How to Color Grading in Final Cut Pro

Have you ever questioned the purpose of those odd video scopes or how to build super grades from the start in Final Cut Pro? In contrast to editing talents, color grading is a technical and difficult ability that takes practice.

In order to help, we decided to compile a thorough beginner’s article to color grading in Final Cut Pro.

With that said, let’s begin!

1. Discover how you color grade in Final Cut Pro

Color grading may be a tedious and time-consuming operation, therefore it’s a skill set that calls for a lot of patience. Some editors won’t conduct any color grading or correction beyond the bare minimum. But even mundane-looking film may look remarkable if you know how to give it a dramatic touch.

A more cinematic grade requires a number of procedures, and there is no one method that works for all situations. We’ll therefore walk you through the process of creating a cinematic color grade in Final Cut Pro, but depending on your material, you might need to add or omit some phases.

Step1Filming

Since the raw video is essential for producing a cinematic image, an outstanding grade begins with the camera.

Use the greatest quality settings your camera offers while recording your video; the more information in your picture, the more you can manipulate it during grading.

While it may seem preferable to shoot with as much color as you can, using a duller color profile is very necessary. Your camera will have color settings, and although the washed-out, drab appearance may not inspire confidence in you, it will offer you a lot more editing possibility.

Step2Create a color profile

After importing your film, you may be concerned about the general dull look of your recordings. The reason for that is because you have not yet matched the color profile of your sequence to the one of your camera. To start on this process, it goes as follows.

• Drag your clip onto your timeline and make sure it is selected. Click on the Inspector icon.
• Then click on the Information tab of the clip.
• Navigate all the way down through the options to find the Color LUT option.
• Then choose the Color profile that matches your clip based on the camera it is filmed with.
• You’re done!

Step3Checking the scopes

The Scopes in Final Cut Pro are panels that display the color information of your shots. They are quite complicated and can be difficult to comprehend if you did not use them ever before. You can activate Video Scopes by clicking View > Show in Viewer > Video Scopes from the View menu. The three components of grading are the highlights, mid-tones, and shadows. Your highlights are shown at the top and your shadows are at the bottom in all grading tools and scopes.

2. Include Color Wheels

Now that your setup is complete, you can begin grading your footage. Grading is done in multiple layers stacked on top of each other. It may take multiple levels to create the desired look. Follow the instructions below to modify your settings to match your clip if you want to give your footage a cinematic look.

You may access a wider range of color manipulation tools with the built-in color wheels, exposure adjustments, including isolation of color selection, RGB modifications across tone ranges, and simple masking.

3. Color board

A vertical color spectrum is shown on the Color Board, and it is intersected by a horizontal line that features four nodes. These are the ranges of the footage that are designated as the Highlights, Midtones, and Shadows, respectively.

Adjusting a node to a new color space has an immediate and noticeable impact on the corresponding section of the image. If you move above the horizontal line, it will increase, and if you go below the line, it will decrease.

You also have control over the Saturation and Exposure settings. These are wonderful to have if you want to increase the contrast in your photographs and make particular colors more vivid or muted.

4. Masks

Using the Shape Masks feature, each of these individual effects can be perfect for particular regions of your footage. In addition, by utilizing a Color Mask, you can alter the appearance of a specific color. It is possible to apply multiple iterations of each color adjustment to a clip and find it listed under the Effect heading.

The order can be changed by dragging and dropping, and either method can be disabled or enabled. Utilizing keyframes allows for the effects of color grading to be specifically timed as well. Last but not least, keep in mind that the quality and color sample depth of the clips determine how much of an overall adjustment you are capable of making to a color.

5. Color Curves

If you are experienced with more advanced picture editing software, such as Adobe Photoshop, you will benefit greatly from using color curves. Adjustments can be made independently to both the Luma (the brightest areas) and the primary composite colors (red, blue, and green).

6. Match Colors

Match Color is an additional choice that may be made from the improvement’s menu. This function will try to replicate the visual style of one video clip in another. First, choose the clip whose color you want to change, click on that clip that has the desired appearance, and last, choose Match Color.

You will still be able to utilize these settings as shortcuts even after you have gained more experience with manual grading and are comfortable making finer adjustments manually. It is important to keep in mind that while using Final Cut Pro X for color grading, effects can be layered on top of one another.

It’s not likely that a single tool or adjustment will solve an issue or produce the desired result; rather, it’s more likely that a number of different impacts will be required. In the same way that different visual effects in Final Cut Pro X may be toggled on and off, any layers that you add to a clip can have their visibility controlled from the Inspector window.

Conclusion

In Final Cut Pro X, you may choose from a wide variety of grading plugins, ranging from more affordable solutions like FCPeffects to more expensive ones like Magic Bullet Looks, which are designed specifically for feature film-style grades.

Additionally, there is a variety of stand-alone applications for color grading, such as DaVinci Resolve and FilmConvert. You might be comfortable with their gear, but you should also know that their professional-grade color package includes some rather complex editing options.

Beginning to experiment with all of Final Cut Pro X’s functions and determining which ones are most useful to you is the best method to gain an understanding of the program’s color grading capabilities. If you don’t currently have a project that requires your attention, you can download stock footage and experiment with it.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Steps to Create Makeup Videos

This topic is one of the videos you can easily find on YouTube, apart from the fact that it’s easy to make a video like this, there are many people who want to learn how to do their own makeup, that is why this is the most search content on YouTube. Makeup tutorial is effective through video, since viewers can see exactly how makeup are executed, what products they are using and where to buy.

This kind of video is about sharing makeup techniques, makeup inspiration and beauty product reviews. So, whether you are a makeup artist or a makeup enthusiast you can surely record yourself, make a video and share to your YouTube channel to inspire everyone to be beautiful on their own.

In this article I will sharing may setup and tips on how you can create a makeup video on your YouTube channel.

How to Setup for Making a Makeup Video

You don’t need to have expensive gear to start making this kind of content, also having a small space in your room, a smart phone and a natural lighting from your window is good enough to start your video. But if you are willing to invest there are a lot of online shop selling affordable gear for your great setup.

So, let’s take a look at some of the basic gears recommended:

Smart Phone / Camera

Right now, if you don’t have a digital camera yet, cellphone or mobile phone is good enough to start making your makeup video. This is the most convenient and affordable option for filming a makeup video. I’m sure now a days most of the camera built in mobile phone are quality for making a good video.

Cell Phone Stand

you must have a sturdy stand that allows to adjust height and rotation based on your needs.

If you don’t have a cell phone stand you can get anything that where you can put your camera on, but make sure that is just high enough that you can see your face for the tutorial.

External Mic / Lapel Mic

To ensure you have both video and audio quality, it’s advisable to use an external microphone to record the audio separately, but there is lapel microphone that you can connect directly to your mobile phone make sure to use lapel mic that is compatible to your phone.

Ring Light

As I said natural lighting that comes from your window is your best friend when it comes to your lighting set up. Just find a window that the sun is shining through and use that light to your advantage.

but if you are willing to invest to have a quality video, just go with Ring Light. This light provides a soft, radial glow and its even capable as natural daylight. So, you don’t have to worry about flickers or distorts when filming, as the ring provides a continuous stream of light. Because you know lighting is one of the crucial setups for making all videos, especially to a makeup tutorial videos. You can always buy an affordable ring light online.

Editing Software

Other than the camera and the video footage itself, the video editing software is the mores essential steps as a content creator. There are usually awkward moments during filming that you may want to edit out, and you may also need to add effects and interesting transition. You can use a video editor that you can download from google.

Wondershare Filmora is a free, one of the easy-to-use software that most content creator used as their editing software. Filmora has editing tools like animation, effects, color change, transition, and overlays to make your video attractive and stands out to others.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Ready or set up your studio

A studio can be a corner of a room or if you have an extra space, you can dedicate an entire room to be your filming studio. Then get your camera or smart phone set up on a stable table with your cellphone stand to make it sturdy and make sure you have a suitable lighting. Dark video is not useful to anyone specially for something as detailed as applying a makeup.

Step2Create an outline

It may be helpful to create an outline or a script of your video beforehand so that you remember to do all the things your intent to do in your tutorial. This can also help you stay on track during filming so that you are remembering to demonstrate every part of your tutorial. Making a makeup tutorial video need also a step-by-step process so that you don’t forget anything that you will put or show in the video, you need to make a note or an outline for you to remember all because it so hustles to go back and record what you missed.

Step3Prepare Your Makeup

Before recording, prepare your makeup and make sure you use clean brushes. Set up the makeup you intent to use on the table or on you vanity near your filming setup. Lay out all you makeup and products that you want to use in this video. Have your makeup in front of you so that they are easily accessible during filming.

Make sure to have this thing in front of you before filming

• Makeup Brushes
• Skin and Eye Primer
• Moisturizer
• Foundation and Concealer
• Loose or Setting Powder
• Eyebrows Pencil or powder
• Contouring Palette
• Eyeshadow Palette
• Highlight powder
• Lipstick
• Setting Spray

Step4Concentrate and Film

Usually before filming I pray for guidance and knowledge. This is essential to me I do it before filming so that I can be guided and finish what I’m doing properly and less struggle.

If you are done the you can now start filming. Used your script to start talking to the camera, remember to be happy mood while doing this tutorial. Make your viewers feel good while watching you and don’t forget to tell them what product you are using. Also leave some comment to where they can buy the product you are using on your video.

Step5Edit and Upload

This is the last step for making a makeup video. Edit your video properly and make your video creative to attract more viewers. Cut the unwanted clips especially the part where you’re just talking. Because sometime viewers get bored if they only see you talking. Create a nice animation or transition to make your video stands out.

Then upload your finish video to your Youtube channel, make sure to public and promote your video so that more viewers will see how great you are in making this kind of videos. Remember to share your video to all your social media account to have more viewers and subscribers, don’t be shy to tell also your family and friends that you made a video so they can see the finished product of your hard work video tutorial and ask them to leave comment and suggestion if you have anything else to change or fix in making video, because for us content creator people’s feedback is very important so we can do better next time.

The Bottom Line

Now that you already knew the gear that you need to start setting up your studio for your makeup video and you also knew the step-by-step process, you are now ready to film a makeup video. But remember this you can’t just put makeup on your face style your hair and end the video. As a beauty vlogger, you’re an entertainer, so open dialogue is essential when filming. Ask your audience what they want to see, more importantly always remember to ask for feedback because for us content creator viewers feedback is very important so we can do better next time.If you’ve just started this inspiring journey of becoming a beauty Youtuber then hopefully these tips on how to create a makeup video will helped.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Step1Ready or set up your studio

A studio can be a corner of a room or if you have an extra space, you can dedicate an entire room to be your filming studio. Then get your camera or smart phone set up on a stable table with your cellphone stand to make it sturdy and make sure you have a suitable lighting. Dark video is not useful to anyone specially for something as detailed as applying a makeup.

Step2Create an outline

It may be helpful to create an outline or a script of your video beforehand so that you remember to do all the things your intent to do in your tutorial. This can also help you stay on track during filming so that you are remembering to demonstrate every part of your tutorial. Making a makeup tutorial video need also a step-by-step process so that you don’t forget anything that you will put or show in the video, you need to make a note or an outline for you to remember all because it so hustles to go back and record what you missed.

Step3Prepare Your Makeup

Before recording, prepare your makeup and make sure you use clean brushes. Set up the makeup you intent to use on the table or on you vanity near your filming setup. Lay out all you makeup and products that you want to use in this video. Have your makeup in front of you so that they are easily accessible during filming.

Make sure to have this thing in front of you before filming

• Makeup Brushes
• Skin and Eye Primer
• Moisturizer
• Foundation and Concealer
• Loose or Setting Powder
• Eyebrows Pencil or powder
• Contouring Palette
• Eyeshadow Palette
• Highlight powder
• Lipstick
• Setting Spray

Step4Concentrate and Film

Usually before filming I pray for guidance and knowledge. This is essential to me I do it before filming so that I can be guided and finish what I’m doing properly and less struggle.

If you are done the you can now start filming. Used your script to start talking to the camera, remember to be happy mood while doing this tutorial. Make your viewers feel good while watching you and don’t forget to tell them what product you are using. Also leave some comment to where they can buy the product you are using on your video.

Step5Edit and Upload

This is the last step for making a makeup video. Edit your video properly and make your video creative to attract more viewers. Cut the unwanted clips especially the part where you’re just talking. Because sometime viewers get bored if they only see you talking. Create a nice animation or transition to make your video stands out.

Then upload your finish video to your Youtube channel, make sure to public and promote your video so that more viewers will see how great you are in making this kind of videos. Remember to share your video to all your social media account to have more viewers and subscribers, don’t be shy to tell also your family and friends that you made a video so they can see the finished product of your hard work video tutorial and ask them to leave comment and suggestion if you have anything else to change or fix in making video, because for us content creator people’s feedback is very important so we can do better next time.

The Bottom Line

Now that you already knew the gear that you need to start setting up your studio for your makeup video and you also knew the step-by-step process, you are now ready to film a makeup video. But remember this you can’t just put makeup on your face style your hair and end the video. As a beauty vlogger, you’re an entertainer, so open dialogue is essential when filming. Ask your audience what they want to see, more importantly always remember to ask for feedback because for us content creator viewers feedback is very important so we can do better next time.If you’ve just started this inspiring journey of becoming a beauty Youtuber then hopefully these tips on how to create a makeup video will helped.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Step1Ready or set up your studio

A studio can be a corner of a room or if you have an extra space, you can dedicate an entire room to be your filming studio. Then get your camera or smart phone set up on a stable table with your cellphone stand to make it sturdy and make sure you have a suitable lighting. Dark video is not useful to anyone specially for something as detailed as applying a makeup.

Step2Create an outline

It may be helpful to create an outline or a script of your video beforehand so that you remember to do all the things your intent to do in your tutorial. This can also help you stay on track during filming so that you are remembering to demonstrate every part of your tutorial. Making a makeup tutorial video need also a step-by-step process so that you don’t forget anything that you will put or show in the video, you need to make a note or an outline for you to remember all because it so hustles to go back and record what you missed.

Step3Prepare Your Makeup

Before recording, prepare your makeup and make sure you use clean brushes. Set up the makeup you intent to use on the table or on you vanity near your filming setup. Lay out all you makeup and products that you want to use in this video. Have your makeup in front of you so that they are easily accessible during filming.

Make sure to have this thing in front of you before filming

• Makeup Brushes
• Skin and Eye Primer
• Moisturizer
• Foundation and Concealer
• Loose or Setting Powder
• Eyebrows Pencil or powder
• Contouring Palette
• Eyeshadow Palette
• Highlight powder
• Lipstick
• Setting Spray

Step4Concentrate and Film

Usually before filming I pray for guidance and knowledge. This is essential to me I do it before filming so that I can be guided and finish what I’m doing properly and less struggle.

If you are done the you can now start filming. Used your script to start talking to the camera, remember to be happy mood while doing this tutorial. Make your viewers feel good while watching you and don’t forget to tell them what product you are using. Also leave some comment to where they can buy the product you are using on your video.

Step5Edit and Upload

This is the last step for making a makeup video. Edit your video properly and make your video creative to attract more viewers. Cut the unwanted clips especially the part where you’re just talking. Because sometime viewers get bored if they only see you talking. Create a nice animation or transition to make your video stands out.

Then upload your finish video to your Youtube channel, make sure to public and promote your video so that more viewers will see how great you are in making this kind of videos. Remember to share your video to all your social media account to have more viewers and subscribers, don’t be shy to tell also your family and friends that you made a video so they can see the finished product of your hard work video tutorial and ask them to leave comment and suggestion if you have anything else to change or fix in making video, because for us content creator people’s feedback is very important so we can do better next time.

The Bottom Line

Now that you already knew the gear that you need to start setting up your studio for your makeup video and you also knew the step-by-step process, you are now ready to film a makeup video. But remember this you can’t just put makeup on your face style your hair and end the video. As a beauty vlogger, you’re an entertainer, so open dialogue is essential when filming. Ask your audience what they want to see, more importantly always remember to ask for feedback because for us content creator viewers feedback is very important so we can do better next time.If you’ve just started this inspiring journey of becoming a beauty Youtuber then hopefully these tips on how to create a makeup video will helped.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Step1Ready or set up your studio

A studio can be a corner of a room or if you have an extra space, you can dedicate an entire room to be your filming studio. Then get your camera or smart phone set up on a stable table with your cellphone stand to make it sturdy and make sure you have a suitable lighting. Dark video is not useful to anyone specially for something as detailed as applying a makeup.

Step2Create an outline

It may be helpful to create an outline or a script of your video beforehand so that you remember to do all the things your intent to do in your tutorial. This can also help you stay on track during filming so that you are remembering to demonstrate every part of your tutorial. Making a makeup tutorial video need also a step-by-step process so that you don’t forget anything that you will put or show in the video, you need to make a note or an outline for you to remember all because it so hustles to go back and record what you missed.

Step3Prepare Your Makeup

Before recording, prepare your makeup and make sure you use clean brushes. Set up the makeup you intent to use on the table or on you vanity near your filming setup. Lay out all you makeup and products that you want to use in this video. Have your makeup in front of you so that they are easily accessible during filming.

Make sure to have this thing in front of you before filming

• Makeup Brushes
• Skin and Eye Primer
• Moisturizer
• Foundation and Concealer
• Loose or Setting Powder
• Eyebrows Pencil or powder
• Contouring Palette
• Eyeshadow Palette
• Highlight powder
• Lipstick
• Setting Spray

Step4Concentrate and Film

Usually before filming I pray for guidance and knowledge. This is essential to me I do it before filming so that I can be guided and finish what I’m doing properly and less struggle.

If you are done the you can now start filming. Used your script to start talking to the camera, remember to be happy mood while doing this tutorial. Make your viewers feel good while watching you and don’t forget to tell them what product you are using. Also leave some comment to where they can buy the product you are using on your video.

Step5Edit and Upload

This is the last step for making a makeup video. Edit your video properly and make your video creative to attract more viewers. Cut the unwanted clips especially the part where you’re just talking. Because sometime viewers get bored if they only see you talking. Create a nice animation or transition to make your video stands out.

Then upload your finish video to your Youtube channel, make sure to public and promote your video so that more viewers will see how great you are in making this kind of videos. Remember to share your video to all your social media account to have more viewers and subscribers, don’t be shy to tell also your family and friends that you made a video so they can see the finished product of your hard work video tutorial and ask them to leave comment and suggestion if you have anything else to change or fix in making video, because for us content creator people’s feedback is very important so we can do better next time.

The Bottom Line

Now that you already knew the gear that you need to start setting up your studio for your makeup video and you also knew the step-by-step process, you are now ready to film a makeup video. But remember this you can’t just put makeup on your face style your hair and end the video. As a beauty vlogger, you’re an entertainer, so open dialogue is essential when filming. Ask your audience what they want to see, more importantly always remember to ask for feedback because for us content creator viewers feedback is very important so we can do better next time.If you’ve just started this inspiring journey of becoming a beauty Youtuber then hopefully these tips on how to create a makeup video will helped.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Gimp Green Screen

Chroma key with gimp green screen is the method by which photographers (and videographers) use a monochromatic backdrop, then replace the blue or green “screen” with a virtual background. This is the method employed during every evening weather broadcast: the newscaster is standing in front of a blank screen, but the viewers at home see a weather map.

Green screen Chroma key can also be used with photography. Subjects can be photographed in front of a monochromatic screen, and a virtual background can be put behind the subject once the screen is removed. For example, a duck can be photographed in front of a green or blue tarp, which is then replaced by a photograph of a river.

Filmora Audio Recorder

Record computer system audio

Capture microphone audio

Customize recording volume

Record screen and webcam as well

Try It Free Try It Free

How to use green screen in gimp

If you take a picture with a solid colored background (blue or green works best), then you can have a computer program pull out the blue or green pixels and replace them with another color or a transparent layer. This process is called “chroma key” and is used in weather forecasts and other special effects. The terms “green screen” and “blue screen” also refer to the chroma key process.

These directions outlined below describe how to use GIMP to add a transparent layer and remove blue or green pixels from an image. This allows you to layer images on different backgrounds or use pictures as Sprites in Scratch or Greenfoot.

Brief outline of process:

1. Start GIMP
2. Open the picture file.
3. Create an “Alpha Channel” (Transparent Pixels)
4. Select “Like Colored Pixels” (Click on the Green or Blue background)
5. Control->K to delete the pixels and reveal the Transparent background.
6. Save the picture as a .gif file. (Not .jpg!)

Detailed Directions:

1. Start GIMP: (The “Gnu Image Manipulation Program”)
2. Click the “K” menu
3. Select “Graphics”
4. Select “GIMP Image Editor”

Note about the GIMP:

Most computer applications run in one window. GIMP will run different windows for each function or object you are working with. (Separate windows for paintbrush menus, images, backgrounds, etc . . .)

1. Select “File-> Open”
2. Navigate to your File Area and select a chroma key picture
3. Once your picture opens, add the “Alpha Channel”
   a. Select “Layer” from the picture menu bar
   b. Select “Transparency”
   c. Select “Add Alpha Channel”
4. Click the “Select Region by Color” icon.
5. Click once on the green or blue color in the background.
6. Press “Control -> K” on the keyboard to delete the colors. The background will appear as a gray checkerboard pattern.
7. Repeat the click and “Control-K” process to remove the background colors.
8. Once the background colors are removed, save the picture:
   a. Select “File-Save As” from the menu bar.
   b. Type “LastnamePicture.gif” as the filename.
9. Select “Convert to Indexed” - Click Export
10. Click “OK”
11. the picture should save.
12. You can now use this picture in Scratch for a sprite, or in other graphics projects to combine with backgrounds.

Best GIMP alternative to edit images

Krita

Krita is an application for image creation and image manipulation. We focus on painting, illustration, concept art and other creative work. This is a short an incomplete list of the most important features Krita provides.

Krita provides an OpenGL based canvas in addition to an unaccelerated canvas. Krita’s filters, histogram computation and image recomposion are multi-threaded and make use of multiple cores if available. The effect of filters is previewed on-canvas.

Key Features

• File Formats

Krita has support for a variety of file formats. Not all file formats are supported equally well, and for some there is only import, not export. Krita supports metadata for kra, ora, tiff, jpeg and png file formats.

• Color models

Krita does not support indexed color models. In general, Krita does not support color models without an alpha channel. Krita supports different channel depths, from 8 bits integer to 32 bits floating point per channel.

• Layer types

Krita supports the both layers and masks. Masks are associated with a single layer, while layers are grouped in a hierarchy.

• Tools

There are several types of tools: vector tools, raster tools, guidance tools, canvas tools and selection tools. Note some types of content are not implement as tools but as “shapes” that can be inserted, for instance richt text, text-on-a-path or geometric shapes.

• Brush engines

Krita is different from other applications in that it supports brush engine plugins. These brush engines are used in the pixel tools to stroke your painting.

• Filters

Krita provides filters that can be used directly, i.e. destructively on the pixels of a layer, when painting, or dynamically as a filter layer or filter mask.

Paint.Net

Paint.net is a free and very capable image editing software for Windows. Great alternative to Photoshop for people that do not need all the stuff PS offers.

In order to handle multiple images easily, Paint.NET uses a tabbed document interface. The tabs display a live thumbnail of the image instead of a text description. This makes navigation very simple and fast. Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

Key Features

• **Performance

Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

• **Layers

Usually only found on expensive or complicated professional software, layers form the basis for a rich image composition experience. You may think of them as a stack of transparency slides that, when viewed together at the same time, form one image.

• **Automatically Updated

Updates are free, and contain new features, performance improvements, and bug fixes. Upgrading to the latest version is very simple, requiring only two clicks of the mouse.

• **Special Effects

Many special effects are included for enhancing and perfecting your images. Everything from blurring, sharpening, red-eye removal, distortion, noise, and embossing are included. Also included is our unique 3D Rotate/Zoom effect that makes it very easy to add perspective and tilting. Adjustments are also included which help you tweak an image’s brightness, contrast, hue, saturation, curves, and levels. You can also convert an image to black and white, or sepia-toned.

• **Powerful Tools

Paint.NET includes simple tools for drawing shapes, including an easy-to-use curve tool for drawing splines or Bezier curves. The Gradient tool, new for 3.0, has been cited as an innovative improvement over similar tools provided by other software. The facilities for creating and working with selections is powerful, yet still simple enough to be picked up quickly. Other powerful tools include the Magic Wand for selecting regions of similar color, and the Clone Stamp for copying or erasing portions of an image. There is also a simple text editor, a tool for zooming, and a Recolor tool.

• **Unlimited History

Everybody makes mistakes, and everybody changes their mind. To accommodate this, _every action you perform on an image is recorded in the History window and may be undone. Once you’ve undone an action, you can also redo it. The length of the history is only limited by available disk space.

Adobe Photoshop

Adobe Photoshop is the commercial image editor that set the standard in creative illustration and design work with a sophisticated, layer-based workflow and robust, professional feature set.

Over the years, Photoshop developed from a small photo editing tool to an Industry-leading software that dictates the global graphic designing and multimedia industries. With every new version, Adobe introduces in the Photoshop; the graphic designing communities wait to check out the next big leap where Photoshop can take them.

Key Features of Adobe Photoshop

• Layers

With Layers palette, you can draw or design various elements of your document independently in layers and stack them up as per the order of display. With this advantage, control over every single object is catered at the click of a mouse. Mistakes happen, but the effects of the mistake are limited to the part of the canvas; you can choose to work on the particular part and leave the rest of the canvas as it is. This benefit is lacking in the traditional painting method. Artists are not allowed to relax at any part of the drawing or painting once their concentration is diverted and a stroke of painting goes wrong! They are bound to change the whole canvas.

• Selection Tools

Photoshop’s selection tools are so handy to use that designers worldwide are addicted to the set of selection tools Photoshop offers. However, there are a bunch of competitive software and open-source software designed to give tough competition for Photoshop. Users are still stuck with Adobe’s torch bearer software due to the ease its tools provide.

• Pen Tool

Today, Photoshop cannot be imagined without a Pen tool. Though the pen tool, by nature, works for drawing paths along with the anchor points, the creative scope it provides is limitless. The tool is designed so flexibly that the designer can draw any shape or edit the existing shapes as good as he is using his bare hand. The amount of control we have through placing the anchor points in the right places is taken further with the three types of Anchor points that can allow you to draw and edit paths precisely.

• Shapes

The outlook of the shape layers in Photoshop may be limited, but the capabilities of the feature go a step further than what we assume about it. In the traditional marquee selection tools, the selection is limited to the raster process, and in many cases, the output will result in the sharp pixilated edges, which are never good looking. But the shape layers can act as an individual object within the document with its attribute to maintain the finest quality.

• Vector Mask

The layer masks create a masking portion of an object by using the grayscale color combination (Shades of Gray). Once the masking part is done, the area of the object under the layer mask disappears.

• Retouching Tools

Retouching tools are an accumulation of various tools such as Stamp tool, Pattern Stamp tool, Spot Healing tool, Healing tool, Patch tool, Redeye tool and much more. Though the numbers are more, every tool has its importance. The development of retouching tools did not happen overnight. Adobe was working hard identifying the problems of the photographers and finding the solutions for the problems from time to time.

Affinity Photo

Affinity Photo is a professional, full-featured raster graphics editor. Working in Affinity Photo is always live and you can pan and zoom at 60fps, with live previews and non-destructive application.

Whatever your genre of choice, be it landscapes, portraits, macro or anything else, Affinity not only has an unbeatable set of tools to help you, but it’s also laid out in an intuitive way that is ideal for newcomers and those switching from other software alike. There are a series of modules, called Personas, that bring you dedicated interfaces, such as Tone Mapping, RAW Developing and even a powerful liquify interface that makes complex reshaping a breeze! Even better, you can take the full functionality of the desktop app on the road, thanks to the iPad version, which is the most powerful mobile editing solution available. With so much on offer for so little, it’s time that you incorporated Affinity Photo into your workflow and moved your photography to the next step. To get you started, we’re going to give you some great tips to get the most from this brilliant software and get you well on the way to creating your own Masterpieces.

• **Develop RAW Files Like A Pro

The first milestone in any photographer’s journey is unquestionably learning to shoot RAW. This image format captures even more data than JPEG and can be tweaked to create the perfect image or a solid base for further editing. To take advantage, all you need to do is open up your RAW file of choice into Affinity Photo and the Develop Persona will load up automatically. From here you can apply exposure adjustments, recover highlights and shadows and even craft a split toning effect. There’s a Curves adjustment for precision tweaks, a savvy noise reduction component and a lens correction module to combat distortion. It has everything you need for that all-important first step to brilliance.

• **Professional Skin Retouching At The Click Of A Button

If you shoot portraits, you’ll doubtless know about the power of frequency separation. This technique is favored by many pros to get that glossy high-end look that screams professional. While it may sound complicated, in Affinity Photo it’s as simple as going to the Photo Persona and clicking on Filters>Frequency Separation. Once you’ve done this, you can set your Gaussian Blur amount in real-time, click Apply and the software will split your shot into two layers, one with the color and one with the detail. From here, you can remove blemishes, add your own dodge and burn and tidy up colors – a game changer!

• **Ramp Up Your Dynamic Range With Tone Mapping

Amazingly, Affinity Photo has its very own Tone Mapping Persona with a full suite of tools to get your well on the way to high dynamic range images, whether you have a series of bracketed shots – identical photos taken at different exposures – or a single shot as we’ve used. Opening this Persona brings up a toolbar on the right-hand side with the usual exposure and enhancement tools, though also gives you access to Tone Compression, Local Contrast and detail sliders. There’s even a series of presets to get you started. Like most of Affinity, the effects can be seen in real-time and are completely reversible, meaning there’s no such thing as a permanent mistake. What we love most about the Tone Mapping Persona is the subtlety compared to others on offer, meaning you’re able to keep your shots looking natural while still getting the most from your work!

• **Adjustments Are Plentiful And Powerful

Adjustments refer to a series of functional layers that apply specific effects to your shots. These can be as simple as Exposure, Vibrance or Brightness and Contrast, which do what they say on the tin, all the way up to more powerful options like Gradient Maps, Channel Mixers and Color Balance for creative effects and color corrections. Because they’re layers, they can be altered at any time in your editing process and moved around as you see fit. They affect any layers below them in the Layer palette but can be set to cast an effect on only a single-pixel layer by using the brilliant Mask to Below feature. You can also stack as many Adjustments as you wish, giving you a huge amount of flexibility to fine-tune your work in any way possible.

• **Layers Offer You The Ultimate Creative Freedom

An editing software that doesn’t allow Layers will really set back your creative choices. Happily, Affinity Photo gives you full control over its layer system. This means that you can bring in additional elements into your scene. You can then take advantage of Affinity’s hugely powerful selection engine to select the parts you wish to cut out or scroll through the full list of Blending Modes for a more refined and creative look. To add the birds to our shot, we took one landscape and added in a shot of birds taken against a white sky. From here, it’s as easy as setting the Blending Mode to Multiply and voila, the white sky has gone. Of course, there’s no need to stop there, and you can find yourself creating in-depth composites that are truly only limited by your imagination - set yourself free!

Pixlr

Pixlr makes it easy to transform everyday images into stunning works of art. Whether you’re applying a quick fix to your photos or adding your personal touch with effects, overlays, or borders, Pixlr has everything you need to make your moments beautiful.

For now, Pixlr is free for all users: individuals to the enterprise. There is no news yet if and when the platform is set to charge people from using it. For content creators and artists on the go, Pixlr is a great app to use. It is free and available on the web. Regardless of your device, you only need an internet connection to get access to a free app but with serious functionalities. You just open your files from your device through the app like you would any popular image editing software and you are good to go. Furthermore, images edited on Pixlr are set to private. This makes your interaction with the app, over the net, is secure. Also, Pixlr does not store any copy of your images in their systems.

Key Features

• **Free and Safe

Pixlr, for now, is free. There is also no indication that the company will charge users soon. It is a legitimate site that does not engage in fraudulent activities or perpetuate any hidden charges. The images that you edit or make on Pixlr are also free for commercial use. For freelance artists and small businesses, this is the perfect starter app. For enterprises with content creators in the field, it is good to let employees know about Pixlr’s no-cost offer.

• **Versatile and Lightweight

Any browser can access Pixlr. Users can access the image editing suite regardless of device type and operating system. If you are on Mac, Windows, or Linux using Safari, Edge, Firefox, or Chrome, Pixlr is available at your disposal. All you need to have is a Flash plug-in.

If you are on mobile using iOS or Android, you can download the native apps. They do not take much of space and memory. It is a true lightweight app that packs a punch when it comes to functionality.

• **Quick Fix

Pixlr is known for being the lightweight app that packs so many editing tools and functionalities at no cost. But, maybe, more importantly, it also includes many tools for quick fixes. This is something essential for people on the go or those that just need minor adjustments. Just open your browser on any device and apply touch-ups. You do not have to open your laptop or go to your desktop for simple needs.

• **Spot heal

Super useful, the spot heal tool can help remove scratches or blemishes by simply clicking on the area. Additional options: Besides size of brush, you have a choice of Pixlr choosing to blend the area with nearby area values or generate a pattern. Generally, you will only want to choose a pattern if you’re blending an area that has a pattern (e.g., a chain-link fence).

• **Dodge

Use the dodge tool to lighten specific areas. Note that this is a tool that deals with contrast (light vs. dark) and not color, although color may sometimes appear to change based on your lightening. Additional options: You can change brush size and exposure settings. You can also choose to focus your lightening on shadows, midtones, or highlights.

• **Sponge

The sponge tool enhances or sops up color, depending on your settings. It’s a great tool for saturating or desaturating specific areas of an image. Additional options: You can change the brush size and brush strength, but the most important setting is whether you want to saturate (increase) or desaturate (decrease) coloring.

Conclusion

When choosing an object for use in chroma key, it is important to verify the background “screen” color does not exist on the object. For example, choosing a blue background for a blue butterfly would be a poor choice: portions of the butterfly would be deleted along with the background.In addition, it would be a good idea to become familiar with basic GIMP functions before attempting this tutorial: a basic knowledge of the Layers dialog and toolbox items is necessary prior to attempting this photo editing technique.

Try It Free Try It Free

How to use green screen in gimp

If you take a picture with a solid colored background (blue or green works best), then you can have a computer program pull out the blue or green pixels and replace them with another color or a transparent layer. This process is called “chroma key” and is used in weather forecasts and other special effects. The terms “green screen” and “blue screen” also refer to the chroma key process.

These directions outlined below describe how to use GIMP to add a transparent layer and remove blue or green pixels from an image. This allows you to layer images on different backgrounds or use pictures as Sprites in Scratch or Greenfoot.

Brief outline of process:

1. Start GIMP
2. Open the picture file.
3. Create an “Alpha Channel” (Transparent Pixels)
4. Select “Like Colored Pixels” (Click on the Green or Blue background)
5. Control->K to delete the pixels and reveal the Transparent background.
6. Save the picture as a .gif file. (Not .jpg!)

Detailed Directions:

1. Start GIMP: (The “Gnu Image Manipulation Program”)
2. Click the “K” menu
3. Select “Graphics”
4. Select “GIMP Image Editor”

Note about the GIMP:

Most computer applications run in one window. GIMP will run different windows for each function or object you are working with. (Separate windows for paintbrush menus, images, backgrounds, etc . . .)

1. Select “File-> Open”
2. Navigate to your File Area and select a chroma key picture
3. Once your picture opens, add the “Alpha Channel”
   a. Select “Layer” from the picture menu bar
   b. Select “Transparency”
   c. Select “Add Alpha Channel”
4. Click the “Select Region by Color” icon.
5. Click once on the green or blue color in the background.
6. Press “Control -> K” on the keyboard to delete the colors. The background will appear as a gray checkerboard pattern.
7. Repeat the click and “Control-K” process to remove the background colors.
8. Once the background colors are removed, save the picture:
   a. Select “File-Save As” from the menu bar.
   b. Type “LastnamePicture.gif” as the filename.
9. Select “Convert to Indexed” - Click Export
10. Click “OK”
11. the picture should save.
12. You can now use this picture in Scratch for a sprite, or in other graphics projects to combine with backgrounds.

Best GIMP alternative to edit images

Krita

Krita is an application for image creation and image manipulation. We focus on painting, illustration, concept art and other creative work. This is a short an incomplete list of the most important features Krita provides.

Krita provides an OpenGL based canvas in addition to an unaccelerated canvas. Krita’s filters, histogram computation and image recomposion are multi-threaded and make use of multiple cores if available. The effect of filters is previewed on-canvas.

Key Features

• File Formats

Krita has support for a variety of file formats. Not all file formats are supported equally well, and for some there is only import, not export. Krita supports metadata for kra, ora, tiff, jpeg and png file formats.

• Color models

Krita does not support indexed color models. In general, Krita does not support color models without an alpha channel. Krita supports different channel depths, from 8 bits integer to 32 bits floating point per channel.

• Layer types

Krita supports the both layers and masks. Masks are associated with a single layer, while layers are grouped in a hierarchy.

• Tools

There are several types of tools: vector tools, raster tools, guidance tools, canvas tools and selection tools. Note some types of content are not implement as tools but as “shapes” that can be inserted, for instance richt text, text-on-a-path or geometric shapes.

• Brush engines

Krita is different from other applications in that it supports brush engine plugins. These brush engines are used in the pixel tools to stroke your painting.

• Filters

Krita provides filters that can be used directly, i.e. destructively on the pixels of a layer, when painting, or dynamically as a filter layer or filter mask.

Paint.Net

Paint.net is a free and very capable image editing software for Windows. Great alternative to Photoshop for people that do not need all the stuff PS offers.

In order to handle multiple images easily, Paint.NET uses a tabbed document interface. The tabs display a live thumbnail of the image instead of a text description. This makes navigation very simple and fast. Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

Key Features

• **Performance

Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

• **Layers

Usually only found on expensive or complicated professional software, layers form the basis for a rich image composition experience. You may think of them as a stack of transparency slides that, when viewed together at the same time, form one image.

• **Automatically Updated

Updates are free, and contain new features, performance improvements, and bug fixes. Upgrading to the latest version is very simple, requiring only two clicks of the mouse.

• **Special Effects

Many special effects are included for enhancing and perfecting your images. Everything from blurring, sharpening, red-eye removal, distortion, noise, and embossing are included. Also included is our unique 3D Rotate/Zoom effect that makes it very easy to add perspective and tilting. Adjustments are also included which help you tweak an image’s brightness, contrast, hue, saturation, curves, and levels. You can also convert an image to black and white, or sepia-toned.

• **Powerful Tools

Paint.NET includes simple tools for drawing shapes, including an easy-to-use curve tool for drawing splines or Bezier curves. The Gradient tool, new for 3.0, has been cited as an innovative improvement over similar tools provided by other software. The facilities for creating and working with selections is powerful, yet still simple enough to be picked up quickly. Other powerful tools include the Magic Wand for selecting regions of similar color, and the Clone Stamp for copying or erasing portions of an image. There is also a simple text editor, a tool for zooming, and a Recolor tool.

• **Unlimited History

Everybody makes mistakes, and everybody changes their mind. To accommodate this, _every action you perform on an image is recorded in the History window and may be undone. Once you’ve undone an action, you can also redo it. The length of the history is only limited by available disk space.

Adobe Photoshop

Adobe Photoshop is the commercial image editor that set the standard in creative illustration and design work with a sophisticated, layer-based workflow and robust, professional feature set.

Over the years, Photoshop developed from a small photo editing tool to an Industry-leading software that dictates the global graphic designing and multimedia industries. With every new version, Adobe introduces in the Photoshop; the graphic designing communities wait to check out the next big leap where Photoshop can take them.

Key Features of Adobe Photoshop

• Layers

With Layers palette, you can draw or design various elements of your document independently in layers and stack them up as per the order of display. With this advantage, control over every single object is catered at the click of a mouse. Mistakes happen, but the effects of the mistake are limited to the part of the canvas; you can choose to work on the particular part and leave the rest of the canvas as it is. This benefit is lacking in the traditional painting method. Artists are not allowed to relax at any part of the drawing or painting once their concentration is diverted and a stroke of painting goes wrong! They are bound to change the whole canvas.

• Selection Tools

Photoshop’s selection tools are so handy to use that designers worldwide are addicted to the set of selection tools Photoshop offers. However, there are a bunch of competitive software and open-source software designed to give tough competition for Photoshop. Users are still stuck with Adobe’s torch bearer software due to the ease its tools provide.

• Pen Tool

Today, Photoshop cannot be imagined without a Pen tool. Though the pen tool, by nature, works for drawing paths along with the anchor points, the creative scope it provides is limitless. The tool is designed so flexibly that the designer can draw any shape or edit the existing shapes as good as he is using his bare hand. The amount of control we have through placing the anchor points in the right places is taken further with the three types of Anchor points that can allow you to draw and edit paths precisely.

• Shapes

The outlook of the shape layers in Photoshop may be limited, but the capabilities of the feature go a step further than what we assume about it. In the traditional marquee selection tools, the selection is limited to the raster process, and in many cases, the output will result in the sharp pixilated edges, which are never good looking. But the shape layers can act as an individual object within the document with its attribute to maintain the finest quality.

• Vector Mask

The layer masks create a masking portion of an object by using the grayscale color combination (Shades of Gray). Once the masking part is done, the area of the object under the layer mask disappears.

• Retouching Tools

Retouching tools are an accumulation of various tools such as Stamp tool, Pattern Stamp tool, Spot Healing tool, Healing tool, Patch tool, Redeye tool and much more. Though the numbers are more, every tool has its importance. The development of retouching tools did not happen overnight. Adobe was working hard identifying the problems of the photographers and finding the solutions for the problems from time to time.

Affinity Photo

Affinity Photo is a professional, full-featured raster graphics editor. Working in Affinity Photo is always live and you can pan and zoom at 60fps, with live previews and non-destructive application.

Whatever your genre of choice, be it landscapes, portraits, macro or anything else, Affinity not only has an unbeatable set of tools to help you, but it’s also laid out in an intuitive way that is ideal for newcomers and those switching from other software alike. There are a series of modules, called Personas, that bring you dedicated interfaces, such as Tone Mapping, RAW Developing and even a powerful liquify interface that makes complex reshaping a breeze! Even better, you can take the full functionality of the desktop app on the road, thanks to the iPad version, which is the most powerful mobile editing solution available. With so much on offer for so little, it’s time that you incorporated Affinity Photo into your workflow and moved your photography to the next step. To get you started, we’re going to give you some great tips to get the most from this brilliant software and get you well on the way to creating your own Masterpieces.

• **Develop RAW Files Like A Pro

The first milestone in any photographer’s journey is unquestionably learning to shoot RAW. This image format captures even more data than JPEG and can be tweaked to create the perfect image or a solid base for further editing. To take advantage, all you need to do is open up your RAW file of choice into Affinity Photo and the Develop Persona will load up automatically. From here you can apply exposure adjustments, recover highlights and shadows and even craft a split toning effect. There’s a Curves adjustment for precision tweaks, a savvy noise reduction component and a lens correction module to combat distortion. It has everything you need for that all-important first step to brilliance.

• **Professional Skin Retouching At The Click Of A Button

If you shoot portraits, you’ll doubtless know about the power of frequency separation. This technique is favored by many pros to get that glossy high-end look that screams professional. While it may sound complicated, in Affinity Photo it’s as simple as going to the Photo Persona and clicking on Filters>Frequency Separation. Once you’ve done this, you can set your Gaussian Blur amount in real-time, click Apply and the software will split your shot into two layers, one with the color and one with the detail. From here, you can remove blemishes, add your own dodge and burn and tidy up colors – a game changer!

• **Ramp Up Your Dynamic Range With Tone Mapping

Amazingly, Affinity Photo has its very own Tone Mapping Persona with a full suite of tools to get your well on the way to high dynamic range images, whether you have a series of bracketed shots – identical photos taken at different exposures – or a single shot as we’ve used. Opening this Persona brings up a toolbar on the right-hand side with the usual exposure and enhancement tools, though also gives you access to Tone Compression, Local Contrast and detail sliders. There’s even a series of presets to get you started. Like most of Affinity, the effects can be seen in real-time and are completely reversible, meaning there’s no such thing as a permanent mistake. What we love most about the Tone Mapping Persona is the subtlety compared to others on offer, meaning you’re able to keep your shots looking natural while still getting the most from your work!

• **Adjustments Are Plentiful And Powerful

Adjustments refer to a series of functional layers that apply specific effects to your shots. These can be as simple as Exposure, Vibrance or Brightness and Contrast, which do what they say on the tin, all the way up to more powerful options like Gradient Maps, Channel Mixers and Color Balance for creative effects and color corrections. Because they’re layers, they can be altered at any time in your editing process and moved around as you see fit. They affect any layers below them in the Layer palette but can be set to cast an effect on only a single-pixel layer by using the brilliant Mask to Below feature. You can also stack as many Adjustments as you wish, giving you a huge amount of flexibility to fine-tune your work in any way possible.

• **Layers Offer You The Ultimate Creative Freedom

An editing software that doesn’t allow Layers will really set back your creative choices. Happily, Affinity Photo gives you full control over its layer system. This means that you can bring in additional elements into your scene. You can then take advantage of Affinity’s hugely powerful selection engine to select the parts you wish to cut out or scroll through the full list of Blending Modes for a more refined and creative look. To add the birds to our shot, we took one landscape and added in a shot of birds taken against a white sky. From here, it’s as easy as setting the Blending Mode to Multiply and voila, the white sky has gone. Of course, there’s no need to stop there, and you can find yourself creating in-depth composites that are truly only limited by your imagination - set yourself free!

Pixlr

Pixlr makes it easy to transform everyday images into stunning works of art. Whether you’re applying a quick fix to your photos or adding your personal touch with effects, overlays, or borders, Pixlr has everything you need to make your moments beautiful.

For now, Pixlr is free for all users: individuals to the enterprise. There is no news yet if and when the platform is set to charge people from using it. For content creators and artists on the go, Pixlr is a great app to use. It is free and available on the web. Regardless of your device, you only need an internet connection to get access to a free app but with serious functionalities. You just open your files from your device through the app like you would any popular image editing software and you are good to go. Furthermore, images edited on Pixlr are set to private. This makes your interaction with the app, over the net, is secure. Also, Pixlr does not store any copy of your images in their systems.

Key Features

• **Free and Safe

Pixlr, for now, is free. There is also no indication that the company will charge users soon. It is a legitimate site that does not engage in fraudulent activities or perpetuate any hidden charges. The images that you edit or make on Pixlr are also free for commercial use. For freelance artists and small businesses, this is the perfect starter app. For enterprises with content creators in the field, it is good to let employees know about Pixlr’s no-cost offer.

• **Versatile and Lightweight

Any browser can access Pixlr. Users can access the image editing suite regardless of device type and operating system. If you are on Mac, Windows, or Linux using Safari, Edge, Firefox, or Chrome, Pixlr is available at your disposal. All you need to have is a Flash plug-in.

If you are on mobile using iOS or Android, you can download the native apps. They do not take much of space and memory. It is a true lightweight app that packs a punch when it comes to functionality.

• **Quick Fix

Pixlr is known for being the lightweight app that packs so many editing tools and functionalities at no cost. But, maybe, more importantly, it also includes many tools for quick fixes. This is something essential for people on the go or those that just need minor adjustments. Just open your browser on any device and apply touch-ups. You do not have to open your laptop or go to your desktop for simple needs.

• **Spot heal

Super useful, the spot heal tool can help remove scratches or blemishes by simply clicking on the area. Additional options: Besides size of brush, you have a choice of Pixlr choosing to blend the area with nearby area values or generate a pattern. Generally, you will only want to choose a pattern if you’re blending an area that has a pattern (e.g., a chain-link fence).

• **Dodge

Use the dodge tool to lighten specific areas. Note that this is a tool that deals with contrast (light vs. dark) and not color, although color may sometimes appear to change based on your lightening. Additional options: You can change brush size and exposure settings. You can also choose to focus your lightening on shadows, midtones, or highlights.

• **Sponge

The sponge tool enhances or sops up color, depending on your settings. It’s a great tool for saturating or desaturating specific areas of an image. Additional options: You can change the brush size and brush strength, but the most important setting is whether you want to saturate (increase) or desaturate (decrease) coloring.

Conclusion

When choosing an object for use in chroma key, it is important to verify the background “screen” color does not exist on the object. For example, choosing a blue background for a blue butterfly would be a poor choice: portions of the butterfly would be deleted along with the background.In addition, it would be a good idea to become familiar with basic GIMP functions before attempting this tutorial: a basic knowledge of the Layers dialog and toolbox items is necessary prior to attempting this photo editing technique.

Try It Free Try It Free

How to use green screen in gimp

If you take a picture with a solid colored background (blue or green works best), then you can have a computer program pull out the blue or green pixels and replace them with another color or a transparent layer. This process is called “chroma key” and is used in weather forecasts and other special effects. The terms “green screen” and “blue screen” also refer to the chroma key process.

These directions outlined below describe how to use GIMP to add a transparent layer and remove blue or green pixels from an image. This allows you to layer images on different backgrounds or use pictures as Sprites in Scratch or Greenfoot.

Brief outline of process:

1. Start GIMP
2. Open the picture file.
3. Create an “Alpha Channel” (Transparent Pixels)
4. Select “Like Colored Pixels” (Click on the Green or Blue background)
5. Control->K to delete the pixels and reveal the Transparent background.
6. Save the picture as a .gif file. (Not .jpg!)

Detailed Directions:

1. Start GIMP: (The “Gnu Image Manipulation Program”)
2. Click the “K” menu
3. Select “Graphics”
4. Select “GIMP Image Editor”

Note about the GIMP:

Most computer applications run in one window. GIMP will run different windows for each function or object you are working with. (Separate windows for paintbrush menus, images, backgrounds, etc . . .)

1. Select “File-> Open”
2. Navigate to your File Area and select a chroma key picture
3. Once your picture opens, add the “Alpha Channel”
   a. Select “Layer” from the picture menu bar
   b. Select “Transparency”
   c. Select “Add Alpha Channel”
4. Click the “Select Region by Color” icon.
5. Click once on the green or blue color in the background.
6. Press “Control -> K” on the keyboard to delete the colors. The background will appear as a gray checkerboard pattern.
7. Repeat the click and “Control-K” process to remove the background colors.
8. Once the background colors are removed, save the picture:
   a. Select “File-Save As” from the menu bar.
   b. Type “LastnamePicture.gif” as the filename.
9. Select “Convert to Indexed” - Click Export
10. Click “OK”
11. the picture should save.
12. You can now use this picture in Scratch for a sprite, or in other graphics projects to combine with backgrounds.

Best GIMP alternative to edit images

Krita

Krita is an application for image creation and image manipulation. We focus on painting, illustration, concept art and other creative work. This is a short an incomplete list of the most important features Krita provides.

Krita provides an OpenGL based canvas in addition to an unaccelerated canvas. Krita’s filters, histogram computation and image recomposion are multi-threaded and make use of multiple cores if available. The effect of filters is previewed on-canvas.

Key Features

• File Formats

Krita has support for a variety of file formats. Not all file formats are supported equally well, and for some there is only import, not export. Krita supports metadata for kra, ora, tiff, jpeg and png file formats.

• Color models

Krita does not support indexed color models. In general, Krita does not support color models without an alpha channel. Krita supports different channel depths, from 8 bits integer to 32 bits floating point per channel.

• Layer types

Krita supports the both layers and masks. Masks are associated with a single layer, while layers are grouped in a hierarchy.

• Tools

There are several types of tools: vector tools, raster tools, guidance tools, canvas tools and selection tools. Note some types of content are not implement as tools but as “shapes” that can be inserted, for instance richt text, text-on-a-path or geometric shapes.

• Brush engines

Krita is different from other applications in that it supports brush engine plugins. These brush engines are used in the pixel tools to stroke your painting.

• Filters

Krita provides filters that can be used directly, i.e. destructively on the pixels of a layer, when painting, or dynamically as a filter layer or filter mask.

Paint.Net

Paint.net is a free and very capable image editing software for Windows. Great alternative to Photoshop for people that do not need all the stuff PS offers.

In order to handle multiple images easily, Paint.NET uses a tabbed document interface. The tabs display a live thumbnail of the image instead of a text description. This makes navigation very simple and fast. Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

Key Features

• **Performance

Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

• **Layers

Usually only found on expensive or complicated professional software, layers form the basis for a rich image composition experience. You may think of them as a stack of transparency slides that, when viewed together at the same time, form one image.

• **Automatically Updated

Updates are free, and contain new features, performance improvements, and bug fixes. Upgrading to the latest version is very simple, requiring only two clicks of the mouse.

• **Special Effects

Many special effects are included for enhancing and perfecting your images. Everything from blurring, sharpening, red-eye removal, distortion, noise, and embossing are included. Also included is our unique 3D Rotate/Zoom effect that makes it very easy to add perspective and tilting. Adjustments are also included which help you tweak an image’s brightness, contrast, hue, saturation, curves, and levels. You can also convert an image to black and white, or sepia-toned.

• **Powerful Tools

Paint.NET includes simple tools for drawing shapes, including an easy-to-use curve tool for drawing splines or Bezier curves. The Gradient tool, new for 3.0, has been cited as an innovative improvement over similar tools provided by other software. The facilities for creating and working with selections is powerful, yet still simple enough to be picked up quickly. Other powerful tools include the Magic Wand for selecting regions of similar color, and the Clone Stamp for copying or erasing portions of an image. There is also a simple text editor, a tool for zooming, and a Recolor tool.

• **Unlimited History

Everybody makes mistakes, and everybody changes their mind. To accommodate this, _every action you perform on an image is recorded in the History window and may be undone. Once you’ve undone an action, you can also redo it. The length of the history is only limited by available disk space.

Adobe Photoshop

Adobe Photoshop is the commercial image editor that set the standard in creative illustration and design work with a sophisticated, layer-based workflow and robust, professional feature set.

Over the years, Photoshop developed from a small photo editing tool to an Industry-leading software that dictates the global graphic designing and multimedia industries. With every new version, Adobe introduces in the Photoshop; the graphic designing communities wait to check out the next big leap where Photoshop can take them.

Key Features of Adobe Photoshop

• Layers

With Layers palette, you can draw or design various elements of your document independently in layers and stack them up as per the order of display. With this advantage, control over every single object is catered at the click of a mouse. Mistakes happen, but the effects of the mistake are limited to the part of the canvas; you can choose to work on the particular part and leave the rest of the canvas as it is. This benefit is lacking in the traditional painting method. Artists are not allowed to relax at any part of the drawing or painting once their concentration is diverted and a stroke of painting goes wrong! They are bound to change the whole canvas.

• Selection Tools

Photoshop’s selection tools are so handy to use that designers worldwide are addicted to the set of selection tools Photoshop offers. However, there are a bunch of competitive software and open-source software designed to give tough competition for Photoshop. Users are still stuck with Adobe’s torch bearer software due to the ease its tools provide.

• Pen Tool

Today, Photoshop cannot be imagined without a Pen tool. Though the pen tool, by nature, works for drawing paths along with the anchor points, the creative scope it provides is limitless. The tool is designed so flexibly that the designer can draw any shape or edit the existing shapes as good as he is using his bare hand. The amount of control we have through placing the anchor points in the right places is taken further with the three types of Anchor points that can allow you to draw and edit paths precisely.

• Shapes

The outlook of the shape layers in Photoshop may be limited, but the capabilities of the feature go a step further than what we assume about it. In the traditional marquee selection tools, the selection is limited to the raster process, and in many cases, the output will result in the sharp pixilated edges, which are never good looking. But the shape layers can act as an individual object within the document with its attribute to maintain the finest quality.

• Vector Mask

The layer masks create a masking portion of an object by using the grayscale color combination (Shades of Gray). Once the masking part is done, the area of the object under the layer mask disappears.

• Retouching Tools

Retouching tools are an accumulation of various tools such as Stamp tool, Pattern Stamp tool, Spot Healing tool, Healing tool, Patch tool, Redeye tool and much more. Though the numbers are more, every tool has its importance. The development of retouching tools did not happen overnight. Adobe was working hard identifying the problems of the photographers and finding the solutions for the problems from time to time.

Affinity Photo

Affinity Photo is a professional, full-featured raster graphics editor. Working in Affinity Photo is always live and you can pan and zoom at 60fps, with live previews and non-destructive application.

Whatever your genre of choice, be it landscapes, portraits, macro or anything else, Affinity not only has an unbeatable set of tools to help you, but it’s also laid out in an intuitive way that is ideal for newcomers and those switching from other software alike. There are a series of modules, called Personas, that bring you dedicated interfaces, such as Tone Mapping, RAW Developing and even a powerful liquify interface that makes complex reshaping a breeze! Even better, you can take the full functionality of the desktop app on the road, thanks to the iPad version, which is the most powerful mobile editing solution available. With so much on offer for so little, it’s time that you incorporated Affinity Photo into your workflow and moved your photography to the next step. To get you started, we’re going to give you some great tips to get the most from this brilliant software and get you well on the way to creating your own Masterpieces.

• **Develop RAW Files Like A Pro

The first milestone in any photographer’s journey is unquestionably learning to shoot RAW. This image format captures even more data than JPEG and can be tweaked to create the perfect image or a solid base for further editing. To take advantage, all you need to do is open up your RAW file of choice into Affinity Photo and the Develop Persona will load up automatically. From here you can apply exposure adjustments, recover highlights and shadows and even craft a split toning effect. There’s a Curves adjustment for precision tweaks, a savvy noise reduction component and a lens correction module to combat distortion. It has everything you need for that all-important first step to brilliance.

• **Professional Skin Retouching At The Click Of A Button

If you shoot portraits, you’ll doubtless know about the power of frequency separation. This technique is favored by many pros to get that glossy high-end look that screams professional. While it may sound complicated, in Affinity Photo it’s as simple as going to the Photo Persona and clicking on Filters>Frequency Separation. Once you’ve done this, you can set your Gaussian Blur amount in real-time, click Apply and the software will split your shot into two layers, one with the color and one with the detail. From here, you can remove blemishes, add your own dodge and burn and tidy up colors – a game changer!

• **Ramp Up Your Dynamic Range With Tone Mapping

Amazingly, Affinity Photo has its very own Tone Mapping Persona with a full suite of tools to get your well on the way to high dynamic range images, whether you have a series of bracketed shots – identical photos taken at different exposures – or a single shot as we’ve used. Opening this Persona brings up a toolbar on the right-hand side with the usual exposure and enhancement tools, though also gives you access to Tone Compression, Local Contrast and detail sliders. There’s even a series of presets to get you started. Like most of Affinity, the effects can be seen in real-time and are completely reversible, meaning there’s no such thing as a permanent mistake. What we love most about the Tone Mapping Persona is the subtlety compared to others on offer, meaning you’re able to keep your shots looking natural while still getting the most from your work!

• **Adjustments Are Plentiful And Powerful

Adjustments refer to a series of functional layers that apply specific effects to your shots. These can be as simple as Exposure, Vibrance or Brightness and Contrast, which do what they say on the tin, all the way up to more powerful options like Gradient Maps, Channel Mixers and Color Balance for creative effects and color corrections. Because they’re layers, they can be altered at any time in your editing process and moved around as you see fit. They affect any layers below them in the Layer palette but can be set to cast an effect on only a single-pixel layer by using the brilliant Mask to Below feature. You can also stack as many Adjustments as you wish, giving you a huge amount of flexibility to fine-tune your work in any way possible.

• **Layers Offer You The Ultimate Creative Freedom

An editing software that doesn’t allow Layers will really set back your creative choices. Happily, Affinity Photo gives you full control over its layer system. This means that you can bring in additional elements into your scene. You can then take advantage of Affinity’s hugely powerful selection engine to select the parts you wish to cut out or scroll through the full list of Blending Modes for a more refined and creative look. To add the birds to our shot, we took one landscape and added in a shot of birds taken against a white sky. From here, it’s as easy as setting the Blending Mode to Multiply and voila, the white sky has gone. Of course, there’s no need to stop there, and you can find yourself creating in-depth composites that are truly only limited by your imagination - set yourself free!

Pixlr

Pixlr makes it easy to transform everyday images into stunning works of art. Whether you’re applying a quick fix to your photos or adding your personal touch with effects, overlays, or borders, Pixlr has everything you need to make your moments beautiful.

For now, Pixlr is free for all users: individuals to the enterprise. There is no news yet if and when the platform is set to charge people from using it. For content creators and artists on the go, Pixlr is a great app to use. It is free and available on the web. Regardless of your device, you only need an internet connection to get access to a free app but with serious functionalities. You just open your files from your device through the app like you would any popular image editing software and you are good to go. Furthermore, images edited on Pixlr are set to private. This makes your interaction with the app, over the net, is secure. Also, Pixlr does not store any copy of your images in their systems.

Key Features

• **Free and Safe

Pixlr, for now, is free. There is also no indication that the company will charge users soon. It is a legitimate site that does not engage in fraudulent activities or perpetuate any hidden charges. The images that you edit or make on Pixlr are also free for commercial use. For freelance artists and small businesses, this is the perfect starter app. For enterprises with content creators in the field, it is good to let employees know about Pixlr’s no-cost offer.

• **Versatile and Lightweight

Any browser can access Pixlr. Users can access the image editing suite regardless of device type and operating system. If you are on Mac, Windows, or Linux using Safari, Edge, Firefox, or Chrome, Pixlr is available at your disposal. All you need to have is a Flash plug-in.

If you are on mobile using iOS or Android, you can download the native apps. They do not take much of space and memory. It is a true lightweight app that packs a punch when it comes to functionality.

• **Quick Fix

Pixlr is known for being the lightweight app that packs so many editing tools and functionalities at no cost. But, maybe, more importantly, it also includes many tools for quick fixes. This is something essential for people on the go or those that just need minor adjustments. Just open your browser on any device and apply touch-ups. You do not have to open your laptop or go to your desktop for simple needs.

• **Spot heal

Super useful, the spot heal tool can help remove scratches or blemishes by simply clicking on the area. Additional options: Besides size of brush, you have a choice of Pixlr choosing to blend the area with nearby area values or generate a pattern. Generally, you will only want to choose a pattern if you’re blending an area that has a pattern (e.g., a chain-link fence).

• **Dodge

Use the dodge tool to lighten specific areas. Note that this is a tool that deals with contrast (light vs. dark) and not color, although color may sometimes appear to change based on your lightening. Additional options: You can change brush size and exposure settings. You can also choose to focus your lightening on shadows, midtones, or highlights.

• **Sponge

The sponge tool enhances or sops up color, depending on your settings. It’s a great tool for saturating or desaturating specific areas of an image. Additional options: You can change the brush size and brush strength, but the most important setting is whether you want to saturate (increase) or desaturate (decrease) coloring.

Conclusion

When choosing an object for use in chroma key, it is important to verify the background “screen” color does not exist on the object. For example, choosing a blue background for a blue butterfly would be a poor choice: portions of the butterfly would be deleted along with the background.In addition, it would be a good idea to become familiar with basic GIMP functions before attempting this tutorial: a basic knowledge of the Layers dialog and toolbox items is necessary prior to attempting this photo editing technique.

Try It Free Try It Free

How to use green screen in gimp

If you take a picture with a solid colored background (blue or green works best), then you can have a computer program pull out the blue or green pixels and replace them with another color or a transparent layer. This process is called “chroma key” and is used in weather forecasts and other special effects. The terms “green screen” and “blue screen” also refer to the chroma key process.

These directions outlined below describe how to use GIMP to add a transparent layer and remove blue or green pixels from an image. This allows you to layer images on different backgrounds or use pictures as Sprites in Scratch or Greenfoot.

Brief outline of process:

1. Start GIMP
2. Open the picture file.
3. Create an “Alpha Channel” (Transparent Pixels)
4. Select “Like Colored Pixels” (Click on the Green or Blue background)
5. Control->K to delete the pixels and reveal the Transparent background.
6. Save the picture as a .gif file. (Not .jpg!)

Detailed Directions:

1. Start GIMP: (The “Gnu Image Manipulation Program”)
2. Click the “K” menu
3. Select “Graphics”
4. Select “GIMP Image Editor”

Note about the GIMP:

Most computer applications run in one window. GIMP will run different windows for each function or object you are working with. (Separate windows for paintbrush menus, images, backgrounds, etc . . .)

1. Select “File-> Open”
2. Navigate to your File Area and select a chroma key picture
3. Once your picture opens, add the “Alpha Channel”
   a. Select “Layer” from the picture menu bar
   b. Select “Transparency”
   c. Select “Add Alpha Channel”
4. Click the “Select Region by Color” icon.
5. Click once on the green or blue color in the background.
6. Press “Control -> K” on the keyboard to delete the colors. The background will appear as a gray checkerboard pattern.
7. Repeat the click and “Control-K” process to remove the background colors.
8. Once the background colors are removed, save the picture:
   a. Select “File-Save As” from the menu bar.
   b. Type “LastnamePicture.gif” as the filename.
9. Select “Convert to Indexed” - Click Export
10. Click “OK”
11. the picture should save.
12. You can now use this picture in Scratch for a sprite, or in other graphics projects to combine with backgrounds.

Best GIMP alternative to edit images

Krita

Krita is an application for image creation and image manipulation. We focus on painting, illustration, concept art and other creative work. This is a short an incomplete list of the most important features Krita provides.

Krita provides an OpenGL based canvas in addition to an unaccelerated canvas. Krita’s filters, histogram computation and image recomposion are multi-threaded and make use of multiple cores if available. The effect of filters is previewed on-canvas.

Key Features

• File Formats

Krita has support for a variety of file formats. Not all file formats are supported equally well, and for some there is only import, not export. Krita supports metadata for kra, ora, tiff, jpeg and png file formats.

• Color models

Krita does not support indexed color models. In general, Krita does not support color models without an alpha channel. Krita supports different channel depths, from 8 bits integer to 32 bits floating point per channel.

• Layer types

Krita supports the both layers and masks. Masks are associated with a single layer, while layers are grouped in a hierarchy.

• Tools

There are several types of tools: vector tools, raster tools, guidance tools, canvas tools and selection tools. Note some types of content are not implement as tools but as “shapes” that can be inserted, for instance richt text, text-on-a-path or geometric shapes.

• Brush engines

Krita is different from other applications in that it supports brush engine plugins. These brush engines are used in the pixel tools to stroke your painting.

• Filters

Krita provides filters that can be used directly, i.e. destructively on the pixels of a layer, when painting, or dynamically as a filter layer or filter mask.

Paint.Net

Paint.net is a free and very capable image editing software for Windows. Great alternative to Photoshop for people that do not need all the stuff PS offers.

In order to handle multiple images easily, Paint.NET uses a tabbed document interface. The tabs display a live thumbnail of the image instead of a text description. This makes navigation very simple and fast. Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

Key Features

• **Performance

Extensive work has gone into making Paint.NET the fastest image editor available. Whether you have a netbook with a power-conscious Atom CPU, or a Dual Intel Xeon workstation with 16+ blazingly fast processing cores, you can expect Paint.NET to start up quickly and be responsive to every mouse click.

• **Layers

Usually only found on expensive or complicated professional software, layers form the basis for a rich image composition experience. You may think of them as a stack of transparency slides that, when viewed together at the same time, form one image.

• **Automatically Updated

Updates are free, and contain new features, performance improvements, and bug fixes. Upgrading to the latest version is very simple, requiring only two clicks of the mouse.

• **Special Effects

Many special effects are included for enhancing and perfecting your images. Everything from blurring, sharpening, red-eye removal, distortion, noise, and embossing are included. Also included is our unique 3D Rotate/Zoom effect that makes it very easy to add perspective and tilting. Adjustments are also included which help you tweak an image’s brightness, contrast, hue, saturation, curves, and levels. You can also convert an image to black and white, or sepia-toned.

• **Powerful Tools

Paint.NET includes simple tools for drawing shapes, including an easy-to-use curve tool for drawing splines or Bezier curves. The Gradient tool, new for 3.0, has been cited as an innovative improvement over similar tools provided by other software. The facilities for creating and working with selections is powerful, yet still simple enough to be picked up quickly. Other powerful tools include the Magic Wand for selecting regions of similar color, and the Clone Stamp for copying or erasing portions of an image. There is also a simple text editor, a tool for zooming, and a Recolor tool.

• **Unlimited History

Everybody makes mistakes, and everybody changes their mind. To accommodate this, _every action you perform on an image is recorded in the History window and may be undone. Once you’ve undone an action, you can also redo it. The length of the history is only limited by available disk space.

Adobe Photoshop

Adobe Photoshop is the commercial image editor that set the standard in creative illustration and design work with a sophisticated, layer-based workflow and robust, professional feature set.

Over the years, Photoshop developed from a small photo editing tool to an Industry-leading software that dictates the global graphic designing and multimedia industries. With every new version, Adobe introduces in the Photoshop; the graphic designing communities wait to check out the next big leap where Photoshop can take them.

Key Features of Adobe Photoshop

• Layers

With Layers palette, you can draw or design various elements of your document independently in layers and stack them up as per the order of display. With this advantage, control over every single object is catered at the click of a mouse. Mistakes happen, but the effects of the mistake are limited to the part of the canvas; you can choose to work on the particular part and leave the rest of the canvas as it is. This benefit is lacking in the traditional painting method. Artists are not allowed to relax at any part of the drawing or painting once their concentration is diverted and a stroke of painting goes wrong! They are bound to change the whole canvas.

• Selection Tools

Photoshop’s selection tools are so handy to use that designers worldwide are addicted to the set of selection tools Photoshop offers. However, there are a bunch of competitive software and open-source software designed to give tough competition for Photoshop. Users are still stuck with Adobe’s torch bearer software due to the ease its tools provide.

• Pen Tool

Today, Photoshop cannot be imagined without a Pen tool. Though the pen tool, by nature, works for drawing paths along with the anchor points, the creative scope it provides is limitless. The tool is designed so flexibly that the designer can draw any shape or edit the existing shapes as good as he is using his bare hand. The amount of control we have through placing the anchor points in the right places is taken further with the three types of Anchor points that can allow you to draw and edit paths precisely.

• Shapes

The outlook of the shape layers in Photoshop may be limited, but the capabilities of the feature go a step further than what we assume about it. In the traditional marquee selection tools, the selection is limited to the raster process, and in many cases, the output will result in the sharp pixilated edges, which are never good looking. But the shape layers can act as an individual object within the document with its attribute to maintain the finest quality.

• Vector Mask

The layer masks create a masking portion of an object by using the grayscale color combination (Shades of Gray). Once the masking part is done, the area of the object under the layer mask disappears.

• Retouching Tools

Retouching tools are an accumulation of various tools such as Stamp tool, Pattern Stamp tool, Spot Healing tool, Healing tool, Patch tool, Redeye tool and much more. Though the numbers are more, every tool has its importance. The development of retouching tools did not happen overnight. Adobe was working hard identifying the problems of the photographers and finding the solutions for the problems from time to time.

Affinity Photo

Affinity Photo is a professional, full-featured raster graphics editor. Working in Affinity Photo is always live and you can pan and zoom at 60fps, with live previews and non-destructive application.

Whatever your genre of choice, be it landscapes, portraits, macro or anything else, Affinity not only has an unbeatable set of tools to help you, but it’s also laid out in an intuitive way that is ideal for newcomers and those switching from other software alike. There are a series of modules, called Personas, that bring you dedicated interfaces, such as Tone Mapping, RAW Developing and even a powerful liquify interface that makes complex reshaping a breeze! Even better, you can take the full functionality of the desktop app on the road, thanks to the iPad version, which is the most powerful mobile editing solution available. With so much on offer for so little, it’s time that you incorporated Affinity Photo into your workflow and moved your photography to the next step. To get you started, we’re going to give you some great tips to get the most from this brilliant software and get you well on the way to creating your own Masterpieces.

• **Develop RAW Files Like A Pro

The first milestone in any photographer’s journey is unquestionably learning to shoot RAW. This image format captures even more data than JPEG and can be tweaked to create the perfect image or a solid base for further editing. To take advantage, all you need to do is open up your RAW file of choice into Affinity Photo and the Develop Persona will load up automatically. From here you can apply exposure adjustments, recover highlights and shadows and even craft a split toning effect. There’s a Curves adjustment for precision tweaks, a savvy noise reduction component and a lens correction module to combat distortion. It has everything you need for that all-important first step to brilliance.

• **Professional Skin Retouching At The Click Of A Button

If you shoot portraits, you’ll doubtless know about the power of frequency separation. This technique is favored by many pros to get that glossy high-end look that screams professional. While it may sound complicated, in Affinity Photo it’s as simple as going to the Photo Persona and clicking on Filters>Frequency Separation. Once you’ve done this, you can set your Gaussian Blur amount in real-time, click Apply and the software will split your shot into two layers, one with the color and one with the detail. From here, you can remove blemishes, add your own dodge and burn and tidy up colors – a game changer!

• **Ramp Up Your Dynamic Range With Tone Mapping

Amazingly, Affinity Photo has its very own Tone Mapping Persona with a full suite of tools to get your well on the way to high dynamic range images, whether you have a series of bracketed shots – identical photos taken at different exposures – or a single shot as we’ve used. Opening this Persona brings up a toolbar on the right-hand side with the usual exposure and enhancement tools, though also gives you access to Tone Compression, Local Contrast and detail sliders. There’s even a series of presets to get you started. Like most of Affinity, the effects can be seen in real-time and are completely reversible, meaning there’s no such thing as a permanent mistake. What we love most about the Tone Mapping Persona is the subtlety compared to others on offer, meaning you’re able to keep your shots looking natural while still getting the most from your work!

• **Adjustments Are Plentiful And Powerful

Adjustments refer to a series of functional layers that apply specific effects to your shots. These can be as simple as Exposure, Vibrance or Brightness and Contrast, which do what they say on the tin, all the way up to more powerful options like Gradient Maps, Channel Mixers and Color Balance for creative effects and color corrections. Because they’re layers, they can be altered at any time in your editing process and moved around as you see fit. They affect any layers below them in the Layer palette but can be set to cast an effect on only a single-pixel layer by using the brilliant Mask to Below feature. You can also stack as many Adjustments as you wish, giving you a huge amount of flexibility to fine-tune your work in any way possible.

• **Layers Offer You The Ultimate Creative Freedom

An editing software that doesn’t allow Layers will really set back your creative choices. Happily, Affinity Photo gives you full control over its layer system. This means that you can bring in additional elements into your scene. You can then take advantage of Affinity’s hugely powerful selection engine to select the parts you wish to cut out or scroll through the full list of Blending Modes for a more refined and creative look. To add the birds to our shot, we took one landscape and added in a shot of birds taken against a white sky. From here, it’s as easy as setting the Blending Mode to Multiply and voila, the white sky has gone. Of course, there’s no need to stop there, and you can find yourself creating in-depth composites that are truly only limited by your imagination - set yourself free!

Pixlr

Pixlr makes it easy to transform everyday images into stunning works of art. Whether you’re applying a quick fix to your photos or adding your personal touch with effects, overlays, or borders, Pixlr has everything you need to make your moments beautiful.

For now, Pixlr is free for all users: individuals to the enterprise. There is no news yet if and when the platform is set to charge people from using it. For content creators and artists on the go, Pixlr is a great app to use. It is free and available on the web. Regardless of your device, you only need an internet connection to get access to a free app but with serious functionalities. You just open your files from your device through the app like you would any popular image editing software and you are good to go. Furthermore, images edited on Pixlr are set to private. This makes your interaction with the app, over the net, is secure. Also, Pixlr does not store any copy of your images in their systems.

Key Features

• **Free and Safe

Pixlr, for now, is free. There is also no indication that the company will charge users soon. It is a legitimate site that does not engage in fraudulent activities or perpetuate any hidden charges. The images that you edit or make on Pixlr are also free for commercial use. For freelance artists and small businesses, this is the perfect starter app. For enterprises with content creators in the field, it is good to let employees know about Pixlr’s no-cost offer.

• **Versatile and Lightweight

Any browser can access Pixlr. Users can access the image editing suite regardless of device type and operating system. If you are on Mac, Windows, or Linux using Safari, Edge, Firefox, or Chrome, Pixlr is available at your disposal. All you need to have is a Flash plug-in.

If you are on mobile using iOS or Android, you can download the native apps. They do not take much of space and memory. It is a true lightweight app that packs a punch when it comes to functionality.

• **Quick Fix

Pixlr is known for being the lightweight app that packs so many editing tools and functionalities at no cost. But, maybe, more importantly, it also includes many tools for quick fixes. This is something essential for people on the go or those that just need minor adjustments. Just open your browser on any device and apply touch-ups. You do not have to open your laptop or go to your desktop for simple needs.

• **Spot heal

Super useful, the spot heal tool can help remove scratches or blemishes by simply clicking on the area. Additional options: Besides size of brush, you have a choice of Pixlr choosing to blend the area with nearby area values or generate a pattern. Generally, you will only want to choose a pattern if you’re blending an area that has a pattern (e.g., a chain-link fence).

• **Dodge

Use the dodge tool to lighten specific areas. Note that this is a tool that deals with contrast (light vs. dark) and not color, although color may sometimes appear to change based on your lightening. Additional options: You can change brush size and exposure settings. You can also choose to focus your lightening on shadows, midtones, or highlights.

• **Sponge

The sponge tool enhances or sops up color, depending on your settings. It’s a great tool for saturating or desaturating specific areas of an image. Additional options: You can change the brush size and brush strength, but the most important setting is whether you want to saturate (increase) or desaturate (decrease) coloring.

Conclusion

When choosing an object for use in chroma key, it is important to verify the background “screen” color does not exist on the object. For example, choosing a blue background for a blue butterfly would be a poor choice: portions of the butterfly would be deleted along with the background.In addition, it would be a good idea to become familiar with basic GIMP functions before attempting this tutorial: a basic knowledge of the Layers dialog and toolbox items is necessary prior to attempting this photo editing technique.

Camtasia Vs. Final Cut Pro

With many available video editing solutions in the market today, it is a bit hard to choose the best video editing software for your unique needs. Remember, it’s all about investing money. In every purchase, you need to be sure about purchasing no matter the amount. In the case of video editing software, the concern is just significant as you should find software that perfectly suits your requirements. A video editing software may be having excellent features, but become complex when working with. On the other hand, the software may be quite user-friendly, but its range of tools is not as large.

Implementing tools such as Camtasia or Final Cut Pro requires a great deal of contemplating and comparison of crucial factors. You may be wondering, when you compare Camtasia vs Final cut pro, which is the best to use. To make a clear comparison between these two video editing programs, one has to judge all the crucial elements. Though the two programs share some degree of similarity, this article will help you understand if Final Cut Pro is better than Camtasia. We are going to compare Final Cut Pro X vs Techsmith Camtasia using their features, pros, and Cons, market prices, functionality, and customer support to help you fully understand them.

Overall Comparison

This table will help you compare Camtasia vs Final cut pro.

674 reviews341 reviews$ 249.99 for a user license$139.99 upgrade$299.99 per licenseRelatively easy to use A bit complicated for beginners</6h>

| | Camtasia | Final Cut Pro | |
| ——————— | ————————————————————————————————————————- | ————————————————————————————————————————— |
| Overall rating | 674 reviews | 341 reviews |
| Entry-level Price | $ 249.99 for a user license $139.99 upgrade | $299.99 per license |
| Ease of use | Relatively easy to use | A bit complicated for beginners |
| Market share | Small-Business (50.5% of reviews) Mid-Market (26.0% of reviews) Enterprise (23.4% of reviews) | Small-Business (71.0% of reviews) Mid-Market (17.05 reviews) Enterprise (11.9% of reviews) |
| Value of money | 2/10 – low cost | 4/10 – average cost |
| Customer support | Provide Email Languages supported; English, French, Germany, Japanese. | Email Languages supported; English |
| Functionality | Speed is a bit slow Various exporting settings. Enough editing capability. Does not support live recording from a camera. | Speed is higher than its comparison Exporting settings are limited Not as efficient as its comparison Has DV camera support |
| Support system | Desktop, Cloud | Desktop, Cloud, Mobile |

As you can see in the table above there is no great deference seen when comparing Final cut pro X vs Techsmith Camtasia, but it can tell you if is Final cut pro better than Camtasia or reverse is the case.

Final Cut Pro

Final Cut Pro is the perfect macOS video editing software that can help you achieve a professional-looking video. This software is built with the latest and most powerful tools that make it an effortless tool for video editing. It has impressive filters, graphics, and a range of other cool video editing features. Its coolest part is its ability to enable 360-degree video editing for VR and VR headset playback. This program uses multi-core multi-thread machines quickly to allow you to import the videos in different formats faster than others.

Like any other software, Final Cut Pro possesses some pros and cons as listed below;

Pros:

• It is a stable program that can be very useful in small businesses.
• It has a powerful architecture for your complex and heavy projects.
• Its fast rendering speed can allow you to conduct Multicam editing.
• It has classic GPU utilization and powerful media organization to allow you to organize assets such as audio and video carefully.
• Its easy audio modification capabilities can allow you to create impeccable VR videos.
• It has a customizable and streamlined share interface that makes high-quality file delivery easy and fast.
• It can edit videos offline.
• It is tailored with real-time graphics and cool effects like text and blurs that are easy to apply.

Cons:

• It is complex and thus difficult for beginners.
• It has limited export options.
• It only works on Mac computers.

Editing video with Final Cut Pro is not a complicated process. Here are the steps to help a beginner get started.

Step1: Create a new project & import media

When you Launch the Final Cut Pro interface, Libraries and Events are automatically created. You only need to create a new project.

At the top menu bar, click File > New > Project to create a new project. Here you will have to type in a new name of the project and then select ‘Use Automatic Settings’.

At the top menu bar again, click File > Import > Media to enable the program to bring up the Media Import window where you can select the video and audio files you want to import into your new project.

After selecting all the media you want to include in your project press ‘Import Selected’ and then close the media window.

Step 2: Add your trimmed clips to the timeline.

The thumbnails of all the media you have imported will be appearing in the browser. For you to create a new video you need to arrange and trim that media in the timeline.

In your browser, you can set the ‘In and Out’ points for each video clip by holding ‘_Option_’. To do this you will have to click the thumbnail and drag it. The yellow timeline that appears on the clip represents the range that will be added to your video timeline.

After arranging them in the order that you want them to play, trim your clips by moving the mouse cursor to the edge of its thumbnail. This is done by using the ‘Trim tool’. Drag forward or backward to adjust the clip’s endings.

If you are arranging the clips in your sequence, you need to drag and drop any of the clips from the timeline into a different position. Final Cut Pro has a tool known as Magnetic timeline that will automatically insert and arrange the clips for you. You just need to ensure that your clips do not overlap or lay on top of each other.

To preview your video in the viewer, press the space bar on your keyboard or the Play icon in your software interface.

Step 3: Add Title, Texts, Transitions, and Effects

Title and Texts: Final Cut Pro has many Titles located in the browser where you imported your media. You can add them by dragging them into your video’s timeline. To access those titles you can press the ‘Title and Generators’ icon in the sidebar to open it.

Transitions: When adding Transitions, there is nothing wrong with a “hard cut_” between 2 clips. Use the transitions only where they make sense so as not to ruin your video. To add these transitions, you need to open the ‘_Transition browser’ by clicking on its indicated icon.

The transition’s length can be adjusted by dragging inwards or outwards. To customize your transition you can open the inspector by pressing ‘Command + 4’ and make the adjustments.

Effects: With Final Cut Pro inbuilt Effects, you can add some more value to your video after you are done with basic arrangements in the timeline. To add the effects click on the ‘Effects browser’ icon to open it.

Next to the effects browser icon, choose your preferred effect and add it between any 2 clips. By doing this you will have added animation effect between them.

Step 4: Add Audio, Music, and Color.

Audio & Music: At this point, you can import and add your music. Photos and Audio sidebar icon is located above the browser and you can click to open, and then select Sound Effects.

To see all the songs available in Final Cut Pro, you can type the word ‘Jingle‘ and you can preview them by pressing the small play button.

Color correction: By highlighting all the video clips in your video timeline, you can see a yellow outline around them.

Then open the drop-down menu by clicking the ‘_Enhancement_’ icon situated below the Viewer.

To improve the color and contrast, select Balance Color or ‘Option + Cmd + B’.

Now that you are done editing your video, you can save and share as you prefer.

Camtasia

Camtasia is a perfect all-in-one video editing and screen recording program. If you compare Camtasia vs Final cut pro, Camtasia is quite easy to use even for beginners. It can work in both Windows and macOS and provides the user with a demonstration and education video platform. It contains cool features to help you capture and edit your videos and audios appropriately.

Here are some pros and cons of Camtasia.

Pros:

• It is easy to learn.
• It has a good capture feature.
• Impressive cursor effects.
• It has Interactivity features.
• It has a good asset library
• Availability of mobile version.
• It offers great customer service.
• Available at a low cost.

Cons:

• Constant crashes and bugs.
• Limited customization
• No key tracking.

Here are key steps to follow when editing a video with Camtasia.

Step 1: Break up steps of a process with lower thirds.

Break any long multi-step video to help lower the viewer’s cognitive load.

Step 2: Reinforce texts with video.

Remove any mistakes and extra content such as unnecessary footage from the ends of your recording. If you trim too much drag the clip back to restore. This process is known as trimming.

You can zoom in on the most important section to focus your viewer’s attention there.

Step 3: Add narrative to video

Alternative Way to Edit Videos

Getting an appropriate video editing software is quite challenging as the makers of these software sometimes get confused about if the programs needed are for home videos or professional-quality work such as Hollywood movies. This is why you will find that some programs are complex to use while others lack essential features to make your work efficient.

Filmora video editor is one of the most efficient for video editing. This software is powerful and easy to use and it is built with many features to make your vision come true. It is fit for small scale, medium scale and large businesses.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

These steps will help you to know how to edit video with Filmora software;

Step 1: Start a new project.

After making sure that you have Filmora video editor installed on your computer, start a new project. Open the app then choose a dropdown option from the Select Project Aspect Ratio.

Step 2: Import your media

The footage, photos, and audios you use in your video are the key basic aspects of your video. Organizing all the files you are going to use in a single file. You can do this by browsing the file menu. Click the ‘File > Import Media Folder’ menu in Filmora and select the folder that contains your video files.

After importing your video files the thumbnails for each file will appear in one half of the application. Double-click on the thumbnails for a preview.

These thumbnails prove that all your captured video clips are already in the application and ready to be edited. Click on the Filmora video editing guide to get to help you know what to do.

Step 3: Add clips to the timeline, trim, adjust appropriately and sequence them.

Now that you have reviewed your video library and seen that they are there, you need to add them to the video editing timeline at the bottom of your app. This is quite easy as you can view all your video clips and determine which is to be added first.

Drag and drop each video or photo in the timeline to add it to your project.

After adding the clips, you can trim and adjust them appropriately. Click on the right or left edges of the clip you want to shorten in the timeline and drag it to shorten.

If you want to split a clip in the timeline, pick the scissors by clicking on the ‘_Scissors_’ icon.

When working on your video footage, click the spacebar of your computer keyboard to preview. By doing this, you will be able to see how your clips are joined together.

Trim appropriately and perfect the runtime of every single clip and re-order your clips where there is a need to do so. This can be done by clicking on the targeted clip and dragging it to where you want it to be.

Step 4: Add video Effects, Transmissions between the clips, and Text overlays

Click on the Effect icon at the top of the app and a deep visual library of effects will be visible. If you want to add a certain effect to your active clip, just double-click it.

Add transitions in your video timeline to cut the scene-to-scene. They are quite necessary as they help establish your audience’s attention.

The next thing after adding the transmissions will be adding the overlays and exporting your video by clicking on the ‘Export‘ button.

Step 5: Export your finished video.

You can click the ‘Export’ button and switch to the platform you want your video to be exported.

Conclusion

Choosing an appropriate video editing tool is equally as important as the video itself. And with the availability of so many of these video editing tools, choosing among them is quite hard. You can easily get confused especially if you are a beginner in the video editing industry. To avoid the complications you need to know what editing software is the best for your project.

As you can see in the table above there is no great deference seen when comparing Final cut pro X vs Techsmith Camtasia, but it can tell you if is Final cut pro better than Camtasia or reverse is the case.

Final Cut Pro

Final Cut Pro is the perfect macOS video editing software that can help you achieve a professional-looking video. This software is built with the latest and most powerful tools that make it an effortless tool for video editing. It has impressive filters, graphics, and a range of other cool video editing features. Its coolest part is its ability to enable 360-degree video editing for VR and VR headset playback. This program uses multi-core multi-thread machines quickly to allow you to import the videos in different formats faster than others.

Like any other software, Final Cut Pro possesses some pros and cons as listed below;

Pros:

• It is a stable program that can be very useful in small businesses.
• It has a powerful architecture for your complex and heavy projects.
• Its fast rendering speed can allow you to conduct Multicam editing.
• It has classic GPU utilization and powerful media organization to allow you to organize assets such as audio and video carefully.
• Its easy audio modification capabilities can allow you to create impeccable VR videos.
• It has a customizable and streamlined share interface that makes high-quality file delivery easy and fast.
• It can edit videos offline.
• It is tailored with real-time graphics and cool effects like text and blurs that are easy to apply.

Cons:

• It is complex and thus difficult for beginners.
• It has limited export options.
• It only works on Mac computers.

Editing video with Final Cut Pro is not a complicated process. Here are the steps to help a beginner get started.

Step1: Create a new project & import media

When you Launch the Final Cut Pro interface, Libraries and Events are automatically created. You only need to create a new project.

At the top menu bar, click File > New > Project to create a new project. Here you will have to type in a new name of the project and then select ‘Use Automatic Settings’.

At the top menu bar again, click File > Import > Media to enable the program to bring up the Media Import window where you can select the video and audio files you want to import into your new project.

After selecting all the media you want to include in your project press ‘Import Selected’ and then close the media window.

Step 2: Add your trimmed clips to the timeline.

The thumbnails of all the media you have imported will be appearing in the browser. For you to create a new video you need to arrange and trim that media in the timeline.

In your browser, you can set the ‘In and Out’ points for each video clip by holding ‘_Option_’. To do this you will have to click the thumbnail and drag it. The yellow timeline that appears on the clip represents the range that will be added to your video timeline.

After arranging them in the order that you want them to play, trim your clips by moving the mouse cursor to the edge of its thumbnail. This is done by using the ‘Trim tool’. Drag forward or backward to adjust the clip’s endings.

If you are arranging the clips in your sequence, you need to drag and drop any of the clips from the timeline into a different position. Final Cut Pro has a tool known as Magnetic timeline that will automatically insert and arrange the clips for you. You just need to ensure that your clips do not overlap or lay on top of each other.

To preview your video in the viewer, press the space bar on your keyboard or the Play icon in your software interface.

Step 3: Add Title, Texts, Transitions, and Effects

Title and Texts: Final Cut Pro has many Titles located in the browser where you imported your media. You can add them by dragging them into your video’s timeline. To access those titles you can press the ‘Title and Generators’ icon in the sidebar to open it.

Transitions: When adding Transitions, there is nothing wrong with a “hard cut_” between 2 clips. Use the transitions only where they make sense so as not to ruin your video. To add these transitions, you need to open the ‘_Transition browser’ by clicking on its indicated icon.

The transition’s length can be adjusted by dragging inwards or outwards. To customize your transition you can open the inspector by pressing ‘Command + 4’ and make the adjustments.

Effects: With Final Cut Pro inbuilt Effects, you can add some more value to your video after you are done with basic arrangements in the timeline. To add the effects click on the ‘Effects browser’ icon to open it.

Next to the effects browser icon, choose your preferred effect and add it between any 2 clips. By doing this you will have added animation effect between them.

Step 4: Add Audio, Music, and Color.

Audio & Music: At this point, you can import and add your music. Photos and Audio sidebar icon is located above the browser and you can click to open, and then select Sound Effects.

To see all the songs available in Final Cut Pro, you can type the word ‘Jingle‘ and you can preview them by pressing the small play button.

Color correction: By highlighting all the video clips in your video timeline, you can see a yellow outline around them.

Then open the drop-down menu by clicking the ‘_Enhancement_’ icon situated below the Viewer.

To improve the color and contrast, select Balance Color or ‘Option + Cmd + B’.

Now that you are done editing your video, you can save and share as you prefer.

Camtasia

Camtasia is a perfect all-in-one video editing and screen recording program. If you compare Camtasia vs Final cut pro, Camtasia is quite easy to use even for beginners. It can work in both Windows and macOS and provides the user with a demonstration and education video platform. It contains cool features to help you capture and edit your videos and audios appropriately.

Here are some pros and cons of Camtasia.

Pros:

• It is easy to learn.
• It has a good capture feature.
• Impressive cursor effects.
• It has Interactivity features.
• It has a good asset library
• Availability of mobile version.
• It offers great customer service.
• Available at a low cost.

Cons:

• Constant crashes and bugs.
• Limited customization
• No key tracking.

Here are key steps to follow when editing a video with Camtasia.

Step 1: Break up steps of a process with lower thirds.

Break any long multi-step video to help lower the viewer’s cognitive load.

Step 2: Reinforce texts with video.

Remove any mistakes and extra content such as unnecessary footage from the ends of your recording. If you trim too much drag the clip back to restore. This process is known as trimming.

You can zoom in on the most important section to focus your viewer’s attention there.

Step 3: Add narrative to video

Alternative Way to Edit Videos

Getting an appropriate video editing software is quite challenging as the makers of these software sometimes get confused about if the programs needed are for home videos or professional-quality work such as Hollywood movies. This is why you will find that some programs are complex to use while others lack essential features to make your work efficient.

Filmora video editor is one of the most efficient for video editing. This software is powerful and easy to use and it is built with many features to make your vision come true. It is fit for small scale, medium scale and large businesses.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

These steps will help you to know how to edit video with Filmora software;

Step 1: Start a new project.

After making sure that you have Filmora video editor installed on your computer, start a new project. Open the app then choose a dropdown option from the Select Project Aspect Ratio.

Step 2: Import your media

The footage, photos, and audios you use in your video are the key basic aspects of your video. Organizing all the files you are going to use in a single file. You can do this by browsing the file menu. Click the ‘File > Import Media Folder’ menu in Filmora and select the folder that contains your video files.

After importing your video files the thumbnails for each file will appear in one half of the application. Double-click on the thumbnails for a preview.

These thumbnails prove that all your captured video clips are already in the application and ready to be edited. Click on the Filmora video editing guide to get to help you know what to do.

Step 3: Add clips to the timeline, trim, adjust appropriately and sequence them.

Now that you have reviewed your video library and seen that they are there, you need to add them to the video editing timeline at the bottom of your app. This is quite easy as you can view all your video clips and determine which is to be added first.

Drag and drop each video or photo in the timeline to add it to your project.

After adding the clips, you can trim and adjust them appropriately. Click on the right or left edges of the clip you want to shorten in the timeline and drag it to shorten.

If you want to split a clip in the timeline, pick the scissors by clicking on the ‘_Scissors_’ icon.

When working on your video footage, click the spacebar of your computer keyboard to preview. By doing this, you will be able to see how your clips are joined together.

Trim appropriately and perfect the runtime of every single clip and re-order your clips where there is a need to do so. This can be done by clicking on the targeted clip and dragging it to where you want it to be.

Step 4: Add video Effects, Transmissions between the clips, and Text overlays

Click on the Effect icon at the top of the app and a deep visual library of effects will be visible. If you want to add a certain effect to your active clip, just double-click it.

Add transitions in your video timeline to cut the scene-to-scene. They are quite necessary as they help establish your audience’s attention.

The next thing after adding the transmissions will be adding the overlays and exporting your video by clicking on the ‘Export‘ button.

Step 5: Export your finished video.

You can click the ‘Export’ button and switch to the platform you want your video to be exported.

Conclusion

Choosing an appropriate video editing tool is equally as important as the video itself. And with the availability of so many of these video editing tools, choosing among them is quite hard. You can easily get confused especially if you are a beginner in the video editing industry. To avoid the complications you need to know what editing software is the best for your project.

As you can see in the table above there is no great deference seen when comparing Final cut pro X vs Techsmith Camtasia, but it can tell you if is Final cut pro better than Camtasia or reverse is the case.

Final Cut Pro

Final Cut Pro is the perfect macOS video editing software that can help you achieve a professional-looking video. This software is built with the latest and most powerful tools that make it an effortless tool for video editing. It has impressive filters, graphics, and a range of other cool video editing features. Its coolest part is its ability to enable 360-degree video editing for VR and VR headset playback. This program uses multi-core multi-thread machines quickly to allow you to import the videos in different formats faster than others.

Like any other software, Final Cut Pro possesses some pros and cons as listed below;

Pros:

• It is a stable program that can be very useful in small businesses.
• It has a powerful architecture for your complex and heavy projects.
• Its fast rendering speed can allow you to conduct Multicam editing.
• It has classic GPU utilization and powerful media organization to allow you to organize assets such as audio and video carefully.
• Its easy audio modification capabilities can allow you to create impeccable VR videos.
• It has a customizable and streamlined share interface that makes high-quality file delivery easy and fast.
• It can edit videos offline.
• It is tailored with real-time graphics and cool effects like text and blurs that are easy to apply.

Cons:

• It is complex and thus difficult for beginners.
• It has limited export options.
• It only works on Mac computers.

Editing video with Final Cut Pro is not a complicated process. Here are the steps to help a beginner get started.

Step1: Create a new project & import media

When you Launch the Final Cut Pro interface, Libraries and Events are automatically created. You only need to create a new project.

At the top menu bar, click File > New > Project to create a new project. Here you will have to type in a new name of the project and then select ‘Use Automatic Settings’.

At the top menu bar again, click File > Import > Media to enable the program to bring up the Media Import window where you can select the video and audio files you want to import into your new project.

After selecting all the media you want to include in your project press ‘Import Selected’ and then close the media window.

Step 2: Add your trimmed clips to the timeline.

The thumbnails of all the media you have imported will be appearing in the browser. For you to create a new video you need to arrange and trim that media in the timeline.

In your browser, you can set the ‘In and Out’ points for each video clip by holding ‘_Option_’. To do this you will have to click the thumbnail and drag it. The yellow timeline that appears on the clip represents the range that will be added to your video timeline.

After arranging them in the order that you want them to play, trim your clips by moving the mouse cursor to the edge of its thumbnail. This is done by using the ‘Trim tool’. Drag forward or backward to adjust the clip’s endings.

If you are arranging the clips in your sequence, you need to drag and drop any of the clips from the timeline into a different position. Final Cut Pro has a tool known as Magnetic timeline that will automatically insert and arrange the clips for you. You just need to ensure that your clips do not overlap or lay on top of each other.

To preview your video in the viewer, press the space bar on your keyboard or the Play icon in your software interface.

Step 3: Add Title, Texts, Transitions, and Effects

Title and Texts: Final Cut Pro has many Titles located in the browser where you imported your media. You can add them by dragging them into your video’s timeline. To access those titles you can press the ‘Title and Generators’ icon in the sidebar to open it.

Transitions: When adding Transitions, there is nothing wrong with a “hard cut_” between 2 clips. Use the transitions only where they make sense so as not to ruin your video. To add these transitions, you need to open the ‘_Transition browser’ by clicking on its indicated icon.

The transition’s length can be adjusted by dragging inwards or outwards. To customize your transition you can open the inspector by pressing ‘Command + 4’ and make the adjustments.

Effects: With Final Cut Pro inbuilt Effects, you can add some more value to your video after you are done with basic arrangements in the timeline. To add the effects click on the ‘Effects browser’ icon to open it.

Next to the effects browser icon, choose your preferred effect and add it between any 2 clips. By doing this you will have added animation effect between them.

Step 4: Add Audio, Music, and Color.

Audio & Music: At this point, you can import and add your music. Photos and Audio sidebar icon is located above the browser and you can click to open, and then select Sound Effects.

To see all the songs available in Final Cut Pro, you can type the word ‘Jingle‘ and you can preview them by pressing the small play button.

Color correction: By highlighting all the video clips in your video timeline, you can see a yellow outline around them.

Then open the drop-down menu by clicking the ‘_Enhancement_’ icon situated below the Viewer.

To improve the color and contrast, select Balance Color or ‘Option + Cmd + B’.

Now that you are done editing your video, you can save and share as you prefer.

Camtasia

Camtasia is a perfect all-in-one video editing and screen recording program. If you compare Camtasia vs Final cut pro, Camtasia is quite easy to use even for beginners. It can work in both Windows and macOS and provides the user with a demonstration and education video platform. It contains cool features to help you capture and edit your videos and audios appropriately.

Here are some pros and cons of Camtasia.

Pros:

• It is easy to learn.
• It has a good capture feature.
• Impressive cursor effects.
• It has Interactivity features.
• It has a good asset library
• Availability of mobile version.
• It offers great customer service.
• Available at a low cost.

Cons:

• Constant crashes and bugs.
• Limited customization
• No key tracking.

Here are key steps to follow when editing a video with Camtasia.

Step 1: Break up steps of a process with lower thirds.

Break any long multi-step video to help lower the viewer’s cognitive load.

Step 2: Reinforce texts with video.

Remove any mistakes and extra content such as unnecessary footage from the ends of your recording. If you trim too much drag the clip back to restore. This process is known as trimming.

You can zoom in on the most important section to focus your viewer’s attention there.

Step 3: Add narrative to video

Alternative Way to Edit Videos

Getting an appropriate video editing software is quite challenging as the makers of these software sometimes get confused about if the programs needed are for home videos or professional-quality work such as Hollywood movies. This is why you will find that some programs are complex to use while others lack essential features to make your work efficient.

Filmora video editor is one of the most efficient for video editing. This software is powerful and easy to use and it is built with many features to make your vision come true. It is fit for small scale, medium scale and large businesses.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

These steps will help you to know how to edit video with Filmora software;

Step 1: Start a new project.

After making sure that you have Filmora video editor installed on your computer, start a new project. Open the app then choose a dropdown option from the Select Project Aspect Ratio.

Step 2: Import your media

The footage, photos, and audios you use in your video are the key basic aspects of your video. Organizing all the files you are going to use in a single file. You can do this by browsing the file menu. Click the ‘File > Import Media Folder’ menu in Filmora and select the folder that contains your video files.

After importing your video files the thumbnails for each file will appear in one half of the application. Double-click on the thumbnails for a preview.

These thumbnails prove that all your captured video clips are already in the application and ready to be edited. Click on the Filmora video editing guide to get to help you know what to do.

Step 3: Add clips to the timeline, trim, adjust appropriately and sequence them.

Now that you have reviewed your video library and seen that they are there, you need to add them to the video editing timeline at the bottom of your app. This is quite easy as you can view all your video clips and determine which is to be added first.

Drag and drop each video or photo in the timeline to add it to your project.

After adding the clips, you can trim and adjust them appropriately. Click on the right or left edges of the clip you want to shorten in the timeline and drag it to shorten.

If you want to split a clip in the timeline, pick the scissors by clicking on the ‘_Scissors_’ icon.

When working on your video footage, click the spacebar of your computer keyboard to preview. By doing this, you will be able to see how your clips are joined together.

Trim appropriately and perfect the runtime of every single clip and re-order your clips where there is a need to do so. This can be done by clicking on the targeted clip and dragging it to where you want it to be.

Step 4: Add video Effects, Transmissions between the clips, and Text overlays

Click on the Effect icon at the top of the app and a deep visual library of effects will be visible. If you want to add a certain effect to your active clip, just double-click it.

Add transitions in your video timeline to cut the scene-to-scene. They are quite necessary as they help establish your audience’s attention.

The next thing after adding the transmissions will be adding the overlays and exporting your video by clicking on the ‘Export‘ button.

Step 5: Export your finished video.

You can click the ‘Export’ button and switch to the platform you want your video to be exported.

Conclusion

Choosing an appropriate video editing tool is equally as important as the video itself. And with the availability of so many of these video editing tools, choosing among them is quite hard. You can easily get confused especially if you are a beginner in the video editing industry. To avoid the complications you need to know what editing software is the best for your project.

As you can see in the table above there is no great deference seen when comparing Final cut pro X vs Techsmith Camtasia, but it can tell you if is Final cut pro better than Camtasia or reverse is the case.

Final Cut Pro

Final Cut Pro is the perfect macOS video editing software that can help you achieve a professional-looking video. This software is built with the latest and most powerful tools that make it an effortless tool for video editing. It has impressive filters, graphics, and a range of other cool video editing features. Its coolest part is its ability to enable 360-degree video editing for VR and VR headset playback. This program uses multi-core multi-thread machines quickly to allow you to import the videos in different formats faster than others.

Like any other software, Final Cut Pro possesses some pros and cons as listed below;

Pros:

• It is a stable program that can be very useful in small businesses.
• It has a powerful architecture for your complex and heavy projects.
• Its fast rendering speed can allow you to conduct Multicam editing.
• It has classic GPU utilization and powerful media organization to allow you to organize assets such as audio and video carefully.
• Its easy audio modification capabilities can allow you to create impeccable VR videos.
• It has a customizable and streamlined share interface that makes high-quality file delivery easy and fast.
• It can edit videos offline.
• It is tailored with real-time graphics and cool effects like text and blurs that are easy to apply.

Cons:

• It is complex and thus difficult for beginners.
• It has limited export options.
• It only works on Mac computers.

Editing video with Final Cut Pro is not a complicated process. Here are the steps to help a beginner get started.

Step1: Create a new project & import media

When you Launch the Final Cut Pro interface, Libraries and Events are automatically created. You only need to create a new project.

At the top menu bar, click File > New > Project to create a new project. Here you will have to type in a new name of the project and then select ‘Use Automatic Settings’.

At the top menu bar again, click File > Import > Media to enable the program to bring up the Media Import window where you can select the video and audio files you want to import into your new project.

After selecting all the media you want to include in your project press ‘Import Selected’ and then close the media window.

Step 2: Add your trimmed clips to the timeline.

The thumbnails of all the media you have imported will be appearing in the browser. For you to create a new video you need to arrange and trim that media in the timeline.

In your browser, you can set the ‘In and Out’ points for each video clip by holding ‘_Option_’. To do this you will have to click the thumbnail and drag it. The yellow timeline that appears on the clip represents the range that will be added to your video timeline.

After arranging them in the order that you want them to play, trim your clips by moving the mouse cursor to the edge of its thumbnail. This is done by using the ‘Trim tool’. Drag forward or backward to adjust the clip’s endings.

If you are arranging the clips in your sequence, you need to drag and drop any of the clips from the timeline into a different position. Final Cut Pro has a tool known as Magnetic timeline that will automatically insert and arrange the clips for you. You just need to ensure that your clips do not overlap or lay on top of each other.

To preview your video in the viewer, press the space bar on your keyboard or the Play icon in your software interface.

Step 3: Add Title, Texts, Transitions, and Effects

Title and Texts: Final Cut Pro has many Titles located in the browser where you imported your media. You can add them by dragging them into your video’s timeline. To access those titles you can press the ‘Title and Generators’ icon in the sidebar to open it.

Transitions: When adding Transitions, there is nothing wrong with a “hard cut_” between 2 clips. Use the transitions only where they make sense so as not to ruin your video. To add these transitions, you need to open the ‘_Transition browser’ by clicking on its indicated icon.

The transition’s length can be adjusted by dragging inwards or outwards. To customize your transition you can open the inspector by pressing ‘Command + 4’ and make the adjustments.

Effects: With Final Cut Pro inbuilt Effects, you can add some more value to your video after you are done with basic arrangements in the timeline. To add the effects click on the ‘Effects browser’ icon to open it.

Next to the effects browser icon, choose your preferred effect and add it between any 2 clips. By doing this you will have added animation effect between them.

Step 4: Add Audio, Music, and Color.

Audio & Music: At this point, you can import and add your music. Photos and Audio sidebar icon is located above the browser and you can click to open, and then select Sound Effects.

To see all the songs available in Final Cut Pro, you can type the word ‘Jingle‘ and you can preview them by pressing the small play button.

Color correction: By highlighting all the video clips in your video timeline, you can see a yellow outline around them.

Then open the drop-down menu by clicking the ‘_Enhancement_’ icon situated below the Viewer.

To improve the color and contrast, select Balance Color or ‘Option + Cmd + B’.

Now that you are done editing your video, you can save and share as you prefer.

Camtasia

Camtasia is a perfect all-in-one video editing and screen recording program. If you compare Camtasia vs Final cut pro, Camtasia is quite easy to use even for beginners. It can work in both Windows and macOS and provides the user with a demonstration and education video platform. It contains cool features to help you capture and edit your videos and audios appropriately.

Here are some pros and cons of Camtasia.

Pros:

• It is easy to learn.
• It has a good capture feature.
• Impressive cursor effects.
• It has Interactivity features.
• It has a good asset library
• Availability of mobile version.
• It offers great customer service.
• Available at a low cost.

Cons:

• Constant crashes and bugs.
• Limited customization
• No key tracking.

Here are key steps to follow when editing a video with Camtasia.

Step 1: Break up steps of a process with lower thirds.

Break any long multi-step video to help lower the viewer’s cognitive load.

Step 2: Reinforce texts with video.

Remove any mistakes and extra content such as unnecessary footage from the ends of your recording. If you trim too much drag the clip back to restore. This process is known as trimming.

You can zoom in on the most important section to focus your viewer’s attention there.

Step 3: Add narrative to video

Alternative Way to Edit Videos

Getting an appropriate video editing software is quite challenging as the makers of these software sometimes get confused about if the programs needed are for home videos or professional-quality work such as Hollywood movies. This is why you will find that some programs are complex to use while others lack essential features to make your work efficient.

Filmora video editor is one of the most efficient for video editing. This software is powerful and easy to use and it is built with many features to make your vision come true. It is fit for small scale, medium scale and large businesses.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

These steps will help you to know how to edit video with Filmora software;

Step 1: Start a new project.

After making sure that you have Filmora video editor installed on your computer, start a new project. Open the app then choose a dropdown option from the Select Project Aspect Ratio.

Step 2: Import your media

The footage, photos, and audios you use in your video are the key basic aspects of your video. Organizing all the files you are going to use in a single file. You can do this by browsing the file menu. Click the ‘File > Import Media Folder’ menu in Filmora and select the folder that contains your video files.

After importing your video files the thumbnails for each file will appear in one half of the application. Double-click on the thumbnails for a preview.

These thumbnails prove that all your captured video clips are already in the application and ready to be edited. Click on the Filmora video editing guide to get to help you know what to do.

Step 3: Add clips to the timeline, trim, adjust appropriately and sequence them.

Now that you have reviewed your video library and seen that they are there, you need to add them to the video editing timeline at the bottom of your app. This is quite easy as you can view all your video clips and determine which is to be added first.

Drag and drop each video or photo in the timeline to add it to your project.

After adding the clips, you can trim and adjust them appropriately. Click on the right or left edges of the clip you want to shorten in the timeline and drag it to shorten.

If you want to split a clip in the timeline, pick the scissors by clicking on the ‘_Scissors_’ icon.

When working on your video footage, click the spacebar of your computer keyboard to preview. By doing this, you will be able to see how your clips are joined together.

Trim appropriately and perfect the runtime of every single clip and re-order your clips where there is a need to do so. This can be done by clicking on the targeted clip and dragging it to where you want it to be.

Step 4: Add video Effects, Transmissions between the clips, and Text overlays

Click on the Effect icon at the top of the app and a deep visual library of effects will be visible. If you want to add a certain effect to your active clip, just double-click it.

Add transitions in your video timeline to cut the scene-to-scene. They are quite necessary as they help establish your audience’s attention.

The next thing after adding the transmissions will be adding the overlays and exporting your video by clicking on the ‘Export‘ button.

Step 5: Export your finished video.

You can click the ‘Export’ button and switch to the platform you want your video to be exported.

Conclusion

Choosing an appropriate video editing tool is equally as important as the video itself. And with the availability of so many of these video editing tools, choosing among them is quite hard. You can easily get confused especially if you are a beginner in the video editing industry. To avoid the complications you need to know what editing software is the best for your project.

Also read: