Updated 2024 Approved Whether Youre a Professional Animator or a Beginner Into This. If You Want to Use the OBS Studio Chroma Key, Weve Presented some Efficient Ways to Proceed. Learn More Here

Morgan Lv12

2024-04-24 01:12 2024-04-24 01:12 Created 2024-04-25 01:12 2024-04-25 01:12 Updated

ai
| animation videos

Whether You’re a Professional Animator or a Beginner Into This. If You Want to Use the OBS Studio Chroma Key, We’ve Presented some Efficient Ways to Proceed. Learn More Here

Whether you’re someone new to the world of streaming or just seeking to enhance the aesthetic of your existing stream, a green screen is a terrific way to add some quality to your broadcasts. A green screen is a terrific tool for broadcasters and video makers who wish to cover their backdrop or change it with something else completely. Once you have one, it might be tough to understand how to set up a green screen, but once you get the directions down, you’ll be able to seem like you are wherever you desire! The procedure of setting up your chroma key settings in OBS is pretty straightforward and can be done within a few minutes.

These days most live streaming software packages support chroma keying as a feature. The first thing to do with any live broadcast is to arrange your shot. Will the camera stay stationary, or will you be moving it? Once you’ve determined the shot, you can calculate approximately how much green screen you need. It’s recommended to provide for a little additional green screen around the subject to prevent having them clipped outside of the chroma keyed region. When inserting a chroma key OBS will automatically produce certain baseline settings. In most circumstances, you’ll need to fine-adjust these parameters. In this post, we’ll teach you how to accomplish this fantastic look using OBS. You should remember, however, that you will want to set up your equipment and switch on your illumination before modifying the settings in OBS Studio. This way, you won’t have to alter them again after you go live.

1. How to Add Green Screen with OBS

Learning to use chroma key in OBS allows you to remove and change backgrounds, giving your stream a Learning to utilize chroma key in OBS enables you to remove and modify backdrops, giving your broadcast a much better production quality and feel. If you are employing various backgrounds or a sequence of green things behind you. You may utilize the chroma key source more than once to remove various hues, enabling you to obtain better background removal. Not only can OBS Studio erase the backdrop of your live video streams, but you can also remove the backgrounds on pre-recorded movies and still photographs. Chroma keying has become quite popular lately. People utilize it not simply for gaming, but also in Zoom conferences, live interviews, talk shows, etc. Although it may appear hard, at first sight, setting up Chroma Key in OBS Studio is quite straightforward. Let’s look at the easy steps you need to follow to set up a green screen in OBS.

Steps to Add Green Screen with OBS

**Step 1: Install and open OBS. From your main screen, hit the “Plus” symbol situated beneath the sources box. Foremost things first, you need a green screen. If you already have one, skip this step and proceed.

A green screen is merely a backdrop of one single brilliant hue that may be taken off in post-processing. It offers a ‘canvas’ on which a topic may perform and will subsequently display with a translucent backdrop. Add it simply via your webcam.

**Step 2: Select “Video Capture Device from the available choices and then select the Filter as shown below. Name is anything you would want to keep track of your sources. Chroma keying is a visual effects method that eliminates a color backdrop from still or moving pictures and is also included as a filter in OBS.

**Step 3: If your camera is installed, it should auto-populate in the forms. If it doesn’t, or you have many cameras, choose the relevant camera manually. Select the color of your screen, then change the similarity and smoothness bars until you settle on the parameters you require. Adjustments will vary from person to person based on light, green screen quality, and the distance you are from the screen.

**Step 4: Ensure that the Video Capture Device is at the top of the Window capture scene. Use the up-down arrow to move it in the Source area after highlighting it. This will place the Video Capture Device scene at the top Save your settings when you’re done. You should be ready to start streaming.

2. Best Green Screen Video Editor to Use

Even while OBS Studio is stable and has a large variety of capabilities and tools, it may be better suitable for game recording. A program that is more comprehensive and supports video editing and chroma keying tools. This program features an easy-to-use interface and a lot more functions. You may also download films and distribute them immediately on social media or email. It provides more than simply a live streaming green screen software tool like OBS Studio. This program is more of a professional-grade green screen recorder and video editor, for both Mac and Windows platforms. Here we propose Filmora. It is a strong and excellent green screen video producer and editor with a professional touch to the animation video creating quality. Studio-quality movement used to be something only large businesses could accomplish. Today, due to Filmora, they’re easy, inexpensive, and enjoyable to produce.

Filmora features a well-designed user interface, a decent balance of control and would provide you high-quality output every time. It is better ideal for professional videographers and those who are online content creators due to its distinctive and professional appearing productions. It can handle all the contemporary video formats, including video editing and output for HD and 4K. It offers a broad selection of easy-to-use capabilities that may assist you to produce lesson films, editing action camera footage and building viral movies like those used on social networking websites, and more. If you have various shades of green, you may chroma key a source many times, each time specifying a distinct shade of green. Without any correction, merely putting on the Chroma Key filter will probably look quite horrible. But happily, there is a variety of options where you may fine-tune the chroma key removal. So, with Filmora, it is better appropriate for short films and it is giving you the most value for its pricing.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

**Step 1: Import the media document, including the Chroma Video

After the download and installation of this program, now you’re in the software interface. The next procedure is to import your media documents. To accomplish so, press the Import button on the left part of the screen as follows: In the following step, add the files to the timeline as shown above, which will also include them for your media records area.

**Step 2: Editing Video Project File

Presently as you’ve just placed that video clip within the media library of Filmora. You may also adjust the video clips using its convenient editing capabilities. To accomplish so, choose the specific video clip in the timeline and you will see the video changing options available on the interface as follows:

**Step 3:Edit the Green Screen

Inside the Filmora, once you’ve integrated the green screen video into your project. Select the Chroma key effect as shown here:

**Step 4: Export the Project

After the successful creation and modification of your preferred video outro, now is the time to export it to your desired place or immediately post it to your YouTube channel, follow the instructions below to achieve so. Click on the Export button inside the Filmora Video Editor and you will see the Export window being launched as follows:

To submit your material straight to YouTube, hit your content directly to YouTube, Hit the YouTube menu at the menu bar of this window which brings you towards the YouTube export window as follow:

Conclusion

The usage of chroma keying has been increasingly popular in recent years, with various uses of this video effect employed for live streaming. Chroma keying is used to erase the backdrop of a video clip which is then composited over another scene or picture. The most apparent usage of this technology is for weather broadcasts when the presenter is composited over the top of a weather radar picture. In more recent times we’re seeing video game broadcasters chroma keying themselves into their live feeds. There are various sites to explore for streaming backdrops. Most come as overlay packages with distinct themes. A good location to look is Filmora. Else, if you want to add a new backdrop to your broadcast, you may simply add a new picture source to your scene in OBS. So, check out what best fits you and opt for the one.

Try It Free

For macOS 10.12 or later

**Step 1: Import the media document, including the Chroma Video

**Step 2: Editing Video Project File

**Step 3:Edit the Green Screen

Inside the Filmora, once you’ve integrated the green screen video into your project. Select the Chroma key effect as shown here:

**Step 4: Export the Project

To submit your material straight to YouTube, hit your content directly to YouTube, Hit the YouTube menu at the menu bar of this window which brings you towards the YouTube export window as follow:

Conclusion

Try It Free

For macOS 10.12 or later

**Step 1: Import the media document, including the Chroma Video

**Step 2: Editing Video Project File

**Step 3:Edit the Green Screen

Inside the Filmora, once you’ve integrated the green screen video into your project. Select the Chroma key effect as shown here:

**Step 4: Export the Project

To submit your material straight to YouTube, hit your content directly to YouTube, Hit the YouTube menu at the menu bar of this window which brings you towards the YouTube export window as follow:

Conclusion

Try It Free

For macOS 10.12 or later

**Step 1: Import the media document, including the Chroma Video

**Step 2: Editing Video Project File

**Step 3:Edit the Green Screen

Inside the Filmora, once you’ve integrated the green screen video into your project. Select the Chroma key effect as shown here:

**Step 4: Export the Project

To submit your material straight to YouTube, hit your content directly to YouTube, Hit the YouTube menu at the menu bar of this window which brings you towards the YouTube export window as follow:

Conclusion

Have You Ever Tried DaVinci Resolve for Creating a Motion Blur Effect? Read This Article to Discover How to Use DaVinci Resolve Motion Blur with the Help of Detailed Instructions

Do you want to give extra details to your object’s movements in a video? Motion blur effect can instantly add a natural effect to your videos by smoothening the lines and edges. It also adds a sense of action in a video quite dramatically.

Many professionals also say that motion blur creates a passage of time by crafting vibrant streaks of colors. So, if you want to add this dynamic effect, this article will help you. By reading this article, you can learn how to add motion blur in DaVinci Resolve using efficient ways.

Part 1: What is DaVinci Resolve?

DaVinci Resolve is an all-in-one software that includes various capabilities. Using this tool, you can effortlessly add effects, filters, visual graphics, and other elements. You can also use this professional software to color-correct your video by altering saturation, hue, contrast, and brightness. With new upgrades, DaVinci provides remote collaboration using Blackmagic Cloud. This will allow you to collaborate with multiple users efficiently.

You can find different tools on different pages of DaVinci. This flexibility and wide space will help you to execute video editing effortlessly. Furthermore, you can also create customizable keyboard shortcuts to increase your overall work efficiency. Thus, its highly professional software contains a wide range of media management, organization, and editing tools.

Part 2: How to Add Motion Blur to Videos in DaVinci Resolve?

DaVinci Resolve can professionally add a motion blur effect to your videos to smoothen the look. To use the DaVinci motion blur effect, there are two efficient ways. To learn about them in detail, read this part of the section carefully.

1. On the Fusion Page

DaVinci has separate pages, like the Fusion page, for different uses. If you want to learn how to add a motion blur effect on the fusion page, check the following instructions carefully.

What is the Fusion Page in DaVinci?

On the Fusion page, you can use captivating visual effects to add a new perspective to your videos. This page consists of a diverse range of motion graphics and visual effects. You can use retouching and repairing tools from the fusion page to generate a cinematic effect quickly.

So, by merging images, effects, and animations together, you can create a vibrant effect of your own efficiently. To add DaVinci Resolve motion blur on the fusion page, here are the simple steps:

Step1 Navigate to the DaVinci Resolve tool and upload your video. Now open the fusion page and press “Shift” and “Spacebar.” On the search box, type “Motion” and select “Motion Blur” from the results. After selecting it, tap on the “Add” button.

Step2 Now, you will be able to see a nod of Motion Blur on the interface. Drag this node to the center of “Media in” and “Media Out.” By selecting the motion blur node, you can adjust the settings from the right direction.

Step3 You can also remove the Motion Blur node to create more enhancements. After removing it, you have to add a “Background” and connect it to Media in and Media out nodes. Now merge the nodes and navigate to “Settings.” From the settings, you can check the box of motion blur and change its elements like quality, shutter angle, etc.

2. In the Edit Page

The Edit page in DaVinci Resolve provides you with complete freedom to add transitions, titles, and effects to the videos. On this page, you can replace, insert, overwrite and trim the clip effectively. Moreover, you can also add 2D and 3D titles to your videos on the edit page.

If you want to add a motion blur effect on DaVinci Resolve 17, you can instantly increase your work efficiency. The reason is that on DaVinci, you would be able to directly drag the motion blur effect on the editing area. Thus, it can increase your editing speed drastically. To add DaVinci motion blur on the editing page, read the below steps:

Step1 After accessing the DaVinci Resolve, open its edit page and upload the video. Once done, go to “Effects Library” and select “Open FX.” Now from the search bar, type “Motion Blur.” Select motion blur from the results and apply it to the timeline.

Step2 On the right side, select the “Effects” tab, and then you will be able to modify the motion range, motion blur value, and other elements.

Bonus Tips – Add Motion Blur with an Alternative to DaVinci Resolve

Do you want a better tool than DaVinci Resolve motion blur? Filmora is an easy-to-use tool that has a delightful and well-designed interface. Using this tool, you can effortlessly perform flawless editing on your videos without interruption. You can transitions and effects to your video to improve their visual appeal. You can also add audio clips to the video on this platform with great ease.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Apart from advanced functioning, you can also use Filmora to execute basic functions. For instance, you can cut, trim, split, merge, and crop your videos with high precision. Moreover, you can use its stock footage to create a dynamic video from scratch. Hence, it’s a complete professional software that can change the outlook of your video efficiently.

Steps to Add Motion Blur in Wondershare Filmora

Follow the steps described below to add the motion blur to your videos if you are a beginner in the video industry:

Step1 Create a New Filmora Project

After launching Filmora, hit the “Create New Project” button to open a new interface. On the project media, upload your desired media file and then drag it to the timeline.

Step2 Choose the Motion Blur Effect

Now go to the “Effects” tab and select the “Video Effects” category from the left panel. Now you will have to type “Blur” in the search bar to get all the blur effects of Filmora. Select your option and apply the effect to the timeline.

Step3 Add the Dissolve Transition

You can also add a transition known as “Dissolve” by searching for it in the “Transitions” tab to smoothen your video. You can see the final results in the preview window.

Conclusion

Have you ever added a motion blur effect to your videos? If you are unaware of how to create a professional motion blur effect, this article can provide you with complete guidance. In this article, we have used DaVinci Resolve to flawlessly add a motion blur effect. However, if you find the interface of DaVinci Resolve motion blur complicated, you can try its best alternative, Wondershare Filmora.

Free Download For macOS 10.14 or later

Steps to Add Motion Blur in Wondershare Filmora

Follow the steps described below to add the motion blur to your videos if you are a beginner in the video industry:

Step1 Create a New Filmora Project

After launching Filmora, hit the “Create New Project” button to open a new interface. On the project media, upload your desired media file and then drag it to the timeline.

Step2 Choose the Motion Blur Effect

Step3 Add the Dissolve Transition

You can also add a transition known as “Dissolve” by searching for it in the “Transitions” tab to smoothen your video. You can see the final results in the preview window.

Conclusion

Powerpoint Supported Video Format and Advanced User Tips

It doesn’t matter if you are a student or a working person; you must have made a PowerPoint presentation in your life. It can be a business presentation, educational presentation, or any work-related presentation if you are an employee. The types of presentation may vary, but the way to make a presentation is almost the same.

We are here to share a few tips and tricks to make your presentations unique like, you can add videos, voice-overs, and much more things. Remember one thing; there are certain video formats that PowerPoint supports. The video formats for PowerPoint presentations are discussed below, read ahead, and you’ll know more about them.

Part 1. Overview of PowerPoint Supported Video Format

The supported video formats for PowerPoint are different for both Windows and macOS. All the supported formats for both types of the operating system are discussed below individually:

Windows

ASF: Advanced System Format (ASF) is a proprietary video and audio container format. It is an extensible file format design.

AVI: AVI is an Audio Video Interleave file. It is a multimedia container format made by Microsoft. It allows synchronous audio with video playback.

MP4, M4V, MOV: MPEG-4 file format is also known as MP4 or M4V. It is a common video file format. In comparison, MOV is developed by Apple Inc. It is the same as MP4 but is made for Apple devices.

MPEG, MPG: It is a famous file format for movies that are distributed over the internet. They use specific compression that makes downloading and steaming easy and fast.

WMV: WMV was introduced by Microsoft, and it stands for Windows Media Video. It is a compressed file container. The format is based on ASF.

macOS

AVI, VFW: AVI stands for Audio Video Interleave, and VFW stands for Video for Windows. Both are multimedia container files. AVI is encoded into VFW.

MP4, MPEG-4: MP4 is a digital video file format. MPEG-4 uses compression, but it is less common than the MP4 extension. MPEG encodes audio tracks.

M4V: It is a video container format developed by Apple Inc. It is similar to MP4. MV4 is used to encode video files in iTunes.

MPG, MPEG, MPE, M75, M15: MPG, MPEG, MPE, M75, and M15 are all the different types of formats developed by the Moving Pictures Expert Group.

M2V: It contains only video data and no other files. It is encoded by using MPEG-2 compression. It is mostly used by DVD authorized applications.

TS: It is a Video Transport Stream file and is used to store MPEG-2 compressed video data. It is used by digital broadcasting systems.

MOV, QT: QT and MOV both were developed by Apple Inc. Both the formats can hold multiple types of multimedia formats (audio, video, and subtitles).

DIF: DIF stands for Data Interchange Format. It is a text-based file format and is used for tabular and spreadsheet data. It is also used to transfer data between spreadsheets.

Part 2. How to Insert or Embed Video in PowerPoint?

PowerPoint is the simplest way to make a presentation. You might impress your boss with a good presentation. Do you ever consider adding videos from your computer across your slides? Have you ever embedded a video in PowerPoint? Allow us to help you out with this. The process to insert or embed a video in PowerPoint is not difficult; you can do this in a few simple steps.

How to Insert a Video in PowerPoint

The video format for PowerPoint differs for different versions. The steps to insert a video in PowerPoint do not deviate much. You can follow the following instructions and insert the video:

Step 1: First, you need to select the slide in which the video is supposed to be inserted. Select the video from the device you are using by heading to the ‘Insert’ tab. There, look for the ‘Video’ option and click on it to select the ‘This Device’ option.

Step 2: After you have located and selected the video, click on ‘Insert.’ Adjust the video settings from the ‘Format’ and ‘Playback’ toolbar according to your needs. You can resize the video, add effects, play full screen, etc.

Step 3: After all the settings are done, you need to preview the slideshow to check if the video is playing according to your desire or not.

How to Embed a Video in PowerPoint

If you are looking to add an online video across PowerPoint, the platform allows you to either embed its code or use its URL for adding it within your slides. To follow this, look into the steps featured below.

Step 1: Access the online video across your browser that you wish to embed in your PowerPoint slides. You can either copy its embed code or simply copy its URL. However, this video can only be from YouTube, SlideShare, Vimeo, Stream, or Flipgrid, as allowed by PowerPoint.

Step 2: Once copied, open your slides, and navigate to the “Insert” panel. Select “Video” from the available options and proceed to click on “Online Videos.”

Step 3: A new window opens up. Paste the copied code or URL across the provided space and tap “Insert” to add the online video across your slides. You can enhance the video across the “Video Format” and “Playback” sections.

Part 3. How to Turn Your Presentation into A Video with PowerPoint?

Inserting videos in PowerPoint presentations is normal; now, it’s time to discover something new. Have you ever thought of making a PowerPoint presentation a video itself? It is interesting! Your superior authority might get impressed and give you a promotion; who knows.

How to save your presentation as a video in PowerPoint? It can be done in a few simple steps. These steps are concisely discussed in the section below; follow to help yourself.

Step 1: You need to save the presentation that you made at first. After saving the original file, you need to click on ‘Export’ from the main menu.

Step 2: From the ‘Export’ menu, click on the ‘Create Video’ option. Select the video quality as per your needs. You can use pre-recorded narrations with the timings. In case no recorded narrations exist, you can record your own.

Step 3: The recorded narration will play over your video. If you don’t want narrations, you can simply skip these settings and move on.

Step 4: Next step is to select how much time a single slide will be shown. Keep in mind the longest slide; select an appropriate time so that all the material in the slides can be read easily.

Step 5: Now, moving towards the final step, click on ‘Create Video.’ This will generate and save the new PowerPoint video on your respective device.

Part 4. How to Match Color and Remove Image Background in PowerPoint?

There are two different things that you can do to make your presentation better. These are distinctive concerning video format for PowerPoint. Removal of background in PowerPoint is discussed, followed by Color Matching.

Remove Image Background

A simple way to remove background in PowerPoint is discussed in the following steps, read them for further assistance:

Step 1: Start by opening the PowerPoint software. Afterward, move to the ‘Insert’ tab and hit the ‘Pictures’ option to insert the image you plan to work with. As you click the photo, the ‘Picture Format’ tab will appear on the taskbar. Select the ‘Remove Background’ option on the left-most side below the taskbar.

Step 2: When you click ‘Remove Background,’ it will give options. Select the ‘Mark Areas to Keep’ option and draw the section that you want to save. You can also select the option ‘Mark Areas to Remove.’ It depends on the type of photo on which the task is being performed.

Step 3: Once all the necessary editing is done, click on the option ‘Keep Changes.’ You can save the image separately by clicking on ‘Save as Picture.’

Match Color in PowerPoint

Eyedropper helps you to match colors in your presentation. This takes a few clicks, and you have done color matching.

Step 1: For this, you need to open PowerPoint and select the image that you want to match the color of its background with the rest of the slide. Navigate to the “Design” panel and select the “Format Background” option.

Step 2: Click on ‘Drawing tool’ from the ribbon. Select the option of ‘Solid Fill’ from the menu bar at the top of the screen. Now, from ‘Solid Fill,’ move the mouse towards the ‘Eyedropper’ option. Tap on the background color that you wish to match within the background.

Step 3: Select the area that you want to change the background to its desired color. Access the option of “Solid Fill” after selecting the appropriate section of the document and select the color from the preview window present in the recent colors.

Closing Words

After reading the above article, you will be able to make incredible PowerPoint presentations. As videos add great information to your presentation so hence, we discussed in detail various video formats for PowerPoint. Now let’s share something new.

Do you know anything about Wondershare Filmora ? The software is a video editor with tons of great features and functionalities. You can create stunning videos with Filmora and its wide list of features. The video editor lets you trim, join, cut, split, and do much more than this. You get so many different effects, transitions, and elements with Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Insert or Embed Video in PowerPoint?

03 How to Turn Your Presentation into A Video with PowerPoint?

04 How to Match Color and Remove Image Background in PowerPoint?