Does Your Video Shake so Much? Shaking Movement on Your Camera Is Often Inevitable, Especially if You Don’t Use a Camera Stabilizer or a Camera with No Built-In Image Stabilization. As a Result, It Can Make Your Video Look Distracting and Difficult to Watch

Does your video shake so much? Shaking movement on your camera is often inevitable, especially if you don’t use a camera stabilizer or a camera with no built-in image stabilization. As a result, it can make your video look distracting and difficult to watch.

But you don’t need to worry. You can use a stabilization tool in Filmora . A stabilization tool is a feature that can help to correct for camera shake and other types of movement. If you are a handheld shooter, you will find this tool extremely helpful.

Part 1: When do you need to stabilize your video?

Now, let’s talk about when you should stabilize your video. If you’re shooting something that is moving, like people or animals, you will definitely want to stabilize your video. This will help ensure that the video is smooth and steady.

Another time you may want to stabilize your video is if you’re shooting in a low-light situation. It will help to ensure that your video is not too shaky.

Finally, if you’re shooting a video that’s going to be displayed on a large screen, you may want to stabilize your video. Stabilizing your video will help ensure the output is crisp and clear.

Part 2: How to stabilize your video with Filmora

Filmora has a stabilization feature that can help to smooth your video and make it look more professional. If you haven’t installed Filmora yet, you can download it for free.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

So, should you have a wobble movement in your video, follow these steps to make it smoother in no time:

Step1 Launch Filmora 11 and create a new project.

Step2 Import your video to Filmora.

Step3 After you import your video to Filmora, the Stabilization must have been off. So, switch the Stabilization toggle on, then a loading bar will start going up to analyze the clip.

Step4 Once it finishes analyzing, the smooth level will default to 10. See the preview whether you like how it turns out.

Before

After

Please note that the center point of your image will always be the most stable. The more shaky a clip is, the more it will crop into that image.

If you are unsatisfied with the default setting, increasing the Smoothness Level will result in more cropping to the image. On the contrary, if you put the Smoothness Level down to zero, you are no longer cropping into the image, but the result won’t be as smooth.

Should the cropping bother you, such as it crops the subject’s hair out of the frame, you can adjust it with Edge Processing.

If you change it to None, you will see the black bars that simulate how it stabilizes the clip. Try to hit play on the preview screen, and then you can see more clearly how the tool keeps the center of the frame to make it stable and less shaky.

As Reflect is the default, the Extend uses artificial intelligence to extend the pixels, as you are often aware in Photoshop.

Besides the three, there is also the Tile option. Each of them would give a different result. You can try and use the one that works best for you.

Summary

When you’re shooting a video, you must have wanted it to be as smooth and stable as possible. By stabilizing your video, you can help ensure it’s smooth and easy to watch.

Filmora offers a Stabilization feature that allows you to easily improve your video’s quality. Simply select the video clip you want to stabilize and click the stabilization button. Filmora will do the rest, giving you a smooth and stable video.

Free Download For macOS 10.14 or later

So, should you have a wobble movement in your video, follow these steps to make it smoother in no time:

Step1 Launch Filmora 11 and create a new project.

Step2 Import your video to Filmora.

Step3 After you import your video to Filmora, the Stabilization must have been off. So, switch the Stabilization toggle on, then a loading bar will start going up to analyze the clip.

Step4 Once it finishes analyzing, the smooth level will default to 10. See the preview whether you like how it turns out.

Before

After

Please note that the center point of your image will always be the most stable. The more shaky a clip is, the more it will crop into that image.

If you are unsatisfied with the default setting, increasing the Smoothness Level will result in more cropping to the image. On the contrary, if you put the Smoothness Level down to zero, you are no longer cropping into the image, but the result won’t be as smooth.

Should the cropping bother you, such as it crops the subject’s hair out of the frame, you can adjust it with Edge Processing.

If you change it to None, you will see the black bars that simulate how it stabilizes the clip. Try to hit play on the preview screen, and then you can see more clearly how the tool keeps the center of the frame to make it stable and less shaky.

As Reflect is the default, the Extend uses artificial intelligence to extend the pixels, as you are often aware in Photoshop.

Besides the three, there is also the Tile option. Each of them would give a different result. You can try and use the one that works best for you.

Summary

When you’re shooting a video, you must have wanted it to be as smooth and stable as possible. By stabilizing your video, you can help ensure it’s smooth and easy to watch.

Filmora offers a Stabilization feature that allows you to easily improve your video’s quality. Simply select the video clip you want to stabilize and click the stabilization button. Filmora will do the rest, giving you a smooth and stable video.

How to Customize Your Loading Text Effect?

Wondershare Filmora is all you need when it is to professional and creative video editing. The tool is equipped with multiple effects to optimize video editing based on your immediate needs. Using these effects is essential to grand and hold the attention of the audience easily.

Out of all the video effects available in Wondershare Filmora, the loading text effect can be a game changer for keeping your audience engaged. It will reduce the chances of the viewer’s churn and ensure that you offer them something amazing in every part of the video. The best part here is that Wondershare Filmora allows quick customization of this loading text effect.

Let us go through the detailed steps to customize the loading text effect in Wondershare Filmora for your next project. Not to miss is that the customized text effects can be quickly accessed from the “Text Edit” panel or “Advanced Text Edit” panel for future reference.

Step1Download, install, and launch Wondershare Filmora

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The first step to start creating impressive videos using Wondershare Filmora is to download this amazing tool on your Mac or Windows system. It is recommended to go for a quick download and install from the official website of Wondershare Filmora only. The detailed steps for completing this are:

1. Open the official website https://filmora.wondershare.com/video-editor/ of the Wondershare Filmora in your Windows or Mac browser.
2. Go to the “Download” option located in the top right corner of the web page. Click on it to start downloading the Wondershare Filmora installer.
3. Once the download is complete, double-click on it, and accept the terms and conditions. The Wondershare Filmora installer will start running and complete the installation process in a couple of seconds only.
4. Once the installation is complete, Wondershare Filmora will get opened on your system for quick use.

Step2Go to the Titles option

Once Wondershare Filmora is running on your system, it is time to take the first step for customizing the loading text effect. It starts with the titles option where you can select the font of your choice and manage the text spacing. The quick steps for the same are:

1. Start by dropping the default title on track 1.
2. Keep the title up to 17 seconds long.
3. Double-click on the default title to open the font selection.
4. Select the font of your choice from the available options of the numerous fonts.
5. It is easy to change the text loading here.
6. You can increase the text spacing by 15 and then click the ok to close the Titles option.

Step3Go to the My Media option

Now move to the My Media option to add color to the loading text. Here, the blending mode required is also selected. The quick steps to follow in the My Media option are:

1. Open the My Media option and select the red color under the sample color option.
2. Drop red color on track 2.
3. Double-click on the red color and go to the video option.
4. Open the composting option in the video and select the blending mode.
5. Change the blending mode to multiply.

Step4Using the Crop tool

The next step is to move to the crop tool. You have to select the red color ratio and position. The steps for using the crop tool are:

1. Go to the crop tool and select the custom option under the “Ratio” section.
2. Crop red color in the ratio of 80 * 1080.
3. Go to the “Basics” menu located upside to define its position on the left side edge.
4. End the process by placing the playhead at the starting point.

Step5Using Animations option

After the crop tool, it is time to use the animations option to create a loading text effect. You will be placing the keyframes and arranging the playheads in this section. The quick steps for the same are:

1. Add a keyframe to the track and place the playhead to 20 frames further.
2. Start by defining the x-axis position of the red color on the third dot of the “Loading …” text.
3. Now, copy the red color and paste it on the blank space on track two.
4. Next, click on the second keyframe and shift the pasted red color clip on track three to the playhead position.
5. It is time for the third clip now. Click on the second keyframe on the track three clip and define its x-axis position on the second dot of the “Loading …” text.
6. Repeat for track three copying the red color clip and pasting it on the blank space.
7. Click again on the second keyframe on the track three clip and shift the pasted clip to the playhead position.
8. Now, click on the second keyframe of the track four clip and define its x-axis on the first dot of the loading text.
9. You have to repeat the same process until you will the whole “Loading…” text with red color.

Step6Extending the clip durations

After getting the red color in all the loading text, it is time to make the clips in uniformity. All you need to do is extend the clip duration, cut them in uniformity, and place playheads and keyframes accordingly. The detailed steps for the same are:

1. Start by extending every red color clip duration to 17 seconds.
2. Place the playhead at the 14 seconds position and cut all the clips.
3. Delete the extra part left after cutting the clips.
4. Keep track 1 and copy and paste the text on it. Keep the length at 2 seconds only. Leave the rest of the clip part.
5. Start by dropping the red color on track 2 and keep it for 2 seconds duration.
6. Now double-click on the red color and change the “Blending Mode” to multiply.
7. Put the playhead at 14 seconds and add a blank keyframe at the 15th
8. Now put the playhead at the 15 seconds at the 10th frame. Here, define the x-axis position by dragging it from the left to right out of the loading text.

Step7Selecting render preview

The last step but most important is to go for the render preview option. It offers a fast and quick review of the created video file to incorporate any last-minute changes. The quick steps for the same are:

1. Click on the render preview button to see the final preview
2. It will take a few seconds to prepare the rendering frame and will show the preview of the file.

Wrapping Up

Hope everything is clear to you about customizing the loading text effect in Wondershare Filmora. All you need to do is download this amazing video editing software on your Windows and Mac and start using it instantly. It has an easy-to-use interface which is liked by beginners and professionals in video creation like the same.

Wondershare Filmora users can easily start adding customized loading text effects to their videos by accessing the titles menu. Once the font size of the text and other specifications are selected here, you can quickly move to the My Media section to select the color. The next step is to use the crop tool and animations option to bring the red color loading text effect to your video.

Once done with all the steps, it is time to cut the clips and go for the render preview option. Hence, your professional-grade video having the loading text effect is ready. Go for downloading Wondershare Filmora today for creating some exclusive masterpieces.

Free Download For macOS 10.14 or later

The first step to start creating impressive videos using Wondershare Filmora is to download this amazing tool on your Mac or Windows system. It is recommended to go for a quick download and install from the official website of Wondershare Filmora only. The detailed steps for completing this are:

1. Open the official website https://filmora.wondershare.com/video-editor/ of the Wondershare Filmora in your Windows or Mac browser.
2. Go to the “Download” option located in the top right corner of the web page. Click on it to start downloading the Wondershare Filmora installer.
3. Once the download is complete, double-click on it, and accept the terms and conditions. The Wondershare Filmora installer will start running and complete the installation process in a couple of seconds only.
4. Once the installation is complete, Wondershare Filmora will get opened on your system for quick use.

Step2Go to the Titles option

Once Wondershare Filmora is running on your system, it is time to take the first step for customizing the loading text effect. It starts with the titles option where you can select the font of your choice and manage the text spacing. The quick steps for the same are:

1. Start by dropping the default title on track 1.
2. Keep the title up to 17 seconds long.
3. Double-click on the default title to open the font selection.
4. Select the font of your choice from the available options of the numerous fonts.
5. It is easy to change the text loading here.
6. You can increase the text spacing by 15 and then click the ok to close the Titles option.

Step3Go to the My Media option

Now move to the My Media option to add color to the loading text. Here, the blending mode required is also selected. The quick steps to follow in the My Media option are:

1. Open the My Media option and select the red color under the sample color option.
2. Drop red color on track 2.
3. Double-click on the red color and go to the video option.
4. Open the composting option in the video and select the blending mode.
5. Change the blending mode to multiply.

Step4Using the Crop tool

The next step is to move to the crop tool. You have to select the red color ratio and position. The steps for using the crop tool are:

1. Go to the crop tool and select the custom option under the “Ratio” section.
2. Crop red color in the ratio of 80 * 1080.
3. Go to the “Basics” menu located upside to define its position on the left side edge.
4. End the process by placing the playhead at the starting point.

Step5Using Animations option

After the crop tool, it is time to use the animations option to create a loading text effect. You will be placing the keyframes and arranging the playheads in this section. The quick steps for the same are:

1. Add a keyframe to the track and place the playhead to 20 frames further.
2. Start by defining the x-axis position of the red color on the third dot of the “Loading …” text.
3. Now, copy the red color and paste it on the blank space on track two.
4. Next, click on the second keyframe and shift the pasted red color clip on track three to the playhead position.
5. It is time for the third clip now. Click on the second keyframe on the track three clip and define its x-axis position on the second dot of the “Loading …” text.
6. Repeat for track three copying the red color clip and pasting it on the blank space.
7. Click again on the second keyframe on the track three clip and shift the pasted clip to the playhead position.
8. Now, click on the second keyframe of the track four clip and define its x-axis on the first dot of the loading text.
9. You have to repeat the same process until you will the whole “Loading…” text with red color.

Step6Extending the clip durations

After getting the red color in all the loading text, it is time to make the clips in uniformity. All you need to do is extend the clip duration, cut them in uniformity, and place playheads and keyframes accordingly. The detailed steps for the same are:

1. Start by extending every red color clip duration to 17 seconds.
2. Place the playhead at the 14 seconds position and cut all the clips.
3. Delete the extra part left after cutting the clips.
4. Keep track 1 and copy and paste the text on it. Keep the length at 2 seconds only. Leave the rest of the clip part.
5. Start by dropping the red color on track 2 and keep it for 2 seconds duration.
6. Now double-click on the red color and change the “Blending Mode” to multiply.
7. Put the playhead at 14 seconds and add a blank keyframe at the 15th
8. Now put the playhead at the 15 seconds at the 10th frame. Here, define the x-axis position by dragging it from the left to right out of the loading text.

Step7Selecting render preview

The last step but most important is to go for the render preview option. It offers a fast and quick review of the created video file to incorporate any last-minute changes. The quick steps for the same are:

1. Click on the render preview button to see the final preview
2. It will take a few seconds to prepare the rendering frame and will show the preview of the file.

Wrapping Up

Hope everything is clear to you about customizing the loading text effect in Wondershare Filmora. All you need to do is download this amazing video editing software on your Windows and Mac and start using it instantly. It has an easy-to-use interface which is liked by beginners and professionals in video creation like the same.

Wondershare Filmora users can easily start adding customized loading text effects to their videos by accessing the titles menu. Once the font size of the text and other specifications are selected here, you can quickly move to the My Media section to select the color. The next step is to use the crop tool and animations option to bring the red color loading text effect to your video.

Once done with all the steps, it is time to cut the clips and go for the render preview option. Hence, your professional-grade video having the loading text effect is ready. Go for downloading Wondershare Filmora today for creating some exclusive masterpieces.

Free Download For macOS 10.14 or later

The first step to start creating impressive videos using Wondershare Filmora is to download this amazing tool on your Mac or Windows system. It is recommended to go for a quick download and install from the official website of Wondershare Filmora only. The detailed steps for completing this are:

1. Open the official website https://filmora.wondershare.com/video-editor/ of the Wondershare Filmora in your Windows or Mac browser.
2. Go to the “Download” option located in the top right corner of the web page. Click on it to start downloading the Wondershare Filmora installer.
3. Once the download is complete, double-click on it, and accept the terms and conditions. The Wondershare Filmora installer will start running and complete the installation process in a couple of seconds only.
4. Once the installation is complete, Wondershare Filmora will get opened on your system for quick use.

Step2Go to the Titles option

Once Wondershare Filmora is running on your system, it is time to take the first step for customizing the loading text effect. It starts with the titles option where you can select the font of your choice and manage the text spacing. The quick steps for the same are:

1. Start by dropping the default title on track 1.
2. Keep the title up to 17 seconds long.
3. Double-click on the default title to open the font selection.
4. Select the font of your choice from the available options of the numerous fonts.
5. It is easy to change the text loading here.
6. You can increase the text spacing by 15 and then click the ok to close the Titles option.

Step3Go to the My Media option

Now move to the My Media option to add color to the loading text. Here, the blending mode required is also selected. The quick steps to follow in the My Media option are:

1. Open the My Media option and select the red color under the sample color option.
2. Drop red color on track 2.
3. Double-click on the red color and go to the video option.
4. Open the composting option in the video and select the blending mode.
5. Change the blending mode to multiply.

Step4Using the Crop tool

The next step is to move to the crop tool. You have to select the red color ratio and position. The steps for using the crop tool are:

1. Go to the crop tool and select the custom option under the “Ratio” section.
2. Crop red color in the ratio of 80 * 1080.
3. Go to the “Basics” menu located upside to define its position on the left side edge.
4. End the process by placing the playhead at the starting point.

Step5Using Animations option

After the crop tool, it is time to use the animations option to create a loading text effect. You will be placing the keyframes and arranging the playheads in this section. The quick steps for the same are:

1. Add a keyframe to the track and place the playhead to 20 frames further.
2. Start by defining the x-axis position of the red color on the third dot of the “Loading …” text.
3. Now, copy the red color and paste it on the blank space on track two.
4. Next, click on the second keyframe and shift the pasted red color clip on track three to the playhead position.
5. It is time for the third clip now. Click on the second keyframe on the track three clip and define its x-axis position on the second dot of the “Loading …” text.
6. Repeat for track three copying the red color clip and pasting it on the blank space.
7. Click again on the second keyframe on the track three clip and shift the pasted clip to the playhead position.
8. Now, click on the second keyframe of the track four clip and define its x-axis on the first dot of the loading text.
9. You have to repeat the same process until you will the whole “Loading…” text with red color.

Step6Extending the clip durations

After getting the red color in all the loading text, it is time to make the clips in uniformity. All you need to do is extend the clip duration, cut them in uniformity, and place playheads and keyframes accordingly. The detailed steps for the same are:

1. Start by extending every red color clip duration to 17 seconds.
2. Place the playhead at the 14 seconds position and cut all the clips.
3. Delete the extra part left after cutting the clips.
4. Keep track 1 and copy and paste the text on it. Keep the length at 2 seconds only. Leave the rest of the clip part.
5. Start by dropping the red color on track 2 and keep it for 2 seconds duration.
6. Now double-click on the red color and change the “Blending Mode” to multiply.
7. Put the playhead at 14 seconds and add a blank keyframe at the 15th
8. Now put the playhead at the 15 seconds at the 10th frame. Here, define the x-axis position by dragging it from the left to right out of the loading text.

Step7Selecting render preview

The last step but most important is to go for the render preview option. It offers a fast and quick review of the created video file to incorporate any last-minute changes. The quick steps for the same are:

1. Click on the render preview button to see the final preview
2. It will take a few seconds to prepare the rendering frame and will show the preview of the file.

Wrapping Up

Hope everything is clear to you about customizing the loading text effect in Wondershare Filmora. All you need to do is download this amazing video editing software on your Windows and Mac and start using it instantly. It has an easy-to-use interface which is liked by beginners and professionals in video creation like the same.

Wondershare Filmora users can easily start adding customized loading text effects to their videos by accessing the titles menu. Once the font size of the text and other specifications are selected here, you can quickly move to the My Media section to select the color. The next step is to use the crop tool and animations option to bring the red color loading text effect to your video.

Once done with all the steps, it is time to cut the clips and go for the render preview option. Hence, your professional-grade video having the loading text effect is ready. Go for downloading Wondershare Filmora today for creating some exclusive masterpieces.

Free Download For macOS 10.14 or later

The first step to start creating impressive videos using Wondershare Filmora is to download this amazing tool on your Mac or Windows system. It is recommended to go for a quick download and install from the official website of Wondershare Filmora only. The detailed steps for completing this are:

1. Open the official website https://filmora.wondershare.com/video-editor/ of the Wondershare Filmora in your Windows or Mac browser.
2. Go to the “Download” option located in the top right corner of the web page. Click on it to start downloading the Wondershare Filmora installer.
3. Once the download is complete, double-click on it, and accept the terms and conditions. The Wondershare Filmora installer will start running and complete the installation process in a couple of seconds only.
4. Once the installation is complete, Wondershare Filmora will get opened on your system for quick use.

Step2Go to the Titles option

Once Wondershare Filmora is running on your system, it is time to take the first step for customizing the loading text effect. It starts with the titles option where you can select the font of your choice and manage the text spacing. The quick steps for the same are:

1. Start by dropping the default title on track 1.
2. Keep the title up to 17 seconds long.
3. Double-click on the default title to open the font selection.
4. Select the font of your choice from the available options of the numerous fonts.
5. It is easy to change the text loading here.
6. You can increase the text spacing by 15 and then click the ok to close the Titles option.

Step3Go to the My Media option

Now move to the My Media option to add color to the loading text. Here, the blending mode required is also selected. The quick steps to follow in the My Media option are:

1. Open the My Media option and select the red color under the sample color option.
2. Drop red color on track 2.
3. Double-click on the red color and go to the video option.
4. Open the composting option in the video and select the blending mode.
5. Change the blending mode to multiply.

Step4Using the Crop tool

The next step is to move to the crop tool. You have to select the red color ratio and position. The steps for using the crop tool are:

1. Go to the crop tool and select the custom option under the “Ratio” section.
2. Crop red color in the ratio of 80 * 1080.
3. Go to the “Basics” menu located upside to define its position on the left side edge.
4. End the process by placing the playhead at the starting point.

Step5Using Animations option

After the crop tool, it is time to use the animations option to create a loading text effect. You will be placing the keyframes and arranging the playheads in this section. The quick steps for the same are:

1. Add a keyframe to the track and place the playhead to 20 frames further.
2. Start by defining the x-axis position of the red color on the third dot of the “Loading …” text.
3. Now, copy the red color and paste it on the blank space on track two.
4. Next, click on the second keyframe and shift the pasted red color clip on track three to the playhead position.
5. It is time for the third clip now. Click on the second keyframe on the track three clip and define its x-axis position on the second dot of the “Loading …” text.
6. Repeat for track three copying the red color clip and pasting it on the blank space.
7. Click again on the second keyframe on the track three clip and shift the pasted clip to the playhead position.
8. Now, click on the second keyframe of the track four clip and define its x-axis on the first dot of the loading text.
9. You have to repeat the same process until you will the whole “Loading…” text with red color.

Step6Extending the clip durations

After getting the red color in all the loading text, it is time to make the clips in uniformity. All you need to do is extend the clip duration, cut them in uniformity, and place playheads and keyframes accordingly. The detailed steps for the same are:

1. Start by extending every red color clip duration to 17 seconds.
2. Place the playhead at the 14 seconds position and cut all the clips.
3. Delete the extra part left after cutting the clips.
4. Keep track 1 and copy and paste the text on it. Keep the length at 2 seconds only. Leave the rest of the clip part.
5. Start by dropping the red color on track 2 and keep it for 2 seconds duration.
6. Now double-click on the red color and change the “Blending Mode” to multiply.
7. Put the playhead at 14 seconds and add a blank keyframe at the 15th
8. Now put the playhead at the 15 seconds at the 10th frame. Here, define the x-axis position by dragging it from the left to right out of the loading text.

Step7Selecting render preview

The last step but most important is to go for the render preview option. It offers a fast and quick review of the created video file to incorporate any last-minute changes. The quick steps for the same are:

1. Click on the render preview button to see the final preview
2. It will take a few seconds to prepare the rendering frame and will show the preview of the file.

Wrapping Up

Hope everything is clear to you about customizing the loading text effect in Wondershare Filmora. All you need to do is download this amazing video editing software on your Windows and Mac and start using it instantly. It has an easy-to-use interface which is liked by beginners and professionals in video creation like the same.

Wondershare Filmora users can easily start adding customized loading text effects to their videos by accessing the titles menu. Once the font size of the text and other specifications are selected here, you can quickly move to the My Media section to select the color. The next step is to use the crop tool and animations option to bring the red color loading text effect to your video.

Once done with all the steps, it is time to cut the clips and go for the render preview option. Hence, your professional-grade video having the loading text effect is ready. Go for downloading Wondershare Filmora today for creating some exclusive masterpieces.

2 Easy Methods | How To Zoom In On TikTok Videos?

Abundant Video Effects - Wondershare Filmora

Provide abundant video effects - A creative video editor

Powerful color correction and grading

Detailed tutorials are provided by the official channel

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

Try It Free Try It Free

TikTok is one of the most common and grossing social media platforms that is utilized by millions of users in the world. Social media platforms, as a whole, have made a significant impact across their users with their impressive features. With the ability to perform multiple functions across your TikTok recording, it makes it a great choice for many users.

This article comes up with the idea of providing users with a guide on how to zoom in on TikTok videos without putting themselves in a mess. We have put up the best methods that can be performed across the easiest of levels.

In this article

Part 1: Zoom In On TikTok After Recording

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

Part 1: Zoom In On TikTok After Recording

The Zoom In feature across any mobile platform has some specific uses and highlights a particular set of characteristics for its users. While using TikTok, you may find the need to highlight a certain section of the video that you’ve recorded to make it visible to users. It may be something that needs to be shown out of curiosity. To understand how to zoom in on TikTok after recording, go through the detailed steps presented as follows:

Step 1: You need to start the process of downloading and installing TikTok on your device. Launch it on your phone and proceed by clicking the “+” icon on the bottom of the screen to record or create a new video across TikTok.

Step 2: Hold the red button of the recording and effectively create a video of your liking. Leave the button once you are done recording the video. As you’ve recorded the video, click on the “Tick” icon to proceed to the edit page of TikTok.

Step 3: Find yourselves on the editing page of TikTok with a list of multiple editing options across the screen. Click on the “Effects” button and find the “Zoom” effect across the available list. To find the effect, let the editor cursor of the video reach the point where you want to add the Zoom in effect. Once it reaches the point of the video, hold the “Zoom” effect button for the specific time that you want to add the effect to your video. You can then conclude editing your video on TikTok and proceed to save it.

Advantages of Zooming Videos After Recording

• This puts you in more control of the video rather than improvising the need to zoom in on a video during recording.
• Zoom into the specific part or portion of the video that you find necessary for covering the purpose. You cannot perform such actions while recording a video since the recording is quite restricted across a device.
• Adding zoom in effect across the video gives it a proper effect that enhances the quality rather than depreciating it.

Disadvantages of Zooming Videos After Recording

• If you put in a zoom in effect on your video, this cannot be reverted back or zoomed out.
• The frame rate of the video is heavily damaged by using such effects across your recorded video. As this is done through the software, there is a guaranteed decrease in the quality output of the video.

Part 2: Zoom In TikTok Videos Using Wondershare Filmora

The default TikTok platform does provide you with the option of zooming in on your videos after recording. This, however, had its disadvantages which have been featured above. As you are aware of these drawbacks, it is necessary for you to go through other options that are proficient and better for users on a similar scale.

Wondershare Filmora has made its name as a video editor in the market. With simple tools like adding zoom in effects across videos, it makes it software accessible for all users. Find out how to zoom in on TikTok using Wondershare Filmora with the steps exclaimed as follows:

Step 1: Download and Install Wondershare Filmora

For starters, you need to download and install the latest version of Wondershare Filmora across your computer. Once installed, launch the platform and click on “New Project” to start working on a project from scratch.

Step 2: Upload Video

As a new canvas opens on your front, you need to click on the “Arrow Head” icon under the “Media” tab to import the video file from TikTok that needs to be zoomed in.

Step 3: Cut Video Part to Slow Zoom

Dissect the specific part of the video that you want to put in the slow zoom feature from Filmora. Take the red indicator across the timeline to the point where you want to start the specific part. Click the split icon on the red line to divide the video. Drag the indicator to the point where you want to end the specific part of the video for the slow zoom feature.

Step 4: Set the Speed of the Clip

Select the split part of the video and find the “Speed” icon on the edit menu at the top of the timeline. Select an appropriate speed that you want to work according to. You can find speeds as low as 0.5x in the ‘Slow’ section and speeds as high as 2x in the ‘Fast’ section.

Step 5: Add Animation Keyframes

To add animation keyframes, right-click on a certain clip of the TikTok video and select the “Add Animation” button from the option of “Animation” in the drop-down menu. Go across the “Customize” section in the “Animation” tab across the menu that opens up and move the indicator where you want to create a keyframe. Click on “Add’ and find a keyframe added to the video. Move the indicator further along the clip to add another animation, as two keyframes create an animation keyframe.

Step 6: Scale Clip Edge

Once you are done adjusting your TikTok video, it is time to scale the clip according to your required settings. Double-click on the video to open a new set of settings on your front. Proceed by opening the menu of “Transform” across the menu. Find the “Scale” option in the provided list and adjust the scale settings as required. Once you are done, click on the “Export” button to conclude the process.

Conclusion

Have you gone through the reasons that provide you the ability to zoom in on a TikTok video with ease? We are hopeful that you’ve learned the process of how to zoom in on TikTok videos with different tools and features. Go through the provided details to know more about the process and make yourselves perfect in executing the process.

Try It Free Try It Free

How to Download and Use Windows Movie Maker 10

Looking to create captivating movies from video clips? The best tool for the purpose can be the Windows movie maker 10. The program provides video editors with various tools to create professional-looking videos, including audio options, animations, transition overlays, and timeline narrations. Its functions are simple to use and enjoyable to explore, and its XML code enables users to create new effects and transitions or change current ones. Windows Movie Maker also allows for basic track editings, such as adding fade-in and fade-out features for audio tracks.

It’s also simple to upload finished Windows Movie Maker productions to social media platforms. One of the best benefits of using the Window Movie Maker is its user-friendliness, simple controls, and automatic preview. This program is perfect for beginners, and it comes free on the Windows PC with workflow and essential features in the video editing systems that are made for professionals. Let’s check out how you can download and use Windows Movie Maker and the alternative of this program.

Part 1. How to Download Windows Movie Maker on Win 10?

Who loved the older version of Windows Movie Maker, which was easy to use and a free editing tool? You might have searched “Where is movie maker in windows 10“ in google. If you are missing your favorite video editor, this article will help you download and install the Windows Movie Maker for your PC, which runs on Windows 10. You can download it from their official application; the best part is that it is free of cost. Now here are some steps by which you can download and install the Windows Movie Maker on your Windows 10:-

• Download the installer file of Movie Maker:- Authentic Movie Maker can be easily downloaded through Windows Essentials.
• Extract Zip file:- After completing your download process, you can extract the zip file and run the .exe file. Your Windows essentials will get started.
• Choose programs you wish to install:- You can install all Windows essentials, tap on select the programs you wish to install. Here you can have an option for selecting Movie Maker.

• Choose movie Maker and photo gallery:- On the screen, you must choose “Movie Maker and Photo Gallery” because you will install it on your PC. A simple tap on “Install,” and you will be ready, and the installation procedure will start.

• Launch Movie Maker:- Visit the Start menu and type Movie Maker to launch the app. Open the app and use it. It is a free and easy video editor.

Part 2. How to Edit Videos with Windows Movie Maker?

Before starting your editing on Win10 movie maker, you must ensure that the movie maker supports the format. It’s because it accepts a few formats that includes:- MP3, .WAV, .WMA, .AVI(DV-AVI), .MPG(MPEG-1), .ASF/.WMV. If the videos are not supported in the Moviemaker for Windows 10, you might need to use a converter to convert the video and import the files into it.

Step1 Import clips to movie maker

• To import the photo or video in Windows Movie Maker, click “Add Photos or Videos.” A window will get opened, and users might select a video from their computer.
• After you select the files, you can click on “OK” to import the files to the storyboard.

Step2 Combine/Split/Cut/Trim the videos

You can preview the clips in the preview box. Users can use the Next or Previous Frame to preview the clips. While editing the video, you might have to trim the unwanted part and combine multiple clips into a new one.

To remove the video parts, you can select the “Start frame” of the video you wish to eliminate, tap on a split button for splitting the segment, select the end frame you wish to remove, and tap on the “Split” option again. You can do it numerous times to edit the video.

Step3 Apply visual effects and transitions to the clips

Once you have the clips for your video, you can add transitions to your video. You can click on Animations to view various options. You will have to choose the clip and add some transitions which you wish.

The software will do the work. You can preview the result by tapping on “Play.” After applying the visual effects, you will have to click on the Visual effects to add filter and overlays, and users can apply the effects to the clip.

Step4 Edit audio in the video

Are you planning to add some music to the video? You will have to double-click on your clip to enter into “Edit Panel” and click on the Volume button. You can mute or adjust the volume with the help of a volume slider, which will affect every sound of the clip.

After you adjust the sound of your clips, you can add your music to video clips. Add the music by tapping “Add Music” and choosing music for importing. One can even add the music from the PC.

Step5 Add text and title to the video

Windows Movie Maker allows users to add several types of texts to their videos. You can see three buttons that allow several types of texts to their video:- rolling credits, captions, and stationary title. Tap on the title; you will get options to add text before your video begins.

Choose a caption that you will add to your video frames and tap on the Credits to add effects to the video. After selecting the text type, one can enter the test and edit text effects. You can change the text visuals, duration, outline size, etc.

Step6 Save and Publish

After you have completed your edits, you can save your video by tapping on “File” and then clicking on Publish Movie. One can even choose the place where you wish to save your file.

You can even save the videos on your PC with various formats and resolutions. This editor allows users to save their videos for mobile devices or Email.

Part 3. Movie Maker Alternatives for Win 10 PC

If you want to create a polished clip for public consumption or if you want to experiment with your creativity while learning a new art form, Wondershare Filmora has swiftly established itself as one of the finest Windows 10 movie maker alternatives. Both seasoned and first-time users may successfully produce amazing videos with special effects thanks to Filmora’s user-friendly and straightforward interface. Wondershare Filmora supports a vast range of video formats, including AVCHD, MOV, AVI, MP4, and more. This allows you to combine, split, trim, crop and cut the clips in a few clicks. Now let’s see how you can edit your videos in Wondershare Filmora:-

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Create a new project and import the video

Tap “New Project” on the welcome screen and get into a video editor. Click on the “Register” option to register the product. Go to the “File” menu and tap on “Project Setting,” choose the ratio, and cut the video.

You can select from options like 4:3 or 16:9 ratios and customize the ratio according to your needs.

Step2 Place the audio and video files on the timeline and cut the unwanted parts

The raw clips mostly contain unwanted parts and mistakes which don’t belong in the video. If you want to trim or cut the videos, you can drag the video from your Media Tab and drop it on your timeline.

Users can add numerous video clips, but every file you will add will get placed after the previous clip. If you want to rearrange it, you can drag the clips to desired positions.

Step3 Apply the visual effects to your clips

Now that you have removed the unwanted parts from the video clips, you will have to detach the video and audio files, insert transitions, and add music to the clips or use a few visual effects of the Filmora software.

Click on the Credit or Text icon to add subtitles, end credits, or opening titles to the video. This software offers various text templates that you can utilize for your video.

Step4 Use color correction

You can utilize the hundreds of filters and overlays available under the Effects icon in your projects to give the colors in the clip a more vibrant appearance. Please drag & drop the filter you wish to use onto the timeline by clicking the icon and choosing it.

Simply sliding any end of a filter will change how long it lasts. After you are done with everything, save and publish it.

Conclusion

Now, you know the steps to download Windows Movie Maker on your PC. You can use it easily because of its friendly user interface. Editing and publishing videos with Windows Movie Maker becomes easy, and it is a perfect fit for beginners. But if you want something that supports everything, you can choose Wondershare Filmora because it is the best alternative to Windows movie maker. Wondershare Filmora offers limitless editing features and supports every video format. One can easily do professional-level editing in this user-friendly video editing software.

Free Download For macOS 10.14 or later

Step1 Create a new project and import the video

Tap “New Project” on the welcome screen and get into a video editor. Click on the “Register” option to register the product. Go to the “File” menu and tap on “Project Setting,” choose the ratio, and cut the video.

You can select from options like 4:3 or 16:9 ratios and customize the ratio according to your needs.

Step2 Place the audio and video files on the timeline and cut the unwanted parts

The raw clips mostly contain unwanted parts and mistakes which don’t belong in the video. If you want to trim or cut the videos, you can drag the video from your Media Tab and drop it on your timeline.

Users can add numerous video clips, but every file you will add will get placed after the previous clip. If you want to rearrange it, you can drag the clips to desired positions.

Step3 Apply the visual effects to your clips

Now that you have removed the unwanted parts from the video clips, you will have to detach the video and audio files, insert transitions, and add music to the clips or use a few visual effects of the Filmora software.

Click on the Credit or Text icon to add subtitles, end credits, or opening titles to the video. This software offers various text templates that you can utilize for your video.

Step4 Use color correction

You can utilize the hundreds of filters and overlays available under the Effects icon in your projects to give the colors in the clip a more vibrant appearance. Please drag & drop the filter you wish to use onto the timeline by clicking the icon and choosing it.

Simply sliding any end of a filter will change how long it lasts. After you are done with everything, save and publish it.

Conclusion

Now, you know the steps to download Windows Movie Maker on your PC. You can use it easily because of its friendly user interface. Editing and publishing videos with Windows Movie Maker becomes easy, and it is a perfect fit for beginners. But if you want something that supports everything, you can choose Wondershare Filmora because it is the best alternative to Windows movie maker. Wondershare Filmora offers limitless editing features and supports every video format. One can easily do professional-level editing in this user-friendly video editing software.

Also read: