An Ultimate Guide to Edit a Music Video: Aspect Ratio and First Cut

Are you planning to edit your music video? Do you need on out how to edit your first music video draft? Editing a music video is a creative task but can be challenging.

One of the key elements of this process is selecting the aspect ratio and making the first cut. In this blog, we will explore these steps in detail, providing important tips and tricks. Whether you’re a beginner or an experienced editor, get ready to take your music video to the next level. Let’s get started.

Which software will you need?

As we have a lot of software in the market, we must select the right software for high-quality editing. Wondershare Filmora is an amazing video editing software. It offers a ton of video editing tools. You can add special effects, transitions, and more to make your music video captivating.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

Free Download For macOS 10.14 or later

Note: Before you start editing your project, make sure that you have a backup. You can copy the project to an external USB or hard drive for a backup.

Adjust the aspect ratio

The aspect ratio is known as the size of the video frame. For example, the most common aspect ratios are 16:9 and 4:3. The first number represents the width, and the second represents the height.

You should always ask your cinematographer about the aspect ratio. There are chances when cameras won’t shoot at the intended aspect ratio they were framed for. In that case, you’ll need to crop or letterbox them when editing.

How to find the width/height of the frame?

Most of the frames that are being shot on the camera are 3424 pixels wide, which is a little under 4k. If you have a measurement of one side of the frame, you can find the other by using some math. Let’s suppose your frame is 3424 pixels wide. You can use this formula to find the height.

Formula: 3424 pixels wide x 1 high / 2.35 wide (or whatever your aspect ratio)

Now you can cancel out the width from the multiplier and the denominator.

= 3424 pixels wide x 1 high / 2.35 wide

Now you are left with the equation:

= 3424 pixels high / 2.35

After solving this equation, you will get the answer which is: 1457 pixels high. Let’s adjust it on the music video as well, follow the steps given below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step1Open the aspect ratio setting tab

Open your music video project in Filmora and click on the screen icon, as shown in the picture.

Then select the Change Project Aspect Ratio.

Step2Add values

Now set the project Width to 3424 pixels and its Height to 1457 pixels. You can also adjust the frame rate by selecting the one in which you shot the video. Then click OK.

Assembly

The next step is assembly. You will arrange the shots, clips, and elements in this process and get everything in order. It can be daunting and inspiring for you, as it’s a blank canvas you are going to start with. Before editing, you can also get some guidance from your art director.

If your music video has shots of the band performing, drop them off first and sync them with the audio. On the contrary, if you are doing a narrative style, you can arrange the shots according to the story you want to portray.

Step1Drop the media

You can start by dragging and dropping the music onto the audio timeline. Then you can add the shots of your music video.

Step2Arrange the shots

Arrange the shots according to the storyboard you created and sync them with the audio.

Step3Add the title

Once you arrange all shots in order, you can add the title of your music video. Click on the Titles, then choose your desired style and add the name of your music video in the title box. You can also change the text’s size, font, and color.

Step4Flip the clip

One last thing is, if you shot any scene in mirror-image format, you can flip it. Click on the clip you want to flip and select the flip icon in the video properties.

Send your first draft

The first draft is the video in which you added audio and re-ordered the shots. You decided on the pace and flow of the video to create a basic structure. You made changes to make it interesting and captivating.

Before you put too much effort into editing your video, send it to your director, producer, or client for review. It will help ensure that any big changes can be made before you invest too much time in the edit.

For first drafts, you don’t need anything fancy. A lower-resolution and more compressed file can make sending it to a director or client much easier. You can also add a timer on the music video, so the person reviewing it can give you accurate timing on where he wants any revision.

How to add the timer in the music video?

1. Click on Effects and search for Timecode in the search bar.
2. Choose the timer style you like and drop it onto the new timeline.
3. Extend the timer to the end of the video.
4. Adjust the position and add the duration of your music video.

Now you are all set to export the first draft of your music video. You can also adjust the video format on the export option, but MP4 is recommended.

Conclusion

We hope this blog has helped you edit the initials of your music video. By adjusting the aspect ratio to fit the desired screen size and properly planning the first cut, you can lay a solid foundation for the rest of the editing process.

These two steps can greatly impact the overall look and feel of the final product. Remember to communicate with your director, producer, or client throughout the process to ensure that the final product meets their expectations.

IMovie Review – Is It The Best Video Editor for Mac Users?

If you are a Mac user and you are getting started in video editing, it is better if you start with a free video editing software. There is no need to download any external free video editor when you are a Mac user. This is because Mac comes with a pre-installed free video editor called iMovie editor. iMovie is a video editing app from Apple where you will get all the standard and some advanced features.

iMovie is extremely popular among Mac users for video editing because it is completely free and easy to use. In fact, iMovie is also available for iPhone and iPad users. You can start your video editing on your iPhone and transfer the same work to Mac to continue editing on your Mac. But the most important question is if iMovie editor is the best video editor for Mac users. Read our iMovie review and find out a better alternative.

Part 1. Key Features of iMovie

Even iMovie is completely free to use, it competes with several premium video editors in terms of features. There are only a handful of free video editors available that lets you edit 4K videos, and iMovie is one of them. Similarly, there are only a few premium video editors available that support editing the same video project on different devices like iMovie. Here are all the key features of iMovie that you should know.

Templates and Themes – iMovie comes with different templates and themes for creating different types of videos including cinematic videos. There are classy and trending themes available to create trailers and short films. These themes and templates have limited customization options so that you can adjust as per your requirements.

Basic Editing – iMovie lets you combine video clips, split a large video file, trim video parts, crop and rotate video. Besides, you get to zoom videos as well as resize them as you need. You can add texts and titles as well as apply different transitions wherever you want to.

Advanced Editing – You can change speed and turn your video clips into slow-motion videos. You can correct the color as well as stabilize them. Besides, you can apply green screen effect and split screen effect. Moreover, you can reverse video as well as put overlays on videos. iMovie is also capable of recording video and audio if you want to record your screen or webcam video.

Audio Editing – iMovie lets you edit audio as well which is an essential requirement in video editing. You can increase and decrease volume, change speed and add beat markers to a video if required. Coming to audio effects, you can apply fade-in and fade-out effects. You can mute the audio in your recorded video and add a background music instead. Moreover, you can add voiceover and choose royalty-free audio clips.

Transitions and Effects – Even though there are limited visual effects, there are unique and eye-catchy. iMovie keeps on adding new and trending effects with every update so that the users have enough options to make their videos stand out. iMovie also provides different backgrounds that you can use on your video to enhance its quality. Apart from visual effects, there are several standard audio effects available.

User Interface – iMovie comes with a simple and intuitive user interface that lets everyone edit videos instantly without prior experience. This is exactly why some users never go for premium video editors. The user interface is clean, and all options are readily available. You can upload media files on Media Library, and they are automatically categorized from where you can access them instantly.

Part 2. How to Edit Videos with iMovie?

iMovie comes pre-installed on Mac, and hence, there is no need to download and install the application. Coming to how to use iMovie, there are three types of projects you can choose on iMovie. They are Media, Projects, and Theater. Media is where your footages reside, Projects represent the main workspace, and Theater is where your finished projects reside. Here are the steps regarding iMovie edit video.

Step 1: Open iMovie and click on Projects. You will see two options Movie and Trailer. Click on Movie to edit your videos.

Step 2: Click on My Movie under Project Media and go to My Media. Import your video clips and audio files under My Media.

Step 3: Drag and drop the video clips and audio clips on the timeline in proper order. You can go for iMovie edit audio and video such as trimming as required.

Step 4: Go to Transitions located at the top bar beside My Media and place the desired transitions in between the video clips.

Step 5: Similarly, go to Titles located at the top bar beside Transitions and place them on the timeline wherever appropriate.

Step 6: Finally, check your edited video on the canvas and then go to the top-right corner and click on Export. You will have to option to save it in Theater and share on social media as well as through email and iTunes.

Part 3. Alternative to Edit Videos - Filmora

In spite of iMovie being a good video editor, Mac users search for a better alternative. This is because there are limited transitions and effects available. You can have two video tracks only on the timeline and there is lack of customization. Besides, the advanced features of video editing such as motion tracking are not available. Moreover, there are limited file formats supported for importing and exporting.

Wondershare Filmora is the best alternative to iMovie for Mac users. Filmora is a premium video editor where all the shortcomings of iMovie are taken care of. Filmora supports almost all file formats for media files. There is a wide range of transitions, effects, elements as well as animations available. Besides, there are different styles of texts and titles available along with stock media library. Here are the steps to edit videos with iMovie.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Filmora on your Mac. Launch Filmora and click on New Project.

Step 2: Drag and drop your video clips and audio files Project Media folder. Drag and place the video clips on the timeline and arrange per perfectly. Place audio files on the timeline on a different track.

Step 3: If you want to apply transitions, go to Transitions at the top bar and drag any transition in between video clips on the timeline. You can also insert texts from Titles and objects from Elements from the top bar.

Step 4: Play the video to see the changes you have made, and click on Export button to save the video when you are satisfied.

Part 4. FAQs about iMovie

Is iMovie good for video editing?

Yes, iMovie is good for basic video editing. You can edit 4K videos, and iMovie is available on macOS and iOS. If you are a beginner, iMovie is perfect for you. If you want advanced editing features, we recommend Wondershare Filmora.

What’s better Premiere Pro or iMovie?

In terms of features and functionalities, Premiere Pro is far better than iMovie. However, Premiere Pro is more for advanced video editing while iMovie is more for beginners. iMovie is simpler to use than Premiere Pro, and hence, beginners will love it.

Can I make YouTube videos with iMovie?

Yes, you can make YouTube videos with iMovie as it has all the required tools and options. Import your video clips and audio files on the timeline, go for iMovie edit clip like trim and crop as required, add transitions, texts, and effects as applicable and publish your finished video on YouTube.

Try It Free

For macOS 10.12 or later

Step 1: Download and install Filmora on your Mac. Launch Filmora and click on New Project.

Step 2: Drag and drop your video clips and audio files Project Media folder. Drag and place the video clips on the timeline and arrange per perfectly. Place audio files on the timeline on a different track.

Step 3: If you want to apply transitions, go to Transitions at the top bar and drag any transition in between video clips on the timeline. You can also insert texts from Titles and objects from Elements from the top bar.

Step 4: Play the video to see the changes you have made, and click on Export button to save the video when you are satisfied.

Part 4. FAQs about iMovie

Is iMovie good for video editing?

Yes, iMovie is good for basic video editing. You can edit 4K videos, and iMovie is available on macOS and iOS. If you are a beginner, iMovie is perfect for you. If you want advanced editing features, we recommend Wondershare Filmora.

What’s better Premiere Pro or iMovie?

In terms of features and functionalities, Premiere Pro is far better than iMovie. However, Premiere Pro is more for advanced video editing while iMovie is more for beginners. iMovie is simpler to use than Premiere Pro, and hence, beginners will love it.

Can I make YouTube videos with iMovie?

Yes, you can make YouTube videos with iMovie as it has all the required tools and options. Import your video clips and audio files on the timeline, go for iMovie edit clip like trim and crop as required, add transitions, texts, and effects as applicable and publish your finished video on YouTube.

Try It Free

For macOS 10.12 or later

Step 1: Download and install Filmora on your Mac. Launch Filmora and click on New Project.

Step 2: Drag and drop your video clips and audio files Project Media folder. Drag and place the video clips on the timeline and arrange per perfectly. Place audio files on the timeline on a different track.

Step 3: If you want to apply transitions, go to Transitions at the top bar and drag any transition in between video clips on the timeline. You can also insert texts from Titles and objects from Elements from the top bar.

Step 4: Play the video to see the changes you have made, and click on Export button to save the video when you are satisfied.

Part 4. FAQs about iMovie

Is iMovie good for video editing?

Yes, iMovie is good for basic video editing. You can edit 4K videos, and iMovie is available on macOS and iOS. If you are a beginner, iMovie is perfect for you. If you want advanced editing features, we recommend Wondershare Filmora.

What’s better Premiere Pro or iMovie?

In terms of features and functionalities, Premiere Pro is far better than iMovie. However, Premiere Pro is more for advanced video editing while iMovie is more for beginners. iMovie is simpler to use than Premiere Pro, and hence, beginners will love it.

Can I make YouTube videos with iMovie?

Yes, you can make YouTube videos with iMovie as it has all the required tools and options. Import your video clips and audio files on the timeline, go for iMovie edit clip like trim and crop as required, add transitions, texts, and effects as applicable and publish your finished video on YouTube.

Try It Free

For macOS 10.12 or later

Step 1: Download and install Filmora on your Mac. Launch Filmora and click on New Project.

Step 2: Drag and drop your video clips and audio files Project Media folder. Drag and place the video clips on the timeline and arrange per perfectly. Place audio files on the timeline on a different track.

Step 3: If you want to apply transitions, go to Transitions at the top bar and drag any transition in between video clips on the timeline. You can also insert texts from Titles and objects from Elements from the top bar.

Step 4: Play the video to see the changes you have made, and click on Export button to save the video when you are satisfied.

Part 4. FAQs about iMovie

Is iMovie good for video editing?

Yes, iMovie is good for basic video editing. You can edit 4K videos, and iMovie is available on macOS and iOS. If you are a beginner, iMovie is perfect for you. If you want advanced editing features, we recommend Wondershare Filmora.

What’s better Premiere Pro or iMovie?

In terms of features and functionalities, Premiere Pro is far better than iMovie. However, Premiere Pro is more for advanced video editing while iMovie is more for beginners. iMovie is simpler to use than Premiere Pro, and hence, beginners will love it.

Can I make YouTube videos with iMovie?

Yes, you can make YouTube videos with iMovie as it has all the required tools and options. Import your video clips and audio files on the timeline, go for iMovie edit clip like trim and crop as required, add transitions, texts, and effects as applicable and publish your finished video on YouTube.

How to Use Lumetri Color in After Effects

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

Try It Free Try It Free

When going forth with film post-production, video game creation, and television production, almost every video editor’s goal is to produce outstanding results. Usually, this cannot be achieved by using mediocre tools. One of the top-notch software video editors need to use is Adobe After Effect. Adobe After Effect is a motion graphics, digital visual effect, and compositing application developed by the Adobe system.

Adobe After Effects has tons of tools, and an exceptional one is a Lumetri color. With this functionality, you can easily carry out your color correction and color grading. Read this article and get to the bottom line on how to use Lumetri Color in Adobe After Effects.

Let’s dig in!

In this article

01 Does After Effects have Lumetri Color?

02 How to use Lumetri Color in Adobe After Effects

03 Is there a simple way to Unionise the Color of my Video?

Does After Effects have Lumetri Color?

Yes, there is lumetri color in After Effects. Lumetri Color allows you to adjust contrast, light, and color to your video based on your preference. With After Effects, you can carry out various color customizations in the Lumerti panel without exiting your current project.

Furthermore, the Lumetri color panel in Adobe After Effects allows you to export your settings to another different premiere pro project wholly. Usually, the file is exported as a .cube file – This relieves you from the wearisomeness of creating new grading features.

How to use Lumetri Color in Adobe After Effects

You don’t need to be a pro for you to use Lumetri Color in Adobe After Effects. The color workspace in Adobe After Effect is designed to be straightforward and user-friendly.

The Lumetri Color panel in Adobe contains the histogram, vectorscope, parade scope, and waveform monitor. The histogram, parade scope, and waveform monitor display image intensity, whereas the vectorscope display hue and color saturation.

Lumetri Color is considered an ultimate choice by most editors due to its wide range of functionalities. Some of the functionalities in the Lumetri panel include:

1. Vignettes

Vignette is an outstanding feature that effortlessly allows Lumetri users to adjust lightness and darkness using sliders.

Vignettes allow you to darken the borders and highlight certain parts. You will therefore create more emphasis on highlighted parts in your clip.

2. HSL Secondary

When you want to get exceptional footage controls, HSL Secondary (Hue, Saturation, and Luminance) is often the best functionality. HSL Secondary easily separates your footage and works on a selected piece.

With the functionality, you can easily manipulate the skin tones in your footage and refocus images.

3. Curves

The Lumetri panel in Adobe After Effects renders its users the curves functionality. There are two curves in the Lumetri Panel, i.e., Hue Saturation curves and luminesce curves.

The Hue/Saturation curve uses the red, green, and blue (RBG) flagship, whereas the luminance curve helps manage the frame curve’s tone.

4. Fx Bypass

Fx Bypass is a new functionality feature in the Lumetri panel. It allows you to bypass and reset effects without switching to the controls panel.

How to use Lumetri Color

With your Adobe After Effects, you can make quick and advanced color changes to your clips. Here are the simple steps on how to use Lumetri Color.

Step 1. Add your footage to the timeline

First, open your Adobe After Effect and add your video file to the software. Drag and drop to add it to the timeline.

Step 2. Open Lumetri Color

Here, you highlight your video in the timeline, then head over to the “Window” menu. From the drop-down menu, select “Effects & presets” > “Lumetri Color.”

Alternatively, you can go to the “Effects” menu, which is at the left-hand side of your interface, then select “Color Correction”> “Lumetri Color.”

Step 3. Carry out your Color Grading and Saturation

With the “Lumetri Color” functionality, you can carry out various adjustable settings such as tone, hue, saturation and color grading.

To carry out saturation:

Click on the “ Hue/Saturation “ from the drop-down menu in “Lumetri Color.” You can change the color of the entire footage by adjusting the “Master Hue” from the Effects Control Panel.

Alternatively, you can opt to fine-tune the freshly selected color by using the “Master Saturation” and Master Lightness.”

To carry out color grading:

• After opening the “Lumetri Color” panel as in step 2 above, click on the eyedropper to select the curve you want to use.
• Click the color in your footage that you wish to adjust. Usually, when you use the eyedropper, three points will be added to the graph. The two bottom points restrict color selection to a minimum range, whereas the first represents your selected color.

How to Use Lumetri Scope

Besides the Lumetric Color, Lumetric Scope is another essential tool for post-film production in Adobe After Effects. The color correcting tool, Lumetric scope guarantees its users’ accurate results when used correctly.

When carrying out color corrections in films, it is advisable to use quality monitor calibrators and paint your workspace walls neutral grey. Usually, it reduces lighting distraction and the external color effect, respectively.

However, not every editor can meet all the required basics, and that is where Lumetri scope comes in. Lumetri Scope allows one to get the best color results in their videos. Here are the steps on how to use Lumetri Scope:

Step 1. Open Lumetric Scope

First, open your Adobe After Effect application and add your footage to the timeline. Go to the “ Window “ menu at the top-left-hand side of your interface.

In the drop-down menu, select “Lumetri Scopes” or “Workspaces,” then click on the “Color” option.

The Lumetri Scope tab will be displayed adjacent to the timeline footage.

Step 2. Evaluate Hue and Saturation using Vectorscope

In the Lumetri Scope tab, click on the wrench icon, and a drop-down menu will be displayed. From the menu, select “Vectorscope YUV” and read the saturation. When reading saturation, begin from the center going outwards.

Hue, on the other hand, is read in a circular direction.

Step 3. Evaluate the tonal values and Brightness using Histogram

The histogram in Lumetri Scope displays an image’s tonal values and brightness levels.

To measure the brightness and tonal values, go back to the Lumetri Scope panel and click on the wrench icon. Click on “Presets” from the drop-down menu and select “Histogram.”

The scale in the histogram starts from 0 (pure black) to 225 (pure white). You, therefore, need to view the number of pixels for every color horizontally when reading.

Step 4. Evaluate Color and Brightness Intensities using Waveform Monitor

The color and brightness are read from the bottom to the top in the waveform monitor.

Click on the wrench icon to view the intensities, then pick the “Presets” option > “Waveform RBG.” A drop-down menu (RGB, YC, Luma, and YC no Chroma) will be displayed that allows you to do the readings.

Reading the IRE scale is usually done in ascension (0 to 100).

Step 5. Evaluate the Individual color channels using Parade Scope

Here, click on the wrench icon in the Lumetri Scopes panel, then select the “Presets”> “Parade RGB.” Select from the alternate Lumetri scope combinations of RGB, RGB-White, YUV, YUV white.

Is there a simple way to Unionise the Color of my Video?

Have you tried color grading and color correction in Lumetri using Adobe After Effects, but your efforts are bearing no fruits? It would be best not to worry since there is a simple way out. So, Yes! There is a simple way to unionize the color of your video – it is by using Wondershare Filmora .

Wondershare Filmora is a professional application to edit videos with a wide range of tools that allows its users to create stunning videos with ease. From its simple and intuitive design to its wide range of functionalities and affordability, Filmora users have every reason to stick to the software.

Some of the functionality features that make Wondershare Filmora easy to use include:

Curve Section

Filmora has way simpler curves than Adobe After Effects. Filmora has two presets, i.e., One that creates an S-curve over the graph, and the other resets graph to a straight linear line. Usually, the S-curve represents soft contrasts.

YUV color correction

The YUV color correction feature in Filmora functions straightforwardly when compared to Adobe After Effects. The Y and V channels in Filmora stores color data, whereas the U channel carries the brightness data. Editors find it effortlessly using the YUV color correction in Filmora.

Hue and Saturation

Hue, saturation, and lightness levels in Wondershare Filmora are undeniably very easy to understand unline other premiere software applications.

In Filmora, the Hue shift plays an essential role in shuffling the colors, whereas the Saturation defines the overall intensity of colors in an image.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● With the above illustrations, you need not find it challenging to use Lumetri Color in Adobe After Effect. But if you are getting your head stuck when using Adobe After Effects, you need not stress out. There is an ultimate solution, and that is Wondershare Filmora. Incorporate this easy-to-use and pocket-friendly software in your edits. Besides, you will not have to go through the user guide to get started.

3GP Video Format: What Is 3GP Format And How To Play It?

Everyone uses the internet nowadays as it is a necessary part of our lives. We exchange multimedia files and texts messages on various apps. The files that we share on the internet have a specific extension for the files. It is essential to know about the different available and widely used formats so that you can use and access the file easily.

The article below will focus on and share great details about the 3GP file format. The multimedia format is popularly used for its great benefits, such as audio and video transfer. Do you want to know more about the 3GP format? Let’s get started!

In this article

01 What Is 3GP Video Format?

02 Advantages and Disadvantages About Video Format?

03 How Can You Open and Play 3GP Video Format?

04 How Edit 3GP Video More Creatively?

Part 1. What Is 3GP Video Format?

The multimedia files that we share on the internet have the extension as ‘.3GP’. It is an audio and video container made under the proprietorship of the 3rd Generation Partnership Project. The 3GP format stores and transmits the data that is shared between 3G-enabled devices. All 3G devices, along with some 2G and 4G devices, support 3GP file format video recording and playback.

3GP format needs less broadband demand which makes the phone run fluently. Along with taking less space as compared to other formats, it saves multimedia content efficiently. 3GP file format was designed to match the high speed of data transition between 3G networks.

Part 2. Advantages and Disadvantages About Video Format?

The 3GP format was designed to work at a high level on 3G devices. The above section of this article sheds light on what the 3GP file format is. Now that you have adequate knowledge of the format, let’s proceed and talk about the pros and cons of the file format.

Advantages of 3GP Format

• The biggest plus point of using the 3GP format is its size. The format is small in size but can store disk space. The small size of the format uses tiny amounts of data.
• The format is great because it creates an environment for business connections and improves communication. You can share text messages, videos, and multimedia files with your team members.
• 3GP file format is widely used because it has low bandwidth and also it has decreased mobile storage requirements.
• 3GP files are transferred and shared very efficiently. Hence, sharing video files has become a lot easier with this format.
• 3GP files are fast for both streaming and downloading, even if you have a weak or problematic internet connection.

Disadvantages of 3GP Format

• The quality of the audio file is damaged while compressing the file to reduce its size, as compared to the original file.
• Not every program supports 3GP file format; hence users face compatibility issues.
• Compared to the original video, the 3GP video files, after compressing, lose their quality, and the resolution is also compromised.

Part 3. How Can You Open and Play 3GP Video Format?

Do you know there are various file formats and different platforms support different formats? If we specifically talk about the 3GP format, it is supported by VLC Media Player, QuickTime Player, and 5KPlayer. Let’s discuss them:

VLC Media Player

VLC Media Player is a free open-source platform that can play 3GP file format. It is developed by the VideoLAN project. VLC Media Player is a cross-platform media player software and media streamer available for Windows, Mac, Linux, and Unix.

Mobile users can use it irrespective of the device type; Android, iPhone, iPad, and iPod users can use it. VLC can be used to play 3GP format along with any format that you may encounter.

QuickTime Player

QuickTime Player was made under Apple Inc. proprietorship. It is an extendible multimedia framework and can only be used on macOS devices because the Windows-supported version was ceased after 2016. It can handle picture and digital video formats, including a 3GP file format. Although, the MOV file extension represents the QuickTime Player. QuickTime Player is pre-installed on all Mac devices.

5KPlayer

5KPlayer is developed under the proprietorship of DearMob. It is a music and video player. 5KPlayer has built-in support for AirPlay. You can stream audio and video via AirPlay without any loss in the quality of the media file. It supports different formats for multimedia, including a 3GP file format. 5KPlayer provides you the facility to download videos from 300+ sites, including YouTube, Vimeo, and Dailymotion.

3.1. Steps to Open and Play 3GP Format on VLC Media Player

Now that you know about the different platforms that support the 3GP format let us share the steps on how you can open and play 3GP video files on VLC Media Player.

Step 1: After you have installed VLC Media Player on your device, launch it. Head to the ‘Media’ tab from the main screen by accessing the top menu. Or else, simply open VLC Media Player to drag and drop the media file there.

Step 2: Select the ‘Open File’ option from the Media section and locate the 3GP video file on your device. Add the file to VLC and enjoy watching it.

Part 4. How Edit 3GP Video More Creatively?

What else could be better for editing your videos than Wondershare Filmora ? Whenever you want a good video editor, you will find Filmora on top of the list. The video editor comes with an extensive range of features that you cannot even count. Moreover, it offers endless editing capabilities.

For editing unique and stunning 3GP format videos, try Filmora. It comes with both Basic and also Advanced editing features. Do you want to know more about it? Let us tell you. Filmora offers basic and standard editing tools like cut, trim, split, and join.

If we look at the advanced features, they include Green Screen, Scene Detection, Power Tool, Video Snapshot, and whatnot. Moreover, you also get various AI editing features like Auto Highlight, Auto Reframe, Auto Normalization, and much more than this.

What else does Filmora provide to its users? Let’s share a step-by-step guideline about how to edit 3GP file format videos on Filmora along with its other features.

Step 1: Import 3GP Video File

Start by launching Filmora Video Editor on your device and head to the ‘File’ tab from the top menu bar. There, hover on the ‘Import Media’ option; this will open a sub-menu with an option of ‘Import Media Files’; click on it.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Drag to Timeline

You can locate the video file from the device and import it to the software. After a successful import, the media file will appear on the screen, drag and drop it to the ‘Timeline’ to start the editing.

Step 3: Add Audio Effects

Start by adding audio effects to your video and making it more captivating. For this, head to the ‘Audio’ tab and select the most suitable sound from the provided options like Travel Vlog, Folk, Young & Bright, etc.

Step 4: Use Interesting Elements

What kind of elements do you like? With Filmora, you get Countdown, Laser Eye, Subscription, Share, and a lot other cooler options are available under the ‘Elements’ section.

Step 5: Add Attractive Titles

Are you looking for title templates? Have you looked at the ‘Titles’ section in Filmora? You will get beautiful templates according to the latest trends and occasions.

Step 6: Export 3GP File

Once you are done, export the 3GP format file. For this, click on the ‘Export’ button, select the output file format and proceed to save the file.

Bottom Line

We hope that the above article has shared sufficient information with you regarding the 3GP file format. We discussed its pros and cons, ways to open it, and also edit it. As we are concluding, let’s talk a little more about Wondershare Filmora. The video editor is an excellent choice for editing and creating mind-blowing videos.

You get various Basic and also Advanced features that can enhance your video. With Filmora, you can efficiently work with features like Silence Detection, Keyframing, Advanced Color Tuning, and much more. If you wish to create fantastic videos, use Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 Advantages and Disadvantages About Video Format?

03 How Can You Open and Play 3GP Video Format?

04 How Edit 3GP Video More Creatively?

Part 1. What Is 3GP Video Format?

The multimedia files that we share on the internet have the extension as ‘.3GP’. It is an audio and video container made under the proprietorship of the 3rd Generation Partnership Project. The 3GP format stores and transmits the data that is shared between 3G-enabled devices. All 3G devices, along with some 2G and 4G devices, support 3GP file format video recording and playback.

3GP format needs less broadband demand which makes the phone run fluently. Along with taking less space as compared to other formats, it saves multimedia content efficiently. 3GP file format was designed to match the high speed of data transition between 3G networks.

Part 2. Advantages and Disadvantages About Video Format?

The 3GP format was designed to work at a high level on 3G devices. The above section of this article sheds light on what the 3GP file format is. Now that you have adequate knowledge of the format, let’s proceed and talk about the pros and cons of the file format.

Advantages of 3GP Format

• The biggest plus point of using the 3GP format is its size. The format is small in size but can store disk space. The small size of the format uses tiny amounts of data.
• The format is great because it creates an environment for business connections and improves communication. You can share text messages, videos, and multimedia files with your team members.
• 3GP file format is widely used because it has low bandwidth and also it has decreased mobile storage requirements.
• 3GP files are transferred and shared very efficiently. Hence, sharing video files has become a lot easier with this format.
• 3GP files are fast for both streaming and downloading, even if you have a weak or problematic internet connection.

Disadvantages of 3GP Format

• The quality of the audio file is damaged while compressing the file to reduce its size, as compared to the original file.
• Not every program supports 3GP file format; hence users face compatibility issues.
• Compared to the original video, the 3GP video files, after compressing, lose their quality, and the resolution is also compromised.

Part 3. How Can You Open and Play 3GP Video Format?

Do you know there are various file formats and different platforms support different formats? If we specifically talk about the 3GP format, it is supported by VLC Media Player, QuickTime Player, and 5KPlayer. Let’s discuss them:

VLC Media Player

VLC Media Player is a free open-source platform that can play 3GP file format. It is developed by the VideoLAN project. VLC Media Player is a cross-platform media player software and media streamer available for Windows, Mac, Linux, and Unix.

Mobile users can use it irrespective of the device type; Android, iPhone, iPad, and iPod users can use it. VLC can be used to play 3GP format along with any format that you may encounter.

QuickTime Player

QuickTime Player was made under Apple Inc. proprietorship. It is an extendible multimedia framework and can only be used on macOS devices because the Windows-supported version was ceased after 2016. It can handle picture and digital video formats, including a 3GP file format. Although, the MOV file extension represents the QuickTime Player. QuickTime Player is pre-installed on all Mac devices.

5KPlayer

5KPlayer is developed under the proprietorship of DearMob. It is a music and video player. 5KPlayer has built-in support for AirPlay. You can stream audio and video via AirPlay without any loss in the quality of the media file. It supports different formats for multimedia, including a 3GP file format. 5KPlayer provides you the facility to download videos from 300+ sites, including YouTube, Vimeo, and Dailymotion.

3.1. Steps to Open and Play 3GP Format on VLC Media Player

Now that you know about the different platforms that support the 3GP format let us share the steps on how you can open and play 3GP video files on VLC Media Player.

Step 1: After you have installed VLC Media Player on your device, launch it. Head to the ‘Media’ tab from the main screen by accessing the top menu. Or else, simply open VLC Media Player to drag and drop the media file there.

Step 2: Select the ‘Open File’ option from the Media section and locate the 3GP video file on your device. Add the file to VLC and enjoy watching it.

Part 4. How Edit 3GP Video More Creatively?

What else could be better for editing your videos than Wondershare Filmora ? Whenever you want a good video editor, you will find Filmora on top of the list. The video editor comes with an extensive range of features that you cannot even count. Moreover, it offers endless editing capabilities.

For editing unique and stunning 3GP format videos, try Filmora. It comes with both Basic and also Advanced editing features. Do you want to know more about it? Let us tell you. Filmora offers basic and standard editing tools like cut, trim, split, and join.

If we look at the advanced features, they include Green Screen, Scene Detection, Power Tool, Video Snapshot, and whatnot. Moreover, you also get various AI editing features like Auto Highlight, Auto Reframe, Auto Normalization, and much more than this.

What else does Filmora provide to its users? Let’s share a step-by-step guideline about how to edit 3GP file format videos on Filmora along with its other features.

Step 1: Import 3GP Video File

Start by launching Filmora Video Editor on your device and head to the ‘File’ tab from the top menu bar. There, hover on the ‘Import Media’ option; this will open a sub-menu with an option of ‘Import Media Files’; click on it.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Drag to Timeline

You can locate the video file from the device and import it to the software. After a successful import, the media file will appear on the screen, drag and drop it to the ‘Timeline’ to start the editing.

Step 3: Add Audio Effects

Start by adding audio effects to your video and making it more captivating. For this, head to the ‘Audio’ tab and select the most suitable sound from the provided options like Travel Vlog, Folk, Young & Bright, etc.

Step 4: Use Interesting Elements

What kind of elements do you like? With Filmora, you get Countdown, Laser Eye, Subscription, Share, and a lot other cooler options are available under the ‘Elements’ section.

Step 5: Add Attractive Titles

Are you looking for title templates? Have you looked at the ‘Titles’ section in Filmora? You will get beautiful templates according to the latest trends and occasions.

Step 6: Export 3GP File

Once you are done, export the 3GP format file. For this, click on the ‘Export’ button, select the output file format and proceed to save the file.

Bottom Line

We hope that the above article has shared sufficient information with you regarding the 3GP file format. We discussed its pros and cons, ways to open it, and also edit it. As we are concluding, let’s talk a little more about Wondershare Filmora. The video editor is an excellent choice for editing and creating mind-blowing videos.

You get various Basic and also Advanced features that can enhance your video. With Filmora, you can efficiently work with features like Silence Detection, Keyframing, Advanced Color Tuning, and much more. If you wish to create fantastic videos, use Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 Advantages and Disadvantages About Video Format?

03 How Can You Open and Play 3GP Video Format?

04 How Edit 3GP Video More Creatively?

Part 1. What Is 3GP Video Format?

The multimedia files that we share on the internet have the extension as ‘.3GP’. It is an audio and video container made under the proprietorship of the 3rd Generation Partnership Project. The 3GP format stores and transmits the data that is shared between 3G-enabled devices. All 3G devices, along with some 2G and 4G devices, support 3GP file format video recording and playback.

3GP format needs less broadband demand which makes the phone run fluently. Along with taking less space as compared to other formats, it saves multimedia content efficiently. 3GP file format was designed to match the high speed of data transition between 3G networks.

Part 2. Advantages and Disadvantages About Video Format?

The 3GP format was designed to work at a high level on 3G devices. The above section of this article sheds light on what the 3GP file format is. Now that you have adequate knowledge of the format, let’s proceed and talk about the pros and cons of the file format.

Advantages of 3GP Format

• The biggest plus point of using the 3GP format is its size. The format is small in size but can store disk space. The small size of the format uses tiny amounts of data.
• The format is great because it creates an environment for business connections and improves communication. You can share text messages, videos, and multimedia files with your team members.
• 3GP file format is widely used because it has low bandwidth and also it has decreased mobile storage requirements.
• 3GP files are transferred and shared very efficiently. Hence, sharing video files has become a lot easier with this format.
• 3GP files are fast for both streaming and downloading, even if you have a weak or problematic internet connection.

Disadvantages of 3GP Format

• The quality of the audio file is damaged while compressing the file to reduce its size, as compared to the original file.
• Not every program supports 3GP file format; hence users face compatibility issues.
• Compared to the original video, the 3GP video files, after compressing, lose their quality, and the resolution is also compromised.

Part 3. How Can You Open and Play 3GP Video Format?

Do you know there are various file formats and different platforms support different formats? If we specifically talk about the 3GP format, it is supported by VLC Media Player, QuickTime Player, and 5KPlayer. Let’s discuss them:

VLC Media Player

VLC Media Player is a free open-source platform that can play 3GP file format. It is developed by the VideoLAN project. VLC Media Player is a cross-platform media player software and media streamer available for Windows, Mac, Linux, and Unix.

Mobile users can use it irrespective of the device type; Android, iPhone, iPad, and iPod users can use it. VLC can be used to play 3GP format along with any format that you may encounter.

QuickTime Player

QuickTime Player was made under Apple Inc. proprietorship. It is an extendible multimedia framework and can only be used on macOS devices because the Windows-supported version was ceased after 2016. It can handle picture and digital video formats, including a 3GP file format. Although, the MOV file extension represents the QuickTime Player. QuickTime Player is pre-installed on all Mac devices.

5KPlayer

5KPlayer is developed under the proprietorship of DearMob. It is a music and video player. 5KPlayer has built-in support for AirPlay. You can stream audio and video via AirPlay without any loss in the quality of the media file. It supports different formats for multimedia, including a 3GP file format. 5KPlayer provides you the facility to download videos from 300+ sites, including YouTube, Vimeo, and Dailymotion.

3.1. Steps to Open and Play 3GP Format on VLC Media Player

Now that you know about the different platforms that support the 3GP format let us share the steps on how you can open and play 3GP video files on VLC Media Player.

Step 1: After you have installed VLC Media Player on your device, launch it. Head to the ‘Media’ tab from the main screen by accessing the top menu. Or else, simply open VLC Media Player to drag and drop the media file there.

Step 2: Select the ‘Open File’ option from the Media section and locate the 3GP video file on your device. Add the file to VLC and enjoy watching it.

Part 4. How Edit 3GP Video More Creatively?

What else could be better for editing your videos than Wondershare Filmora ? Whenever you want a good video editor, you will find Filmora on top of the list. The video editor comes with an extensive range of features that you cannot even count. Moreover, it offers endless editing capabilities.

For editing unique and stunning 3GP format videos, try Filmora. It comes with both Basic and also Advanced editing features. Do you want to know more about it? Let us tell you. Filmora offers basic and standard editing tools like cut, trim, split, and join.

If we look at the advanced features, they include Green Screen, Scene Detection, Power Tool, Video Snapshot, and whatnot. Moreover, you also get various AI editing features like Auto Highlight, Auto Reframe, Auto Normalization, and much more than this.

What else does Filmora provide to its users? Let’s share a step-by-step guideline about how to edit 3GP file format videos on Filmora along with its other features.

Step 1: Import 3GP Video File

Start by launching Filmora Video Editor on your device and head to the ‘File’ tab from the top menu bar. There, hover on the ‘Import Media’ option; this will open a sub-menu with an option of ‘Import Media Files’; click on it.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Drag to Timeline

You can locate the video file from the device and import it to the software. After a successful import, the media file will appear on the screen, drag and drop it to the ‘Timeline’ to start the editing.

Step 3: Add Audio Effects

Start by adding audio effects to your video and making it more captivating. For this, head to the ‘Audio’ tab and select the most suitable sound from the provided options like Travel Vlog, Folk, Young & Bright, etc.

Step 4: Use Interesting Elements

What kind of elements do you like? With Filmora, you get Countdown, Laser Eye, Subscription, Share, and a lot other cooler options are available under the ‘Elements’ section.

Step 5: Add Attractive Titles

Are you looking for title templates? Have you looked at the ‘Titles’ section in Filmora? You will get beautiful templates according to the latest trends and occasions.

Step 6: Export 3GP File

Once you are done, export the 3GP format file. For this, click on the ‘Export’ button, select the output file format and proceed to save the file.

Bottom Line

We hope that the above article has shared sufficient information with you regarding the 3GP file format. We discussed its pros and cons, ways to open it, and also edit it. As we are concluding, let’s talk a little more about Wondershare Filmora. The video editor is an excellent choice for editing and creating mind-blowing videos.

You get various Basic and also Advanced features that can enhance your video. With Filmora, you can efficiently work with features like Silence Detection, Keyframing, Advanced Color Tuning, and much more. If you wish to create fantastic videos, use Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 Advantages and Disadvantages About Video Format?

03 How Can You Open and Play 3GP Video Format?

04 How Edit 3GP Video More Creatively?

Part 1. What Is 3GP Video Format?

The multimedia files that we share on the internet have the extension as ‘.3GP’. It is an audio and video container made under the proprietorship of the 3rd Generation Partnership Project. The 3GP format stores and transmits the data that is shared between 3G-enabled devices. All 3G devices, along with some 2G and 4G devices, support 3GP file format video recording and playback.

3GP format needs less broadband demand which makes the phone run fluently. Along with taking less space as compared to other formats, it saves multimedia content efficiently. 3GP file format was designed to match the high speed of data transition between 3G networks.

Part 2. Advantages and Disadvantages About Video Format?

The 3GP format was designed to work at a high level on 3G devices. The above section of this article sheds light on what the 3GP file format is. Now that you have adequate knowledge of the format, let’s proceed and talk about the pros and cons of the file format.

Advantages of 3GP Format

• The biggest plus point of using the 3GP format is its size. The format is small in size but can store disk space. The small size of the format uses tiny amounts of data.
• The format is great because it creates an environment for business connections and improves communication. You can share text messages, videos, and multimedia files with your team members.
• 3GP file format is widely used because it has low bandwidth and also it has decreased mobile storage requirements.
• 3GP files are transferred and shared very efficiently. Hence, sharing video files has become a lot easier with this format.
• 3GP files are fast for both streaming and downloading, even if you have a weak or problematic internet connection.

Disadvantages of 3GP Format

• The quality of the audio file is damaged while compressing the file to reduce its size, as compared to the original file.
• Not every program supports 3GP file format; hence users face compatibility issues.
• Compared to the original video, the 3GP video files, after compressing, lose their quality, and the resolution is also compromised.

Part 3. How Can You Open and Play 3GP Video Format?

Do you know there are various file formats and different platforms support different formats? If we specifically talk about the 3GP format, it is supported by VLC Media Player, QuickTime Player, and 5KPlayer. Let’s discuss them:

VLC Media Player

VLC Media Player is a free open-source platform that can play 3GP file format. It is developed by the VideoLAN project. VLC Media Player is a cross-platform media player software and media streamer available for Windows, Mac, Linux, and Unix.

Mobile users can use it irrespective of the device type; Android, iPhone, iPad, and iPod users can use it. VLC can be used to play 3GP format along with any format that you may encounter.

QuickTime Player

QuickTime Player was made under Apple Inc. proprietorship. It is an extendible multimedia framework and can only be used on macOS devices because the Windows-supported version was ceased after 2016. It can handle picture and digital video formats, including a 3GP file format. Although, the MOV file extension represents the QuickTime Player. QuickTime Player is pre-installed on all Mac devices.

5KPlayer

5KPlayer is developed under the proprietorship of DearMob. It is a music and video player. 5KPlayer has built-in support for AirPlay. You can stream audio and video via AirPlay without any loss in the quality of the media file. It supports different formats for multimedia, including a 3GP file format. 5KPlayer provides you the facility to download videos from 300+ sites, including YouTube, Vimeo, and Dailymotion.

3.1. Steps to Open and Play 3GP Format on VLC Media Player

Now that you know about the different platforms that support the 3GP format let us share the steps on how you can open and play 3GP video files on VLC Media Player.

Step 1: After you have installed VLC Media Player on your device, launch it. Head to the ‘Media’ tab from the main screen by accessing the top menu. Or else, simply open VLC Media Player to drag and drop the media file there.

Step 2: Select the ‘Open File’ option from the Media section and locate the 3GP video file on your device. Add the file to VLC and enjoy watching it.

Part 4. How Edit 3GP Video More Creatively?

What else could be better for editing your videos than Wondershare Filmora ? Whenever you want a good video editor, you will find Filmora on top of the list. The video editor comes with an extensive range of features that you cannot even count. Moreover, it offers endless editing capabilities.

For editing unique and stunning 3GP format videos, try Filmora. It comes with both Basic and also Advanced editing features. Do you want to know more about it? Let us tell you. Filmora offers basic and standard editing tools like cut, trim, split, and join.

If we look at the advanced features, they include Green Screen, Scene Detection, Power Tool, Video Snapshot, and whatnot. Moreover, you also get various AI editing features like Auto Highlight, Auto Reframe, Auto Normalization, and much more than this.

What else does Filmora provide to its users? Let’s share a step-by-step guideline about how to edit 3GP file format videos on Filmora along with its other features.

Step 1: Import 3GP Video File

Start by launching Filmora Video Editor on your device and head to the ‘File’ tab from the top menu bar. There, hover on the ‘Import Media’ option; this will open a sub-menu with an option of ‘Import Media Files’; click on it.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Drag to Timeline

You can locate the video file from the device and import it to the software. After a successful import, the media file will appear on the screen, drag and drop it to the ‘Timeline’ to start the editing.

Step 3: Add Audio Effects

Start by adding audio effects to your video and making it more captivating. For this, head to the ‘Audio’ tab and select the most suitable sound from the provided options like Travel Vlog, Folk, Young & Bright, etc.

Step 4: Use Interesting Elements

What kind of elements do you like? With Filmora, you get Countdown, Laser Eye, Subscription, Share, and a lot other cooler options are available under the ‘Elements’ section.

Step 5: Add Attractive Titles

Are you looking for title templates? Have you looked at the ‘Titles’ section in Filmora? You will get beautiful templates according to the latest trends and occasions.

Step 6: Export 3GP File

Once you are done, export the 3GP format file. For this, click on the ‘Export’ button, select the output file format and proceed to save the file.

Bottom Line

We hope that the above article has shared sufficient information with you regarding the 3GP file format. We discussed its pros and cons, ways to open it, and also edit it. As we are concluding, let’s talk a little more about Wondershare Filmora. The video editor is an excellent choice for editing and creating mind-blowing videos.

You get various Basic and also Advanced features that can enhance your video. With Filmora, you can efficiently work with features like Silence Detection, Keyframing, Advanced Color Tuning, and much more. If you wish to create fantastic videos, use Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: