How To Brighten Video In Premiere Pro | Step By Step Guide

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.

There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.

There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.

In this article

01 Can I Brighten A Dark Video?

02 How to Brighten Video in Adobe Premiere Pro?

03 How To Lighten Up A Dark Video In Adobe Premiere Pro?

04 Enhancing Your Video In Premiere Pro

Can I Brighten A Dark Video?

This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.

There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.

How to Brighten Video in Adobe Premiere Pro?

Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.

Step 1

Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.

Step 2

Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.

Step 3

Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.

Step 4

You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.

Step 5

Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.

How To Lighten Up A Dark Video In Adobe Premiere Pro?

The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:

Step 1

If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.

Step 2

Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.

Step 3

Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.

Step 4

Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.

Step 5

Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.

Step 6

Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.

Step 7

The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.

Enhancing Your Video In Premiere Pro

Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:

Step 1

In the effects panel, search for “unsharp Mask” and drag it to the video clip.

Step 2

In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.

Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.

Conclusion

● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.

● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.

Try It Free Try It Free

Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.

There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.

There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.

In this article

01 Can I Brighten A Dark Video?

02 How to Brighten Video in Adobe Premiere Pro?

03 How To Lighten Up A Dark Video In Adobe Premiere Pro?

04 Enhancing Your Video In Premiere Pro

Can I Brighten A Dark Video?

This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.

There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.

How to Brighten Video in Adobe Premiere Pro?

Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.

Step 1

Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.

Step 2

Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.

Step 3

Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.

Step 4

You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.

Step 5

Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.

How To Lighten Up A Dark Video In Adobe Premiere Pro?

The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:

Step 1

If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.

Step 2

Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.

Step 3

Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.

Step 4

Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.

Step 5

Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.

Step 6

Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.

Step 7

The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.

Enhancing Your Video In Premiere Pro

Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:

Step 1

In the effects panel, search for “unsharp Mask” and drag it to the video clip.

Step 2

In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.

Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.

Conclusion

● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.

● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.

Try It Free Try It Free

Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.

There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.

There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.

In this article

01 Can I Brighten A Dark Video?

02 How to Brighten Video in Adobe Premiere Pro?

03 How To Lighten Up A Dark Video In Adobe Premiere Pro?

04 Enhancing Your Video In Premiere Pro

Can I Brighten A Dark Video?

This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.

There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.

How to Brighten Video in Adobe Premiere Pro?

Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.

Step 1

Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.

Step 2

Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.

Step 3

Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.

Step 4

You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.

Step 5

Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.

How To Lighten Up A Dark Video In Adobe Premiere Pro?

The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:

Step 1

If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.

Step 2

Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.

Step 3

Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.

Step 4

Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.

Step 5

Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.

Step 6

Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.

Step 7

The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.

Enhancing Your Video In Premiere Pro

Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:

Step 1

In the effects panel, search for “unsharp Mask” and drag it to the video clip.

Step 2

In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.

Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.

Conclusion

● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.

● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.

Try It Free Try It Free

Brighter videos always attract more attention. Indeed, a well-lit video can make your content shine and bring out the best in your story. But what if you forgot to turn on the lights or the camera just couldn’t handle the situation? We’ve all been there: you’re shooting a video, but there aren’t enough light sources. You end up with dark footage. It’s impossible to share this on your social media accounts or with your friends and family.

There are many reasons why people want to brighten a dark video. Maybe you recorded a video with your phone, but the lighting was too dim in the room. Or maybe you were outside, and the sun was behind you, casting shadows on your face while recording. In these cases, it can be helpful to know how to make a dark video brighter.

There is a way to apply simple corrections using Premiere Pro, no matter the reason. In this article, I’ll show you how to brighten your video in Premiere Pro so you can keep all the details in the highlights. This can be very useful if you’re working with a lot of footage that has been underexposed, and sometimes your shot might look too dark or even black.

In this article

01 Can I Brighten A Dark Video?

02 How to Brighten Video in Adobe Premiere Pro?

03 How To Lighten Up A Dark Video In Adobe Premiere Pro?

04 Enhancing Your Video In Premiere Pro

Can I Brighten A Dark Video?

This is a common question that comes up among video editors, so I thought I’d answer it here. The quick answer is yes. There are many online tools that can help you brighten a dark video or adjust the brightness of your video. A lot of times, you’ll get a video file that was shot in low light, and it will make your subject look dark and underexposed. Video brightness is an important feature that is easy to adjust. However, if your video is too dark to start off with, it may be difficult to brighten it in a way that doesn’t look unnatural.

There are several ways you can brighten a dark video. For example, you can use color correction or add more light to the scene before you film. If you already have a dark video, then you’ll need to adjust the contrast and brightness of your video during post-production. You can easily do this by using video editing software but keep in mind that too much brightness or too much contrast can result in poor video quality. So, you have to keep everything in balance.

How to Brighten Video in Adobe Premiere Pro?

Adobe Premiere Pro is your one-stop solution for editing videos, whether you’re editing a film or a TV ad. It gives you the flexibility to edit videos of any format. Adobe Premium makes brightening videos easy. Follow the steps below.

Step 1

Launch Adobe Premiere Pro, open a project, and then import the video file you want to brighten. Make sure that the video file has been imported into the media library before you start editing it.

Step 2

Next, click on the brightness and contrast option in the Effects panel, located at the bottom left of the software to adjust the brightness and contrast of your video.

Step 3

Bring the brightness and contrast option to the center area below the uploaded video. You can do this by simply dragging it and dropping it beneath the video.

Step 4

You can now easily increase the brightness by changing the brightness number in the effects control panel located to the right of the uploaded video.

Step 5

Adjust the brightness according to your needs and save the video with your preferred settings so you can watch it later or share it with your friends across different platforms.

How To Lighten Up A Dark Video In Adobe Premiere Pro?

The first method that we used was quite simple. All you needed to do was to increase the brightness of the video, and you were good to go. But this method is a bit different. Although it is a little more complicated than the first method, it can do wonders for you. Suppose you have a video shot in very dim light, and it has a lot of dark sections. There is a chance that Increasing the brightness won’t do much. So, you can use this method to brighten your video and improve its visibility. Just follow the steps mentioned below:

Step 1

If you haven’t already opened your video in Adobe Premiere Pro, launch the program and import your footage. Then drag it onto the timeline so that it appears at the top.

Step 2

Effects tab can be found in the left-most panel of adobe premiere pro. Click the Effects tab and search for Lightning effects in the search bar and click on it.

Step 3

Use the drag-and-drop method to add the lighting effects to the clip. Once you have done that, you will feel like your video is having a distorted flash-like effect. But don’t worry as we are not going for that.

Step 4

Now go to the effects control tab present at the top of the screen, and from there, you have to click on the lighting effects.

Step 5

Once you click on the lighting effects, you will see many options on your screen. Click on the “Light 1” button to open its dropdown menu. There you will see the spotlight selected by default.

Step 6

Click on the dropdown icon adjacent to the spotlight to open up the menu. You need to select “Directional” instead of Spotlight, and you will notice that the dark sections have been brightened significantly.

Step 7

The brightness intensity can even be increased by changing the value for the intensity option within the effect control panel.

Enhancing Your Video In Premiere Pro

Once you have done all the steps above, you can also use the video enhancing feature of adobe premiere pro to improve the quality of your videos. When you brighten a video, there is a chance that you might lose quality a little bit. So, to overcome that deficiency, this method might be helpful. Enhancing your videos with Premiere Pro is easy once you know the proper steps to do so. Just follow the steps described below:

Step 1

In the effects panel, search for “unsharp Mask” and drag it to the video clip.

Step 2

In the effect control panel under the Unsharp mask, set the amounts, radius, and threshold to enhance the video.

Keep in mind that you can increase the values of these parameters too high, but you will end up with a distorted video. Try increasing the values by small increments and see what happens. Avoid increasing the “amount” and radius value beyond 100% and ten, respectively.

Conclusion

● Brightening in Premiere Pro is a simple process that can benefit some video projects. Whether you want to brighten the video by increasing exposure, increasing luminance, or adding a vignette effect altogether, there are several ways to do so in Premiere Pro.

● However, you should know that neither option is necessarily better than the other. Video editing in general does take a bit of practice to master, but in this article, we have provided you with the basics and helped you on your way. All methods can be helpful in different situations, and even with similar circumstances, you might find advantages to all practices. Try out these methods for yourself and see which one best suits your needs.

Do You Seek a Guide to Add Motion in Blender? This Article Explains the Blender Motion Blur Effect in Detail and Helps You Master It

Motion blur effect, as a terminology, holds great significance in multiple industrial uses. From filmmaking to basic photography, the motion blur effect is consumed as a reality-setting standard, which defines its significance. Many platforms are providing this effect to enhance the creativity of their users. Blender is also known among these software providing such services while designing animations.

We will target a comprehensive guide on adding motion blur in Blender using the right way. Therefore, if you seek the appropriate way of adding motion blur in Blender, the following description is for you.

Part 1: What is Blender?

As we start our discussion, we will review Blender as a free and open-source software. Following this, we will continue realizing the benefits of adding motion blur through Blender:

Introduction to Blender

For those unaware of Blender, it is an open-source, free creativity software. You can find it as the perfect designing platform for your 3D content. This software has made itself accessible to the market with ease. This has made it quite famous among professionals, and is recommended for its high-quality, feature-rich design. From modeling to sculpting, Blender provides some great options to work with.

If you are up for editing some videos through Blender, it offers a great course of features, including motion blur. This Blender motion blur tutorial intends to bring you a similar insight into this great software. This will help you know the procedure of executing such facets to perfection.

Benefits of Using Motion Blur Effect

There are many benefits of using the motion blur effect in creative work. The following points are the highlights and benefits of adding the motion blur effect:

· Perfect For Idolizing Speed

The use of the motion blur effect is the best way to show the speed of the object. Using such effects gives the viewer an experience of the swiftness that is contained in the object.

· Resolves Flickering

Rather than trying out fast motion, you can add such effects to your 3D content to enhance the motion blur. This also helps get over problems, including strobing and flickering clips.

· Attenuates Real-Effect

One great thing about our human eye is its ability to bring motion blur in fast-moving objects. Since this is a real-life experience, the motion blur effect highlights this particular effect and brings the edited content closer to reality.

Part 2: How Do You Motion Blur An Object in Blender?

As stated before, Blender can be a great option for adding motion blur to objects. Many properties are involved in setting up the motion blur effect on an object. It includes defining the position, shutter, separation, and several other parameters. In this part, we will be looking for a guide on how to add motion blur in Blender:

Step1 With the video opened on Blender, proceed to the “Render Properties.” Look to enable “Motion Blur” from the available options. Click on the arrowhead adjacent to it to access its advanced blur options.

Step2 Start by setting its “Position” in the start, center, or end, according to the requirements. For those who are not sure of it, they can use “Center on Frame.” If the objects rapidly move in the video, reduce the “Shutter” value or vice versa.

Step3 Following this, define the “Background Separation” according to how you require the foreground and background. Next, you will have to increase or decrease the “Max Blur” pixels to define the blur intensity in the video.

Step4 For objects with complex topology, you might have to increase the “Steps,” hence the “Shutter” time. For simple objects, the value remains unity. To apply the motion blur effect, use the F12 key for rendering the video.

Bonus Tips – Add Motion Blur to Animated Video with Filmora

Blender can become challenging to use, a no-go for basic video editors. This requires a simpler video editor that can help them add motion blurs. For applying this to a video, Wondershare Filmora is a great option. This video editor is known for its easy-going, conclusive, and diversifying features.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Wondershare Filmora can be a real deal for users who are looking for high-quality video editing. A simple interface gives a perfect option to bring creativity to your work. If you wish to know more about Filmora, the following features will help you out:

• You can try out the Instant Mode offered on Filmora for creating videos in minutes.
• You can adjust the video speed to get better control of the keyframes. With the help of this feature, you can easily create cinematic effects.
• It also includes the feature of motion tracking to intensify your video creation.
• Filmora’s ability to blend in effects in the videos is one of its major highlights. There are multiple modes available in Filmora to make things interesting.
• Its AI Portrait mode helps identify humans in the video and helps them enhance their parameters.

How to Add Motion Blur to Animated Video with Wondershare Filmora

Since you are looking forward to a method explaining how to add motion blur to videos with Filmora, the following step-by-step guide is for you:

Step1 Launch Filmora and Import Animated Video

You must launch Wondershare Filmora after installing it successfully on your computer. Click the “Create New Project” button to lead to a new project screen. Here, tap on the “Folder” icon to import the animated video that is to be edited.

Step2 Split the Video to Set Platform for Adding the Effect

Once uploaded, drag and drop it on the timeline. Use the play head and adjust it to the point where you want to start the motion blur. Click the “Scissor” icon to split the clip from the specific point.

Step3 Look for the Blur Effect and Add

Move to the “Effects” tab from the top and look for “Video Effects” from the left section. Afterward, type “Blur” in the search bar of the effects. You will be led to a list of different blur options, which you can pick and add to the part of the video that was split.

Step4 Include Transition for Smoothness and Export Video

After adjusting the parameters, find the “Dissolve” transition from the “Transition” tab for smoothening the effect. Once done, you can export the edited clip by clicking the “Export” button and setting the parameters.

FAQ

What does motion blur do in Blender?

There are two different techniques adopted in the Blender motion blur effect. The first is recognized as the “Sample Motion Blur” technique, an advanced, slower, and controlled way of adding motion blur. The other technique, known as “Vector Blur,” is faster but has drawbacks, which do not look professional.

Conclusion

With that, a complete guide on how to add motion blur in Blender has been presented and explained. The provided technique will help you include the motion blur effect to perfection. For a more straightforward and quicker procedure, Wondershare Filmora gives a perfect experience of adding motion blur in animated videos. The article helps guide you toward selecting the best option in the market.

Free Download For macOS 10.14 or later

Wondershare Filmora can be a real deal for users who are looking for high-quality video editing. A simple interface gives a perfect option to bring creativity to your work. If you wish to know more about Filmora, the following features will help you out:

• You can try out the Instant Mode offered on Filmora for creating videos in minutes.
• You can adjust the video speed to get better control of the keyframes. With the help of this feature, you can easily create cinematic effects.
• It also includes the feature of motion tracking to intensify your video creation.
• Filmora’s ability to blend in effects in the videos is one of its major highlights. There are multiple modes available in Filmora to make things interesting.
• Its AI Portrait mode helps identify humans in the video and helps them enhance their parameters.

How to Add Motion Blur to Animated Video with Wondershare Filmora

Since you are looking forward to a method explaining how to add motion blur to videos with Filmora, the following step-by-step guide is for you:

Step1 Launch Filmora and Import Animated Video

You must launch Wondershare Filmora after installing it successfully on your computer. Click the “Create New Project” button to lead to a new project screen. Here, tap on the “Folder” icon to import the animated video that is to be edited.

Step2 Split the Video to Set Platform for Adding the Effect

Once uploaded, drag and drop it on the timeline. Use the play head and adjust it to the point where you want to start the motion blur. Click the “Scissor” icon to split the clip from the specific point.

Step3 Look for the Blur Effect and Add

Move to the “Effects” tab from the top and look for “Video Effects” from the left section. Afterward, type “Blur” in the search bar of the effects. You will be led to a list of different blur options, which you can pick and add to the part of the video that was split.

Step4 Include Transition for Smoothness and Export Video

After adjusting the parameters, find the “Dissolve” transition from the “Transition” tab for smoothening the effect. Once done, you can export the edited clip by clicking the “Export” button and setting the parameters.

FAQ

What does motion blur do in Blender?

There are two different techniques adopted in the Blender motion blur effect. The first is recognized as the “Sample Motion Blur” technique, an advanced, slower, and controlled way of adding motion blur. The other technique, known as “Vector Blur,” is faster but has drawbacks, which do not look professional.

Conclusion

With that, a complete guide on how to add motion blur in Blender has been presented and explained. The provided technique will help you include the motion blur effect to perfection. For a more straightforward and quicker procedure, Wondershare Filmora gives a perfect experience of adding motion blur in animated videos. The article helps guide you toward selecting the best option in the market.

Best Ideas for Time Lapse Video

Are you thinking of stepping out of the familiar world of still photography to make a time-lapse video?

As you all know I am a fan of travel videos and time-lapse video because why not? There is no denying that time-lapse techniques are a perfect medium for travel videos.

In this article will give you some ideas to get started in time-lapse video or photography and let’s define what a time-lapse video and what makes them great.

What is Time Lapse

Time-lapse is a creative filming and video editing technique that manipulates how the frame rate is captured. Frame rate is the number of images or frames appearing in a second of video. In most videos, the frame rate and playback speed are the same. In a time-lapse video, the frame rate is stretched out far more: when played back at average speed, time appears to be sped up.

Time-lapse can also refer to a camera’s shutter speed (How long the camera’s shutter remains open to let light in). A similar effect to time-lapse is found in stop-motion videos. The subject doesn’t move but seems to be in motion because it’s manually or repeatedly moved and then photographed. The images are then strung together to create video-like motion.

How Time-lapse Works

Time-lapse photography is a technique that records a scene or objects that change at a slow speed and turns it into a video that plays back at high speed.

Most time-lapse videos are projected at a speed of 30 frames per second. The frame rate of your time-lapse video can be determined in the editing process, but you will need to account for how quickly the action is taking place in the camera or your video will be a collection if stills. Consider what FPS you want to use in your video. You need to capture that many frames per second to create a time-lapse effect. If you’re shooting a 10 second video at 30fps, you should end up with 300 images.

What equipment needed for time-lapse video?

Time-lapse photography requires only a few special pieces of equipment.

1. Camera / Smartphones

Technically any point and shoot camera or smartphone can be used for time-lapse video, the easiest ones to work are DSLR or mirrorless cameras, some even have an in camera intervalometer (often called a time-lapse feature or time-lapse mode), which means you’ll need less equipment to take great time-lapse video.

2. High-capacity Memory Card

For the best results, shoot in RAW format which takes image in the highest resolution with actual image dimensions. You’ll need to prepare for very large RAW file sizes, so bring multiple high capacity memory cards.

3.Tripod

A tripod is essential to time-lapse video or photography, because the camera needs to stay perfectly still in order to emphasize the steady movement of your subject and to avoid overlay blurry videos or photos.

How to Capture Times-lapse Video

A technique that was once found only in video editing software is now on nearly every mobile device. So what’s the best way to make an amazing time-lapse video that stands apart from the rest? That depends on how you plan to capture the footage.

Smartphones:

Most phones have a time-lapse feature in their camera app. Be advised: you will need to record for an extended period, as 30 minutes equates to about 10 seconds of footage. Like a video camera, you will need a tripod to steady your shots. On an iPhone, you can either film a time-lapse or stitch one together from your photo collection, all without a video editor.

DSLR Camera

For DSLR camera you’ll need a tripod and a device called intervalometer. The first is essential to make sure your camera is stationary and is taking photos if the exact same location without moving anywhere.

An intervalometer, or a remote control, is a device that allows you to set your camera to hit the shutter button at an interval of your choice. In other words, an intervalometer is there to let you rest aside without having a manually click the shutter button yourself.

Here are some video ideas for your time-lapse

• Ice melting
• Flower and plants
• Clouds moving
• Sunrise/sunset
• Star movement
• Traffic movement

Ice melting

Time-lapse is an ideal way to capture the mesmerizing transition between water and ice. Even something as simple as watching ice melt can be appealing.

Flower and plants

Flowers and plants can be beautiful to behold, but their transformation from seed to adult plant is often absolutely breathtaking. If you have an indoor plant that you are about to start growing you can set up a camera on a mount of a tripod at the angle with which you want to capture. As you water, groom or fertilize on a regular schedule, you can incorporate taking a photograph at the same time.

Clouds moving

The clouds can provide a whole host of phenomena that will both enlighten the observer to the complexities of the atmosphere or cosmos but will also provide a beautiful spectacle in the daytime, the movement of clouds can be quite spell binding and the rolling in of rain or a thunderstorm can be particularly interesting.

Sunrise/Sunset

Shooting a sunset is more difficult. The light changes during the selected time period.

To overcome this, use remote control camera software. This can be compensated by increasing the ISO or decreasing the shutter speed as the light dims.

Star movement

At night, if the sky is clear and you are in an area dark enough, the stars in the sky can provide a beautiful time-lapse as the stars move in relation to the observer due to earths rotations.

Traffic movement

The interconnectedness of vehicles moving along busy roads, trailing light patterns, and the general hustle and bustle of city life can be brought to you in a dynamic way via time-lapse videos.

It is the smooth impression of motion which time-lapse is able to produce that can emphasize and help to invigorate something as ordinary and everyday as the coming and going of traffic.

Edit your video with Wondershare Filmora

Wondershare Filmora has the action camera tool that allows you to fasten up your video without re-encoding. This means the quality of the video remains intact without any change after exporting. Here is how to convert a standard video to a time-lapse:

Step1 Download Wondershare Filmora from the official website

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step2 Open Filmora, then click action camera tool

Step3 Click import action cam video to import your file

Step4 click on the speed icon add marker button. Then drag the marker all the way over the target video.

Step5 Next drag the slider under the speed tool to speed up the video according to your desire.

Step6 Lastly when done, export and save the final video.

Conclusion

Hope this article can give you an idea on how to make a good time-lapse video. It’s so fun doing it you will see how the things change that fast. Time-lapse content is typically just that, shorter, more visually interesting content, unlike most conventional video, time-lapse video can tell a story within just a few second. Start creating nice and creative time-lapse video now and make it as one content on your you tube channel.

Free Download For macOS 10.14 or later

Step2 Open Filmora, then click action camera tool

Step3 Click import action cam video to import your file

Step4 click on the speed icon add marker button. Then drag the marker all the way over the target video.

Step5 Next drag the slider under the speed tool to speed up the video according to your desire.

Step6 Lastly when done, export and save the final video.

Conclusion

Hope this article can give you an idea on how to make a good time-lapse video. It’s so fun doing it you will see how the things change that fast. Time-lapse content is typically just that, shorter, more visually interesting content, unlike most conventional video, time-lapse video can tell a story within just a few second. Start creating nice and creative time-lapse video now and make it as one content on your you tube channel.

Top 8 Sites to Download Glitch Transition for Premiere Pro

Glitch effects have made a comeback on the internet. You are free to use, download, and play with them. But the question that comes to everyone’s mind is which website is reliable for it? What are the best effects to download and use? We’ll go through 8 different websites where you can get free glitch transitions. Every website has its personality and Screen Glitchy Effects. So, let’s start looking at some of the top ones right away.

8 Best Sites to Download Glitch Transitions for Premiere Pro

1. Motion Array

You may create a variety of glitch effects with Motion Array. Adobe Premiere Pro and Adobe After Effects are among the best systems it supports. You may get some of the most excellent transitions and aesthetic effects with Adobe Premiere Pro, such as the vertical rhythmic glitchy start, geometric openers, and more.

You can make the most incredible shaky slideshow or even abstract promo slideshow. Download these fantastic effects like neon-colored glitch logos, quick glitch openers, and other bizarre effects.

2. Velosofy

Velosofy, is the next best place to download Glitch Effect for free. It features some of the most stylish effects like modern glitch intro templates, glitchy logo designs, and much more.

This site allows you to download an unlimited number of files. Other products supported by Velosofy include the well-known After Effects, Adobe Photoshop, and Premiere Pro.

3. Storyblocks

Storyblocks is the next in line. The site supports Adobe After Effects and Premiere Pro. Transitions, distortion, logo reveals, VHS, and more effects are available here. The Glitch Transition bundle includes greens and blues distortion.

Premiere Pro provides several packs containing various elements. Color Bars Data Glitches is Premiere Pro’s most impressive collection. It is a one-of-a-kind effect seen on Storyblocks, and there are plenty more like it. In addition, Storyblocks includes footage and background as well.

4. Placeit

Placeit is a website where anyone can download and use any glitch transition. Almost every application and piece of software is supported on the site. You have a long list of options on Placeit. Go ahead and select any of the numerous screen effects.

One can also make a slideshow with Placeit and its spectacular glitch effects. Add other astounding effects with a VHS feel to make the video look more impressive.

5. Adobe Stock

Adobe Stock is another excellent website that offers you free glitch transition. The site supports a variety of applications and has some incredible effects. You will like the effect that is “Simple & Bold”. As its name implies, the glitch effect is simple, yet it is highly bold because of the neon-bright colors.

Another astounding effect is 12 Glitchy Transition. The Anaglyph Glitch Effect is a photoshop effect that is perfect for video creators.

6. Motion Elements

You should never limit yourself to the basics when you have sites like Motion Elements. You may create a professional film by downloading and applying the various glitch art effects.

The site works well with multiple programs, including After Effects and Premiere Pro. It features some bizarre but entertaining templates like neon glitchy transitions.

7. MixKit

With Mixkit, you can create unique and spectacular screen glitch effects.

Mixkit supports Premiere Pro and After Effects. You can easily employ its mind-blowing color effects to give your material a whole distinct feel. It includes digital static transitions, urban glitch openers, logo animation, and other elements.

8. Videohive

Videohive has over 7000 glitch templates. Each of the 7000 effects is unique and mind-blowing.

On the other hand, Premiere Pro has some jaw-dropping aesthetic effects. You can use elegant and trendy ones like the urban opener, glitch transition, and many more on Premiere Pro. Videohive’s Trailer effect is its most attractive feature.

5 Newest Glitch Transition Packs for Premiere Pro

Are you looking to add some extra colorful movement to your movie? There are many aesthetic effects and transitions available to add to the videos. You can create high-level YouTube videos, birthday clips, and holiday vlogs with Glitch art.

We’ll help explore these transition packs in Premiere Pro. Be sure to go to the website and check out the tutorials of these packs. You’ll find various effects within them.

1. FILM CRUX Glitch Transitions Vol. 1

This new pack by Film Crux has 15 free drag-and-drop free glitch transitions. These are designed specifically for Adobe Premiere Pro. You can just download the file and drag it into your Premiere Pro ‘Presets’ folder on your computer. Add the effects and enjoy the animated video!!

2. Glitch Templates for Premiere Pro by Mixxit

Mixxit has 30 Free Premiere Pro Templates for Glitch. All these templates are free to download for Premiere Pro. You can find every type of transition you need. Edit and add textures, make the videos enjoyable with zoom and outs and different sound effects.

3. 95+ Glitch Transitions - Premiere Pro by flatpackfx

You can try any of these glitch transitions and transform your videos. Simply drag and drop your videos to use with Adobe Premiere Pro. Moviemakers and video editors can save time and create unique-looking transitions all inside of Premiere Pro.

4. FREE 30 Glitch Transitions Preset for Premiere Pro by EnamAlamin

You can make your videos exciting with these 30 animated glitch transitions. The sound effects are also available to add to the videos. You’ll find detailed tutorials on the website. You don’t need any plugins. Just Drag & Drop the movie on Premiere Pro.

5. 10 Free Glitch transitions for Premiere Pro by 911templates

You can get 10 free digital distortion effects on 911templates. Import the video on Adobe Premiere Pro and turn them into art masterpieces. These effects can help you create a stunning opening of the video and the striking transitions between shots.

With these 5 newest transition packs, you can edit your video in many ways. The film industry has been using these transitions to impact the viewers. So, choose the styles that go well with your movie and catch your eyes. These are seen commonly in horror films to keep the viewers engaged. You can even add them on TikTok videos and other product description videos.

Conclusion

Glitch Transitions is a fun way to “transition” from one shot to the other. Drag and drop any of these transitions over two or more clips on your timeline. You can insert these free transitions nicely for educational videos, YouTube videos, event movies, or even documentaries. It adds fun, energetic energy to the project.

These transitions can make your work appear more professional and add to the final movie. We hope this article can help you find free assets for your next video project.

Also read: