:max_bytes(150000):strip_icc():format(webp)/001_the-best-disney-plus-movies-right-now-4846938-6783e356feb74fb7a09b84953620c5ed.jpg)
New How to Record Super Slow Motion Videos on Your Phone?
How to Record Super Slow Motion Videos on Your Phone?
Super Slow Motion has long been among the finest (and most exploited) video effects. The method was initially limited to high-end lenses, but super slo-mo has become increasingly superior as smartphone technology advances.
Super slo-mo is a terrific technique to learn how to use if you want to accentuate a dramatic moment or extend the humiliation of a friend you captured in an embarrassing scenario. This article has stepwise guides and tips for recording super slo-mo on your phone. Let’s get going!
In this article
01 What’s the Difference Between Slow-Mo and Super Slow-Mo?
02 How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
03 How to Edit Super Slow Motion Video in Samsung Galaxy S21?
04 How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
05 How to Shoot Slo-Mo Videos on iPhone?
06 Tips for Recording Super Slow Motion Video
Part 1: What’s the Difference Between Slow-Mo and Super Slow-Mo?
Super Slow-Mo (960fps) is a technology that allows users to shoot films at 960fps using a top-speed lens, capturing events that the naked eye cannot ordinarily notice by viewing them 32 times slower than regular videos (30fps) and four times slower than videos produced using the current Slow Motion feature (240fps).
Super Slow-mo movie may be displayed as 6-12 sec long on old smartphones, such as Galaxy S9/S9+ and Note9. However, the newer versions, such as Galaxy S10 Series, can play super slow-mo movies up to 14.8 sec.
You’ll understand the difference between the Slow-Mo and Super Slow-Mo better after reading the below information:
Slow Motion
Video is produced at an 8-times slower rate than usual, equivalent to the speed of a movie, advertisement, or sporting event.
Super Slow Motion
Videos are played 32 times slower than usual, catching minute changes in facial gestures and fast-moving elements.
Part 2: How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
Models That Support Super Slow-Mo: Galaxy S20, Galaxy S20+, Galaxy S20+ Ultra, Galaxy Z Flip, and later models.
Slow-motion video is often created by filming at a fast frame per second (fps) speed and then playing back at a far slower pace. This results in intriguing videos with slowed-down motion. The event is captured at 960 frames per second with the Super Slow-mo function, four times quicker than conventional slow motion. When it’s replayed at 30 frames per second, it’s 32 times slower, making mundane moments appear spectacular.
To capture super slow-motion videos with your Samsung Galaxy S20 and later models, follow the instructions below:
Step 1: Launch the camera on your phone by tapping the Camera app.
Step 2: Now, click on the Super Slow-Mo option to proceed.
Step 3: Press the White Circle in the center to start the recording and press it again to stop when you are done.
Note: Make sure that your phone’s video resolution is already on HD because Super Slow-Mo only supports HD resolutions.
Part 3: How to Edit Super Slow Motion Video in Samsung Galaxy S21?
Only capturing the super slow-motion videos is not enough, especially if you are a content creator. Even in the super slow-mo, there might be some unnecessary parts (since it is more detailed) that you need to cut out or the parts that need some enhancements to make the video look captivating.
However, not every phone is eligible to edit super slow-mo videos by not degrading the video resolutions. But Samsung Galaxy S21 allows you to do that by keeping the video resolution intact. You can edit the Super Slow-Mo videos with Galaxy S21 by following these instructions:
Step 1: Open the Camera app and navigate the super slow-mo video you wish to edit.
Step 2: Now, play it and tap the screen. You will see three vertical dots in the right corner. Click on them.
Step 3: Select the Editor option from the dropdown menu that appears.
Step 4: After that, you can adjust the length, crop the video, add effects, add stickers, add music, etc., by selecting from the bottom menu.
Step 5: After you’re done editing, click on the Save option at the top to save the video to your Gallery.
Part 4: How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
Models That Support Super Slow-Mo: Huawei Mate 20/20 Pro/20 X and later Mate models.
Before we demonstrate how to capture a super slow-mo with a Huawei Mate 20 and later models, we’ll explain this popular capture mode.
To begin, you should be aware that a camera/camera sensor collects a specific number of frames per second. The movie becomes legible by combining these pictures; the more images there are, the more fluent the video will be. The naked eye is thought to decipher about 60 pictures every second.
The benefit of improved camera sensors is that you can capture a maximum number of photos per second (some smartphones can record up to 960 / second) and slow down the sampling rate to produce a super slow-motion effect on the Huawei Mate 20 or later models.
Now, follow the stepwise guide to record super slow-mo with Huawei Mate 40 or later models:
Step 1: Launch your phone’s Camera go to More to select the Slow-Mo option.
Step 2: By default, you will see 4x on the slow-mo capture mode, which means the video will be recorded at 120FPS. Huawei Mate 40 allows you to capture up to 128X, i.e, 3840FPS for fast moving objects. To enable the Super Slo-Mo feature, select the 32X or 128X in this mode.
Step 3: Click on the Circle in the center to start and stop the recording. The video will be saved in your Gallery.
Part 5: How to Shoot Slo-Mo Videos on iPhone?
Slow-motion film on your iPhone essentially means slowing the fps so that everything appears to move slower inside the video. It is a popular effect employed by artists to produce one-of-a-kind video clips of sports footage, natural scenes, or sequences with a lot of dramatic motion.
Slow-motion films are supported by all iPhones, beginning with the 5S model, and the capability gets more robust and more stable with each successive generation. Shooting slow-motion films with your iPhone are addicting and enjoyable, and it adds drama to various settings.
Here is a step-by-step method for filming slow-mo with an iPhone, regardless of model.
Step 1: Launch the Camera app on your iPhone and go to the Slow-Mo effect by sliding from the options above. Change the frame rate on the upper right corner to 120, 240, 720, depending on the iPhone models you’re using.
Step 2: Now, start the recording by clicking the Red Circle in the center or either of the Volume button.
Step 3: After you’re done recording, press the Red Circle again and head towards the Gallery to view the recorded video.
For more details, check: How to make slo-mo video on your iPhone.
Part 6: Tips for Recording Super Slow Motion Video
Although super slow-motion videos are easy to record, they can be challenging for a content creator. But don’t worry, with the following tips, we have got you covered:
Utilize A Tripod
It’s critical to keep your phone as steady as possible when filming in Super Slow-mo since shaking might conflict with your video and hinder it from recognizing motions when set to auto-record. To get the most out of Super Slow-mo, we recommend using a tripod whenever feasible.
You can check these tripods for iPhone
Transition Between Single and Multi-Takes
To boost your chances of catching the ideal timing in Super Slow-mo, your phone allows you to record in Multi-Take mode, which can capture many bursts of Super Slow-mo in one video.
When combined with an auto record, additional Super Slow-mo videos will be captured as much as the focus box senses activity and will end only when you end filming. The manual record works similarly. However, you’ll have to physically hit the trigger each time you wish to record a picture in Super Slow-mo.
As the name indicates, Single-Take will record a single Super Slow-mo clip and then cease recording a moment or two later. Because Multi-Take clips are often more extensive, this could save a large storage capacity.
Readjust the Focus
The focus or auto-recording is tiny by default. Fortunately, you can enlarge it to improve its odds of recognizing movement. To adjust the size of the box, hold it until only its edges are visible, then move any corner from the others to expand the box’s area. Simply tap anywhere outside the borders to verify the adjustment when you’re happy with the size.
Capture in Natural Light
Because of the large number of frames it collects, Super Slow-mo works the best in natural daylight situations. Though not visible to the human eye, indoor lighting, especially LED bulbs and tiny fluorescents, seems to flash at very high rates. Even if the environment is well-lit, Super Slow-mo detects this and shows your subject in a substantially darker tone.
View the Video at Normal Speed
If you wish to watch your Super Slow-mo movies at regular speed, deactivate Super Slow-mo playing by tapping on the option directly below the video. This will give you a greater understanding of your phone’s incredible capacity to bring the world to a halt.
Learn more about : How to Convert normal video to slo-mo video?
Besides the tips mentioned above, you can also watch this video to get some tips and tricks in recording slo-mo video with iPhone.
Conclusion
Super Slow Motion videos are excellent for showcasing the action and conveying tales, and they are also entertaining and straightforward to create. Your only constraints are time and imagination. However, your Android or iPhone’s camera has many more tricks in its sleeve: Live images, time-lapse, Panoramas, and Portrait mode let you express yourself freely!
02 How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
03 How to Edit Super Slow Motion Video in Samsung Galaxy S21?
04 How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
05 How to Shoot Slo-Mo Videos on iPhone?
06 Tips for Recording Super Slow Motion Video
Part 1: What’s the Difference Between Slow-Mo and Super Slow-Mo?
Super Slow-Mo (960fps) is a technology that allows users to shoot films at 960fps using a top-speed lens, capturing events that the naked eye cannot ordinarily notice by viewing them 32 times slower than regular videos (30fps) and four times slower than videos produced using the current Slow Motion feature (240fps).
Super Slow-mo movie may be displayed as 6-12 sec long on old smartphones, such as Galaxy S9/S9+ and Note9. However, the newer versions, such as Galaxy S10 Series, can play super slow-mo movies up to 14.8 sec.
You’ll understand the difference between the Slow-Mo and Super Slow-Mo better after reading the below information:
Slow Motion
Video is produced at an 8-times slower rate than usual, equivalent to the speed of a movie, advertisement, or sporting event.
Super Slow Motion
Videos are played 32 times slower than usual, catching minute changes in facial gestures and fast-moving elements.
Part 2: How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
Models That Support Super Slow-Mo: Galaxy S20, Galaxy S20+, Galaxy S20+ Ultra, Galaxy Z Flip, and later models.
Slow-motion video is often created by filming at a fast frame per second (fps) speed and then playing back at a far slower pace. This results in intriguing videos with slowed-down motion. The event is captured at 960 frames per second with the Super Slow-mo function, four times quicker than conventional slow motion. When it’s replayed at 30 frames per second, it’s 32 times slower, making mundane moments appear spectacular.
To capture super slow-motion videos with your Samsung Galaxy S20 and later models, follow the instructions below:
Step 1: Launch the camera on your phone by tapping the Camera app.
Step 2: Now, click on the Super Slow-Mo option to proceed.
Step 3: Press the White Circle in the center to start the recording and press it again to stop when you are done.
Note: Make sure that your phone’s video resolution is already on HD because Super Slow-Mo only supports HD resolutions.
Part 3: How to Edit Super Slow Motion Video in Samsung Galaxy S21?
Only capturing the super slow-motion videos is not enough, especially if you are a content creator. Even in the super slow-mo, there might be some unnecessary parts (since it is more detailed) that you need to cut out or the parts that need some enhancements to make the video look captivating.
However, not every phone is eligible to edit super slow-mo videos by not degrading the video resolutions. But Samsung Galaxy S21 allows you to do that by keeping the video resolution intact. You can edit the Super Slow-Mo videos with Galaxy S21 by following these instructions:
Step 1: Open the Camera app and navigate the super slow-mo video you wish to edit.
Step 2: Now, play it and tap the screen. You will see three vertical dots in the right corner. Click on them.
Step 3: Select the Editor option from the dropdown menu that appears.
Step 4: After that, you can adjust the length, crop the video, add effects, add stickers, add music, etc., by selecting from the bottom menu.
Step 5: After you’re done editing, click on the Save option at the top to save the video to your Gallery.
Part 4: How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
Models That Support Super Slow-Mo: Huawei Mate 20/20 Pro/20 X and later Mate models.
Before we demonstrate how to capture a super slow-mo with a Huawei Mate 20 and later models, we’ll explain this popular capture mode.
To begin, you should be aware that a camera/camera sensor collects a specific number of frames per second. The movie becomes legible by combining these pictures; the more images there are, the more fluent the video will be. The naked eye is thought to decipher about 60 pictures every second.
The benefit of improved camera sensors is that you can capture a maximum number of photos per second (some smartphones can record up to 960 / second) and slow down the sampling rate to produce a super slow-motion effect on the Huawei Mate 20 or later models.
Now, follow the stepwise guide to record super slow-mo with Huawei Mate 40 or later models:
Step 1: Launch your phone’s Camera go to More to select the Slow-Mo option.
Step 2: By default, you will see 4x on the slow-mo capture mode, which means the video will be recorded at 120FPS. Huawei Mate 40 allows you to capture up to 128X, i.e, 3840FPS for fast moving objects. To enable the Super Slo-Mo feature, select the 32X or 128X in this mode.
Step 3: Click on the Circle in the center to start and stop the recording. The video will be saved in your Gallery.
Part 5: How to Shoot Slo-Mo Videos on iPhone?
Slow-motion film on your iPhone essentially means slowing the fps so that everything appears to move slower inside the video. It is a popular effect employed by artists to produce one-of-a-kind video clips of sports footage, natural scenes, or sequences with a lot of dramatic motion.
Slow-motion films are supported by all iPhones, beginning with the 5S model, and the capability gets more robust and more stable with each successive generation. Shooting slow-motion films with your iPhone are addicting and enjoyable, and it adds drama to various settings.
Here is a step-by-step method for filming slow-mo with an iPhone, regardless of model.
Step 1: Launch the Camera app on your iPhone and go to the Slow-Mo effect by sliding from the options above. Change the frame rate on the upper right corner to 120, 240, 720, depending on the iPhone models you’re using.
Step 2: Now, start the recording by clicking the Red Circle in the center or either of the Volume button.
Step 3: After you’re done recording, press the Red Circle again and head towards the Gallery to view the recorded video.
For more details, check: How to make slo-mo video on your iPhone.
Part 6: Tips for Recording Super Slow Motion Video
Although super slow-motion videos are easy to record, they can be challenging for a content creator. But don’t worry, with the following tips, we have got you covered:
Utilize A Tripod
It’s critical to keep your phone as steady as possible when filming in Super Slow-mo since shaking might conflict with your video and hinder it from recognizing motions when set to auto-record. To get the most out of Super Slow-mo, we recommend using a tripod whenever feasible.
You can check these tripods for iPhone
Transition Between Single and Multi-Takes
To boost your chances of catching the ideal timing in Super Slow-mo, your phone allows you to record in Multi-Take mode, which can capture many bursts of Super Slow-mo in one video.
When combined with an auto record, additional Super Slow-mo videos will be captured as much as the focus box senses activity and will end only when you end filming. The manual record works similarly. However, you’ll have to physically hit the trigger each time you wish to record a picture in Super Slow-mo.
As the name indicates, Single-Take will record a single Super Slow-mo clip and then cease recording a moment or two later. Because Multi-Take clips are often more extensive, this could save a large storage capacity.
Readjust the Focus
The focus or auto-recording is tiny by default. Fortunately, you can enlarge it to improve its odds of recognizing movement. To adjust the size of the box, hold it until only its edges are visible, then move any corner from the others to expand the box’s area. Simply tap anywhere outside the borders to verify the adjustment when you’re happy with the size.
Capture in Natural Light
Because of the large number of frames it collects, Super Slow-mo works the best in natural daylight situations. Though not visible to the human eye, indoor lighting, especially LED bulbs and tiny fluorescents, seems to flash at very high rates. Even if the environment is well-lit, Super Slow-mo detects this and shows your subject in a substantially darker tone.
View the Video at Normal Speed
If you wish to watch your Super Slow-mo movies at regular speed, deactivate Super Slow-mo playing by tapping on the option directly below the video. This will give you a greater understanding of your phone’s incredible capacity to bring the world to a halt.
Learn more about : How to Convert normal video to slo-mo video?
Besides the tips mentioned above, you can also watch this video to get some tips and tricks in recording slo-mo video with iPhone.
Conclusion
Super Slow Motion videos are excellent for showcasing the action and conveying tales, and they are also entertaining and straightforward to create. Your only constraints are time and imagination. However, your Android or iPhone’s camera has many more tricks in its sleeve: Live images, time-lapse, Panoramas, and Portrait mode let you express yourself freely!
02 How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
03 How to Edit Super Slow Motion Video in Samsung Galaxy S21?
04 How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
05 How to Shoot Slo-Mo Videos on iPhone?
06 Tips for Recording Super Slow Motion Video
Part 1: What’s the Difference Between Slow-Mo and Super Slow-Mo?
Super Slow-Mo (960fps) is a technology that allows users to shoot films at 960fps using a top-speed lens, capturing events that the naked eye cannot ordinarily notice by viewing them 32 times slower than regular videos (30fps) and four times slower than videos produced using the current Slow Motion feature (240fps).
Super Slow-mo movie may be displayed as 6-12 sec long on old smartphones, such as Galaxy S9/S9+ and Note9. However, the newer versions, such as Galaxy S10 Series, can play super slow-mo movies up to 14.8 sec.
You’ll understand the difference between the Slow-Mo and Super Slow-Mo better after reading the below information:
Slow Motion
Video is produced at an 8-times slower rate than usual, equivalent to the speed of a movie, advertisement, or sporting event.
Super Slow Motion
Videos are played 32 times slower than usual, catching minute changes in facial gestures and fast-moving elements.
Part 2: How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
Models That Support Super Slow-Mo: Galaxy S20, Galaxy S20+, Galaxy S20+ Ultra, Galaxy Z Flip, and later models.
Slow-motion video is often created by filming at a fast frame per second (fps) speed and then playing back at a far slower pace. This results in intriguing videos with slowed-down motion. The event is captured at 960 frames per second with the Super Slow-mo function, four times quicker than conventional slow motion. When it’s replayed at 30 frames per second, it’s 32 times slower, making mundane moments appear spectacular.
To capture super slow-motion videos with your Samsung Galaxy S20 and later models, follow the instructions below:
Step 1: Launch the camera on your phone by tapping the Camera app.
Step 2: Now, click on the Super Slow-Mo option to proceed.
Step 3: Press the White Circle in the center to start the recording and press it again to stop when you are done.
Note: Make sure that your phone’s video resolution is already on HD because Super Slow-Mo only supports HD resolutions.
Part 3: How to Edit Super Slow Motion Video in Samsung Galaxy S21?
Only capturing the super slow-motion videos is not enough, especially if you are a content creator. Even in the super slow-mo, there might be some unnecessary parts (since it is more detailed) that you need to cut out or the parts that need some enhancements to make the video look captivating.
However, not every phone is eligible to edit super slow-mo videos by not degrading the video resolutions. But Samsung Galaxy S21 allows you to do that by keeping the video resolution intact. You can edit the Super Slow-Mo videos with Galaxy S21 by following these instructions:
Step 1: Open the Camera app and navigate the super slow-mo video you wish to edit.
Step 2: Now, play it and tap the screen. You will see three vertical dots in the right corner. Click on them.
Step 3: Select the Editor option from the dropdown menu that appears.
Step 4: After that, you can adjust the length, crop the video, add effects, add stickers, add music, etc., by selecting from the bottom menu.
Step 5: After you’re done editing, click on the Save option at the top to save the video to your Gallery.
Part 4: How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
Models That Support Super Slow-Mo: Huawei Mate 20/20 Pro/20 X and later Mate models.
Before we demonstrate how to capture a super slow-mo with a Huawei Mate 20 and later models, we’ll explain this popular capture mode.
To begin, you should be aware that a camera/camera sensor collects a specific number of frames per second. The movie becomes legible by combining these pictures; the more images there are, the more fluent the video will be. The naked eye is thought to decipher about 60 pictures every second.
The benefit of improved camera sensors is that you can capture a maximum number of photos per second (some smartphones can record up to 960 / second) and slow down the sampling rate to produce a super slow-motion effect on the Huawei Mate 20 or later models.
Now, follow the stepwise guide to record super slow-mo with Huawei Mate 40 or later models:
Step 1: Launch your phone’s Camera go to More to select the Slow-Mo option.
Step 2: By default, you will see 4x on the slow-mo capture mode, which means the video will be recorded at 120FPS. Huawei Mate 40 allows you to capture up to 128X, i.e, 3840FPS for fast moving objects. To enable the Super Slo-Mo feature, select the 32X or 128X in this mode.
Step 3: Click on the Circle in the center to start and stop the recording. The video will be saved in your Gallery.
Part 5: How to Shoot Slo-Mo Videos on iPhone?
Slow-motion film on your iPhone essentially means slowing the fps so that everything appears to move slower inside the video. It is a popular effect employed by artists to produce one-of-a-kind video clips of sports footage, natural scenes, or sequences with a lot of dramatic motion.
Slow-motion films are supported by all iPhones, beginning with the 5S model, and the capability gets more robust and more stable with each successive generation. Shooting slow-motion films with your iPhone are addicting and enjoyable, and it adds drama to various settings.
Here is a step-by-step method for filming slow-mo with an iPhone, regardless of model.
Step 1: Launch the Camera app on your iPhone and go to the Slow-Mo effect by sliding from the options above. Change the frame rate on the upper right corner to 120, 240, 720, depending on the iPhone models you’re using.
Step 2: Now, start the recording by clicking the Red Circle in the center or either of the Volume button.
Step 3: After you’re done recording, press the Red Circle again and head towards the Gallery to view the recorded video.
For more details, check: How to make slo-mo video on your iPhone.
Part 6: Tips for Recording Super Slow Motion Video
Although super slow-motion videos are easy to record, they can be challenging for a content creator. But don’t worry, with the following tips, we have got you covered:
Utilize A Tripod
It’s critical to keep your phone as steady as possible when filming in Super Slow-mo since shaking might conflict with your video and hinder it from recognizing motions when set to auto-record. To get the most out of Super Slow-mo, we recommend using a tripod whenever feasible.
You can check these tripods for iPhone
Transition Between Single and Multi-Takes
To boost your chances of catching the ideal timing in Super Slow-mo, your phone allows you to record in Multi-Take mode, which can capture many bursts of Super Slow-mo in one video.
When combined with an auto record, additional Super Slow-mo videos will be captured as much as the focus box senses activity and will end only when you end filming. The manual record works similarly. However, you’ll have to physically hit the trigger each time you wish to record a picture in Super Slow-mo.
As the name indicates, Single-Take will record a single Super Slow-mo clip and then cease recording a moment or two later. Because Multi-Take clips are often more extensive, this could save a large storage capacity.
Readjust the Focus
The focus or auto-recording is tiny by default. Fortunately, you can enlarge it to improve its odds of recognizing movement. To adjust the size of the box, hold it until only its edges are visible, then move any corner from the others to expand the box’s area. Simply tap anywhere outside the borders to verify the adjustment when you’re happy with the size.
Capture in Natural Light
Because of the large number of frames it collects, Super Slow-mo works the best in natural daylight situations. Though not visible to the human eye, indoor lighting, especially LED bulbs and tiny fluorescents, seems to flash at very high rates. Even if the environment is well-lit, Super Slow-mo detects this and shows your subject in a substantially darker tone.
View the Video at Normal Speed
If you wish to watch your Super Slow-mo movies at regular speed, deactivate Super Slow-mo playing by tapping on the option directly below the video. This will give you a greater understanding of your phone’s incredible capacity to bring the world to a halt.
Learn more about : How to Convert normal video to slo-mo video?
Besides the tips mentioned above, you can also watch this video to get some tips and tricks in recording slo-mo video with iPhone.
Conclusion
Super Slow Motion videos are excellent for showcasing the action and conveying tales, and they are also entertaining and straightforward to create. Your only constraints are time and imagination. However, your Android or iPhone’s camera has many more tricks in its sleeve: Live images, time-lapse, Panoramas, and Portrait mode let you express yourself freely!
02 How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
03 How to Edit Super Slow Motion Video in Samsung Galaxy S21?
04 How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
05 How to Shoot Slo-Mo Videos on iPhone?
06 Tips for Recording Super Slow Motion Video
Part 1: What’s the Difference Between Slow-Mo and Super Slow-Mo?
Super Slow-Mo (960fps) is a technology that allows users to shoot films at 960fps using a top-speed lens, capturing events that the naked eye cannot ordinarily notice by viewing them 32 times slower than regular videos (30fps) and four times slower than videos produced using the current Slow Motion feature (240fps).
Super Slow-mo movie may be displayed as 6-12 sec long on old smartphones, such as Galaxy S9/S9+ and Note9. However, the newer versions, such as Galaxy S10 Series, can play super slow-mo movies up to 14.8 sec.
You’ll understand the difference between the Slow-Mo and Super Slow-Mo better after reading the below information:
Slow Motion
Video is produced at an 8-times slower rate than usual, equivalent to the speed of a movie, advertisement, or sporting event.
Super Slow Motion
Videos are played 32 times slower than usual, catching minute changes in facial gestures and fast-moving elements.
Part 2: How to Record Super Slo-Mo Videos with Samsung Galaxy S20 and Later models?
Models That Support Super Slow-Mo: Galaxy S20, Galaxy S20+, Galaxy S20+ Ultra, Galaxy Z Flip, and later models.
Slow-motion video is often created by filming at a fast frame per second (fps) speed and then playing back at a far slower pace. This results in intriguing videos with slowed-down motion. The event is captured at 960 frames per second with the Super Slow-mo function, four times quicker than conventional slow motion. When it’s replayed at 30 frames per second, it’s 32 times slower, making mundane moments appear spectacular.
To capture super slow-motion videos with your Samsung Galaxy S20 and later models, follow the instructions below:
Step 1: Launch the camera on your phone by tapping the Camera app.
Step 2: Now, click on the Super Slow-Mo option to proceed.
Step 3: Press the White Circle in the center to start the recording and press it again to stop when you are done.
Note: Make sure that your phone’s video resolution is already on HD because Super Slow-Mo only supports HD resolutions.
Part 3: How to Edit Super Slow Motion Video in Samsung Galaxy S21?
Only capturing the super slow-motion videos is not enough, especially if you are a content creator. Even in the super slow-mo, there might be some unnecessary parts (since it is more detailed) that you need to cut out or the parts that need some enhancements to make the video look captivating.
However, not every phone is eligible to edit super slow-mo videos by not degrading the video resolutions. But Samsung Galaxy S21 allows you to do that by keeping the video resolution intact. You can edit the Super Slow-Mo videos with Galaxy S21 by following these instructions:
Step 1: Open the Camera app and navigate the super slow-mo video you wish to edit.
Step 2: Now, play it and tap the screen. You will see three vertical dots in the right corner. Click on them.
Step 3: Select the Editor option from the dropdown menu that appears.
Step 4: After that, you can adjust the length, crop the video, add effects, add stickers, add music, etc., by selecting from the bottom menu.
Step 5: After you’re done editing, click on the Save option at the top to save the video to your Gallery.
Part 4: How to Record Super Slow Motion Video with Huawei Mate 20 and Later Phones?
Models That Support Super Slow-Mo: Huawei Mate 20/20 Pro/20 X and later Mate models.
Before we demonstrate how to capture a super slow-mo with a Huawei Mate 20 and later models, we’ll explain this popular capture mode.
To begin, you should be aware that a camera/camera sensor collects a specific number of frames per second. The movie becomes legible by combining these pictures; the more images there are, the more fluent the video will be. The naked eye is thought to decipher about 60 pictures every second.
The benefit of improved camera sensors is that you can capture a maximum number of photos per second (some smartphones can record up to 960 / second) and slow down the sampling rate to produce a super slow-motion effect on the Huawei Mate 20 or later models.
Now, follow the stepwise guide to record super slow-mo with Huawei Mate 40 or later models:
Step 1: Launch your phone’s Camera go to More to select the Slow-Mo option.
Step 2: By default, you will see 4x on the slow-mo capture mode, which means the video will be recorded at 120FPS. Huawei Mate 40 allows you to capture up to 128X, i.e, 3840FPS for fast moving objects. To enable the Super Slo-Mo feature, select the 32X or 128X in this mode.
Step 3: Click on the Circle in the center to start and stop the recording. The video will be saved in your Gallery.
Part 5: How to Shoot Slo-Mo Videos on iPhone?
Slow-motion film on your iPhone essentially means slowing the fps so that everything appears to move slower inside the video. It is a popular effect employed by artists to produce one-of-a-kind video clips of sports footage, natural scenes, or sequences with a lot of dramatic motion.
Slow-motion films are supported by all iPhones, beginning with the 5S model, and the capability gets more robust and more stable with each successive generation. Shooting slow-motion films with your iPhone are addicting and enjoyable, and it adds drama to various settings.
Here is a step-by-step method for filming slow-mo with an iPhone, regardless of model.
Step 1: Launch the Camera app on your iPhone and go to the Slow-Mo effect by sliding from the options above. Change the frame rate on the upper right corner to 120, 240, 720, depending on the iPhone models you’re using.
Step 2: Now, start the recording by clicking the Red Circle in the center or either of the Volume button.
Step 3: After you’re done recording, press the Red Circle again and head towards the Gallery to view the recorded video.
For more details, check: How to make slo-mo video on your iPhone.
Part 6: Tips for Recording Super Slow Motion Video
Although super slow-motion videos are easy to record, they can be challenging for a content creator. But don’t worry, with the following tips, we have got you covered:
Utilize A Tripod
It’s critical to keep your phone as steady as possible when filming in Super Slow-mo since shaking might conflict with your video and hinder it from recognizing motions when set to auto-record. To get the most out of Super Slow-mo, we recommend using a tripod whenever feasible.
You can check these tripods for iPhone
Transition Between Single and Multi-Takes
To boost your chances of catching the ideal timing in Super Slow-mo, your phone allows you to record in Multi-Take mode, which can capture many bursts of Super Slow-mo in one video.
When combined with an auto record, additional Super Slow-mo videos will be captured as much as the focus box senses activity and will end only when you end filming. The manual record works similarly. However, you’ll have to physically hit the trigger each time you wish to record a picture in Super Slow-mo.
As the name indicates, Single-Take will record a single Super Slow-mo clip and then cease recording a moment or two later. Because Multi-Take clips are often more extensive, this could save a large storage capacity.
Readjust the Focus
The focus or auto-recording is tiny by default. Fortunately, you can enlarge it to improve its odds of recognizing movement. To adjust the size of the box, hold it until only its edges are visible, then move any corner from the others to expand the box’s area. Simply tap anywhere outside the borders to verify the adjustment when you’re happy with the size.
Capture in Natural Light
Because of the large number of frames it collects, Super Slow-mo works the best in natural daylight situations. Though not visible to the human eye, indoor lighting, especially LED bulbs and tiny fluorescents, seems to flash at very high rates. Even if the environment is well-lit, Super Slow-mo detects this and shows your subject in a substantially darker tone.
View the Video at Normal Speed
If you wish to watch your Super Slow-mo movies at regular speed, deactivate Super Slow-mo playing by tapping on the option directly below the video. This will give you a greater understanding of your phone’s incredible capacity to bring the world to a halt.
Learn more about : How to Convert normal video to slo-mo video?
Besides the tips mentioned above, you can also watch this video to get some tips and tricks in recording slo-mo video with iPhone.
Conclusion
Super Slow Motion videos are excellent for showcasing the action and conveying tales, and they are also entertaining and straightforward to create. Your only constraints are time and imagination. However, your Android or iPhone’s camera has many more tricks in its sleeve: Live images, time-lapse, Panoramas, and Portrait mode let you express yourself freely!
How to Brighten Video in Premiere Pro
Create High-Quality Video - Wondershare Filmora
An easy and powerful YouTube video editor
Numerous video and audio effects to choose from
Detailed tutorials provided by the official channel
Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.
There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.
There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.
In this article
01 Can I Brighten A Dark Video?
02 How to Brighten Video in Adobe Premiere Pro?
03 How To Lighten Up A Dark Video In Adobe Premiere Pro?
04 Enhancing Your Video In Premiere Pro
Can I Brighten A Dark Video?
This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.
There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.
How to Brighten Video in Adobe Premiere Pro?
Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.
Step 1
Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.
Step 2
Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.
Step 3
Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.
Step 4
You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.
Step 5
Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.
How To Lighten Up A Dark Video In Adobe Premiere Pro?
The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:
Step 1
If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.
Step 2
Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.
Step 3
Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.
Step 4
Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.
Step 5
Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.
Step 6
Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.
Step 7
The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.
Enhancing Your Video In Premiere Pro
Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:
Step 1
In the effects panel, search for “unsharp Mask” and drag it to the video clip.
Step 2
In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.
Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.
Conclusion
● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.
● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.
Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.
There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.
There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.
In this article
01 Can I Brighten A Dark Video?
02 How to Brighten Video in Adobe Premiere Pro?
03 How To Lighten Up A Dark Video In Adobe Premiere Pro?
04 Enhancing Your Video In Premiere Pro
Can I Brighten A Dark Video?
This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.
There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.
How to Brighten Video in Adobe Premiere Pro?
Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.
Step 1
Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.
Step 2
Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.
Step 3
Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.
Step 4
You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.
Step 5
Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.
How To Lighten Up A Dark Video In Adobe Premiere Pro?
The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:
Step 1
If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.
Step 2
Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.
Step 3
Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.
Step 4
Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.
Step 5
Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.
Step 6
Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.
Step 7
The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.
Enhancing Your Video In Premiere Pro
Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:
Step 1
In the effects panel, search for “unsharp Mask” and drag it to the video clip.
Step 2
In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.
Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.
Conclusion
● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.
● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.
Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.
There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.
There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.
In this article
01 Can I Brighten A Dark Video?
02 How to Brighten Video in Adobe Premiere Pro?
03 How To Lighten Up A Dark Video In Adobe Premiere Pro?
04 Enhancing Your Video In Premiere Pro
Can I Brighten A Dark Video?
This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.
There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.
How to Brighten Video in Adobe Premiere Pro?
Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.
Step 1
Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.
Step 2
Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.
Step 3
Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.
Step 4
You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.
Step 5
Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.
How To Lighten Up A Dark Video In Adobe Premiere Pro?
The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:
Step 1
If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.
Step 2
Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.
Step 3
Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.
Step 4
Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.
Step 5
Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.
Step 6
Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.
Step 7
The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.
Enhancing Your Video In Premiere Pro
Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:
Step 1
In the effects panel, search for “unsharp Mask” and drag it to the video clip.
Step 2
In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.
Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.
Conclusion
● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.
● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.
Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.
There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.
There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.
In this article
01 Can I Brighten A Dark Video?
02 How to Brighten Video in Adobe Premiere Pro?
03 How To Lighten Up A Dark Video In Adobe Premiere Pro?
04 Enhancing Your Video In Premiere Pro
Can I Brighten A Dark Video?
This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.
There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.
How to Brighten Video in Adobe Premiere Pro?
Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.
Step 1
Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.
Step 2
Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.
Step 3
Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.
Step 4
You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.
Step 5
Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.
How To Lighten Up A Dark Video In Adobe Premiere Pro?
The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:
Step 1
If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.
Step 2
Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.
Step 3
Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.
Step 4
Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.
Step 5
Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.
Step 6
Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.
Step 7
The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.
Enhancing Your Video In Premiere Pro
Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:
Step 1
In the effects panel, search for “unsharp Mask” and drag it to the video clip.
Step 2
In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.
Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.
Conclusion
● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.
● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.
6 Tips for Your First Facebook Ads
Facebook ads can be an effective channel for reaching the right customers, but only if you have a strong strategy in place. If you are new to Facebook ads, don’t rush into creating your first campaign without fully understanding the risks and rewards of advertising on Facebook.
Before you launch your first Facebook ad campaign, here are six tips to keep in mind:
Part1. Define the purpose of your ad
This can be a long-form or short-form question. If a user is browsing Facebook and sees your ad, you want them to know why they should click on it. Is it an offer? If so, what are they getting in return? Is the ad simply a call to action? You may want to include a “Learn more” button that links back to your website so that users can learn more about whatever they need to know before taking the next steps.
There are 11 Facebook Ads campaign objectives to choose from, and you should choose the one that best aligns with your goals.
Awareness:
- Brand awareness - Show your advertisements to individuals who are most likely to recall them.
- Reach - Show your ad to as many people as possible
Consideration:
- Traffic - Send people to your website or app
- Engagement - Increase the number of times people see and interact with your ad.
- App installs - Advertise to individuals who are more likely than others to download and use your app.
- Video views - Increase the number of times people see and interact with your video
- Lead generation - Use forms, calls, or chats to obtain information from people eager in your business.
- Messages - Get more people to message you on Facebook Messenger
Conversion:
- Conversions - Advertise to people who have a higher likelihood of taking action, such as buying something or calling you from your website.
- Catalog sales -Show your potential customers ads for items in your catalog that match their interests, so they are more likely to buy from you.
- Store traffic - This allows you to use your Facebook page as a marketing platform. If you want to run store traffic ads on Facebook, include your shop information there.
Whatever the case, make sure you have a clear goal from start to finish to understand what exactly it is you are trying to accomplish for any given campaign.
Part2. Know your target audience
Before you create any ads, it’s important to define who will see them. You’ll want to think carefully about the type of person who would be interested in what you’re offering and how they would respond when they see the ad. If you can’t answer these questions, it’s time to start considering different audiences.
But how do we begin defining a target audience? To start, let’s look at the different terms used by advertisers:
Customer: The person who has already bought from your company. For example, if you sell coffee makers on Amazon and have an existing customer base from those sales (customers), then this would be the most relevant term for you when deciding who should see specific ads for new products or services that may interest them based on past purchases or interests shown through other online activity such as browsing history or social media engagement with similar content/products/services.
Prospect: A lead that has expressed interest in buying something, but has not yet purchased anything from your company. A prospect does not necessarily mean someone has signed up for an email list or asked for more info; keeping leads fresh is just as important as nurturing prospects into customers later down the road so don’t forget that part!
Now that you know who you are targeting, it’s time to create an avatar for your target customer. An avatar is a fictional character that represents your target customer. This will help you to better understand their needs and wants, and it will also make it easier to create targeted ads.
There are a few different ways to create an avatar:
1.) Customer profile: This is a simple way to gather information about your target customer. Start by creating a list of demographic information such as age, location, gender, education level, and income level. You can also include interests and behaviors, such as what they like to do for fun, what type of music they listen to, and what type of products they buy.
2.) Persona: A persona is very similar to a customer profile, but it takes things a step further by giving each target customer a name and backstory. This can be helpful if you are targeting a specific niche audience.
3.) Mind-map: If you want to get creative, you can create a mind-map of your target customer. This will allow you to brainstorm everything that you know about them and come up with new ideas.
Once you have created your avatar, make sure that you keep it in mind when creating your Facebook ad campaign. This will help to ensure that your ads are relevant and interesting to your target customer.
Part3. Prepare a decent image for your audience to click on
Images are the most important part of any ad. A good image will help your customers understand what it is that they’re clicking on, and they may even want to share it with their friends. However, if your image is poor quality or irrelevant then, it won’t do as well as it could have done.
You should start by picking a relevant image that shows off your product in the best light possible. If possible, try and get some type of testimonial from customers using your product so that other people can see how great your product really is!
If you don’t have good images available yet, don’t worry! You can always hire a professional photographer who knows what kind of shots work best for advertising purposes but even if this isn’t something that suits every business, there are still plenty of free resources out there too like Unsplash which offers high-quality stock photography under Creative Commons licenses under various conditions such as attribution when used commercially, so make sure whatever method you choose fits within these guidelines!
Part4. Practice Your copywriting skills
You can have the best-developed ad in the world, but if it doesn’t have strong copywriting, your ads won’t work as well. It’s important to know what you’re getting into before spending time and money on Facebook ads.
The following are just some of the ways you can improve your copywriting skills:
- Read other people’s ads and see how they write their copy
- Read books about writing persuasive copy.
Try writing your own copy. Then have someone read it and give feedback on what they like and what they don’t like about it. Try to learn from their suggestions.
There are also many different ways to write copy for a Facebook ad. Some people like to use specific formulas for their ads, such as: AIDA (attention, interest, desire, action). This formula was developed by an American businessman named Claude C. Hopkins in 1898 and is still widely used today. If you’re not sure which method is best for you, it might be worth trying a few different ones. Have someone read your ad and give their opinion on which method was the most effective at convincing them that they should click on your ad.
You can also hire a copywriter to help you with your ad. However, if you don’t have the budget for it at this point in time or just want to try writing your own first before hiring someone else, there are many different apps and websites that will help you to create an ad copy.
Part5. Decide what type of ad format will you use
It is a carousel ad, or single image/video ad, or a combination of both?
If you are going to use a carousel ad, you need at least three images. If you’re using a single image or video ads, then you only need one image or video.
As always, if your budget allows it, try to increase the number of ad sets that are running at once so as not to cannibalize each other’s reach—it’s better to have multiple ads winning than just one.
If you’re running a single video ad for example and your budget is $100 per day, it’s best practice to have to create multiple versions of this single video ad so that they don’t cannibalize each other.
Part6. Plan your ad budget
You need to determine how much you’re willing to spend on your Facebook ads. This will help you to create a budget and also to decide how often you want your ad to be shown.
The average Facebook ad spends between $5 and $10 per day. However, this can vary depending on the type of product or service that you’re promoting, as well as the size of your target audience.
If you have a large target audience, it might be worth increasing your ad budget so that your ad is seen by more people. On the other hand, if you have a smaller target audience, you might want to decrease your ad budget so that you don’t spend too much money on ads that aren’t being seen by as many people.
It’s also important to consider how often you want your ad to be shown. If you want your ad to be seen by as many people as possible, it’s best to have it shown more than once. However, if you only want your ad to be shown to a select group of people, it’s best to have it shown less often.
Both of these factors will help you to determine your Facebook ad spend.
The Bottom Line
If you’re ready to get started with Facebook ads, we encourage you to put these tips into practice. I believe that they will help you make the most of your budget and achieve your goals, whether they be brand awareness, lead generation or sales.
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
Free Download For macOS 10.14 or later
How to Make Text Reveal Effect Easily
Have you ever seen the text reveal led by a subject when moving across the frame? It’s one of the most common text-revealing effects in video editing. This technique is often used to add titles or credits to a scene for cinematic vibes and creative effects.
While it may look complicated, it’s actually quite easy to create with a video editing program like Filmora. Filmora’s masking feature allows users to create impressive and eye-catching text reveals in their videos. For those looking for a tutorial on how to make text reveal, here’s a step-by-step guide to help you out.
How to add text reveal effect using Filmora’s masking tool
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
First, make sure the video clips you are using are clear, with the subject moving across the frame. It will help the text to stand out and be more easily seen. Now, follow the step-by-step guides below:
Step 1 Add video tracks
You will need three video tracks in order to create this effect, so click the (+) icon above the timeline > Add Video Track and add two more video tracks.
Step 2 Import the clip to the timeline
Drag and drop your clip onto the first and third video tracks of the timeline. Then, align them with each other.
Step 3 Make a cut at the beginning of the text
Find the spot where you want the text reveals to start, then click the scissor icon to make a cut on the clip from the first video track.
Step 4 Add and adjust the text
Go to Title > Plain Text > select which text styles suit you best. Then, drag the title to the second video track.
Double-click on the title clip and type out your text. Then, adjust the text position and align it to the cut you have made.
Step 5 Use the masking tool
Go to Effects > Utility > Image Mask, then drag and drop it onto the latter half of the top video clip.
Make more cuts on the top latter clip, frame by frame, starting from the first cut you have made.
Double-click on each of the smaller clips and find the mask settings.
Since the subject in this tutorial is moving from side to side, we are going to match the mask’s y-axis setting, which is also the revealed text portion, with the subject’s movement. Starting from the first clip, adjust the y-axis number to a smaller/bigger number.
There we go! The final look should look like this:
Summary
That is how we can create the text reveal effect using Wondershare Filmora. Using Filmora’s masking tool, it’s easy to create a text reveal the effect that can add flair and interest to your videos. Just follow the simple steps, and you’ll be able to get the desired result with a few clicks of your mouse. Give it a try, and share your thoughts with us.
Free Download For macOS 10.14 or later
First, make sure the video clips you are using are clear, with the subject moving across the frame. It will help the text to stand out and be more easily seen. Now, follow the step-by-step guides below:
Step 1 Add video tracks
You will need three video tracks in order to create this effect, so click the (+) icon above the timeline > Add Video Track and add two more video tracks.
Step 2 Import the clip to the timeline
Drag and drop your clip onto the first and third video tracks of the timeline. Then, align them with each other.
Step 3 Make a cut at the beginning of the text
Find the spot where you want the text reveals to start, then click the scissor icon to make a cut on the clip from the first video track.
Step 4 Add and adjust the text
Go to Title > Plain Text > select which text styles suit you best. Then, drag the title to the second video track.
Double-click on the title clip and type out your text. Then, adjust the text position and align it to the cut you have made.
Step 5 Use the masking tool
Go to Effects > Utility > Image Mask, then drag and drop it onto the latter half of the top video clip.
Make more cuts on the top latter clip, frame by frame, starting from the first cut you have made.
Double-click on each of the smaller clips and find the mask settings.
Since the subject in this tutorial is moving from side to side, we are going to match the mask’s y-axis setting, which is also the revealed text portion, with the subject’s movement. Starting from the first clip, adjust the y-axis number to a smaller/bigger number.
There we go! The final look should look like this:
Summary
That is how we can create the text reveal effect using Wondershare Filmora. Using Filmora’s masking tool, it’s easy to create a text reveal the effect that can add flair and interest to your videos. Just follow the simple steps, and you’ll be able to get the desired result with a few clicks of your mouse. Give it a try, and share your thoughts with us.
Free Download For macOS 10.14 or later
First, make sure the video clips you are using are clear, with the subject moving across the frame. It will help the text to stand out and be more easily seen. Now, follow the step-by-step guides below:
Step 1 Add video tracks
You will need three video tracks in order to create this effect, so click the (+) icon above the timeline > Add Video Track and add two more video tracks.
Step 2 Import the clip to the timeline
Drag and drop your clip onto the first and third video tracks of the timeline. Then, align them with each other.
Step 3 Make a cut at the beginning of the text
Find the spot where you want the text reveals to start, then click the scissor icon to make a cut on the clip from the first video track.
Step 4 Add and adjust the text
Go to Title > Plain Text > select which text styles suit you best. Then, drag the title to the second video track.
Double-click on the title clip and type out your text. Then, adjust the text position and align it to the cut you have made.
Step 5 Use the masking tool
Go to Effects > Utility > Image Mask, then drag and drop it onto the latter half of the top video clip.
Make more cuts on the top latter clip, frame by frame, starting from the first cut you have made.
Double-click on each of the smaller clips and find the mask settings.
Since the subject in this tutorial is moving from side to side, we are going to match the mask’s y-axis setting, which is also the revealed text portion, with the subject’s movement. Starting from the first clip, adjust the y-axis number to a smaller/bigger number.
There we go! The final look should look like this:
Summary
That is how we can create the text reveal effect using Wondershare Filmora. Using Filmora’s masking tool, it’s easy to create a text reveal the effect that can add flair and interest to your videos. Just follow the simple steps, and you’ll be able to get the desired result with a few clicks of your mouse. Give it a try, and share your thoughts with us.
Free Download For macOS 10.14 or later
First, make sure the video clips you are using are clear, with the subject moving across the frame. It will help the text to stand out and be more easily seen. Now, follow the step-by-step guides below:
Step 1 Add video tracks
You will need three video tracks in order to create this effect, so click the (+) icon above the timeline > Add Video Track and add two more video tracks.
Step 2 Import the clip to the timeline
Drag and drop your clip onto the first and third video tracks of the timeline. Then, align them with each other.
Step 3 Make a cut at the beginning of the text
Find the spot where you want the text reveals to start, then click the scissor icon to make a cut on the clip from the first video track.
Step 4 Add and adjust the text
Go to Title > Plain Text > select which text styles suit you best. Then, drag the title to the second video track.
Double-click on the title clip and type out your text. Then, adjust the text position and align it to the cut you have made.
Step 5 Use the masking tool
Go to Effects > Utility > Image Mask, then drag and drop it onto the latter half of the top video clip.
Make more cuts on the top latter clip, frame by frame, starting from the first cut you have made.
Double-click on each of the smaller clips and find the mask settings.
Since the subject in this tutorial is moving from side to side, we are going to match the mask’s y-axis setting, which is also the revealed text portion, with the subject’s movement. Starting from the first clip, adjust the y-axis number to a smaller/bigger number.
There we go! The final look should look like this:
Summary
That is how we can create the text reveal effect using Wondershare Filmora. Using Filmora’s masking tool, it’s easy to create a text reveal the effect that can add flair and interest to your videos. Just follow the simple steps, and you’ll be able to get the desired result with a few clicks of your mouse. Give it a try, and share your thoughts with us.
Also read:
- New Best Online GIF to Image (PNG/JPG) Converter for 2024
- In 2024, Discover How You Can Use Vectorscope to Adjust Luminance, Color Grading, and More in Your Video Editing Projects
- Updated 8 Free Title Makers to Use for 2024
- New In 2024, Do You Seek to Blur Out Your Video and Photo to Display some Motion Blur? This Article Provides a List of the Best Motion Blur Apps for Videos and Photos
- Troubleshoot Snapchat Camera Zoomed in Issue 4 Tips for 2024
- Updated Ultimate Guide on How To Plan and Storyboard a Music Video
- Updated Recording Slow-Motion Videos Is Not More Difficult Using a Smartphone. Learn Everything From How to Record Slow-Motion Video and Edit a Video to Slow Down It for 2024
- Updated 2024 Approved How Windows Movie Maker Save MP4 File
- New 2024 Approved What Are The Stages Of Film Production - 2023
- The Best Cinematic LUTs in The Market for 2024
- New | Best WMV to GIF Converters
- How to Make a GIF With Transparent Background for 2024
- New Zoom In and Zoom Out on YouTube
- New 2024 Approved Find Out How to Create Your Own Custom Motion Graphics in Filmora. Add Unique Objects, Manipulate Text, and Animate Anything You Want
- New In 2024, How to Create Text Animation for Videos
- Event Videography Is Popular in Weddings, Graduation, Family Reunion and Other Great Moments. Here Im Going to Share some of the Tips to Make a Better Event Videography for 2024
- 2024 Approved Tutorial to Add Effects with Movavi Slideshow Maker
- New How to Create a Clideo Slideshow
- Why Your WhatsApp Live Location is Not Updating and How to Fix on your Apple iPhone 13 Pro Max | Dr.fone
- Fixing Foneazy MockGo Not Working On Apple iPhone X | Dr.fone
- Is Your Apple iPhone 12 mini in Security Lockout? Proper Ways To Unlock
- How To Fix Unresponsive Phone Touchscreen Of Oppo A18 | Dr.fone
- In 2024, How to use Pokemon Go Joystick on Oppo Reno 11F 5G? | Dr.fone
- In 2024, How to Mirror Apple iPhone 15 to Mac? | Dr.fone
- Fix Unfortunately Settings Has Stopped on Realme 12+ 5G Quickly | Dr.fone
- Fixing Foneazy MockGo Not Working On Samsung Galaxy A25 5G | Dr.fone
- How to Reset a Xiaomi Phone that is Locked?
- Delete Gmail Account With/Without Password On Tecno Spark 10 Pro
- How To Use Allshare Cast To Turn On Screen Mirroring On OnePlus Ace 3 | Dr.fone
- Latest Guide How To Bypass Samsung Galaxy F14 5G FRP Without Computer
- In 2024, Is GSM Flasher ADB Legit? Full Review To Bypass Your Vivo Y27 4G Phone FRP Lock
- Ultimate Guide on Samsung Galaxy M34 5G FRP Bypass
- Trouble with Apple iPhone 12 mini Swipe-Up? Try These 11 Solutions | Dr.fone
- In 2024, Top 15 Apps To Hack WiFi Password On Honor Magic 6 Pro
- Title: New How to Record Super Slow Motion Videos on Your Phone?
- Author: Morgan
- Created at : 2024-05-19 05:12:03
- Updated at : 2024-05-20 05:12:03
- Link: https://ai-video-editing.techidaily.com/new-how-to-record-super-slow-motion-videos-on-your-phone/
- License: This work is licensed under CC BY-NC-SA 4.0.
