Do You Wish to Create High-Quality Videos and Experience Effective Videos with Editing? No Problem at All because the Keyboard Shortcuts Listed Here Will Assist You

To get rid of mistakes in the videos and to make them more visually appealing, people prefer to edit videos. You can also shape the video in a storytelling way to express and present the cohesive story to the world. Nowadays, video editing is a demanded skill, and every person wishes to master it. In these scenarios, the built-in keyboard shortcuts will help you a lot.

The best tool that provides built-in keyboard shortcuts and can help you experience the best video editing experience is Wondershare Filmora. By the end of this article, you will be aware of the checkpoints along with the keyboard shortcuts of Filmora. We will also provide keyboard shortcuts in this article to encourage shortcut video editing.

Wondershare Filmora12 A cross-platform helping you make quick and efficient video editing!

Free Download Free Download Learn More

Part 1: Major Checkpoints in Quick Video Editing

While doing video editing, it is very important to focus on efficiency and speed. It is essential to focus on the speed and efficiency of a video editing tool. Moreover, there are some checkpoints that you have to consider before getting into video editing. Some of them are:

01of 05Preparing Footage

Before anything else, you have to arrange and prepare your footage. It helps optimize the editing procedure, and you can label the files properly. Besides this, it also saves you time searching for specific files and footage.

02of 05Timeline Setting

You have to set up your timelines in the desired and recognizable resolutions. Moreover, adjusting frame rates and duration of videos and creating customized templates before anything else.

03of 05Selection of moments

Make sure you watch your video in a proper manner so you don’t have to waste time finding a specific moment. By this, you will be able to select a moment without wasting additional time.

04of 05Transitions and Adjustments

While editing the videos, you need to add the basic transitions to add consistency. Furthermore, you can adjust the audio metrics of videos and sync them with the length of videos.

05of 05Preview and Export

After editing the videos, you also have to preview them to check and fix the mistakes. Above all, always select the tool through which you can preview the videos and export them in the desired output format.

Part 2: An Introduction to Wondershare Filmora and Its Video Editing Intuition

Wondershare Filmora can be referred to as a feature-packed, cost-effective, all-in-one, easy-to-use video editing software. This tool has the capability to create professional-grade videos. You can also take assistance from this tool for creating advanced-level content for your social media platforms. It is also known to be the best choice when it comes to editing videos.

In Filmora, you can find diversified video editing tools as it comprehends timeline-based editing, so you can also use it to edit your memories. Several video formats are compatible with Filmora, so you will not face restrictions in this part.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Key Features of Wondershare Filmora

• The AI Smart Cutout feature of Filmora lets you highlight and edit diversified unrequired objects, persons, or pets from the background.
• One of the best things about Filmora is it supports the AI Image feature through which you can turn descriptive text into illustrative images.
• It also shows the integrations with ChatGPT, through which you can generate AI text during video editing. This is perfect for YouTube descriptions and titles.
• You can also adjust the speed of the video while controlling the keyframes to make cinematic-grade edits in simple videos.
• The title editing feature lets you create artistic features with modernized word art, illustrations, and animations.

Part 3: Learning All Keyboard Shorts for Quick and Efficient Video Editing

To maximize productivity and workflow efficiency, you can take assistance from the keyboard shortcuts. Luckily, the industry-standard tool named Filmora offers effective keyboard shortcuts. Do you wish to know the keyboard shortcuts integrated with Wondershare Filmora? There is nothing to worry about because in this part, you will find the effective and implementable easy edit video shortcuts:

Function	Shortcut
Preference	Ctrl+Shift+,
Keyboard Shortcut	Ctrl+Alt+K
Exit	Alt+F
New Project	Ctrl+N
Open Project	Ctrl+O
Save Project	Ctrl+S
Save Project As	Ctrl+Shift+S
Archive Project	Ctrl+Shift+A
Import Media Files	Ctrl+I
Record Voice-Over	Alt+R
Add a New Folder	+Alt+N
Undo	Ctrl+Z
Redo	Ctrl+Y
Cut	Ctrl+X
Copy	Ctrl+C
Paste	Ctrl+V
Duplicate	Ctrl+D
Delete	Del
Ripple Delete	Shift+Del
Close Gap	Alt+Del
Select All	+A
Copy Effects	Ctrl+Alt+C
Paste Effects	Ctrl+Alt+V
Select Clip Range	X
Cancel the Selected Range	Shift+X
Nudge Left	Alt+Left
Nudge Right	Alt+Right
Nudge Up	Alt+Up
Edit Properties	Alt+E
Split	Ctrl+B
Trim Start to Playhead	Alt+[
Trim End to Playhead	Alt+]
Crop to Fit	Ctrl+F
Crop and Zoom	Alt+C
Rotate 90CW	Ctrl+Alt+Right
Rotate CCW	Ctrl+Alt+Left
Group	Ctrl+G
UnGroup	Ctrl+Alt+G
Uniform Speed	Ctrl+R
Add Freeze Frame	Alt+F
Detach Audio	Ctrl+Alt+D
Mute	Ctrl+Shift+M
Stabilization	Alt+S
Chroma Key	Ctrl+Shift+G
Red Marker	Alt+1
Orange Marker	Alt+2
Yellow Marker	Alt+3
Green Marker	Alt+4
Cyan Marker	Alt+5
Blue Marker	Alt+6
Purple Marker	Alt+7
Grey Marker	Alt+8
Select All Clips With the Same Color Mark	Alt+Shift+
Render Preview	Enter
Add Audio/Video Keyframes	Alt+Left Click
Previous Keyframes	[
Next Keyframes	]
Motion Tracking	Alt+X
Color Match	Alt+M
Insert	Shift+QI
Overwrite	Shift_+O
Replace	Alt+Mouse Drag
Rename	F2
Reveal in Explorer	Ctrl+Shift+R
Apply	Alt+A
Quick Split Mode	C
Select	V
Open Audio Stretch	S
Exit Audio Stretch	Shift+S
Add to Favorites	Shift+F
Adjust the Bezier Curve	Alt+Mouse Drag
Split 9 Edited State0	Shift+Enter
Merge Up (Cursor at the beginning of the sentence0	Backspace
Merge down subtitles 9radio or edited state)	Alt+Q
Merge selected subtitles (multi-select state	Alt+Q
Play/Pause	Space
Stop	Ctrl +/
Full Screen/Restore Snapshot	Ctrl+Alt+S
Previous Frame /Move Left	Left
Next Frame/ More Right	Right
Previous Edit Point / Move Up	Up
Next Edit Point/ Move Down	Down
Go To Next Second	Shift+Right
Go to Previous Marker	Shift+Up
Go to Next Marker	Shift+Down
Go to Project Beginning	Home
Go to Project End	End
Go to Selected Clip Start	Shift+Home
Go to Selected Clip End	Shift+End
Zoom In	Ctrl+=
Zoom Out	Ctrl+_
Zoom to Fit Timeline	Shift+Z
Select Previous	Ctrl+Left
Select Next	Ctrl+Right
Horizontal Scroll (Timeline)	Alt+Scroll Up/Down
Vertical Scroll (Timeline)	Scroll Up/Down
Mark In	I
Mark Out	O
Clear In And Out	Ctrl+Shift+X
Add Marker	M
Edit Marker	Shift+M
Help	F
Export	Ctrl+ E

Conclusion

In the article, you have discovered crucial information about video editing in Filmora. There are some checkpoints that you need to keep in mind before getting into editing. Integrating these checkpoints, there is a consistent need to understand keyboard shortcuts in video editing. This procedure, in particular, helps much in effective video editing.

With the help of the Filmora shortcut video editor, you can make cinematic-level edits to the video. It also integrates several features such as AI Smart Cutout, AI Copywriting, and more. To know more about these useful keyboard shortcuts, this article has surely been of great help.

Free Download Free Download Learn More

Part 1: Major Checkpoints in Quick Video Editing

While doing video editing, it is very important to focus on efficiency and speed. It is essential to focus on the speed and efficiency of a video editing tool. Moreover, there are some checkpoints that you have to consider before getting into video editing. Some of them are:

01of 05Preparing Footage

Before anything else, you have to arrange and prepare your footage. It helps optimize the editing procedure, and you can label the files properly. Besides this, it also saves you time searching for specific files and footage.

02of 05Timeline Setting

You have to set up your timelines in the desired and recognizable resolutions. Moreover, adjusting frame rates and duration of videos and creating customized templates before anything else.

03of 05Selection of moments

Make sure you watch your video in a proper manner so you don’t have to waste time finding a specific moment. By this, you will be able to select a moment without wasting additional time.

04of 05Transitions and Adjustments

While editing the videos, you need to add the basic transitions to add consistency. Furthermore, you can adjust the audio metrics of videos and sync them with the length of videos.

05of 05Preview and Export

After editing the videos, you also have to preview them to check and fix the mistakes. Above all, always select the tool through which you can preview the videos and export them in the desired output format.

Part 2: An Introduction to Wondershare Filmora and Its Video Editing Intuition

Wondershare Filmora can be referred to as a feature-packed, cost-effective, all-in-one, easy-to-use video editing software. This tool has the capability to create professional-grade videos. You can also take assistance from this tool for creating advanced-level content for your social media platforms. It is also known to be the best choice when it comes to editing videos.

In Filmora, you can find diversified video editing tools as it comprehends timeline-based editing, so you can also use it to edit your memories. Several video formats are compatible with Filmora, so you will not face restrictions in this part.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Key Features of Wondershare Filmora

• The AI Smart Cutout feature of Filmora lets you highlight and edit diversified unrequired objects, persons, or pets from the background.
• One of the best things about Filmora is it supports the AI Image feature through which you can turn descriptive text into illustrative images.
• It also shows the integrations with ChatGPT, through which you can generate AI text during video editing. This is perfect for YouTube descriptions and titles.
• You can also adjust the speed of the video while controlling the keyframes to make cinematic-grade edits in simple videos.
• The title editing feature lets you create artistic features with modernized word art, illustrations, and animations.

Part 3: Learning All Keyboard Shorts for Quick and Efficient Video Editing

To maximize productivity and workflow efficiency, you can take assistance from the keyboard shortcuts. Luckily, the industry-standard tool named Filmora offers effective keyboard shortcuts. Do you wish to know the keyboard shortcuts integrated with Wondershare Filmora? There is nothing to worry about because in this part, you will find the effective and implementable easy edit video shortcuts:

Function	Shortcut
Preference	Ctrl+Shift+,
Keyboard Shortcut	Ctrl+Alt+K
Exit	Alt+F
New Project	Ctrl+N
Open Project	Ctrl+O
Save Project	Ctrl+S
Save Project As	Ctrl+Shift+S
Archive Project	Ctrl+Shift+A
Import Media Files	Ctrl+I
Record Voice-Over	Alt+R
Add a New Folder	+Alt+N
Undo	Ctrl+Z
Redo	Ctrl+Y
Cut	Ctrl+X
Copy	Ctrl+C
Paste	Ctrl+V
Duplicate	Ctrl+D
Delete	Del
Ripple Delete	Shift+Del
Close Gap	Alt+Del
Select All	+A
Copy Effects	Ctrl+Alt+C
Paste Effects	Ctrl+Alt+V
Select Clip Range	X
Cancel the Selected Range	Shift+X
Nudge Left	Alt+Left
Nudge Right	Alt+Right
Nudge Up	Alt+Up
Edit Properties	Alt+E
Split	Ctrl+B
Trim Start to Playhead	Alt+[
Trim End to Playhead	Alt+]
Crop to Fit	Ctrl+F
Crop and Zoom	Alt+C
Rotate 90CW	Ctrl+Alt+Right
Rotate CCW	Ctrl+Alt+Left
Group	Ctrl+G
UnGroup	Ctrl+Alt+G
Uniform Speed	Ctrl+R
Add Freeze Frame	Alt+F
Detach Audio	Ctrl+Alt+D
Mute	Ctrl+Shift+M
Stabilization	Alt+S
Chroma Key	Ctrl+Shift+G
Red Marker	Alt+1
Orange Marker	Alt+2
Yellow Marker	Alt+3
Green Marker	Alt+4
Cyan Marker	Alt+5
Blue Marker	Alt+6
Purple Marker	Alt+7
Grey Marker	Alt+8
Select All Clips With the Same Color Mark	Alt+Shift+
Render Preview	Enter
Add Audio/Video Keyframes	Alt+Left Click
Previous Keyframes	[
Next Keyframes	]
Motion Tracking	Alt+X
Color Match	Alt+M
Insert	Shift+QI
Overwrite	Shift_+O
Replace	Alt+Mouse Drag
Rename	F2
Reveal in Explorer	Ctrl+Shift+R
Apply	Alt+A
Quick Split Mode	C
Select	V
Open Audio Stretch	S
Exit Audio Stretch	Shift+S
Add to Favorites	Shift+F
Adjust the Bezier Curve	Alt+Mouse Drag
Split 9 Edited State0	Shift+Enter
Merge Up (Cursor at the beginning of the sentence0	Backspace
Merge down subtitles 9radio or edited state)	Alt+Q
Merge selected subtitles (multi-select state	Alt+Q
Play/Pause	Space
Stop	Ctrl +/
Full Screen/Restore Snapshot	Ctrl+Alt+S
Previous Frame /Move Left	Left
Next Frame/ More Right	Right
Previous Edit Point / Move Up	Up
Next Edit Point/ Move Down	Down
Go To Next Second	Shift+Right
Go to Previous Marker	Shift+Up
Go to Next Marker	Shift+Down
Go to Project Beginning	Home
Go to Project End	End
Go to Selected Clip Start	Shift+Home
Go to Selected Clip End	Shift+End
Zoom In	Ctrl+=
Zoom Out	Ctrl+_
Zoom to Fit Timeline	Shift+Z
Select Previous	Ctrl+Left
Select Next	Ctrl+Right
Horizontal Scroll (Timeline)	Alt+Scroll Up/Down
Vertical Scroll (Timeline)	Scroll Up/Down
Mark In	I
Mark Out	O
Clear In And Out	Ctrl+Shift+X
Add Marker	M
Edit Marker	Shift+M
Help	F
Export	Ctrl+ E

Conclusion

In the article, you have discovered crucial information about video editing in Filmora. There are some checkpoints that you need to keep in mind before getting into editing. Integrating these checkpoints, there is a consistent need to understand keyboard shortcuts in video editing. This procedure, in particular, helps much in effective video editing.

With the help of the Filmora shortcut video editor, you can make cinematic-level edits to the video. It also integrates several features such as AI Smart Cutout, AI Copywriting, and more. To know more about these useful keyboard shortcuts, this article has surely been of great help.

Unlocking the Power of DaVinci Resolve Scopes: Enhance Your Color Grad

How do you set up DaVinci scopes? The internal color scopes in Resolve are flexible and customizable but can be confusing. The built-in DaVinci Resolve scope used to be limited only a few possibilities. However, the new 9-scope view offers a wider range of choice, making them a powerful tool for video editing. In this article, we will explore how to set up DaVinci scopes to achieve better color results.

Color Correction Editor An easy-to-use video editor helps you make color correction and color grading experience for videos!

Free Download Use Vectorscope in Filmora Try Color Correction

Part 1. Unlocking Color Precision: Exploring the Improved Scopes in DaVinci Resolve

The Blackmagic Design continues to improve the Resolve to make it better with every iteration. The new features improve colorist workflow in less powerful ways. The major improvements include a major facelift to the scope, allowing professions to do more with DaVinci resolve. Let’s have a look at some of these changes:

1. CIE 1931 Color Space

The inclusion of the CIE chromaticity diagram is perhaps the biggest change to DaVinci scopes. It displays the gamut of the project as set in the Color Management preferences. This makes it a useful alternate way of looking at the trace of an image to judge when the values are out of legal range. It also functions as an educational tool for learning about the range of color spaces.

2. Low Pass Filter

The wavefront and parade scopes now have a low pass filter, which reduces noise in the trace. This visually sharpens the display of the scopes, allowing easier detection of elements in the frame.

The image above shows the major improvements. The second set of waveforms has more defined lines. These have the low-pass filter activated, which makes the scopes easier to read.

3. High, Mid, and Low Views in Vectorscope

The vectorscope has been added to the ability to toggle the mid-tones, shadows, and highlights of the image independently. You can set the ranges with greater visualization control.

As seen in the picture above, the vectorscope controls allow you to select the low, mid, or high range of the image. You can also set the low and high ranges as desired.

4. Histograms Over Curves

Another great DaVinci scope is the histogram, which now appears outside of the scope panel. The new improvements have embedded the histogram inside the Curves tab on the bottom Palette. Click on the three dots in the Custom Curves tab. The pulldown menu that appears includes the Input or Output of the histogram. With these settings, you can find the element in the frame that helps you make adjustments quickly.

5. Scope Quality

The GPU-accelerated scopes engine allows the scopes to respond quickly. Users have the option to set the quality to high, medium, or low and the scopes will respond to a range of hardware systems. Depending on whether you are working on a stationary short or looking to see how the scopes react in real-time, you will be able to toggle the modes quickly and easily.

6. YRGB View in Histogram and Parade

The histogram and parade now come with the ability to view luminance together with the red, green, and blue channels. Users also have the option for YCbCr mode in the Parade.

7. Extents

These are weak elements in the signore, which are of lesser importance compared to the stronger elements. However, Danvici now allows them to be revealed for a full illustration of the information that lies in the image. Consequently, extents can be used to determine whether the data is being clipped beyond legal limits.

Part 2. Mastering Scopes in DaVinci Resolve: A Brief Guide

DaVinci scopes help you to analyze images as a basis for color correction. When used properly, scopes help in fixing white balance issues and checking saturation. They also allow you to get the correct exposure and check details like skin tone. To use scopes in DaVinci Resolve, go to the color page in the bottom right corner. You can also click on the small graph icon to view the scope. Here is how to use them:

• Waveform
• Parade (RGB)
• Vectorscope
• Histogram

1. Waveform

The Waveform represents the brightness or luminance of your image. In this video scope, the brightest parts are at the top while the darkest are at the bottom. The pixels are represented from left to right.

The Waveform scope on DaVinci Resolve is helpful when you are checking for clipping. This simply means finding out whether the image is too bright or too dark. The waveform also ensures that the image is properly exposed. The colorize feature of the waveform shows the colors of the image while the extent shows the darkest or lightest parts of the image.

2. Parade (RGB)

The RGB Parade comprises 3 waveforms that represent the luminance of red, green, and blue channels. The approach for reading the parade video scope is similar to that of the waveform. However, you now look at the balance between the colors correct the white balance, and check for a color cast.

The Parade works almost in a similar manner as the waveform. It displays the red, green, and blue channels of the image as separate waveforms. This way, you can easily identify and correct color casts while ensuring the colors in the image are balanced. The video scope provides useful information to decide which parts of the image need to be corrected or tweaked further.

3. Vectorscope

Vectorscope in DaVinci Resolve shows hue and saturation on a circular graph. Hues (the colors) are indicated outside of the color wheel for easier color correction. Saturation is indicated by how far the graph extends from the center.

By displaying the hue and saturation of the image as a vector, this video scope helps check skin tones. The scope specifically checks whether skin tones are shifted toward colors such as yellow, magenta, or green. It allows you to make sure that the colors in your subject skin tones are not too saturated or desaturated.

4. Histogram

Histogram is a video scope in DaVinci Resolve that displays the brightness or luminance of an image from left to right for the RGB channel. The video scope is based on the number of pixels that the colors red, blue, and green have in an image.

Using the histogram video scope on DaVinci Resolve allows you to check for overexposure or underexposure in your image. You can also ensure that the image has a good overall brightness range. The scope provides a graphical representation of tonal distribution in each channel. This way, you can evaluate the tone in detail for more accurate brightness and contrast adjustments.

Part 3: Edit Like a Pro: Mastering Video Scopes in Filmora

When working on video projects, Wondershare Filmora is a great editing software. It comes with unique features to color-correct your videos on the go as you edit it. From AI-powered features to royalty-free music, there is so much more you can do with Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Use Video Scopes on Filmora

Using video scopes on Filmora is easy. The software offers four video scope options, allowing you to color-correct and grade your visual images properly. They include parade RGB, waveform, vectorscope, and histogram. When editing videos on Filmora, the video scopes can be accessed by clicking on the video scopes icon. The icon is found on the top right corner of the media player.

Filmora has made it easy for users to manage video scopes, and color-correct videos quickly. Users can change the layout options of the video scopes to match the editing needs of their project. You can also expand the button to show the name of the scope. As you manage the scopes, you can start with the Parade to make the necessary adjustments. Then move on to waveform, vectorscope, and histogram.

The uses of the video scope on Filmora are as follows:

• Parade – Cahnge the color channel from RBG to YRGB or YCbCr
• Vectorscope – Identify skin tone
• Waveform – Adjust color channels in a different way
• Histogram – Display the multiple color adjustments in a graphical way

Conclusion

Scopes are indeed valuable to video editors and colorists. While viewing images on a monitor can be subjective, scopes allow you to analyze and define them objectively. This gives you the power to color grade and correct to ensure that viewers look at the image with a clear representation. When working on or editing your videos, we recommend Wondershare Filmora. The video editing software comes with a wide range of features and video scopes that allow you to do everything on the same platform.

Free Download Use Vectorscope in Filmora Try Color Correction

Part 1. Unlocking Color Precision: Exploring the Improved Scopes in DaVinci Resolve

The Blackmagic Design continues to improve the Resolve to make it better with every iteration. The new features improve colorist workflow in less powerful ways. The major improvements include a major facelift to the scope, allowing professions to do more with DaVinci resolve. Let’s have a look at some of these changes:

1. CIE 1931 Color Space

The inclusion of the CIE chromaticity diagram is perhaps the biggest change to DaVinci scopes. It displays the gamut of the project as set in the Color Management preferences. This makes it a useful alternate way of looking at the trace of an image to judge when the values are out of legal range. It also functions as an educational tool for learning about the range of color spaces.

2. Low Pass Filter

The wavefront and parade scopes now have a low pass filter, which reduces noise in the trace. This visually sharpens the display of the scopes, allowing easier detection of elements in the frame.

The image above shows the major improvements. The second set of waveforms has more defined lines. These have the low-pass filter activated, which makes the scopes easier to read.

3. High, Mid, and Low Views in Vectorscope

The vectorscope has been added to the ability to toggle the mid-tones, shadows, and highlights of the image independently. You can set the ranges with greater visualization control.

As seen in the picture above, the vectorscope controls allow you to select the low, mid, or high range of the image. You can also set the low and high ranges as desired.

4. Histograms Over Curves

Another great DaVinci scope is the histogram, which now appears outside of the scope panel. The new improvements have embedded the histogram inside the Curves tab on the bottom Palette. Click on the three dots in the Custom Curves tab. The pulldown menu that appears includes the Input or Output of the histogram. With these settings, you can find the element in the frame that helps you make adjustments quickly.

5. Scope Quality

The GPU-accelerated scopes engine allows the scopes to respond quickly. Users have the option to set the quality to high, medium, or low and the scopes will respond to a range of hardware systems. Depending on whether you are working on a stationary short or looking to see how the scopes react in real-time, you will be able to toggle the modes quickly and easily.

6. YRGB View in Histogram and Parade

The histogram and parade now come with the ability to view luminance together with the red, green, and blue channels. Users also have the option for YCbCr mode in the Parade.

7. Extents

These are weak elements in the signore, which are of lesser importance compared to the stronger elements. However, Danvici now allows them to be revealed for a full illustration of the information that lies in the image. Consequently, extents can be used to determine whether the data is being clipped beyond legal limits.

Part 2. Mastering Scopes in DaVinci Resolve: A Brief Guide

DaVinci scopes help you to analyze images as a basis for color correction. When used properly, scopes help in fixing white balance issues and checking saturation. They also allow you to get the correct exposure and check details like skin tone. To use scopes in DaVinci Resolve, go to the color page in the bottom right corner. You can also click on the small graph icon to view the scope. Here is how to use them:

• Waveform
• Parade (RGB)
• Vectorscope
• Histogram

1. Waveform

The Waveform represents the brightness or luminance of your image. In this video scope, the brightest parts are at the top while the darkest are at the bottom. The pixels are represented from left to right.

The Waveform scope on DaVinci Resolve is helpful when you are checking for clipping. This simply means finding out whether the image is too bright or too dark. The waveform also ensures that the image is properly exposed. The colorize feature of the waveform shows the colors of the image while the extent shows the darkest or lightest parts of the image.

2. Parade (RGB)

The RGB Parade comprises 3 waveforms that represent the luminance of red, green, and blue channels. The approach for reading the parade video scope is similar to that of the waveform. However, you now look at the balance between the colors correct the white balance, and check for a color cast.

The Parade works almost in a similar manner as the waveform. It displays the red, green, and blue channels of the image as separate waveforms. This way, you can easily identify and correct color casts while ensuring the colors in the image are balanced. The video scope provides useful information to decide which parts of the image need to be corrected or tweaked further.

3. Vectorscope

Vectorscope in DaVinci Resolve shows hue and saturation on a circular graph. Hues (the colors) are indicated outside of the color wheel for easier color correction. Saturation is indicated by how far the graph extends from the center.

By displaying the hue and saturation of the image as a vector, this video scope helps check skin tones. The scope specifically checks whether skin tones are shifted toward colors such as yellow, magenta, or green. It allows you to make sure that the colors in your subject skin tones are not too saturated or desaturated.

4. Histogram

Histogram is a video scope in DaVinci Resolve that displays the brightness or luminance of an image from left to right for the RGB channel. The video scope is based on the number of pixels that the colors red, blue, and green have in an image.

Using the histogram video scope on DaVinci Resolve allows you to check for overexposure or underexposure in your image. You can also ensure that the image has a good overall brightness range. The scope provides a graphical representation of tonal distribution in each channel. This way, you can evaluate the tone in detail for more accurate brightness and contrast adjustments.

Part 3: Edit Like a Pro: Mastering Video Scopes in Filmora

When working on video projects, Wondershare Filmora is a great editing software. It comes with unique features to color-correct your videos on the go as you edit it. From AI-powered features to royalty-free music, there is so much more you can do with Filmora.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Use Video Scopes on Filmora

Using video scopes on Filmora is easy. The software offers four video scope options, allowing you to color-correct and grade your visual images properly. They include parade RGB, waveform, vectorscope, and histogram. When editing videos on Filmora, the video scopes can be accessed by clicking on the video scopes icon. The icon is found on the top right corner of the media player.

Filmora has made it easy for users to manage video scopes, and color-correct videos quickly. Users can change the layout options of the video scopes to match the editing needs of their project. You can also expand the button to show the name of the scope. As you manage the scopes, you can start with the Parade to make the necessary adjustments. Then move on to waveform, vectorscope, and histogram.

The uses of the video scope on Filmora are as follows:

• Parade – Cahnge the color channel from RBG to YRGB or YCbCr
• Vectorscope – Identify skin tone
• Waveform – Adjust color channels in a different way
• Histogram – Display the multiple color adjustments in a graphical way

Conclusion

Scopes are indeed valuable to video editors and colorists. While viewing images on a monitor can be subjective, scopes allow you to analyze and define them objectively. This gives you the power to color grade and correct to ensure that viewers look at the image with a clear representation. When working on or editing your videos, we recommend Wondershare Filmora. The video editing software comes with a wide range of features and video scopes that allow you to do everything on the same platform.

Premiere Pro Tutorial: How To Change Video Frame Rate

The video’s frame rate is an important aspect of it. Too high of a frame rate makes the video seem unnatural. On the other hand, too low can make some videos choppy. You can fix that by changing the frame rate using a video editor. And we are here to help you learn how to do that. Here’s how to change the frame rate in Premiere Pro.

The frame rate sometimes makes or breaks the video. So it is important to get this setting right. Suppose you made a mistake and recorded your video in the wrong setting. You can follow this guide to solve your problem.

How To Check Video Frame Rate in Premiere Pro

Before we teach you how to change a video’s frame rate in Premiere Pro, let’s first make sure you know how to check. Maybe you don’t need to modify the video because it is already in the correct setting.

So how do you do that in Premiere Pro?

1. Import the video to Adobe Premiere Pro.
2. Check the “Media” window. Next to the video file name is its frame rate. It is written in the format x.00 fps. FPS stands for “frames per second,” which is used interchangeably with the term frame rate.

Reasons for Changing Frame Rate

Suppose you have an action-packed video. It would not look great at 30 fps - it will look too choppy. That will give your audience a rotten viewing experience. By increasing the frames, you can make the motion more fluid and smoother.

Increasing the frames per second also results in better slow-motion videos. A 30 fps one would not look good with this effect because it does not show smooth motion. Thus, we recommend making the video at least 60 fps.

However, a higher frame rate does not always mean better videos. It can result in what they call the “soap opera effect.” It means the video shows too many details. That makes the videos seem “unnatural” or less cinematic.

High frame rates make videos look more realistic since there is less stuttering and motion blur between frames. That’s great. But for older audiences - the ones used to watching videos at 24 fps, it can be off-putting. So it’s also important to consider your target audience when deciding the right frame rate for your video.

With these reasons in mind, you may want to change your video’s frame rate.

How To Change FPS in Premiere Pro

Let’s dilly-dally no more. Here’s a quick guide on how to change fps in Adobe Premiere Pro. This program gives you two different ways to change fps. One is changing the frame rate of a sequence; the other is changing the frame rate of the video clip. We will teach you how to do both.

l Change the Frame Rate of a Sequence

Suppose you want to keep the frame rate of most of the video the same. Only some parts need adjusting. You can change the frame rate of the sequences that need changing instead. Here are the steps to follow to achieve this:

1. Open your project in Adobe Premiere Pro.
2. In the Project panel, select the sequence whose frame rate you want to change. Right-click on that sequence.
3. Choose “Sequence Settings” from the menu that appears.

1. Click the drop-down menu for “Timebase.”
2. Select the frame rate you want the sequence to be in.

1. Click “OK.”

l Change the Frame Rate of a Video Clip

Here are the steps you should follow if you want to change the frame rate of an entire video clip.

1. Import your video clip to Premiere Pro and drag it to the timeline.
2. Go to the “Effects” tab. It’s in the options at the bottom left of the screen.

1. Select “Video Effects” > “Time” > “Posterize Time.”

1. Drag and drop the Posterize Time effect to the clip whose frame rate you want to change.
2. Click “Effect Controls” at the top left of the screen.
3. Select the small “arrow” button next to the “Frame Rate” text under “Posterize Time.”
4. Change the frame rate to your preferred setting. For example, type “60” to make the video 60 fps.

1. Click “Sequence” > “Render Selection.”

And that’s it! That is how you change a video clip’s frame rate in Adobe Premiere Pro.

How To Make 120 FPS Videos With Premiere Pro

Videos that are 120 fps are very popular now. If you are a gaming content creator on YouTube, you probably record videos at this frame rate. You’d want to edit that footage and export it at the same frame rate.

Adobe Premiere Pro allows you to do that. But it’s a little bit of a hidden feature. When creating a sequence, you may notice that the highest the frame rate can go is 60 frames per second. That’s obviously not the number that we want. Don’t worry. There is a workaround. The best thing is that it’s super easy.

Follow these steps to change your video to 120 fps:

1. Import your 120 fps video to Adobe Premiere Pro.
2. Select your footage. Drag it to your timeline or the tab where the text says, “Drop media here to create sequence.”

1. Select the timeline panel. Click “Sequence” > “Sequence Settings.”
2. Check the “Timebase” section. It should say “119.88 frames/second,” 120 fps when rounded off.

1. Edit the video as needed and render it. The output should stay at 120 fps.

How To Change Video From 30 FPS to 60 FPS in Premiere Pro

Do you have a video recorded at 30 frames per second, and do you want it at 60? Here’s a simple solution to that. Follow these steps in Adobe Premiere Pro to double the video’s frame rate.

1. Open Adobe Premiere Pro. Click “File” > “New” > “Sequence.”

1. Click “AVCHD” > “1080p” > “AVCHD 1080p60” > “OK.”

1. Import your 30 fps video into Adobe Premiere Pro.
2. Drag the video into the timeline.
3. Click “Keep existing settings.”

1. Right-click the video in the timeline. Select “Time interpolation” > “Optical Flow.”

1. Press the “Enter” key. Wait for the processing to finish. This can take hours.
2. Click “File” > “Export” > “Media.”

1. Select a preset.
2. Scroll down to the “Effects” section to check if the frame rate is at 60 fps. If not, change it to 60 fps.

1. Click “Export.”

[Bonus] Wondershare Filmora - Premiere Pro’s Alternative

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

What if you don’t have Adobe Premiere Pro or don’t like this tool? What’s a good alternative? That would be Wondershare Filmora.

Why use Filmora as a substitute for Premiere Pro? This video editor offers lots of great features, basic or advanced. With these at your fingertips, you can bring your videos to the next level and wow your audiences.

Among Filmora’s handy features is the ability to quickly change a video’s frame rate. You don’t even need to be a video editing expert to do it with this software! That’s how straightforward the process is.

How To Change the Frame Rate in Wondershare Filmora

Changing a video’s frame rate in Wondershare Filmora is super easy. Even a child can do it due to how simple the steps are. Here, read this 5-step guide to change a video’s frame rate using this amazing video editor.

1. Launch Wondershare Filmora and create a new project.

1. Import the video whose frame rate you want to change.
2. Drag the video into the timeline.

1. Click “Export.”
2. Select the format you want the output file to be in. Find the “Frame Rate” in the options, click the drop-down menu, and select the frame rate that you want. Click “Export.”

Conclusion

Getting the frame rate of a video right is important, so you should not neglect it. It greatly affects your audience’s viewing experience. Thankfully, if you make mistakes, you can correct them with video editors like Premiere Pro. If it’s not to your liking, you can use Wondershare Filmora instead - it’s the best alternative.

Filmora lets you change a video’s frame rate very easily. Also, it gives you a bunch of other features you might enjoy using. And here’s some good news: this software app is affordable! You can also download the free trial to give it a shot.

Free Download For macOS 10.14 or later

What if you don’t have Adobe Premiere Pro or don’t like this tool? What’s a good alternative? That would be Wondershare Filmora.

Why use Filmora as a substitute for Premiere Pro? This video editor offers lots of great features, basic or advanced. With these at your fingertips, you can bring your videos to the next level and wow your audiences.

Among Filmora’s handy features is the ability to quickly change a video’s frame rate. You don’t even need to be a video editing expert to do it with this software! That’s how straightforward the process is.

How To Change the Frame Rate in Wondershare Filmora

Changing a video’s frame rate in Wondershare Filmora is super easy. Even a child can do it due to how simple the steps are. Here, read this 5-step guide to change a video’s frame rate using this amazing video editor.

1. Launch Wondershare Filmora and create a new project.

1. Import the video whose frame rate you want to change.
2. Drag the video into the timeline.

1. Click “Export.”
2. Select the format you want the output file to be in. Find the “Frame Rate” in the options, click the drop-down menu, and select the frame rate that you want. Click “Export.”

Conclusion

Getting the frame rate of a video right is important, so you should not neglect it. It greatly affects your audience’s viewing experience. Thankfully, if you make mistakes, you can correct them with video editors like Premiere Pro. If it’s not to your liking, you can use Wondershare Filmora instead - it’s the best alternative.

Filmora lets you change a video’s frame rate very easily. Also, it gives you a bunch of other features you might enjoy using. And here’s some good news: this software app is affordable! You can also download the free trial to give it a shot.

In This Article, You Will Learn Easy Ways to Edit Videos Using a Mouse in Wondershare Filmora. You Can Do Video Editing without a Keyboard After Reading This Article

Have you ever wondered, what if somehow your keyboard just broken or disappeared? And you’re stuck in the middle of your project with just a mouse. Don’t know how to proceed remaining project with a mouse? Then no worries! We got you.

This article will guide you how to use stock videos and stock audio to create a music video. The catch, you say? We will be doing that only with a use of a mouse.

Things To Know Before Editing

Let us be honest, most shortcuts are not available without the keyboard. To counter that, our approach will need to be more general. General here means you need to know all the necessary controls and panels.

Take the challenge and find a solution together

To counter these difficulties, even if you have a keyboard, you can imagine yourself in a situation. A situation in which we have a keyboard but will not be using it.

Therefore, presenting us with a challenge, so if you someday come across a situation like this, you will be prepared. All in all, you would be learning more things by returning to the roots of your practice, which in most cases, can prove helpful.

Get Ready With the Professional Editing Tool

Before getting into the editing process handicapped from resources, you need to be familiar with the software that we will use. We will use Wondershare Filmora You can click the link below and catch it up.

Create a Music Video Without a Keyboard

Let us get started! Whether you have a real mouseless experience or want to take it as a challenge, let’s get the things clear first.

• We need to create a 20 seconds music video.
• We will only be using the footage from the stock library.
• We will be using music from the Wondershare Filmora library.
• We will have 5 minutes to review the footage and the music available.
• And most importantly, we don’t have a keyboard.

Step 1. Review your footage

Our first and most crucial step will be to use our imagination and creativity. So get those neurons firing, and let us go!

• Head to the stock media folder on the bar mentioned above, the Wondershare Filmora.
• Or you can simply look towards the left window, where you will find the sample videos tab.
• Click on the sample videos tab, and a new window will appear on the library screen.
• Here you will find almost more than 20 videos.
• So apart from using the actual recorded footage, we will work our way with what we have from default.
• For the music, we would be scrolling in the stock audio library.
• Click on the audio tab above and start scrolling.
• You will also find some categories in the left window.
• Choose the category of your choice and listen to the audio.

Do whatever suit you best. Keep in mind you only have 5 minutes.

Step 2. Pick music for your clips

Suppose you have found audio that speaks your vibe. The next step would be to find a video that tallies that audio. Let us suppose we have audio that is of the hip-hop genre. Let that creativity shine now!

If you like to add a more classical vibe, pick a classical song or audio from the audio library.

• After picking the song, move on to the sample videos tab and search for videos that match a classic vibe.
• Now random close-up shots of a piano, cinematic footage of a big orchestra, or simple landscapes with minimalistic movement while focusing on a single object, consider the example below.

Now that a scenario is constructed, our next step is to arrange these clips in the Wondershare Filmora timeline.

Step 3. Download the clips and audio

You have 15 minutes to create the music video. Start the timer! Once you have selected a sample video and audio that matches your scenario, you can download them from the bottom right icon on the thumbnail. Only if you still need to download them.

Step 4. Insert the audio into the timeline

• The first step is to drag the audio to the timeline.
• Now play the audio from the start. If you can work with the audio as a whole, then it’s perfect.

If you want your audio to start at a certain point. You have to follow the below-mentioned steps. It is as simple as that!

• Add your audio to the timeline.
• Then move the timer or the slider where you want your audio to start.
• Right-click on the audio file. Select split.
• Your audio file will split into two parts.
• Delete the prior file and drag the file ahead to the start of the timeline.

The next step is to add the videos to the timeline.

Step 5. Add the video to the timeline

When you have your audio in the timeline, your next step is adding the video. After you have trimmed or split your audio to your wish, follow the below steps.

• Click and drag to drop the video clips where you want the video to start.
• Play the audio first is a good feature for where you want your video to insert.
• Then adjust the timeline slider on that point.
• Simply drag your video and drop it into the timeline.

Note: now, remember you have multiple videos to match the audio length as we create a music video. The more, the more optimistic. Now, remember you have multiple videos to match the audio length as we create a music video. The more, the more optimistic.

Download the remaining videos that you would wish to be added to the music and follow the steps mentioned above to add the clips where you desire.

Step 6. Finishing touches

You can add some transitions to give your music video a fine touch**.** To add transitions, you can follow the below steps:

• First, click on the transition icon on the bar above. Then, browse as far as your imagination takes you.
• If the effect you want still needs to be downloaded, click on the download icon in the bottom right corner and download the effect.
• Click on the effect and drag it to drop it on your video. It will create a smooth transition while shifting from one video to the other.

Keep going you are almost there!

• Do this for all the videos in the timeline above the audio file.

If you have time, you can also add a few of the effects in the Wondershare Filmora.

• To do so, click on the effect icon on the top bar.
• A window will open to your left, indicating different available effects categories. Select any tab you want that fits your music video scenario.
• Download the effect mentioned above by clicking on the download icon in the bottom right corner of the effect thumbnail.
• Click to drag and drop it on top of your video.

Note: you can do so as many times as you want for the remaining video clips in the timeline.

It seems our 15 minutes are running out! Play the music video from the beginning and review the edits you made. Then, finalize your edits and Voila. You have successfully created a music video using a mouse on Wondershare Filmora.

So in a rare scenario when you don’t have a keyboard, you can just use your mouse to browse the Wondershare Filmora and put those creative ideas to work.

Conclusion

With just a mouse, you have created a music video! How easy is that? Try different music, audio, and video, and then enjoy the rest! Creativity has no limits if you know how to make the most of it by using the tools at your hand. Tell out more about your creative ideas! We love to hear from your side!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Download the remaining videos that you would wish to be added to the music and follow the steps mentioned above to add the clips where you desire.

Step 6. Finishing touches

You can add some transitions to give your music video a fine touch**.** To add transitions, you can follow the below steps:

• First, click on the transition icon on the bar above. Then, browse as far as your imagination takes you.
• If the effect you want still needs to be downloaded, click on the download icon in the bottom right corner and download the effect.
• Click on the effect and drag it to drop it on your video. It will create a smooth transition while shifting from one video to the other.

Keep going you are almost there!

• Do this for all the videos in the timeline above the audio file.

If you have time, you can also add a few of the effects in the Wondershare Filmora.

• To do so, click on the effect icon on the top bar.
• A window will open to your left, indicating different available effects categories. Select any tab you want that fits your music video scenario.
• Download the effect mentioned above by clicking on the download icon in the bottom right corner of the effect thumbnail.
• Click to drag and drop it on top of your video.

Note: you can do so as many times as you want for the remaining video clips in the timeline.

It seems our 15 minutes are running out! Play the music video from the beginning and review the edits you made. Then, finalize your edits and Voila. You have successfully created a music video using a mouse on Wondershare Filmora.

So in a rare scenario when you don’t have a keyboard, you can just use your mouse to browse the Wondershare Filmora and put those creative ideas to work.

Conclusion

With just a mouse, you have created a music video! How easy is that? Try different music, audio, and video, and then enjoy the rest! Creativity has no limits if you know how to make the most of it by using the tools at your hand. Tell out more about your creative ideas! We love to hear from your side!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Also read: