8 Tips to Apply Cinematic Color Grading to Your Videos

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

Try It Free Try It Free

After a successful video shoot, video editing tends to wrap up the video production process. However, a video cannot be enlivened by using simple video editing tools, i.e., cut, crop, and trim, but rather tools such as cinematic color grading. Usually, directors want their video to evoke their intended ambiance and appear more realistic – This can only be achieved through cinematic color grading.

Color grading is the alteration and enhancement of color in a video, motion picture, or still image. Color grading is an essential tool for videographers since it enables them to enhance the mood or tone. Stick to this article and learn about the eight tips to apply cinematic color grading to your video.

In this article

01 Don’t Make These Mistakes!

02 8 Tips to Apply Cinematic Color Grading to Your Video

Don’t Make These Mistakes

Even though to err is human, there are some mistakes that colorists and video editors need to avoid at all costs. It is not only because they will make them look amateurish but also undermines the message and impact of the video.

Some people assume color grading is as simple as adding filters to their Instagram photos which they are absolutely wrong. Color grading is a long and frustrating process, and it only requires “persons with a thick skin.”

Some mistakes are not only committed by amateurs alone but also professional colorists who are in a rush to complete their projects on due time. Usually, these mistakes degrade the quality output. Some of the mistakes that one needs not make include:

1. Using a Poorly Calibrated Monitor

Almost every videographer and colorist’s goal is to design footages that distinctively display their primary colors and decipher the intended message. And this can only be achieved using a properly calibrated monitor.

Before working on a project, you ought to crosscheck your monitor calibration. Most people assume that the calibration is accurate since they possess a new, out-of-the-box monitor. It is utterly wrong since retailer shops usually adjust the monitor settings to overblown saturation and contrast to attract customers.

Furthermore, if you opt to edit your videos without adjusting your monitor calibration, you will have a poor footage.

2. Poor Prepping of the Video Footage

One major mistake that videographers often make is not prepping their video correctly. A poorly prepped footage is one that has a bad color space conversion. Usually, the outcome result of poorly prepped footage is an imbalanced image.

Prepping footage is not as easy as an apple pie. Besides, most videographers tend to follow a shortcut by starting messing with the gains and individual nodes, forgetting that a shortcut is often a wrong cut.

The best way of prepping a video is to start by making separate nodes and labeling them differently.

3. Imbalancing the Shadow

Have you ever seen video footage with partially opaque shadows? And when you look keenly, you see tinted greens and reds. Usually, this is a result of an imbalanced shadow.

This mistake is not only carried out by beginner videographers but also professionals who are always in a hurry to complete a project. When you look at your scope, you see the shadows are lifted or down in other scenarios – This is also a result of shadow imbalance.

4. Overusing LUTs

A mistake that beginner editors often make is overusing LUTs. Footages with overly used LUTs often appear to be dull. A thing that videographers need to observe when using LUTs is consistency.

When using LUTs, you need to ensure that your project has similar saturation, colors, and contrast throughout your video project. Moreover, it would be best to choose your LUTs based on the film color palette and your story.

5. Having Limited break

Having enough break enables one’s eyes to recalibrate. As a colorist, your eyes are often considered the main asset. Sitting for long periods in your workstation and staring for long hours at your monitor may cause one to add more saturation and contrast, thus making the video dull. Therefore the best remedy is to take a break from your monitor.

Besides, coming from a break enables one to have another different perspective about the color grading of the project.

8 Tips to Apply Cinematic Color Grading to Your Video

When it comes to creating cinematic looks in video footage, the camera type is usually non-essential. What matters is that you capture quality videos with the right angles then leave the rest to color grading.

For a video clip to look more cinematic, a couple of elements are put together. Here, we will look at those elements and create stunning videos.

1. Use Lumetri Color to adjust brightness, contrast, and saturation

The Lumeri color is an essential color grading functionality in most premiere software, including Wondershare Filmora, Adobe After Effects, and Davinci Resolve 17. With this functionality tool, you can carry out a wide range of customizable settings such as hue, saturation, contrasts, brightness, and tone.

The lumetri panel contains a histogram, vectorscope, parade scope, and waveform monitor. In your lumetri panel, you can measure the brightness and tonal values using a histogram, the light intensity with a waveform monitor, saturation and hue using vectorscope, and color channel using parade scope.

Adjusting the brightness, contrast, hue, saturation, and tone to moderate levels will give your video clip that cinematic look.

2. Use Cosmo functionality to adjust skin tones

Due to the light effect, shots taken during the day will have inconsistent color matches, especially skin tone. In the post-production process, one needs to make uniformity in skin tone and the clip. To rectify this, you need to involve a professional color grading functionality, Cosmo.

With cosmo, you can adjust the skin color, squeeze the skin, and soften the skin. Generally, Cosmo makes people in video clips look their best.

3. Use Highlights and Shadows adjustment

A clip will look more cinematic when the shadows and highlights are brought out as separate entities. The shadows become more vivid when adjusted to either teal, purple or blue. You can go a mile and adjust the highlights to become crystal clear by making the footage become yellow, red, or orange.

When carrying out color grading, you need to know the various video demands, such as the horror clips demand more of the dark shadow.

4. Use Vectorscope to get the accurate adjustment

Naked eyes cannot effectively see all the errors in a video project, which is the essence of having a vectorscope. A vectorscope provides all the quantitative information about a video image – This lessens work for video editors.

Vectorscope provides extensive details, such as how intense a given color is – This will help you make necessary adjustments to your footage.

5. Use the black and white functionality to change the opacity

Even though you can change your footage to black and white using the hue and saturation functionality, the black and white tool gives you more control.

This functionality feature can make your footage blend with the soft light part. Besides, it is best to first lower the contrast of your image or video to black and white to be able to highlight the unclear parts.

6. Use levels to unveil the whites, blacks, and mids of an image

Levels is a functionality feature that displays the blacks, whites, and mids of footage. With this functionality, you can make the highlight parts lighter and the shadows appear darker, which is essential in making cinematic videos.

In the levels histogram, the left slider defines the darkest part, the right defines the brightest part, and the top defines distributions.

In software such as Adobe After Effects, you can set this functionality to automatic or customize it based on your preference.

7. Use Vibrance to control other levels of saturation

The saturation of video footage or a clip can be regulated using vibrance functionality. With vibrance, you can alter the saturation levels of your clip while simultaneously minimizing clippings for the colors to approach complete saturation.

When you want to use this functionality in After Effects, you drag and drop it right on top of your footage – The exact part you want to apply it.

8. Use a Vignette to fade edges

To increase the point of focus, you need to fade your edges. In color grading, you can only fade your edges with a vignette.

This functionality allows you to center images or certain video parts and make the edges unclear. Your emphasis will be more on the central region.

Bottom line

● Color grading is not a piece of cake. Besides, you should not use it as an excuse for making simple mistakes such as the ones highlighted above. You need to pay close attention when color grading your films, and you will have your video project mapping out its intended meaning.

● Moreover, you need not be a pro to carry out cinematic color grading. You need to follow the above eight tips altogether to apply color grading to your video. You will create stunning video files that leave your viewers’ eyes gorged out.

5 Ways to Denoise a Video

In today’s world, the quality of digital product such as photos and videos increase day by day, prompting us to create our content crystal clear and keep it that way. Of course, different kinds of effects and filters are great, and something called “noise” is one of them, but sometimes it is actually unwanted and makes our footage less likable. What is noise, or denoising, anyway? Well, instead of clear video, it’s something quite different – the footage looks grainy, sometimes excessively, and makes our eyes hurt, or simply, more difficult to see what’s going on on the screen. And if you didn’t decide to use a noise effect, then from where does it appear?..

Noise means a mix of different variations of brightness or color information in the shot. It is likely to show up when there is a low light, and/or when the video is taken with small sensors such as smartphones and action cameras. It works as follows: if someone tries to compensate for low-light settings with gain and ISO, more noise is produced.

But, as our readers already know, almost nothing is ever impossible to solve. There is a way to get rid of this annoying grain, and it is called, as pretty obvious, denoising. Hence, denoising in image and video production is used as a technique to take footage from grainy to crystal-clear. And, as you may already agree, it improves a viewer’s quality of experience. And how does this happen? - There are varied techniques, and each of them uses different mathematical and statistical models.

What is considered a good noise reduction? The technique is successful when it suppresses noise effectively in uniform regions; preserves edges and other characteristics, such as fine details and textures; and provides a visually natural experience.

and here you will learn 5 ways, as in 5 software to denoise a video. We’ll touch upon the following ones: Final Cut Pro, Adobe After Effects, Adobe Premiere Pro, DaVinci Resolve and Movavi Video Editor. But, we are not limited to these ones, so maybe there is one more you could use? You’ll find out in the article!

• Final Cut Pro

Noise that appears as unwanted grain or artifacts in the video image can be removed in Final Cut Pro pretty easily, you just have to follow the little steps for it. Keep in mind that Final Cut Pro is not eligible for PC, this editor is only available for Mac (but Windows users, tune in for the editors functioning on PC’s!)

So, you have your grained footage, which you already chose to denoise, and for which you will need a video reduction effect.

First, you will need to open Final Cut Pro and import abovementioned video. Select this clip in the timeline,

and position the play head in a way that the clip appears in the viewer, that is, on the big screen - for you to see well.

Click the Effects button in the top-right corner of the timeline, or, to use the shortcut, press Command & 5.

In the Effects browser, select the Basics category in the list of Video effects on the left, then select the Noise Reduction effect. For 360° clips, select the 360° category, then select the 360° Noise Reduction effect.

And you will need to do one of the following:

Drag the effect to the timeline clip you want to apply it to, or double-click the effect thumbnail to apply the effect to the selected clip.

When the effect is applied, Final Cut Pro analyzes the clip for noise, so you might need to wait for a little while the process is complete and only then see the result.

Interesting tip you can remember is that if you are using several effects to your video clip, then adding Noise Reduction as the first effect would guarantee the best results for you. So, Mac users, you can start denoising your videos in Final Cut Pro now!

• Adobe After Effects

Adobe After Effects is a digital visual effects, motion graphics, and compositing application… Pretty intense, right? This very software has endless powers, and one of them is, you guessed correctly – denoising the video! So, how are we going to do that in this monster of the industry?

Sometimes what’s annoying about this kind of programs is that you need plugins, so let’s try to find a way to achieve our desired result without using anything external.

So, first of all (as in all cases!) import your video into After Effects. Then, you will need to find Effect in the menu, and find: Noise and Grain. There, you will choose Remove Grain and click on it.

On the left side of the program layout, the Effects Control will be opened. Now, you see viewing mode, where you need to change Preview to Final Output.

So, this will be the video with Preview checked:

Which will look like this when Final Output is checked:

Somewhat different and looking better, right?..

By the way, you can watch the whole process video here !

• Adobe Premiere Pro

Adobe Premiere Pro is one of the most and sophisticated video editor. So, of course, there is a way to reduce noise in this software as well, and this can be reached using effect called Median.

First of all, you add your footage to the Timeline in Premiere Pro and then go find the Effects Panel, where Median can be found. You need to drag and drop the Median effect to your video clip.

The next step is to make sure that adding the effect to the grainiest parts of the clip, which can be done using masks. So, in the Effects Control panel, you’ll need to select the mask shape for your clip – you can either choose rectangle, circle, or pen tool. With the latter you can move the Mask around the screen and resize it to cover the area.

And if you Change the Feather setting to 100, the effect will not have a very visible edge and some smoothness will cover for it.

You will need to repeat the process with more than one mask, if you would like to have covered all of the grainy area of your shot.

Lastly, you’ll need to adjust the effect settings to reduce the noise.

The Median effect doesn’t actually take away the graininess, it just blurs it. You’ll need to experiment with the Radius settings until you are happy with the result.

• DaVinci Resolve

When it comes to DaVinci Resolve, the process is somewhat different in the free version of it. So, first of all, off course, you add your footage into the timeline. Then,you are going to find the fusion tab underneath the timeline panel.

You will see MediaIn1 and MediaOut1, you click on MediaIn1, which will ensure the scene appears in the first viewer – and MediaOut1 by default is appearing in the second. So, now you stay on MediaIn1, hit shift+spacebar, and find the option which says: Remove Noise (RN) and then click Add, which adds the Remove Noise1 node. On the top right corner you will find Inspector, and if you click on it, you will see all the properties you can modify.

After going only into the second viewer, and in the top bar we can find channel icons. We open it and click on red, which makes the footage black and white for a while. Then, we go back to the Inspector, increase Softness Red and Detail Red.

This removes much grain from the red channel. Then we repeat the same for green, as well as for blue channel. Once you finish, you go to the same channel button in the bar and change it to “back to color”. So, the footage will have its colors back and you will see that it has become clearer, compared to the first viewer.

You can play around with the Chroma and Luma channels in the Inspector, if that is something you have ever had experience with!

• Movavi Video Editor

In Movavi Video Editor, it is pretty straightforward – unlike DaVinci Resolve, of course! So, getting to the point: the first thing you need to do is Entering the Edit Mode. In order to achieve it, you’ll need to click the Edit button next to the file you want to adjust or select Adjustments in the Tools tab.

After this, you will be able to select the Noise removal option, and then, move the Noise level slider to reflect the amount of noise you can see in the preview. The more noise you need to remove, the higher the Noise level, and vice versa.

When you’re finished removing the noise, click Apply, but in case you need to remove noise from several files, select Apply to all files, which ensures the same noise level will be applied on all your files there.

Lastly, of course, Wondershare Filmora X offers the same option as well. The steps are ase follows: You need to go to the Effects panel and type: “Smart Denoise”. Then, right-click on the video and choose Edit Properties.

This will make sure you go inside the Smart Denoise, where you can change opacity of the clip, threshold and radius.

You should reduce Opacity until you are satisfied with the result. Then, you can use the box next to Smart Denoise in order to see the scene before and after noise and grain removal.

So, that’s it! – We learned how to remove/reduce noise and grain from the videos, using several video editors. So you might as well start making your video clips look better right away!

Noise that appears as unwanted grain or artifacts in the video image can be removed in Final Cut Pro pretty easily, you just have to follow the little steps for it. Keep in mind that Final Cut Pro is not eligible for PC, this editor is only available for Mac (but Windows users, tune in for the editors functioning on PC’s!)

So, you have your grained footage, which you already chose to denoise, and for which you will need a video reduction effect.

First, you will need to open Final Cut Pro and import abovementioned video. Select this clip in the timeline,

and position the play head in a way that the clip appears in the viewer, that is, on the big screen - for you to see well.

Click the Effects button in the top-right corner of the timeline, or, to use the shortcut, press Command & 5.

In the Effects browser, select the Basics category in the list of Video effects on the left, then select the Noise Reduction effect. For 360° clips, select the 360° category, then select the 360° Noise Reduction effect.

And you will need to do one of the following:

Drag the effect to the timeline clip you want to apply it to, or double-click the effect thumbnail to apply the effect to the selected clip.

When the effect is applied, Final Cut Pro analyzes the clip for noise, so you might need to wait for a little while the process is complete and only then see the result.

Interesting tip you can remember is that if you are using several effects to your video clip, then adding Noise Reduction as the first effect would guarantee the best results for you. So, Mac users, you can start denoising your videos in Final Cut Pro now!

• Adobe After Effects

Adobe After Effects is a digital visual effects, motion graphics, and compositing application… Pretty intense, right? This very software has endless powers, and one of them is, you guessed correctly – denoising the video! So, how are we going to do that in this monster of the industry?

Sometimes what’s annoying about this kind of programs is that you need plugins, so let’s try to find a way to achieve our desired result without using anything external.

So, first of all (as in all cases!) import your video into After Effects. Then, you will need to find Effect in the menu, and find: Noise and Grain. There, you will choose Remove Grain and click on it.

On the left side of the program layout, the Effects Control will be opened. Now, you see viewing mode, where you need to change Preview to Final Output.

So, this will be the video with Preview checked:

Which will look like this when Final Output is checked:

Somewhat different and looking better, right?..

By the way, you can watch the whole process video here !

• Adobe Premiere Pro

Adobe Premiere Pro is one of the most and sophisticated video editor. So, of course, there is a way to reduce noise in this software as well, and this can be reached using effect called Median.

First of all, you add your footage to the Timeline in Premiere Pro and then go find the Effects Panel, where Median can be found. You need to drag and drop the Median effect to your video clip.

The next step is to make sure that adding the effect to the grainiest parts of the clip, which can be done using masks. So, in the Effects Control panel, you’ll need to select the mask shape for your clip – you can either choose rectangle, circle, or pen tool. With the latter you can move the Mask around the screen and resize it to cover the area.

And if you Change the Feather setting to 100, the effect will not have a very visible edge and some smoothness will cover for it.

You will need to repeat the process with more than one mask, if you would like to have covered all of the grainy area of your shot.

Lastly, you’ll need to adjust the effect settings to reduce the noise.

The Median effect doesn’t actually take away the graininess, it just blurs it. You’ll need to experiment with the Radius settings until you are happy with the result.

• DaVinci Resolve

When it comes to DaVinci Resolve, the process is somewhat different in the free version of it. So, first of all, off course, you add your footage into the timeline. Then,you are going to find the fusion tab underneath the timeline panel.

You will see MediaIn1 and MediaOut1, you click on MediaIn1, which will ensure the scene appears in the first viewer – and MediaOut1 by default is appearing in the second. So, now you stay on MediaIn1, hit shift+spacebar, and find the option which says: Remove Noise (RN) and then click Add, which adds the Remove Noise1 node. On the top right corner you will find Inspector, and if you click on it, you will see all the properties you can modify.

After going only into the second viewer, and in the top bar we can find channel icons. We open it and click on red, which makes the footage black and white for a while. Then, we go back to the Inspector, increase Softness Red and Detail Red.

This removes much grain from the red channel. Then we repeat the same for green, as well as for blue channel. Once you finish, you go to the same channel button in the bar and change it to “back to color”. So, the footage will have its colors back and you will see that it has become clearer, compared to the first viewer.

You can play around with the Chroma and Luma channels in the Inspector, if that is something you have ever had experience with!

• Movavi Video Editor

In Movavi Video Editor, it is pretty straightforward – unlike DaVinci Resolve, of course! So, getting to the point: the first thing you need to do is Entering the Edit Mode. In order to achieve it, you’ll need to click the Edit button next to the file you want to adjust or select Adjustments in the Tools tab.

After this, you will be able to select the Noise removal option, and then, move the Noise level slider to reflect the amount of noise you can see in the preview. The more noise you need to remove, the higher the Noise level, and vice versa.

When you’re finished removing the noise, click Apply, but in case you need to remove noise from several files, select Apply to all files, which ensures the same noise level will be applied on all your files there.

Lastly, of course, Wondershare Filmora X offers the same option as well. The steps are ase follows: You need to go to the Effects panel and type: “Smart Denoise”. Then, right-click on the video and choose Edit Properties.

This will make sure you go inside the Smart Denoise, where you can change opacity of the clip, threshold and radius.

You should reduce Opacity until you are satisfied with the result. Then, you can use the box next to Smart Denoise in order to see the scene before and after noise and grain removal.

So, that’s it! – We learned how to remove/reduce noise and grain from the videos, using several video editors. So you might as well start making your video clips look better right away!

Noise that appears as unwanted grain or artifacts in the video image can be removed in Final Cut Pro pretty easily, you just have to follow the little steps for it. Keep in mind that Final Cut Pro is not eligible for PC, this editor is only available for Mac (but Windows users, tune in for the editors functioning on PC’s!)

So, you have your grained footage, which you already chose to denoise, and for which you will need a video reduction effect.

First, you will need to open Final Cut Pro and import abovementioned video. Select this clip in the timeline,

and position the play head in a way that the clip appears in the viewer, that is, on the big screen - for you to see well.

Click the Effects button in the top-right corner of the timeline, or, to use the shortcut, press Command & 5.

In the Effects browser, select the Basics category in the list of Video effects on the left, then select the Noise Reduction effect. For 360° clips, select the 360° category, then select the 360° Noise Reduction effect.

And you will need to do one of the following:

Drag the effect to the timeline clip you want to apply it to, or double-click the effect thumbnail to apply the effect to the selected clip.

When the effect is applied, Final Cut Pro analyzes the clip for noise, so you might need to wait for a little while the process is complete and only then see the result.

Interesting tip you can remember is that if you are using several effects to your video clip, then adding Noise Reduction as the first effect would guarantee the best results for you. So, Mac users, you can start denoising your videos in Final Cut Pro now!

• Adobe After Effects

Adobe After Effects is a digital visual effects, motion graphics, and compositing application… Pretty intense, right? This very software has endless powers, and one of them is, you guessed correctly – denoising the video! So, how are we going to do that in this monster of the industry?

Sometimes what’s annoying about this kind of programs is that you need plugins, so let’s try to find a way to achieve our desired result without using anything external.

So, first of all (as in all cases!) import your video into After Effects. Then, you will need to find Effect in the menu, and find: Noise and Grain. There, you will choose Remove Grain and click on it.

On the left side of the program layout, the Effects Control will be opened. Now, you see viewing mode, where you need to change Preview to Final Output.

So, this will be the video with Preview checked:

Which will look like this when Final Output is checked:

Somewhat different and looking better, right?..

By the way, you can watch the whole process video here !

• Adobe Premiere Pro

Adobe Premiere Pro is one of the most and sophisticated video editor. So, of course, there is a way to reduce noise in this software as well, and this can be reached using effect called Median.

First of all, you add your footage to the Timeline in Premiere Pro and then go find the Effects Panel, where Median can be found. You need to drag and drop the Median effect to your video clip.

The next step is to make sure that adding the effect to the grainiest parts of the clip, which can be done using masks. So, in the Effects Control panel, you’ll need to select the mask shape for your clip – you can either choose rectangle, circle, or pen tool. With the latter you can move the Mask around the screen and resize it to cover the area.

And if you Change the Feather setting to 100, the effect will not have a very visible edge and some smoothness will cover for it.

You will need to repeat the process with more than one mask, if you would like to have covered all of the grainy area of your shot.

Lastly, you’ll need to adjust the effect settings to reduce the noise.

The Median effect doesn’t actually take away the graininess, it just blurs it. You’ll need to experiment with the Radius settings until you are happy with the result.

• DaVinci Resolve

When it comes to DaVinci Resolve, the process is somewhat different in the free version of it. So, first of all, off course, you add your footage into the timeline. Then,you are going to find the fusion tab underneath the timeline panel.

You will see MediaIn1 and MediaOut1, you click on MediaIn1, which will ensure the scene appears in the first viewer – and MediaOut1 by default is appearing in the second. So, now you stay on MediaIn1, hit shift+spacebar, and find the option which says: Remove Noise (RN) and then click Add, which adds the Remove Noise1 node. On the top right corner you will find Inspector, and if you click on it, you will see all the properties you can modify.

After going only into the second viewer, and in the top bar we can find channel icons. We open it and click on red, which makes the footage black and white for a while. Then, we go back to the Inspector, increase Softness Red and Detail Red.

This removes much grain from the red channel. Then we repeat the same for green, as well as for blue channel. Once you finish, you go to the same channel button in the bar and change it to “back to color”. So, the footage will have its colors back and you will see that it has become clearer, compared to the first viewer.

You can play around with the Chroma and Luma channels in the Inspector, if that is something you have ever had experience with!

• Movavi Video Editor

In Movavi Video Editor, it is pretty straightforward – unlike DaVinci Resolve, of course! So, getting to the point: the first thing you need to do is Entering the Edit Mode. In order to achieve it, you’ll need to click the Edit button next to the file you want to adjust or select Adjustments in the Tools tab.

After this, you will be able to select the Noise removal option, and then, move the Noise level slider to reflect the amount of noise you can see in the preview. The more noise you need to remove, the higher the Noise level, and vice versa.

When you’re finished removing the noise, click Apply, but in case you need to remove noise from several files, select Apply to all files, which ensures the same noise level will be applied on all your files there.

Lastly, of course, Wondershare Filmora X offers the same option as well. The steps are ase follows: You need to go to the Effects panel and type: “Smart Denoise”. Then, right-click on the video and choose Edit Properties.

This will make sure you go inside the Smart Denoise, where you can change opacity of the clip, threshold and radius.

You should reduce Opacity until you are satisfied with the result. Then, you can use the box next to Smart Denoise in order to see the scene before and after noise and grain removal.

So, that’s it! – We learned how to remove/reduce noise and grain from the videos, using several video editors. So you might as well start making your video clips look better right away!

Noise that appears as unwanted grain or artifacts in the video image can be removed in Final Cut Pro pretty easily, you just have to follow the little steps for it. Keep in mind that Final Cut Pro is not eligible for PC, this editor is only available for Mac (but Windows users, tune in for the editors functioning on PC’s!)

So, you have your grained footage, which you already chose to denoise, and for which you will need a video reduction effect.

First, you will need to open Final Cut Pro and import abovementioned video. Select this clip in the timeline,

and position the play head in a way that the clip appears in the viewer, that is, on the big screen - for you to see well.

Click the Effects button in the top-right corner of the timeline, or, to use the shortcut, press Command & 5.

In the Effects browser, select the Basics category in the list of Video effects on the left, then select the Noise Reduction effect. For 360° clips, select the 360° category, then select the 360° Noise Reduction effect.

And you will need to do one of the following:

Drag the effect to the timeline clip you want to apply it to, or double-click the effect thumbnail to apply the effect to the selected clip.

When the effect is applied, Final Cut Pro analyzes the clip for noise, so you might need to wait for a little while the process is complete and only then see the result.

Interesting tip you can remember is that if you are using several effects to your video clip, then adding Noise Reduction as the first effect would guarantee the best results for you. So, Mac users, you can start denoising your videos in Final Cut Pro now!

• Adobe After Effects

Adobe After Effects is a digital visual effects, motion graphics, and compositing application… Pretty intense, right? This very software has endless powers, and one of them is, you guessed correctly – denoising the video! So, how are we going to do that in this monster of the industry?

Sometimes what’s annoying about this kind of programs is that you need plugins, so let’s try to find a way to achieve our desired result without using anything external.

So, first of all (as in all cases!) import your video into After Effects. Then, you will need to find Effect in the menu, and find: Noise and Grain. There, you will choose Remove Grain and click on it.

On the left side of the program layout, the Effects Control will be opened. Now, you see viewing mode, where you need to change Preview to Final Output.

So, this will be the video with Preview checked:

Which will look like this when Final Output is checked:

Somewhat different and looking better, right?..

By the way, you can watch the whole process video here !

• Adobe Premiere Pro

Adobe Premiere Pro is one of the most and sophisticated video editor. So, of course, there is a way to reduce noise in this software as well, and this can be reached using effect called Median.

First of all, you add your footage to the Timeline in Premiere Pro and then go find the Effects Panel, where Median can be found. You need to drag and drop the Median effect to your video clip.

The next step is to make sure that adding the effect to the grainiest parts of the clip, which can be done using masks. So, in the Effects Control panel, you’ll need to select the mask shape for your clip – you can either choose rectangle, circle, or pen tool. With the latter you can move the Mask around the screen and resize it to cover the area.

And if you Change the Feather setting to 100, the effect will not have a very visible edge and some smoothness will cover for it.

You will need to repeat the process with more than one mask, if you would like to have covered all of the grainy area of your shot.

Lastly, you’ll need to adjust the effect settings to reduce the noise.

The Median effect doesn’t actually take away the graininess, it just blurs it. You’ll need to experiment with the Radius settings until you are happy with the result.

• DaVinci Resolve

When it comes to DaVinci Resolve, the process is somewhat different in the free version of it. So, first of all, off course, you add your footage into the timeline. Then,you are going to find the fusion tab underneath the timeline panel.

You will see MediaIn1 and MediaOut1, you click on MediaIn1, which will ensure the scene appears in the first viewer – and MediaOut1 by default is appearing in the second. So, now you stay on MediaIn1, hit shift+spacebar, and find the option which says: Remove Noise (RN) and then click Add, which adds the Remove Noise1 node. On the top right corner you will find Inspector, and if you click on it, you will see all the properties you can modify.

After going only into the second viewer, and in the top bar we can find channel icons. We open it and click on red, which makes the footage black and white for a while. Then, we go back to the Inspector, increase Softness Red and Detail Red.

This removes much grain from the red channel. Then we repeat the same for green, as well as for blue channel. Once you finish, you go to the same channel button in the bar and change it to “back to color”. So, the footage will have its colors back and you will see that it has become clearer, compared to the first viewer.

You can play around with the Chroma and Luma channels in the Inspector, if that is something you have ever had experience with!

• Movavi Video Editor

In Movavi Video Editor, it is pretty straightforward – unlike DaVinci Resolve, of course! So, getting to the point: the first thing you need to do is Entering the Edit Mode. In order to achieve it, you’ll need to click the Edit button next to the file you want to adjust or select Adjustments in the Tools tab.

After this, you will be able to select the Noise removal option, and then, move the Noise level slider to reflect the amount of noise you can see in the preview. The more noise you need to remove, the higher the Noise level, and vice versa.

When you’re finished removing the noise, click Apply, but in case you need to remove noise from several files, select Apply to all files, which ensures the same noise level will be applied on all your files there.

Lastly, of course, Wondershare Filmora X offers the same option as well. The steps are ase follows: You need to go to the Effects panel and type: “Smart Denoise”. Then, right-click on the video and choose Edit Properties.

This will make sure you go inside the Smart Denoise, where you can change opacity of the clip, threshold and radius.

You should reduce Opacity until you are satisfied with the result. Then, you can use the box next to Smart Denoise in order to see the scene before and after noise and grain removal.

So, that’s it! – We learned how to remove/reduce noise and grain from the videos, using several video editors. So you might as well start making your video clips look better right away!

How to Add Text Behind Objects in Video

Adding text behind objects in your videos can be a great way to start your videos. For example, you can do so to create an attractive intro or startup a video. So, if you hope to make a video like a pro, let’s learn how to add text behind objects in your videos by Filmora.

Part 1. What Are The Benefits of Adding Text Behind Objects in Videos?

Your videos must maintain quality to create content worthy of a huge audience. You may have a YouTube channel or be starting down the road. Then you must give this a try because

Give a cool look

Adding text behind an object in a video looks cool! Now, your object could be a silhouette of a person or a huge skyscraper. You can add a text tile behind the object, creating the illusion. Due to this, the text will be flying in real-time.

Show creativity

Blasting your channel with innovative and creative content is the key to building a big audience. But, of course, you can always opt for many ways to create a video showing your creativity. One of those ways is to add text behind your object.

You can create an attractive intro by adding text behind objects that captivate the viewer. It ensures that your subscribers stay tuned to your channel and your content.

Build up a solid audience

Every day can be a real struggle if you are a daily content creator on YouTube. The audience demands good content. But your daily videos can get boring if you do not use new methods to edit your videos.

You can add text behind videos to spice up your intros and hook your daily audience even more. That will show the audience that you are genuinely putting in the effort.

Part 2. What Will You Need To Add Text Behind Videos?

Now there are a few things that you will need to add text behind videos. First, take a look at the basic priorities to perform this feature.

1. A Static Object Video

Adding text behind an object can be tricky if the object isn’t static. For example, the effect will be ruined if an object moves around a lot in a video.

Our goal is to create a smooth text behind the video effect. And this can only be achieved if the target object remains static in the video and does not move about its position.

2. A Video Editing Software - Wondershare Filmora

Once you select a video source, you aim to add it to a video editor. For this purpose, Wondershare Filmora would be your best choice. Wondershare Filmora allows you to create innovative and attractive videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

It has a very engaging system UI, allowing even beginner users to get their hands on it instantly. You will learn how to add text behind your videos with a few simple steps.

Now that you know the requirements for the video, let’s move on to the step-by-step guide to add text to your video.

Part 3. Step-by-Step Guide To Add Text Behind Videos

We look at two examples of how to add text behind videos in Wondershare Filmora.

• A static video with an object that can be easily masked out.
• A video with high contrast and a clean background.

Add Text behind a Static Video

First, we will go with adding text behind a static object. For this, scroll more to get the step-by-step process.

Step1 Download Wondershare Filmora

If you are a beginner just starting in the video editing business, Wondershare Filmora is the best choice. Follow the steps below to download the free version of Wondershare Filmora:

• First, download the Wondershare Filmora on your PC or Mac.
• Open the setup and install the Wondershare Filmora.

After downloading the Wondershare Filmora software, let’s edit the video. Scroll below to learn how to start the editing process!

Step2 Add the Video to the Timeline

We will first look at the static video example. For this, follow the below instructions:

• You have to start by importing your video in the import library.
• From the import library, you can click on the video and drag it down below to the timeline.

Note: Adding video to the timelines will allow you to create a workspace to edit your video.

Now let’s move on to how we will add the text tile to our video.

Step3 Add the Text Tile

It is time to add the text tile you will animate behind the object. To do that, follow the steps mentioned as such.:

• Go to the Titles icon on the bar above the import library.
• A drop-down option will be available on the left side.
• Scroll down to the Plain text.
• Here, you can see many text tiles to add to your video.
• You can choose anyone you like.
• The most commonly used tile is the Basic 6.
• When you add the text tile to the timeline, you must ensure that the text is of equal length to the video.
• To do that, drag the right corner of the text tile and drag it to the right to match the length of the video.

Step4 Edit the Text Tile

After you have added the text tile you desire, you need to type in the text. For this article, we will keep it simple. We will be typing a simple statement such as “Hello, World.“

• Double-click the Text tile to open the settings menu.
• After the settings menu is opened, type in the text box on the import window.

You will notice changes on the main window that your text has changed.

• After the text appears, you can make the font look as desired.
• Look above the text window, and you will see the type of text font selected.
• Click on the drop-down option and choose whatever you like.

Let’s move on to animate the text tile.

Step5 Animate the text tile

After adding text, it is time to animate it. This animation will decide how your text will appear behind the target object.

• First, you must open the text settings by double-clicking on the text tile in the timeline.
• In the settings opened in the import window, you will have to click on the animation tab in the upper left corner, aside from the Preset
• Now scroll down to where you will see the Right Roll
• Click on Right Roll and then click on the OK in the bottom right corner of the import window.

Note: You may notice now that the text appears in front of our object. Don’t worry now! We are getting there. With a few simple steps, we will see the results.

Now let us move on to the more significant part of the editing, masking the object. Again, look ahead to see how you can mask the object!

Step6 Mask the Object

To mask our object, we will need to be technical. We will begin by adding the same footage of the static object on our timeline. Follow the steps mentioned below:

• Drag and drop the static object footage above the timeline text. Make sure the text stays in the middle of the sandwich.

• We will hide the video in the first track to simplify things. In addition, this will make our editing easier.
• We will have to look in the effects library to insert the masking effect.
• You can see the Effects icon on the bar at the top.
• Click on the Effects.
• You will see the search bar at the top of the import window.
• In the search bar, type in Image mask.
• Drag the Image mask effect on the video above the text tile.

Now the masking effect has been added. But we would have to adjust so that it stays upon our object.

• Double-click on the video and the settings option will open up.
• Go into the Effects

Note: You must select your target object’s mask shape exactly as its shape.

• We have to mask out a building, so that we will need a vertical rectangle.

• After you have selected the shape of your object, we will need to convert it to the object’s size so that it only masks the building.
• To do that, scroll down below the import window to the settings.
• Here you can see the X, Y, and width settings.
• First, move the width bar so that it matches the width of the building.

• Now drag the X bar until the mask is confined to the building. You would have created the mask only limited to the building.

• Once you complete this step, click OK in the bottom right corner.
• Now un-hide the original video that you imported in the beginning.

Finally, play the video in the main play window from the beginning.

You have successfully created a text behind the object effect. Now that you know how to add text behind static objects let us move to learn how to add text to a video that has high contrast and a clean background.

Add text behind a high contrast and clean background

Besides the text can be added behind a static object, it can also be added to a clean background with high contrast. But how is it? Let’s dive into it.

Step1 Import the video into the timeline

• Import the video from the location in your PC media.
• When imported, drag and drop it onto the timeline.

Step2 Add the text tile

To add the text to your video, follow the steps mentioned below.

• Click on the titles icon on the bar above the import window.
• On the left drop-down option, scroll down to the titles.
• Select the Plain text option.
• You will notice that multiple options will pop up in the import window.
• Select the text title that suits you best.
• After you have selected the text style, drag and drop it down above your video in the timeline.

• Our next step would be to add the text.
• Double-click on the text tile. Doing so will open the settings menu in the import window.
• Type in the text that you want. For reference, we will keep it simple such as, “Hello world.”
• You can also adjust the font of your text.
• Above the type box, a drop-down option will show you the range of fonts available.
• Select the font you desire.

Now that you have added the text, it is time to animate it.

Step3 Take a snapshot

After typing in the text, you will notice in the main play window that your text still appears in front of your object. Therefore, we want to take it behind the object. To do so, first, you will need to take a snapshot.

Follow the steps mentioned to take a snapshot:

• Hide the main video. You can see the Eye icon aside from your main video in the edit column on the left side of the timeline.
• Click on the Eye icon to hide the main video.
• In the main play window, you will notice that the screen turns black, which leaves only the text on the screen.

• In the main play screen, you can notice a small camera icon.
• This camera icon is used to take snapshots of your screen.
• Click on the camera icon to take a snapshot of your screen.
• Your snapshot will now be saved in the main import window.

Now that we have taken a snapshot, we will need to import it into the timeline. Scroll below for more.

Step4 Add the snapshot

After taking it, your goal is to import it into the timeline. To perform this action, perform the following steps:

• Before adding the snapshot to the timeline, we must delete the main text tile.
• Then drag and drop the snapshot from the import library into the timeline above the video.
• Make sure that the snapshot is aligned well with the length of the video.
• If it is longer than the video, drag it from the right to match the length of the video.
• If its length is smaller than the video, drag it to the right to increase its length.

After adding the snapshot, we will have to change its blending mode.

Step5 Change the blending of the snapshot

To create the effect of your text behind the video, you must alter the main text’s blending mode. In this case, it will be the snapshot we took.

Note: Changing the blending mode of the snapshot will allow it to blend with the transparent background and will create the effect of the text behind the object in the video.

Follow the steps mentioned below to change the blending of the snapshot:

• Double-click the snapshot.
• If you select the compositing tab, the blending options will pop up.
• From default, it would be set to Normal. Click on the Normal
• It will show a drop-down option.
• Scroll down below until you can see an option labeled Then click on Overlay.

• And press OK in the bottom right corner to confirm your changes.

The text can be blended with the background.

• Click on the Eye icon to un-hide the video from the timeline.
• Now play the video from the start from the main play screen to see the final changes.

Congratulations! The above steps allow you to add text behind objects in your videos.

Conclusion

Modern media is full of creative content. And if you are a content creator that wants to make it through the world of YouTube and video creating, you need to be the best. You can only be the best at what you do if you keep pushing the boundaries of your creativity.

Adding text behind objects could be the first step in making your intros shine with creativity and innovation. It allows you to maintain and build your viewing audience. The more the audience, the more your content gets watched!

Free Download For macOS 10.14 or later

It has a very engaging system UI, allowing even beginner users to get their hands on it instantly. You will learn how to add text behind your videos with a few simple steps.

Now that you know the requirements for the video, let’s move on to the step-by-step guide to add text to your video.

Part 3. Step-by-Step Guide To Add Text Behind Videos

We look at two examples of how to add text behind videos in Wondershare Filmora.

• A static video with an object that can be easily masked out.
• A video with high contrast and a clean background.

Add Text behind a Static Video

First, we will go with adding text behind a static object. For this, scroll more to get the step-by-step process.

Step1 Download Wondershare Filmora

If you are a beginner just starting in the video editing business, Wondershare Filmora is the best choice. Follow the steps below to download the free version of Wondershare Filmora:

• First, download the Wondershare Filmora on your PC or Mac.
• Open the setup and install the Wondershare Filmora.

After downloading the Wondershare Filmora software, let’s edit the video. Scroll below to learn how to start the editing process!

Step2 Add the Video to the Timeline

We will first look at the static video example. For this, follow the below instructions:

• You have to start by importing your video in the import library.
• From the import library, you can click on the video and drag it down below to the timeline.

Note: Adding video to the timelines will allow you to create a workspace to edit your video.

Now let’s move on to how we will add the text tile to our video.

Step3 Add the Text Tile

It is time to add the text tile you will animate behind the object. To do that, follow the steps mentioned as such.:

• Go to the Titles icon on the bar above the import library.
• A drop-down option will be available on the left side.
• Scroll down to the Plain text.
• Here, you can see many text tiles to add to your video.
• You can choose anyone you like.
• The most commonly used tile is the Basic 6.
• When you add the text tile to the timeline, you must ensure that the text is of equal length to the video.
• To do that, drag the right corner of the text tile and drag it to the right to match the length of the video.

Step4 Edit the Text Tile

After you have added the text tile you desire, you need to type in the text. For this article, we will keep it simple. We will be typing a simple statement such as “Hello, World.“

• Double-click the Text tile to open the settings menu.
• After the settings menu is opened, type in the text box on the import window.

You will notice changes on the main window that your text has changed.

• After the text appears, you can make the font look as desired.
• Look above the text window, and you will see the type of text font selected.
• Click on the drop-down option and choose whatever you like.

Let’s move on to animate the text tile.

Step5 Animate the text tile

After adding text, it is time to animate it. This animation will decide how your text will appear behind the target object.

• First, you must open the text settings by double-clicking on the text tile in the timeline.
• In the settings opened in the import window, you will have to click on the animation tab in the upper left corner, aside from the Preset
• Now scroll down to where you will see the Right Roll
• Click on Right Roll and then click on the OK in the bottom right corner of the import window.

Note: You may notice now that the text appears in front of our object. Don’t worry now! We are getting there. With a few simple steps, we will see the results.

Now let us move on to the more significant part of the editing, masking the object. Again, look ahead to see how you can mask the object!

Step6 Mask the Object

To mask our object, we will need to be technical. We will begin by adding the same footage of the static object on our timeline. Follow the steps mentioned below:

• Drag and drop the static object footage above the timeline text. Make sure the text stays in the middle of the sandwich.

• We will hide the video in the first track to simplify things. In addition, this will make our editing easier.
• We will have to look in the effects library to insert the masking effect.
• You can see the Effects icon on the bar at the top.
• Click on the Effects.
• You will see the search bar at the top of the import window.
• In the search bar, type in Image mask.
• Drag the Image mask effect on the video above the text tile.

Now the masking effect has been added. But we would have to adjust so that it stays upon our object.

• Double-click on the video and the settings option will open up.
• Go into the Effects

Note: You must select your target object’s mask shape exactly as its shape.

• We have to mask out a building, so that we will need a vertical rectangle.

• After you have selected the shape of your object, we will need to convert it to the object’s size so that it only masks the building.
• To do that, scroll down below the import window to the settings.
• Here you can see the X, Y, and width settings.
• First, move the width bar so that it matches the width of the building.

• Now drag the X bar until the mask is confined to the building. You would have created the mask only limited to the building.

• Once you complete this step, click OK in the bottom right corner.
• Now un-hide the original video that you imported in the beginning.

Finally, play the video in the main play window from the beginning.

You have successfully created a text behind the object effect. Now that you know how to add text behind static objects let us move to learn how to add text to a video that has high contrast and a clean background.

Add text behind a high contrast and clean background

Besides the text can be added behind a static object, it can also be added to a clean background with high contrast. But how is it? Let’s dive into it.

Step1 Import the video into the timeline

• Import the video from the location in your PC media.
• When imported, drag and drop it onto the timeline.

Step2 Add the text tile

To add the text to your video, follow the steps mentioned below.

• Click on the titles icon on the bar above the import window.
• On the left drop-down option, scroll down to the titles.
• Select the Plain text option.
• You will notice that multiple options will pop up in the import window.
• Select the text title that suits you best.
• After you have selected the text style, drag and drop it down above your video in the timeline.

• Our next step would be to add the text.
• Double-click on the text tile. Doing so will open the settings menu in the import window.
• Type in the text that you want. For reference, we will keep it simple such as, “Hello world.”
• You can also adjust the font of your text.
• Above the type box, a drop-down option will show you the range of fonts available.
• Select the font you desire.

Now that you have added the text, it is time to animate it.

Step3 Take a snapshot

After typing in the text, you will notice in the main play window that your text still appears in front of your object. Therefore, we want to take it behind the object. To do so, first, you will need to take a snapshot.

Follow the steps mentioned to take a snapshot:

• Hide the main video. You can see the Eye icon aside from your main video in the edit column on the left side of the timeline.
• Click on the Eye icon to hide the main video.
• In the main play window, you will notice that the screen turns black, which leaves only the text on the screen.

• In the main play screen, you can notice a small camera icon.
• This camera icon is used to take snapshots of your screen.
• Click on the camera icon to take a snapshot of your screen.
• Your snapshot will now be saved in the main import window.

Now that we have taken a snapshot, we will need to import it into the timeline. Scroll below for more.

Step4 Add the snapshot

After taking it, your goal is to import it into the timeline. To perform this action, perform the following steps:

• Before adding the snapshot to the timeline, we must delete the main text tile.
• Then drag and drop the snapshot from the import library into the timeline above the video.
• Make sure that the snapshot is aligned well with the length of the video.
• If it is longer than the video, drag it from the right to match the length of the video.
• If its length is smaller than the video, drag it to the right to increase its length.

After adding the snapshot, we will have to change its blending mode.

Step5 Change the blending of the snapshot

To create the effect of your text behind the video, you must alter the main text’s blending mode. In this case, it will be the snapshot we took.

Note: Changing the blending mode of the snapshot will allow it to blend with the transparent background and will create the effect of the text behind the object in the video.

Follow the steps mentioned below to change the blending of the snapshot:

• Double-click the snapshot.
• If you select the compositing tab, the blending options will pop up.
• From default, it would be set to Normal. Click on the Normal
• It will show a drop-down option.
• Scroll down below until you can see an option labeled Then click on Overlay.

• And press OK in the bottom right corner to confirm your changes.

The text can be blended with the background.

• Click on the Eye icon to un-hide the video from the timeline.
• Now play the video from the start from the main play screen to see the final changes.

Congratulations! The above steps allow you to add text behind objects in your videos.

Conclusion

Modern media is full of creative content. And if you are a content creator that wants to make it through the world of YouTube and video creating, you need to be the best. You can only be the best at what you do if you keep pushing the boundaries of your creativity.

Adding text behind objects could be the first step in making your intros shine with creativity and innovation. It allows you to maintain and build your viewing audience. The more the audience, the more your content gets watched!

Create True 3D Text Effects Using After Effects

Every video creator wants to make their videos eye-catching and get the message delivered to the viewers properly. If you have regular graphic elements and texts, your video is not going to be as engaging as expected. That is why video creators always try to include trending and attention-grabbing effects and animations in the video. There is no doubt that 3D animations for texts and titles look really amazing.

Different video editors have different 3D text animations and effects that you can apply to the text on your video and get instantly noticed by your viewers. You can apply 3D text animation on premium video editors like After Effects as well as apply 3D text effect online. We will illustrate how to create stunning 3D text animations with different video editors in simple steps.

Part 1. Create True 3D Text Effects using After Effects

After Effects is a premium video editor where you can create true 3D text effect from scratch. First of all, you need to create a new composition and add your text to your video. You have to enable 3D option for the text and add depth and lighting texture to get 3D effect. Therefore, you should first create 3D text effect and thereafter, animate 3D text as per your preference. Here are the steps to create 3D text After Effects easily.

Step1Launch After Effects and click on New Composition from Project section. Set the different parameters on Composition Settings and click on Ok button.

Step2Click on Type Text icon located at the top bar and type a text on the video. After typing the text, go to the Character panel to the right and adjust the style of the text.

Step3You have to enable 3D option for the text from the 3D icon on text layer. Under text layer, click on Transform and use X-Y-Z rotation options to rotate the text from 3D perspectives.

Step4Similarly, click on Geometry Options and add depth to your text to get 3D effect on your text.

Step5You have to create a new Camera layer by right-clicking Timeline and go to New>Camera option. You will get Camera Settings window to adjust the parameters and click on Ok button.

Step6Use the Orbit Tool to rotate the text to get the true 3D effect visible on the screen.

Step7You need to get the lighting and shading for your 3D text. Right-click on Comp window and go to New> Light. Adjust the parameters from Light Settings window.

Step8You can adjust Transform and Light Options from Comp window under Light layer for better effect.

You have successfully created 3D text effect on After Effects. You will now illustrate how to animate the 3D text.

Part 2. Create 3D Camera Animation

You have prepared your text with 3D effect, and you can have multiple 3D texts on your video. It is time to animate those 3D texts so that the 3D effect becomes more prominent and the text instantly grabs attention. You do not have to create animation from scratch as there are 3D animation presets available. All you need to do is apply them to your 3D texts and they will start to animate automatically. Besides, you can create 3D camera animation to show the texts from different camera perspectives. Here are the steps to use 3d animated text generator on After Effects.

Step1Once you have created your 3D text effect, go to Effects & Presets panel.

Step2Go to Text> 3D Text and you will see all the different 3D animation presets that you can apply.

Step3Drag and drop your desired 3D animation directly to 3D text layer.

Step4If you want camera animation on your 3D text, select the Camera layer you already created. Press C to get the Orbit tool to get the starting position of the 3D text. You can also use Dolly tool and Pan & Zoom tool for adjustment.

Step5Now add a keyframe on Position option from Transform option to mark the starting point of the animation. Similarly, add another keyframe where you want the animation to end.

Step6Use the Orbit tool, Dolly tool and others to position 3D text as per how you want the animation to end.

Part 3. Make Stunning 3D Text Effects Online

Since adding 3D effects to text is a rather heavy task in video editing, there are many who think that you cannot add 3D text effects without a dedicated video editor application. But there are many renowned online video editors available where you can create amazing 3D text effects and animations with a few clicks.

In fact, you can use 3d animated text generator online to get any desired text in 3D mode. We recommend FlexClip full-featured video editor for 3D text animation online. You can select from available 3D text templates and apply different motion animations. Here are the steps to follow.

Step1Open your web browser and “flexclip.com/editor/app”. Go to Media tab and import your video and add it to the Timeline.

Step2Go to Text and click on See All for Text Styles. Scroll down and check out the 3D text templates available. Click on any desired template to apply to your video.

Step3Double-Click on 3D text present on Viewer and edit the style and text as per your preference.

Step4Click on three-dot icon at the top of Viewer and click on Motion option.

Step5Select any desired motion effect and you will see your 3D text animation on Viewer when you play the video.

Part 4. Alternative Way to Create 3D Text Animation

When you use an online video editor to create 3D text animation, there will have limited 3D text effects. We can use After Effects to create 3D text animations from scratch. But you may find the steps slightly complicated and we recommend Filmora as the best alternative way to create 3D text animation. Filmora is a premium video editor that is equally popular among amateurs and professionals. Here are the steps to create 3D text animations using Filmora in simple steps.

Step1Download and install Filmora on your computer. The video editor is available for Windows and Mac users. Click on New Project button on welcome screen or go to File> New Project option.

Step2Go to File> Import Media > Import Media Files to import the video file. Alternatively, drag and drop the video file directly into Project Media folder. Put the video file into Timeline to get started.

Step3Go to Titles tab and go to left panel, click on Titles option. Search “3D” in the search field and check out all 3d text effects and animations available.

Step4Drag and drop 3D text templates on Timeline. You should place the effect on the Timeline where you want it to appear on the video. You can also adjust the duration of the effect as per your requirements.

Step5Double-click on the text layer to customize the text and style. Play the video and click on Export button to save the edited 3D text video.

Conclusion

There is no doubt that if you include 3D text effects and animations in your video, your video will definitely stand out. The viewers will find the video engaging and understand the message that the video creator wants to get across. We have illustrated how to make stunning 3D text animations. You can also use 3d text generator online. But we recommend Filmora as the best and the easiest video editor to create 3D text animations instantly.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Also read: