sheet. Then you don’t need to worry because you can use different color papers too.

But always try to use clearer paper and a prominent pen or highlighter. See the below example of a different color paper with a different highlighter.

Note: Ensure that the colored pens have good contrast with colored paper. Don’t use dull color pens with bright color paper.

Tip 3. Camera Angles

While filming a writing process for a video, you have to take care of the alignment of the camera. First, ensure the camera is at a suitable angle so it will not block the writing letters from the left side.

Sometimes, the writer’s hand blocks the letters on the left side during writing. Take note of this tip during filming a professional video, as shown below.

After checking the alignment of the camera, it’s time to look at what size we have to use for writing!

Tip 4. Larger Size of Letters

As we already said about the prominence of written text, we have to follow one more instruction related to the structure of the letters. Use the larger size and bold words when writing from a highlighter.

It is because the effect we insert during editing will be more standing and give a professional look to the video.

Note: You can create more shots till you get the right angle for a final video. Just focus on the camera alignment and highlighted words, then it will be all set.

After filming all the clips, you must edit those shots on the Filmora to get the chroma effect. Scroll more to get the step-by-step process!

Part 3. Editing the Chroma Key Text With Filmora

We need software that will give great setting choices and stock videos for a more professional look. For this, Wondershare Filmora will work more than a robot and give high-resolution results. To do the editing process on Filmora, follow the steps below and enjoy yourself with your followers.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora

Launch Wondershare Filmora on your PC or Mac after downloading.

Note: If you want to enjoy its unlimited effect, you get its premium version quickly.

Step2 Import the clips to the Filmora

First, import the best footage into the filmora which you have shot. Ensure that the clip should have the best recording angle and that every word will be prominent on the page.

For this, click on Import Media and choose from the PC library what you want to edit.

Step3 Drag the clip to the timeline

Drag and drop the clip into the timeline from the import section. If you have more clips, choose first according to your script.

Add the text-written clip into the second video track because we have to insert the background into the first video track later.

After inserting the clip into the timeline, it’s time to edit it. For this, keep following the below-mentioned steps!

Step4 Chroma key settings

To edit the chroma key, you need to open the settings. For this, follow the below instructions:

• First, double-click on the clip in the timeline of the Filmora.
• Then, the setting section of the video will pop up at the top left side.
• Mark the tick in front of the Chroma Key section, and it will show the list of different features as shown below.

Step5 Color key out

To key out the specific color for changing its background, you have to perform the following actions:

• First, find the Select color option in the settings of the clip.
• Then click on the color dropper in front of the color tab.
• After that, pick the color dropper and move it on the video to select the color from the text.

Note: Ensure to select the color from the middle of the text for better key-out accuracy.

You have to adjust the size and thickness after selecting the key-out. For this, follow the next step!

Step6 Adjust the settings

To adjust the Chroma Key’s settings, set the offset, tolerance, edge thickness, and edge feather. Increase or decrease according to your range and that suits you the best.

Then click on Alpha Channel to mark the tick in front of the option. It is due to that chroma key effects will be more clearly shown.

Now, it’s time to set the background after fixing all the settings of the chroma key effect. To perform this, scroll more to get to the next step.

Step7 Import background clips

You have to add an excellent motion background in the handwritten text video. For this, you must first import the background clip into the filmora. Then, click on Import Media and choose what you want from your PC.

Step8 Add a background clip to the timeline

After importing the background clip, now drag and drop the clip into the timeline. Finally, add the background clip to the first video track at the bottom.

Step9 Turn off the alpha channel

The last step is merging the background clip with the first clip. For this, follow the below guidelines:

• First, double-click on the handwritten text video.
• It will show the settings section at the top left corner.
• Find the chroma key section and turn Alpha Channel

Final Results

You have all done with the steps and got such a fascinating result. Following the above tricks, you can easily make your vlogs and daily videos more professional and creative. Make sure to add a great and colorful background clip.

You can also use any other motion video of scenes rather than colorful videos to give a striking look.

Conclusion

Create more attractive looks and share them with your subscribers. Mainly, vloggers can attract many viewers by making the introductory part with this effect. Then, choose hundreds of other videos from the stock media and create different looks daily.

See how you can get editing tricks on Wondershare Filmora and use them in a few clicks to get an attractive look!

Tip 3. Camera Angles

While filming a writing process for a video, you have to take care of the alignment of the camera. First, ensure the camera is at a suitable angle so it will not block the writing letters from the left side.

Sometimes, the writer’s hand blocks the letters on the left side during writing. Take note of this tip during filming a professional video, as shown below.

After checking the alignment of the camera, it’s time to look at what size we have to use for writing!

Tip 4. Larger Size of Letters

As we already said about the prominence of written text, we have to follow one more instruction related to the structure of the letters. Use the larger size and bold words when writing from a highlighter.

It is because the effect we insert during editing will be more standing and give a professional look to the video.

Note: You can create more shots till you get the right angle for a final video. Just focus on the camera alignment and highlighted words, then it will be all set.

After filming all the clips, you must edit those shots on the Filmora to get the chroma effect. Scroll more to get the step-by-step process!

Part 3. Editing the Chroma Key Text With Filmora

We need software that will give great setting choices and stock videos for a more professional look. For this, Wondershare Filmora will work more than a robot and give high-resolution results. To do the editing process on Filmora, follow the steps below and enjoy yourself with your followers.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Download and install Wondershare Filmora

Launch Wondershare Filmora on your PC or Mac after downloading.

Note: If you want to enjoy its unlimited effect, you get its premium version quickly.

Step2 Import the clips to the Filmora

First, import the best footage into the filmora which you have shot. Ensure that the clip should have the best recording angle and that every word will be prominent on the page.

For this, click on Import Media and choose from the PC library what you want to edit.

Step3 Drag the clip to the timeline

Drag and drop the clip into the timeline from the import section. If you have more clips, choose first according to your script.

Add the text-written clip into the second video track because we have to insert the background into the first video track later.

After inserting the clip into the timeline, it’s time to edit it. For this, keep following the below-mentioned steps!

Step4 Chroma key settings

To edit the chroma key, you need to open the settings. For this, follow the below instructions:

• First, double-click on the clip in the timeline of the Filmora.
• Then, the setting section of the video will pop up at the top left side.
• Mark the tick in front of the Chroma Key section, and it will show the list of different features as shown below.

Step5 Color key out

To key out the specific color for changing its background, you have to perform the following actions:

• First, find the Select color option in the settings of the clip.
• Then click on the color dropper in front of the color tab.
• After that, pick the color dropper and move it on the video to select the color from the text.

Note: Ensure to select the color from the middle of the text for better key-out accuracy.

You have to adjust the size and thickness after selecting the key-out. For this, follow the next step!

Step6 Adjust the settings

To adjust the Chroma Key’s settings, set the offset, tolerance, edge thickness, and edge feather. Increase or decrease according to your range and that suits you the best.

Then click on Alpha Channel to mark the tick in front of the option. It is due to that chroma key effects will be more clearly shown.

Now, it’s time to set the background after fixing all the settings of the chroma key effect. To perform this, scroll more to get to the next step.

Step7 Import background clips

You have to add an excellent motion background in the handwritten text video. For this, you must first import the background clip into the filmora. Then, click on Import Media and choose what you want from your PC.

Step8 Add a background clip to the timeline

After importing the background clip, now drag and drop the clip into the timeline. Finally, add the background clip to the first video track at the bottom.

Step9 Turn off the alpha channel

The last step is merging the background clip with the first clip. For this, follow the below guidelines:

• First, double-click on the handwritten text video.
• It will show the settings section at the top left corner.
• Find the chroma key section and turn Alpha Channel

Final Results

You have all done with the steps and got such a fascinating result. Following the above tricks, you can easily make your vlogs and daily videos more professional and creative. Make sure to add a great and colorful background clip.

You can also use any other motion video of scenes rather than colorful videos to give a striking look.

Conclusion

Create more attractive looks and share them with your subscribers. Mainly, vloggers can attract many viewers by making the introductory part with this effect. Then, choose hundreds of other videos from the stock media and create different looks daily.

See how you can get editing tricks on Wondershare Filmora and use them in a few clicks to get an attractive look!

Take Your Video Editing to the Next Level with Video Scopes

All video editors have been there. You edit and color-correct your video project only to find out that the final product is not what you expected. The contract and colors dramatically shift when viewed on a different device. In most cases, this is caused by improperly calibrated monitors, but it could also be your eyes playing tricks on you. Video scopes help in preventing this problem ensuring that the color in your video is consistent across devices. With video editing scope, you get the exact representation of the elements that make up your image, including lightness and color values. In this article, we explain what video scopes are and how you can use them in your editing projects.

Color Correction Editor An easy-to-use video editor helps you make color correction and color grading experience for videos!

Free Download Use Vectorscope in Filmora Try Color Correction

Part 1. Introduction to Video Scopes: What are They and Why You Should Use them

When grading and color correcting your videos, it is important to accurately assess your video signal. This allows you to know whether you’re crushing the blacks in the night shot or clipping the whites in the clouds. You also get to know the exact saturation and hue your logo has. Video scopes are simply monitoring tools and measurements that are used during video editing to analyze and optimize the technical quality of video signals.

Video scopes are important because your monitor may not be properly calibrated. It will likely give you inaccurate results and cannot be trusted with the video editing process. Since our eyes will naturally adapt to the image, they cannot be trusted either. However, video scopes never lie and will let you know the exact status of your video. In fact, the scope of video editing is beneficial in several ways:

• Increased Accuracy: Color correction and grading require accurate information that cannot be guaranteed by our eyes. Video scopes are highly accurate, confirming the true color and assuring you are making the correct adjustments
• Reliability: Video scopes provide reliable verification by ensuring you are not influenced by perception or what may appear as the right color grading.
• Professional Editing: The use of scopes in video editing is professional and allows you to make precise corrections of colors.
• Matching Color Between Shots: You can easily use video scopes to match your work and access various shots.

Video scopes are indeed useful in video editing. They give you the extra reassurance that your color grading and correction are accurate and representative of what you want. While they may sound intimidating for beginners, video scopes are a useful addition to video editing once you learn how to interpret them.

Part 2. Essential Video Scopes for Beginners: A List of the Most Common Ones

Scope in video editing can be a lifesaver, especially when you know what you are doing. Some are readily available for adjustment while recording, but the post-production ones are equally important. They ensure you are making the right adjustments without being interfered with by the appearance of your monitor. The scope of video editing ensures that our video will look the same across all devices. Here are the most commonly used video scopes:

• Waveform Scopes
• Histogram
• RGB Parade
• Vector Scopes

1. Waveform Scopes

Waveform video scope allows you to see how dark or light your image is. In other words, the waveform represents the luminance distribution across your image, allowing you to easily identify the bright and dark elements of your image. The lightness of the picture of the image is represented as a waveform. The rule of thumb is that black is 0 while white is 100 when you are editing HD. Levels below 0 at the bottom of the scope and those above 100 near the top of the scope will be clipped. So, you have to keep your levels within the 0-100 range, which is also the true Standard Dynamic Range (SDR) video. With Ultra-HD standard, the whites can go up to 10,000, which is the High Dynamic Range.

2. Histogram

The histogram video scope allows you to see the tonal value of your clip. Most people associate histograms with still photography, but it is also useful for video work. Specifically, the histogram represents the highlights, shadows, and midtones of your image. For a standard 8-bit image, pure white has a value of 255 while dark black has a value of 0. The histogram gives you the distribution of colored pixels in every value of lightness or darkness. Although other video scopes like the waveform and vectorscope will do much of the work, a histogram is still a useful measure in video editing.

3. RGB Parade

This is one of the most common post-production video scopes. The RGB parade allows you to see all three colors in one scope. It shows the waveform of the three colors side by side, and not on top of each other. This way, the RGB parade measures the saturation of the colors red, green, and blue in an image. It becomes clear which colors are more saturated compared to others in different areas of the image. To achieve a well-balanced image, keep each color within the lower and upper limits of the video scope. This ensures that the colors are not under or over-saturated.

4. Vector Scopes

This is another common visual post-production scope. It measures the color and color saturation of your image or video on a six-point color wheel. When working with vector scopes, you have two options to choose from: YUV and HLS vector scopes. The YUV vector scopes display the saturation and hue of the colors in the image on the circular graph. The colors in the graph include red, blue, magenta, yellow, and cyan-green. Color becomes more saturated the further it is from the center. On the other hand, the HLS vector scopes show saturation and hue, but in a more detailed picture of the number of pixels that fall into each area of the video scope.

Part 3. Unlock the Power of Video Scopes with Filmora

The use of scope in video editing will up your game and improve the overall quality of your videos. They give you an effective way of balancing and correcting colors. For pro video scopes for Mac and Windows, Wondashare Filmora is a great choice. The professional video editor comes with four types of video scopes that provide exceptional results. In addition to a histogram, Filmora V13 offers more options for color balancing and correcting. Let’s have a look at how to use video scopes on Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Using Video Scopes in Filmora

Filmora has made it easy for users to utilize video scopes in their editing projects. Once you have launched Filmora and started a New Project, video scopes are easily accessible via the highlighted icon.

The four video scopes offered by Filmora allow you to achieve specific color adjustments in your video projects. Let’s have a look at how each can be used in video editing.

1. Parade RGB

The parade RGB video scope is used to change the color channel of your visual images from RBG to YCbCr or YRGB. It displays the red, green, and blue channels of the video signal, which can be helpful when you are identifying areas of the video that are too dark or too bright. You can also use the parade to check the color balance of the video.

2. Waveform

The Waveform video scope in Filmora is used to adjust the color channels of your images or videos in different ways. It displays the brightness of the video signal, allowing you to heck the contrast level.

3. Vectorscope

The vectorscope helps to identify and adjust the skin tone of your subjects. It displays the color saturation of the video signal, helping you identify areas that are too saturated or desaturated. This way, you can easily check the skin tones in the video.

4. Histogram

The histogram, and video scope display multiple adjustments graphically while adjusting color channels. It displays the distribution of brightness values in the video, allowing you to check the overall brightness level.

Conclusion

Video scopes are important measures for tracing color elements when color correcting and enhancing your video. For an accurate and easy way of using video scopes in your projects, we highly recommend Wondershar Filmora. With the recent upgrades on Filmora, users now have access to pro video scopes that give you professional editing experience. Explore the four available video scopes, including waveform and Histogram. Parade, and vectorscope to achieve better color grading and quality of your videos.

Free Download Use Vectorscope in Filmora Try Color Correction

Part 1. Introduction to Video Scopes: What are They and Why You Should Use them

When grading and color correcting your videos, it is important to accurately assess your video signal. This allows you to know whether you’re crushing the blacks in the night shot or clipping the whites in the clouds. You also get to know the exact saturation and hue your logo has. Video scopes are simply monitoring tools and measurements that are used during video editing to analyze and optimize the technical quality of video signals.

Video scopes are important because your monitor may not be properly calibrated. It will likely give you inaccurate results and cannot be trusted with the video editing process. Since our eyes will naturally adapt to the image, they cannot be trusted either. However, video scopes never lie and will let you know the exact status of your video. In fact, the scope of video editing is beneficial in several ways:

• Increased Accuracy: Color correction and grading require accurate information that cannot be guaranteed by our eyes. Video scopes are highly accurate, confirming the true color and assuring you are making the correct adjustments
• Reliability: Video scopes provide reliable verification by ensuring you are not influenced by perception or what may appear as the right color grading.
• Professional Editing: The use of scopes in video editing is professional and allows you to make precise corrections of colors.
• Matching Color Between Shots: You can easily use video scopes to match your work and access various shots.

Video scopes are indeed useful in video editing. They give you the extra reassurance that your color grading and correction are accurate and representative of what you want. While they may sound intimidating for beginners, video scopes are a useful addition to video editing once you learn how to interpret them.

Part 2. Essential Video Scopes for Beginners: A List of the Most Common Ones

Scope in video editing can be a lifesaver, especially when you know what you are doing. Some are readily available for adjustment while recording, but the post-production ones are equally important. They ensure you are making the right adjustments without being interfered with by the appearance of your monitor. The scope of video editing ensures that our video will look the same across all devices. Here are the most commonly used video scopes:

• Waveform Scopes
• Histogram
• RGB Parade
• Vector Scopes

1. Waveform Scopes

Waveform video scope allows you to see how dark or light your image is. In other words, the waveform represents the luminance distribution across your image, allowing you to easily identify the bright and dark elements of your image. The lightness of the picture of the image is represented as a waveform. The rule of thumb is that black is 0 while white is 100 when you are editing HD. Levels below 0 at the bottom of the scope and those above 100 near the top of the scope will be clipped. So, you have to keep your levels within the 0-100 range, which is also the true Standard Dynamic Range (SDR) video. With Ultra-HD standard, the whites can go up to 10,000, which is the High Dynamic Range.

2. Histogram

The histogram video scope allows you to see the tonal value of your clip. Most people associate histograms with still photography, but it is also useful for video work. Specifically, the histogram represents the highlights, shadows, and midtones of your image. For a standard 8-bit image, pure white has a value of 255 while dark black has a value of 0. The histogram gives you the distribution of colored pixels in every value of lightness or darkness. Although other video scopes like the waveform and vectorscope will do much of the work, a histogram is still a useful measure in video editing.

3. RGB Parade

This is one of the most common post-production video scopes. The RGB parade allows you to see all three colors in one scope. It shows the waveform of the three colors side by side, and not on top of each other. This way, the RGB parade measures the saturation of the colors red, green, and blue in an image. It becomes clear which colors are more saturated compared to others in different areas of the image. To achieve a well-balanced image, keep each color within the lower and upper limits of the video scope. This ensures that the colors are not under or over-saturated.

4. Vector Scopes

This is another common visual post-production scope. It measures the color and color saturation of your image or video on a six-point color wheel. When working with vector scopes, you have two options to choose from: YUV and HLS vector scopes. The YUV vector scopes display the saturation and hue of the colors in the image on the circular graph. The colors in the graph include red, blue, magenta, yellow, and cyan-green. Color becomes more saturated the further it is from the center. On the other hand, the HLS vector scopes show saturation and hue, but in a more detailed picture of the number of pixels that fall into each area of the video scope.

Part 3. Unlock the Power of Video Scopes with Filmora

The use of scope in video editing will up your game and improve the overall quality of your videos. They give you an effective way of balancing and correcting colors. For pro video scopes for Mac and Windows, Wondashare Filmora is a great choice. The professional video editor comes with four types of video scopes that provide exceptional results. In addition to a histogram, Filmora V13 offers more options for color balancing and correcting. Let’s have a look at how to use video scopes on Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Using Video Scopes in Filmora

Filmora has made it easy for users to utilize video scopes in their editing projects. Once you have launched Filmora and started a New Project, video scopes are easily accessible via the highlighted icon.

The four video scopes offered by Filmora allow you to achieve specific color adjustments in your video projects. Let’s have a look at how each can be used in video editing.

1. Parade RGB

The parade RGB video scope is used to change the color channel of your visual images from RBG to YCbCr or YRGB. It displays the red, green, and blue channels of the video signal, which can be helpful when you are identifying areas of the video that are too dark or too bright. You can also use the parade to check the color balance of the video.

2. Waveform

The Waveform video scope in Filmora is used to adjust the color channels of your images or videos in different ways. It displays the brightness of the video signal, allowing you to heck the contrast level.

3. Vectorscope

The vectorscope helps to identify and adjust the skin tone of your subjects. It displays the color saturation of the video signal, helping you identify areas that are too saturated or desaturated. This way, you can easily check the skin tones in the video.

4. Histogram

The histogram, and video scope display multiple adjustments graphically while adjusting color channels. It displays the distribution of brightness values in the video, allowing you to check the overall brightness level.

Conclusion

Video scopes are important measures for tracing color elements when color correcting and enhancing your video. For an accurate and easy way of using video scopes in your projects, we highly recommend Wondershar Filmora. With the recent upgrades on Filmora, users now have access to pro video scopes that give you professional editing experience. Explore the four available video scopes, including waveform and Histogram. Parade, and vectorscope to achieve better color grading and quality of your videos.

How To Add Motion Blur In Davinci Resolve?

Do you want to give extra details to your object’s movements in a video? Motion blur effect can instantly add a natural effect to your videos by smoothening the lines and edges. It also adds a sense of action in a video quite dramatically.

Many professionals also say that motion blur creates a passage of time by crafting vibrant streaks of colors. So, if you want to add this dynamic effect, this article will help you. By reading this article, you can learn how to add motion blur in DaVinci Resolve using efficient ways.

Part 1: What is DaVinci Resolve?

DaVinci Resolve is an all-in-one software that includes various capabilities. Using this tool, you can effortlessly add effects, filters, visual graphics, and other elements. You can also use this professional software to color-correct your video by altering saturation, hue, contrast, and brightness. With new upgrades, DaVinci provides remote collaboration using Blackmagic Cloud. This will allow you to collaborate with multiple users efficiently.

You can find different tools on different pages of DaVinci. This flexibility and wide space will help you to execute video editing effortlessly. Furthermore, you can also create customizable keyboard shortcuts to increase your overall work efficiency. Thus, its highly professional software contains a wide range of media management, organization, and editing tools.

Part 2: How to Add Motion Blur to Videos in DaVinci Resolve?

DaVinci Resolve can professionally add a motion blur effect to your videos to smoothen the look. To use the DaVinci motion blur effect, there are two efficient ways. To learn about them in detail, read this part of the section carefully.

1. On the Fusion Page

DaVinci has separate pages, like the Fusion page, for different uses. If you want to learn how to add a motion blur effect on the fusion page, check the following instructions carefully.

What is the Fusion Page in DaVinci?

On the Fusion page, you can use captivating visual effects to add a new perspective to your videos. This page consists of a diverse range of motion graphics and visual effects. You can use retouching and repairing tools from the fusion page to generate a cinematic effect quickly.

So, by merging images, effects, and animations together, you can create a vibrant effect of your own efficiently. To add DaVinci Resolve motion blur on the fusion page, here are the simple steps:

Step1 Navigate to the DaVinci Resolve tool and upload your video. Now open the fusion page and press “Shift” and “Spacebar.” On the search box, type “Motion” and select “Motion Blur” from the results. After selecting it, tap on the “Add” button.

Step2 Now, you will be able to see a nod of Motion Blur on the interface. Drag this node to the center of “Media in” and “Media Out.” By selecting the motion blur node, you can adjust the settings from the right direction.

Step3 You can also remove the Motion Blur node to create more enhancements. After removing it, you have to add a “Background” and connect it to Media in and Media out nodes. Now merge the nodes and navigate to “Settings.” From the settings, you can check the box of motion blur and change its elements like quality, shutter angle, etc.

2. In the Edit Page

The Edit page in DaVinci Resolve provides you with complete freedom to add transitions, titles, and effects to the videos. On this page, you can replace, insert, overwrite and trim the clip effectively. Moreover, you can also add 2D and 3D titles to your videos on the edit page.

If you want to add a motion blur effect on DaVinci Resolve 17, you can instantly increase your work efficiency. The reason is that on DaVinci, you would be able to directly drag the motion blur effect on the editing area. Thus, it can increase your editing speed drastically. To add DaVinci motion blur on the editing page, read the below steps:

Step1 After accessing the DaVinci Resolve, open its edit page and upload the video. Once done, go to “Effects Library” and select “Open FX.” Now from the search bar, type “Motion Blur.” Select motion blur from the results and apply it to the timeline.

Step2 On the right side, select the “Effects” tab, and then you will be able to modify the motion range, motion blur value, and other elements.

Bonus Tips – Add Motion Blur with an Alternative to DaVinci Resolve

Do you want a better tool than DaVinci Resolve motion blur? Filmora is an easy-to-use tool that has a delightful and well-designed interface. Using this tool, you can effortlessly perform flawless editing on your videos without interruption. You can transitions and effects to your video to improve their visual appeal. You can also add audio clips to the video on this platform with great ease.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Apart from advanced functioning, you can also use Filmora to execute basic functions. For instance, you can cut, trim, split, merge, and crop your videos with high precision. Moreover, you can use its stock footage to create a dynamic video from scratch. Hence, it’s a complete professional software that can change the outlook of your video efficiently.

Steps to Add Motion Blur in Wondershare Filmora

Follow the steps described below to add the motion blur to your videos if you are a beginner in the video industry:

Step1 Create a New Filmora Project

After launching Filmora, hit the “Create New Project” button to open a new interface. On the project media, upload your desired media file and then drag it to the timeline.

Step2 Choose the Motion Blur Effect

Now go to the “Effects” tab and select the “Video Effects” category from the left panel. Now you will have to type “Blur” in the search bar to get all the blur effects of Filmora. Select your option and apply the effect to the timeline.

Step3 Add the Dissolve Transition

You can also add a transition known as “Dissolve” by searching for it in the “Transitions” tab to smoothen your video. You can see the final results in the preview window.

Conclusion

Have you ever added a motion blur effect to your videos? If you are unaware of how to create a professional motion blur effect, this article can provide you with complete guidance. In this article, we have used DaVinci Resolve to flawlessly add a motion blur effect. However, if you find the interface of DaVinci Resolve motion blur complicated, you can try its best alternative, Wondershare Filmora.

Free Download For macOS 10.14 or later

Apart from advanced functioning, you can also use Filmora to execute basic functions. For instance, you can cut, trim, split, merge, and crop your videos with high precision. Moreover, you can use its stock footage to create a dynamic video from scratch. Hence, it’s a complete professional software that can change the outlook of your video efficiently.

Steps to Add Motion Blur in Wondershare Filmora

Follow the steps described below to add the motion blur to your videos if you are a beginner in the video industry:

Step1 Create a New Filmora Project

After launching Filmora, hit the “Create New Project” button to open a new interface. On the project media, upload your desired media file and then drag it to the timeline.

Step2 Choose the Motion Blur Effect

Now go to the “Effects” tab and select the “Video Effects” category from the left panel. Now you will have to type “Blur” in the search bar to get all the blur effects of Filmora. Select your option and apply the effect to the timeline.

Step3 Add the Dissolve Transition

You can also add a transition known as “Dissolve” by searching for it in the “Transitions” tab to smoothen your video. You can see the final results in the preview window.

Conclusion

Have you ever added a motion blur effect to your videos? If you are unaware of how to create a professional motion blur effect, this article can provide you with complete guidance. In this article, we have used DaVinci Resolve to flawlessly add a motion blur effect. However, if you find the interface of DaVinci Resolve motion blur complicated, you can try its best alternative, Wondershare Filmora.

3 Ways to Make Time-Lapse Video on MacBook

The process of time-lapse speeds up the passage of time so that events seem to be happening faster. A time-lapse video is to create photos at regular intervals and assemble them into the video to record changes that would be slow for the human eye to see. Time-Lapse video shows the technique of slow-motion videos using the same principle.

Time-lapse is usually for several purposes but mostly it is utilized to show the passage of time in a fast-forward format. time-lapse means that the camera takes the picture and then combined them into one video that seems to something happen in quickly. The lapse is set into video form in post-production, so movie mode is not necessary. Once the lapse is finished, it’s time to take it into post-production to bring it to life.

Part 1. Use QuickTime Player to Create Timelapse Video

QuickTime player creates a high-resolution video file from the series of photos without having to render the photos twice. The result of QuickTime is a much higher quality result. With this toolkit, after the recording is done, the illusion of fast-moving footage i-e time-lapse is to be created. QuickTime will always ask you what frame rate would you like to video in.

Steps to Create Timelapse Video with QuickTime Player:

To produce a timelapse movie using QuickTime Player, follow these steps:

Step 1: Launch the Recording

By selecting the File * New Screen Recording option in QuickTime, you may record your screen. After choosing the region to record, your screen will start to be recorded. Real-time video will be captured, and it will be archived.

Step 2: Import the Files

Go to the file > Open Image Sequence menu after starting QuickTime. One of the video files you want to turn into a time-lapse should be opened in QuickTime Player. “Open File.” may be found by clicking the File menu link in the menu bar.

Step 3: Create the Timelapse

Within QuickTime, the series of images will be turned into time-lapse films. Choose one picture from the series, and then change the settings as necessary. Use the Higher Quality Apple Pro Resolution video codec, Actual size resolution, and 25 frames per second.

Step 4: Export Your Video

Finally, you may access the Speed option by selecting Tools>Edit from the top menu’s Imported section. At the conclusion, this will produce your time-lapse, and then choose Save under File. This will open a window where you can choose the codec you want to export it in.

Part 2. Create Timelapse Video with iMovie

To make an iMovie time-lapse on Mac, you have to capture the video and create a time-lapse out of it. For a multiple-hour recording in a few seconds to be fit, you will need software of time-lapse. Timelapse is utilized for accelerated or slow-motion videos with changes in the frame rate and playback videos in speed. The time-lapse software is available to handle the tasks without sacrificing the quality, size, and format of the video.

Steps To Create Timelapse Video with iMovie

Step 1: Launch iMovie

On your Mac, launch the iMovie application, and then import the video clip from the library that you wish to use to create a time-lapse. Drag the video to the timeline. Then you may see additional frames in the timeline by clicking the setting bar below.

Step 2: Import videos and adjust

By clicking the icon that resembles a camera below the Viewer panel, drag images into the project library. Drag the desired images to the Project Library. By choosing File and then selecting Project Properties, you may modify the default settings. Set the first picture location to Fit Frame and the transition length to 1 second.

Step 3: Modify the Clips’ Speed

Select it if you wish to alter the clip’s pace. On the preview window’s top toolbar, tap the clock symbol. You may pick “8x” for the default frame rate or “20x” for “Speed” > “Fast.” In iMovie, the minimum time is 0.1 seconds or around 10 frames. As a result, you must first export the time-lapse sequence before speeding up the clip.

Step 4: Share the Video

Using the Share option at the bottom, you can then save, export, or share your slowed-down time-lapse film. Refer to the “Share” option to decide whether to store or immediately share the iMovie time-lapse.

Part 3. Turn Video into Timelapse with Filmora

Time-Lapse videos can be easily created using Wondershare Filmora which is a very powerful video editing tool . The speed change feature of Filmora works well for time-lapse video editing. Filmora software can be used on both Windows and Mac platforms, it contains the features of a wide range of video effects with filters. it allows you to produce and create amazing video creations from images or video clips.

Filmora is packed with a plethora of editing features that will make your time lapses more appalling. The color tuning feature can be used to adjust the white balance and dynamic range of the video clips. The advanced text editor allows you to edit the size, font, color, and even the animation of text. The feature of video stabilization eliminates the effects of the camera shake. All in all, you can have an all-in-one editor to create your timelapse handily.

Wondershare Filmora Best Way to Make Timelapse Video on Computer.

Free Download Free Download Learn More

Steps to Create a Timelapse Video with Filmora:

Step 1: Launch Filmora Editor

Download the program and launch Filmora in full feature mode. Drag and drop the video clip into the application after selecting the Import option from the software’s menu. Drag the imported video clip to the timeline below, as seen in the figure above.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 2: Setup the Footage Speed

To adjust the speed, drag the video clip into the timeline by clicking twice, and then slide the speed tool to the desired speed for your time-lapse. The speed is changed to be 100 times faster.

Step 3: Render the Timelapse

The Render Timeline button is recognized by the window’s preview when you click it to guarantee the speed changes your clip has to be adjusted to. You would take off the audio that was in the original video. Utilizing the image’s visible volume tool button, change the volume and then render it again by hitting the render icon as shown here:

Step 4: Edit the Video

To change the perspective of the video to wherever you want it, click right on the video clip on the timeline and choose Crop & Zoom, followed by Pan & Zoom. Additionally, you may add text using the text and title tool that is already built-in, add music using royalty-free music files or apply filters and other features.

Step 5: Share your Timelapse

As you can see, you can drag and drop the pre-built templates from the library onto the timeline. Next, click the Export button at the top to start exporting. The Filmora’s features include support for 4K editing, GIF compatibility, noise reduction, color tuning, a sophisticated text editor, an audio mixer, video stabilization, scene identification, and audio equalization.

Conclusion

Time-lapse is the video editing technique in that the speed is lower and the frequency of video and picture. A time-lapse software, Filmora is a video editor that lets you create a smooth time-lapse where time appears to be passing quickly. This app is very helpful to create the video on time-lapse, making the appearance in the series of quick succession about a long term or period to denote something that happens over a long period.

Free Download Free Download Learn More

Steps to Create a Timelapse Video with Filmora:

Step 1: Launch Filmora Editor

Download the program and launch Filmora in full feature mode. Drag and drop the video clip into the application after selecting the Import option from the software’s menu. Drag the imported video clip to the timeline below, as seen in the figure above.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 2: Setup the Footage Speed

To adjust the speed, drag the video clip into the timeline by clicking twice, and then slide the speed tool to the desired speed for your time-lapse. The speed is changed to be 100 times faster.

Step 3: Render the Timelapse

The Render Timeline button is recognized by the window’s preview when you click it to guarantee the speed changes your clip has to be adjusted to. You would take off the audio that was in the original video. Utilizing the image’s visible volume tool button, change the volume and then render it again by hitting the render icon as shown here:

Step 4: Edit the Video

To change the perspective of the video to wherever you want it, click right on the video clip on the timeline and choose Crop & Zoom, followed by Pan & Zoom. Additionally, you may add text using the text and title tool that is already built-in, add music using royalty-free music files or apply filters and other features.

Step 5: Share your Timelapse

As you can see, you can drag and drop the pre-built templates from the library onto the timeline. Next, click the Export button at the top to start exporting. The Filmora’s features include support for 4K editing, GIF compatibility, noise reduction, color tuning, a sophisticated text editor, an audio mixer, video stabilization, scene identification, and audio equalization.

Conclusion

Time-lapse is the video editing technique in that the speed is lower and the frequency of video and picture. A time-lapse software, Filmora is a video editor that lets you create a smooth time-lapse where time appears to be passing quickly. This app is very helpful to create the video on time-lapse, making the appearance in the series of quick succession about a long term or period to denote something that happens over a long period.

Also read: