How To Use Speed Ramping to Create an Intense Action Footage

Are you tired of using the same old way to edit your montages? Or do you want to learn to be more professional in your creativity? Don’t worry. We got you.

Here you will learn how to take your videos to the next level using speed ramping with a professional video editor- Wondershare Filmora. Moreover, you will get to know two ways to add the effect.

1. Using speed ramping effect and glitch effects.
2. Using the standard speed settings.

These effects can work well for any action sports or dance video. Let’s check out about speed ramping effect and ways to add it.

Part 1. What is speed ramping?

You’ve probably seen speed ramping used in suspenseful moments of a basketball video before, like a ball bouncing on the rim or a long buzzer-beating shot.

With speed ramping, we can slow down our most exciting moments to show our audience. And then speed it up again to keep pace with the music or action. So it will give you a smooth transition effect.

Part 2. How to enhance action videos with the speed ramping effect?

For example, we’ll create an intense basketball video with speed ramping and glitch effects in Filmora . Then, to show you how to show off your filming, editing, and basketball skills.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1 Shot the footage

To edit a montage, you must first capture it correctly. For our example footage, we want to ensure we have set our camera to a higher frame rate for filming this type of video since we’re going to use slow motion.

How to capture the best footage?

You can shoot handheld with a camera or a mobile phone because it allows you to move around your talent and catch some movements and action while giving a shaky camera effect for added suspense. To make evenly balanced videos, you can use a gimbal stabilizer. Here are some tips to get better shots.

• Change camera angles. Try getting shots low to the ground as well as at higher angles. That will give you more options to cut between when you edit the video.
• Get various shots. You can get shots of dribbling, shooting, and just running with the ball to work with.
• Try shooting on a longer lens. It is because you may not be able to get close to the action.
• Record footage in slow mode on your camera or phone. It will allow you to capture more frames: the more frames, the smoother the slow-motion effect.

Best capturing will make your video more cinematic and visually pleasing after preparing the footage. Finally, we will dive into edit tutorials on speed ramping and glitch effects separately for better understanding.

Step2 Edit the speed of footage in Filmora

There are two ways to achieve the speed ramping effect. One is to use the speed ramping feature to adjust the video speed—the other way to achieve a similar effect is by using the standard speed settings.

Edit with speed ramping feature in Filmora

The speed ramping feature is included in Filmora standard license. So let’s start by opening Filmora.

1. Import media

First, import a video from your media library in the Wondershare Filmora. And drag the clip down on the timeline to start editing.

2. Apply the speed ramping feature

To apply the speed ramping feature, right-click on the clip on the timeline. And click speed in the menu and choose speed ramping to open the settings window.

You can choose different speed templates in the setting window. Or, on the left corner, click on the customize option to adjust the keyframes and create the speed you want for the video.

The lower keyframe is when the video is slowest, and the peak is when the video is fastest. The middle parts between the keyframes are when it speeds up or slows down to reach the specific speed you set on each keyframe.

Grab the keyframes and move them up to increase the speed or down to slow down the rate. You can also add more keyframes by moving the playhead to the spot where you want to change speed and clicking the plus button.

After adjusting our keyframes, we can play it back to see if we like the result.

Edit with standard speed settings in Filmora

Since speed ramping can only be used for paid users, we also provide you with an alternative way to give an exact transition effect, like speed ramping. Check out the following steps to add it.

1. You can drag the video from your library to the timeline. While in the timeline, double-click to open the speed menu. Then choose the starting speed you want your video to be with the speed slider.

2. Next, move your playhead to the point of the video you want to slow down the speed. Here we will cut and then double-click that clip to open the speed menu again. Change the pace with the speed slider again

Following the above steps, a speed ramping style effect can be created without using the premium feature. Stealthy, isn’t it?

Step3 Add some intensity to shots with the BCC glitch effect

We will use Boris FX BCC glitch to add some intensity to our video. It is a plug-in built-in Filmora and gives a feeling of chaos to match the action in the video. To apply the BCC glitch effect to the video.

• Click on the effects options in the top bar. For example, a window on the left side showing you the option Boris FX will have a sub-option BCC stylize. Click on it.
• Drag the effect above the place you want it in the timeline.
• Double-click the effect to open its settings.
• A drop-down menu at the top of the screen has tons of glitch presets to try out.
• We are going to scroll down and select shake with motion blur. This preset will use the exact look we want for our basketball video to make the speed ramping more intense.

• You can change the settings around after choosing a preset. For example, let’s turn up the glitch intensity to have our glitch a little more extreme. Moving further, we can change the glitch duration to our specific needs.

Now we can watch our video to see our glitch with the motion blur effect. Isn’t it crazy to make a cinematic video by yourself? The speed ramping feature and glitch effects can bring any sports video to the next level.

Free Download For macOS 10.14 or later

Step1 Shot the footage

To edit a montage, you must first capture it correctly. For our example footage, we want to ensure we have set our camera to a higher frame rate for filming this type of video since we’re going to use slow motion.

How to capture the best footage?

You can shoot handheld with a camera or a mobile phone because it allows you to move around your talent and catch some movements and action while giving a shaky camera effect for added suspense. To make evenly balanced videos, you can use a gimbal stabilizer. Here are some tips to get better shots.

• Change camera angles. Try getting shots low to the ground as well as at higher angles. That will give you more options to cut between when you edit the video.
• Get various shots. You can get shots of dribbling, shooting, and just running with the ball to work with.
• Try shooting on a longer lens. It is because you may not be able to get close to the action.
• Record footage in slow mode on your camera or phone. It will allow you to capture more frames: the more frames, the smoother the slow-motion effect.

Best capturing will make your video more cinematic and visually pleasing after preparing the footage. Finally, we will dive into edit tutorials on speed ramping and glitch effects separately for better understanding.

Step2 Edit the speed of footage in Filmora

There are two ways to achieve the speed ramping effect. One is to use the speed ramping feature to adjust the video speed—the other way to achieve a similar effect is by using the standard speed settings.

Edit with speed ramping feature in Filmora

The speed ramping feature is included in Filmora standard license. So let’s start by opening Filmora.

1. Import media

First, import a video from your media library in the Wondershare Filmora. And drag the clip down on the timeline to start editing.

2. Apply the speed ramping feature

To apply the speed ramping feature, right-click on the clip on the timeline. And click speed in the menu and choose speed ramping to open the settings window.

You can choose different speed templates in the setting window. Or, on the left corner, click on the customize option to adjust the keyframes and create the speed you want for the video.

The lower keyframe is when the video is slowest, and the peak is when the video is fastest. The middle parts between the keyframes are when it speeds up or slows down to reach the specific speed you set on each keyframe.

Grab the keyframes and move them up to increase the speed or down to slow down the rate. You can also add more keyframes by moving the playhead to the spot where you want to change speed and clicking the plus button.

After adjusting our keyframes, we can play it back to see if we like the result.

Edit with standard speed settings in Filmora

Since speed ramping can only be used for paid users, we also provide you with an alternative way to give an exact transition effect, like speed ramping. Check out the following steps to add it.

1. You can drag the video from your library to the timeline. While in the timeline, double-click to open the speed menu. Then choose the starting speed you want your video to be with the speed slider.

2. Next, move your playhead to the point of the video you want to slow down the speed. Here we will cut and then double-click that clip to open the speed menu again. Change the pace with the speed slider again

Following the above steps, a speed ramping style effect can be created without using the premium feature. Stealthy, isn’t it?

Step3 Add some intensity to shots with the BCC glitch effect

We will use Boris FX BCC glitch to add some intensity to our video. It is a plug-in built-in Filmora and gives a feeling of chaos to match the action in the video. To apply the BCC glitch effect to the video.

• Click on the effects options in the top bar. For example, a window on the left side showing you the option Boris FX will have a sub-option BCC stylize. Click on it.
• Drag the effect above the place you want it in the timeline.
• Double-click the effect to open its settings.
• A drop-down menu at the top of the screen has tons of glitch presets to try out.
• We are going to scroll down and select shake with motion blur. This preset will use the exact look we want for our basketball video to make the speed ramping more intense.

• You can change the settings around after choosing a preset. For example, let’s turn up the glitch intensity to have our glitch a little more extreme. Moving further, we can change the glitch duration to our specific needs.

Now we can watch our video to see our glitch with the motion blur effect. Isn’t it crazy to make a cinematic video by yourself? The speed ramping feature and glitch effects can bring any sports video to the next level.

Are You Looking for Dark LUTs Premiere Pro Free? This Article Discusses the Dark Moody LUTs with Top Recommendations for Beginning Visual Editing

Look-up tables (LUTs) are visual editing tools used as color presets. By using LUTs, you can enhance color grading within photos and videos. This way, your visual content looks more aesthetic, engaging, and appealing. Meanwhile, within LUTs, there are several color presets to use. The most popular one is dark moody LUT. In this article, you’ll find useful information on dark moody LUTs with the best recommendations.

Part 1: What Do Dark Moody LUTs Represent?

Like another color preset, dark moody LUTs provide special and unique color grading. So, you’ll experience darkened shadows, desaturated tones, blue tints, green hues, and others. The dark preset filters offer moody looks with pitch-dark effects to your visual content. Hence, these types of LUTs add a foreboding atmosphere.

Dark and moody LUTs are used in horror films or thriller cinematography. After all, they provide dedicated dark contrast with gloomy looks to the visual content. Hence, a special dark horror effect is blended, which adds mystery, tension, and fear. For adding dark moody LUTs, several tools are available for enhancing colors.

Empower your videos with a new mood using different LUTs. Filmora now offers 100+ top-quality 3D LUTs cover a broad range of scenarios. Transform your videos with Filmora’s powerful 3D LUTs.

Apply LUT on Videos Apply LUT on Videos Learn More

Try It Free >>

Part 2: Best Dark Moody LUTs You Can Find

LUTs are perfect for enhancing color gradients with minimal effort. This means you don’t need to spend long hours on video editing. With dark moody LUTs, there is an option to make your video more cinematic. Let’s find some of the best dark moody LUTs to make things easier:

1. Dark Moody LUTS Fashion

Elevate your photos and videos with these cinematic dark moody LUTs filters. There are 4 LUT presets that could be utilized to blend dark contrast. Hence, you can provide muted looks to your visual content with a mystery tone. The LUTs are ideal for fashion use because of dark shadows. For social media content, these LUTs are ideal.

2. Dark and Moody Cinematic 3D LUTs

Videography and photography are incomplete without color enhancement through editing. Saving time, these dark and moody cinematic 3D LUTs pack is a perfect solution. If you want desaturated contrast with muted colors, there are 8 different LUTs to assist. Apply all the LUT preset filters easily without hassles. With 4 separate files, the LUTs will suit almost every editing tool.

3. Dark Moody Lightroom Presets

Improvise your closest visual media with dark moody Lightroom presets. You will get 20 different dark LUTs Premiere Pro free in this pack. All available LUT filter presets are unique, with different dark contrasts and tones. Thus, you can add a moody touch with desaturated color gradients. This way, your photos, and videos will enlighten with a murk appearance.

4. Film Noir LUTs and Presets Pack

Adding film-like dark cinematic looks is possible with this LUTs preset pack. The availability of 50 preset filters allows adding dark moods to your visual media. The content becomes visually appealing with crushed black hues and darker and gloomy textures. The filters are instantly applied and can be edited with desired intensity and contrast.

5. Dark & Moody Aesthetic Filters

This dark and moody LUTs filter pack has everything to beautify your photos and videos. With 5 different filter presets, transform color gradients with cool hues and less vibrant colors. This will provide dark aesthetic looks to your visual content with desaturated tone. This exceptional grading with moody filters allows upscaling colors for social media content.

6. MOODY NORDIC LUTS

The Nordic region is known for its attractive landscapes with dark weather. Adding such LUTs to your videos enhances color hues with gloomy and dark gradients. This will provide cinematic looks to your videos in an engaging way. The available LUTs are in 5 color presets, and each one is unique. Thus, your travel videos can become more pleasing using Nordic effects.

Part 3: Wondershare Filmora: A Great Platform For Using Dark Moody LUTs

For video upgradation, editing is essential to overcome underlying visual hindrances. Meanwhile, a good video editor is necessary for this purpose. Meet Wondershare Filmora that is a creative video editing platform for content creators. Using this tool, you can use 100+ LUTs, including dark moody LUTs. You can also utilize elements, stickers, transitions, and other effects.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Filmora is the industry-leading tool for enhancing video quality with suitable color gradients. The filters are fully creative with adjustable contrast and saturation. Meanwhile, Filmora has added 100+ LUTs in its new updates. This means there are more than 200 LUTs in Filmora. When it comes to usability, Filmora offers best-in-class tools with amazing functionalities.

Key Features Of Wondershare Filmora

Filmora is an easy-to-use platform that delivers video editing with optimized solutions. Let’s find more of its features that make it an exceptional tool:

• Audio Support: With Filmora, users can add songs, voiceovers, and music to their videos. This can make their videos more enchanting. Meanwhile, there is also an option to merge, split, crop, or customize audio speed. Using an audio visualizer is also a possibility by adjusting audio bass, treble, and frequencies.
• Color Grading: There is a color wheel by which you can set desired color palette. This way, you can transform your video into desired color contrast with necessary gradients. The color intensity could also be adjusted from 0 – 100% range. With available LUT preset filters, different color effects could be applied.
• Split Screen: The availability of a split screen function allows for playing different videos at one time. Thus, combining or comparing different videos will be easier to process. This will save you time and simplify your video editing procedure.
• Text-to-Speech: Filmora’s text-to-speech allows you to create voiceovers from text files. This will enrich your video and give useful content with more elements. The transcription process is quick and fast with more accuracy. This feature is available in up to 16 types of languages.

Conclusion

Using LUTs, you can enhance and optimize the color grading of your video. Meanwhile, if your video is horror or suspense relevant, use dark LUTs Premiere Pro free. This adds dark shades to your video with desaturated contrasts and crushed black hues. So, if you want the best dark moody LUTs free download, Filmora is the right solution. This tool provides unique and special LUTs in different categories.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Apply LUT on Videos Apply LUT on Videos Learn More

Try It Free >>

Part 2: Best Dark Moody LUTs You Can Find

LUTs are perfect for enhancing color gradients with minimal effort. This means you don’t need to spend long hours on video editing. With dark moody LUTs, there is an option to make your video more cinematic. Let’s find some of the best dark moody LUTs to make things easier:

1. Dark Moody LUTS Fashion

Elevate your photos and videos with these cinematic dark moody LUTs filters. There are 4 LUT presets that could be utilized to blend dark contrast. Hence, you can provide muted looks to your visual content with a mystery tone. The LUTs are ideal for fashion use because of dark shadows. For social media content, these LUTs are ideal.

2. Dark and Moody Cinematic 3D LUTs

Videography and photography are incomplete without color enhancement through editing. Saving time, these dark and moody cinematic 3D LUTs pack is a perfect solution. If you want desaturated contrast with muted colors, there are 8 different LUTs to assist. Apply all the LUT preset filters easily without hassles. With 4 separate files, the LUTs will suit almost every editing tool.

3. Dark Moody Lightroom Presets

Improvise your closest visual media with dark moody Lightroom presets. You will get 20 different dark LUTs Premiere Pro free in this pack. All available LUT filter presets are unique, with different dark contrasts and tones. Thus, you can add a moody touch with desaturated color gradients. This way, your photos, and videos will enlighten with a murk appearance.

4. Film Noir LUTs and Presets Pack

Adding film-like dark cinematic looks is possible with this LUTs preset pack. The availability of 50 preset filters allows adding dark moods to your visual media. The content becomes visually appealing with crushed black hues and darker and gloomy textures. The filters are instantly applied and can be edited with desired intensity and contrast.

5. Dark & Moody Aesthetic Filters

This dark and moody LUTs filter pack has everything to beautify your photos and videos. With 5 different filter presets, transform color gradients with cool hues and less vibrant colors. This will provide dark aesthetic looks to your visual content with desaturated tone. This exceptional grading with moody filters allows upscaling colors for social media content.

6. MOODY NORDIC LUTS

The Nordic region is known for its attractive landscapes with dark weather. Adding such LUTs to your videos enhances color hues with gloomy and dark gradients. This will provide cinematic looks to your videos in an engaging way. The available LUTs are in 5 color presets, and each one is unique. Thus, your travel videos can become more pleasing using Nordic effects.

Part 3: Wondershare Filmora: A Great Platform For Using Dark Moody LUTs

For video upgradation, editing is essential to overcome underlying visual hindrances. Meanwhile, a good video editor is necessary for this purpose. Meet Wondershare Filmora that is a creative video editing platform for content creators. Using this tool, you can use 100+ LUTs, including dark moody LUTs. You can also utilize elements, stickers, transitions, and other effects.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Filmora is the industry-leading tool for enhancing video quality with suitable color gradients. The filters are fully creative with adjustable contrast and saturation. Meanwhile, Filmora has added 100+ LUTs in its new updates. This means there are more than 200 LUTs in Filmora. When it comes to usability, Filmora offers best-in-class tools with amazing functionalities.

Key Features Of Wondershare Filmora

Filmora is an easy-to-use platform that delivers video editing with optimized solutions. Let’s find more of its features that make it an exceptional tool:

• Audio Support: With Filmora, users can add songs, voiceovers, and music to their videos. This can make their videos more enchanting. Meanwhile, there is also an option to merge, split, crop, or customize audio speed. Using an audio visualizer is also a possibility by adjusting audio bass, treble, and frequencies.
• Color Grading: There is a color wheel by which you can set desired color palette. This way, you can transform your video into desired color contrast with necessary gradients. The color intensity could also be adjusted from 0 – 100% range. With available LUT preset filters, different color effects could be applied.
• Split Screen: The availability of a split screen function allows for playing different videos at one time. Thus, combining or comparing different videos will be easier to process. This will save you time and simplify your video editing procedure.
• Text-to-Speech: Filmora’s text-to-speech allows you to create voiceovers from text files. This will enrich your video and give useful content with more elements. The transcription process is quick and fast with more accuracy. This feature is available in up to 16 types of languages.

Conclusion

Using LUTs, you can enhance and optimize the color grading of your video. Meanwhile, if your video is horror or suspense relevant, use dark LUTs Premiere Pro free. This adds dark shades to your video with desaturated contrasts and crushed black hues. So, if you want the best dark moody LUTs free download, Filmora is the right solution. This tool provides unique and special LUTs in different categories.

Add LUTs on Video For Win 7 or later(64-bit)

Add LUTs on Video For macOS 10.14 or later

Try It Free >>

Discover the Essential Steps for Editing a Music Video in This Guide. Learn About Aspect Ratio and the First Cut Process to Create a Visually Captivating Video

Are you planning to edit your music video? Do you need on out how to edit your first music video draft? Editing a music video is a creative task but can be challenging.

One of the key elements of this process is selecting the aspect ratio and making the first cut. In this blog, we will explore these steps in detail, providing important tips and tricks. Whether you’re a beginner or an experienced editor, get ready to take your music video to the next level. Let’s get started.

Which software will you need?

As we have a lot of software in the market, we must select the right software for high-quality editing. Wondershare Filmora is an amazing video editing software. It offers a ton of video editing tools. You can add special effects, transitions, and more to make your music video captivating.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Add Neon Effects to Your Dance Videos with the Help of Wondershare Filmora After Reading This Article. It Will Give a More Thrilling and Exciting Appearance

Neon colors in videos are constantly attracting and compelling the scenes. So how it looks if dancing videos have this feature? For sure, it’ll be dreamier and more classy.

After moving toward, the following steps of processing neon effects, you will find different effects to make your video filmier. Wondershare Filmora provides all types of products on one platform. Then try it out and enjoy the rest. Scroll more to learn about the neon effect before editing your video!

Neon Dance Effects in Wondershare Filmora

You often watch viral dance videos or commercials in which a neon highlight of a person dances aside from them in the video. Yes! You can also make that just in a few minutes.

In this case, Wondershare Filmora is considered to be your partner. Filmora is a fantastic tool that you can have at your disposal to edit a range of videos. There are tons of neon effects in Filmora, including neon frames, neon swings, or even multiple neon overlays.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Steps to Make a Neon Dance Effect With Filmora

The public is tired now of seeing old video graphics in dancing videos. It’s time to add neon colors to give a fascinating look. Follow the step-by-step guide mentioned below, and let’s get going!

Step1 Import Clips into the Timeline

Before we begin to edit our video, make sure you download Wondershare Filmora. First, you need to create a timeline to edit our dancing clips. For this, take a look at the below steps!

• Click on the Import icon in the main window when you open Wondershare Filmora.
• Then, import the video clips you want to edit.
• Now, drag the Video and drop it in the editing timeline below.

Step2 Add the Same Video again

We aim to create a black background for the original video we imported above. To do so, follow the steps mentioned below.

• Drag and drop the same video on the timeline.
• Make sure to drag and drop it above the original video.

Step3 Go into the Compositing Mode

After adding the same video, now convert BG into a black screen. For this, follow the given steps:

• Double-Click on the video we added later.
• A video editing panel will open up in the Import
• Scroll down till you see the compositing tab.
• Here will have to change the Blending mode.
• Click on the tab ahead that is labeled “Norma“
• A drop-down option will open up.
• In this drop-down option, scroll below to “Difference“.

• As soon as you click on the Difference option, you will notice a change in the main play window; it will all turn to a black screen.

Step4 Add the Pixelated Edges effect

Our target is to outline the individual in the video, so we can move on to create the Neon Highlight effect. To do so, follow these steps!

• First, go into the effects option that you can select from the tab above the import window.
• In the effects panel, search for the Pixelated edges
• You will notice a search bar in the top right corner. Type “Pixelated edges,“ and you will see some effects pop up in the import window.

• Select the Pixelated edges effect. Then, click and drag it below the video that we turned to black using the Difference
• The edges of the individual dancing in the video will be outlined.

Step5 Change the outline color

You may not like the default color with the Pixelated edges effect. But no worries, you can change that to whatever color you desire by following these steps:

• Double-Click on the video in which you added the effect.
• An editing panel will pop up.
• Click on the Effect option below the Video
• Here, you can see the color option.
• Click on the color and select whatever suits you the best.

Step6 Create Multiple Outlines

It would help if you created multiple outlines to achieve the Neon Dance effect. These multiple outlines will be produced by exporting them multiple times with the color you want. Follow the below points to get it instantly!

• When you have selected the color for your outline, export the video by clicking on the Export icon in the top right corner.

• When you have exported the video, move back to the timeline to edit again.
• As we had selected the Blue color for reference, now choose another color you wish.
• After changing the video, export it again.

Note: Export as many times as you want with the color of your choice. E.g., 5 colors = 5 exports.

Step7 Import the exported videos

• Now you have to import the videos that you exported.
• Before doing that, first, delete the video in track 2. (The video on which we applied the Difference)
• Now select all the exports from your library and import them onto the import window.
• Please select all of them and drag them on the timeline.

Note: You don’t want all the outlines to play simultaneously. Otherwise, the outlines will not appear to be separate.

• To do so, stack the videos on each other on different tracks.

Tip: The trick here will be to offset the video by a few seconds so that each video plays a little later than the other.

To efficiently blend the outlines with the green screen, you can change the blending mode of each of the exported videos to “Lighten.”

• Double-click on each video.
• In the editing panel, choose compositing.
• From there, select the “Lighten“ option.

Step8 Add the Glow effect

To make the outlines glow like Neon lights, we will need to add another effect from the effects library.

• Go to the effects tab and search for “Glow.”
• Click and drag the glow effect to each of the exported videos.

You can make it more fun by going one step further!

• Double-click on each of the glow effects that you added.
• In effect, the editing panel goes to the video effects.
• Here, you can change the radius of the Glow effect you added.
• Similarly, you can do it in all the other videos.

Step9 Apply the Green screen effect

We will change our green screen for the final part. Follow the last steps, and then enjoy!

• Move the green screen footage below them all to the top track.
• Double-click the video to enter the editing panel.
• Go to the chroma key (Green Screen) in the editing panel**.**
• Click on the arrow aside from the tab.

You will immediately see changes to your video in the main play window. Play the video from the start and notice the changes.

Congratulations! You have successfully created Neon Dance effects by using the user-friendly Wondershare Filmora.

Conclusion

Wondershare Filmora offers a variety of editing features that you can use to create very innovative videos. You can quickly create Neon effects in your dance videos next time by following the above steps! Add more creativity to attract more audience. Have fun and explore more effects to get unique results!

Free Download For macOS 10.14 or later

Steps to Make a Neon Dance Effect With Filmora

The public is tired now of seeing old video graphics in dancing videos. It’s time to add neon colors to give a fascinating look. Follow the step-by-step guide mentioned below, and let’s get going!

Step1 Import Clips into the Timeline

Before we begin to edit our video, make sure you download Wondershare Filmora. First, you need to create a timeline to edit our dancing clips. For this, take a look at the below steps!

• Click on the Import icon in the main window when you open Wondershare Filmora.
• Then, import the video clips you want to edit.
• Now, drag the Video and drop it in the editing timeline below.

Step2 Add the Same Video again

We aim to create a black background for the original video we imported above. To do so, follow the steps mentioned below.

• Drag and drop the same video on the timeline.
• Make sure to drag and drop it above the original video.

Step3 Go into the Compositing Mode

After adding the same video, now convert BG into a black screen. For this, follow the given steps:

• Double-Click on the video we added later.
• A video editing panel will open up in the Import
• Scroll down till you see the compositing tab.
• Here will have to change the Blending mode.
• Click on the tab ahead that is labeled “Norma“
• A drop-down option will open up.
• In this drop-down option, scroll below to “Difference“.

• As soon as you click on the Difference option, you will notice a change in the main play window; it will all turn to a black screen.

Step4 Add the Pixelated Edges effect

Our target is to outline the individual in the video, so we can move on to create the Neon Highlight effect. To do so, follow these steps!

• First, go into the effects option that you can select from the tab above the import window.
• In the effects panel, search for the Pixelated edges
• You will notice a search bar in the top right corner. Type “Pixelated edges,“ and you will see some effects pop up in the import window.

• Select the Pixelated edges effect. Then, click and drag it below the video that we turned to black using the Difference
• The edges of the individual dancing in the video will be outlined.

Step5 Change the outline color

You may not like the default color with the Pixelated edges effect. But no worries, you can change that to whatever color you desire by following these steps:

• Double-Click on the video in which you added the effect.
• An editing panel will pop up.
• Click on the Effect option below the Video
• Here, you can see the color option.
• Click on the color and select whatever suits you the best.

Step6 Create Multiple Outlines

It would help if you created multiple outlines to achieve the Neon Dance effect. These multiple outlines will be produced by exporting them multiple times with the color you want. Follow the below points to get it instantly!

• When you have selected the color for your outline, export the video by clicking on the Export icon in the top right corner.

• When you have exported the video, move back to the timeline to edit again.
• As we had selected the Blue color for reference, now choose another color you wish.
• After changing the video, export it again.

Note: Export as many times as you want with the color of your choice. E.g., 5 colors = 5 exports.

Step7 Import the exported videos

• Now you have to import the videos that you exported.
• Before doing that, first, delete the video in track 2. (The video on which we applied the Difference)
• Now select all the exports from your library and import them onto the import window.
• Please select all of them and drag them on the timeline.

Note: You don’t want all the outlines to play simultaneously. Otherwise, the outlines will not appear to be separate.

• To do so, stack the videos on each other on different tracks.

Tip: The trick here will be to offset the video by a few seconds so that each video plays a little later than the other.

To efficiently blend the outlines with the green screen, you can change the blending mode of each of the exported videos to “Lighten.”

• Double-click on each video.
• In the editing panel, choose compositing.
• From there, select the “Lighten“ option.

Step8 Add the Glow effect

To make the outlines glow like Neon lights, we will need to add another effect from the effects library.

• Go to the effects tab and search for “Glow.”
• Click and drag the glow effect to each of the exported videos.

You can make it more fun by going one step further!

• Double-click on each of the glow effects that you added.
• In effect, the editing panel goes to the video effects.
• Here, you can change the radius of the Glow effect you added.
• Similarly, you can do it in all the other videos.

Step9 Apply the Green screen effect

We will change our green screen for the final part. Follow the last steps, and then enjoy!

• Move the green screen footage below them all to the top track.
• Double-click the video to enter the editing panel.
• Go to the chroma key (Green Screen) in the editing panel**.**
• Click on the arrow aside from the tab.

You will immediately see changes to your video in the main play window. Play the video from the start and notice the changes.

Congratulations! You have successfully created Neon Dance effects by using the user-friendly Wondershare Filmora.

Conclusion

Wondershare Filmora offers a variety of editing features that you can use to create very innovative videos. You can quickly create Neon effects in your dance videos next time by following the above steps! Add more creativity to attract more audience. Have fun and explore more effects to get unique results!

Also read: