Frame Rates, Speed, and Wondershare Filmora

Ensuring smoother playback along with enhanced fluidity is a crucial part of boosting the engagement of videos. You also need to add the slow-motion effect at some points in videos. Along with this, syncing audio to video is also essential. Thus, you can take assistance from frame rates and speed to ensure you have these key features in the videos.

There is no need to be concerned about what video editor to choose because Wondershare Filmora can help you with this issue. In this article, you will find basic information about Filmora and the uses of frame rate and speed ramping. We will also provide the procedure for changing video frame rates with Filmora.

• Part 1: What is Frame Rate and How Important It Is In Videos?
• Part 2: What Are The Different Uses of Speed Ramping in Video Editing?
• Part 3: Perform Basic Speed Adjustments and Speed Ramping on Wondershare Filmora
• Part 4: [Basic] How to Change The Frame Rate in Wondershare Filmora?
• Conclusion

Part 1: What is Frame Rate and How Important It Is In Videos?

One of the most important metrics in videos is the frame rate. This term refers to the individual frames present in the video. While the frame represents a single second, this defines the frequency of the video. This is the display of consecutive frames every second, which brings up the illusion of motion for the viewers. In this way, the entire frame rate is explained as terminology to users new to video editing.

Importance of Frame Rate in Videos

We will highlight some prominent points explaining the importance of video frame rates. Continuing with these points, this will help users understand how essential video frame rate is:

01of 04Defines Smoothness in Videos

Having a higher frame rate in a video is equivalent to a smooth video. Users who consider having smoothness in their videos always consider the frame rates. Higher frame rates have better transitions and seamless motion.

02of 04The detail in the Video

If you have a low frame rate in your video, you cannot observe the details in the fast-moving objects. In such a scenario, you need to have a video with a good frame rate. This will help display the explicit details of the video, which cannot be viewed under every frame rate quality.

03of 04Realistic Effects

Old videos never had the kick that made them feel real. Videos with higher frame rates have changed the dynamics in the current system. Realism and immersive video experience are prominent getaways achieved with better frame rates.

04of 04Realistic Effects

The use of better frame rates gives the option of improving the effects of the video. Videos that did not have impressive frame rates are not able to display the mood or atmosphere. Better frame rates help display the environment better, thus explaining the importance.

Changing Video Frame Rates And Speed Editor A wonderful video editor - Wondershare Filmora providing frame rate and speed ramping features for all creators.

Free Download Free Download Learn More

Part 2: What Are The Different Uses of Speed Ramping in Video Editing?

Speed ramping and video frame rate are one of the most known techniques which are widely used in video editing. You must be wondering why paying attention to speed ramping is so important. Nothing to worry about because this part will give you the most implementable uses of speed ramping in video editing. Have a look below to discover further information about this:

Highlighting Actions and Dramas

You can use speed ramping to emphasize the actional and dramatic sequences. It also helps you draw the audience’s attention and make the essential factors more notable. Above all, the speed ramping also integrates the useable effects which can add a drastic touch of drama to your videos,

Transitions and Motion Tracking

With the good use of speed ramping, you can achieve a smooth transition in videos. It also helps you add seamless transitions in the videos to add a sense of consistency. One of the best things is adding slow-motion and motion-tracking effects in simple videos.

Syncing Audios

Syncing the audio beats with videos is crucial to enhance the user experience. Speed ramping offers capabilities through which you can easily sync the audio to the length of videos. As it never compromises the content or layout of videos, you don’t have to worry about anything.

Emphasized Storytelling

If you need to induce a sense of storytelling and optimize the video quality, consider speed ramping. You can control the overall speed of actions and dramas and convey a particular narrative to add depth to videos. It also helps to increase the frame rate of video.

Part 3: Perform Basic Speed Adjustments and Speed Ramping on Wondershare Filmora

Wondershare Filmora is a great video editor providing exquisite features and details to users. It embeds simple video editing tools and AI functionalities to provide a quick editing experience. However, the focus on the details is not lacking in this tool. Filmora provides a comprehensive set of effects, transitions, and elements to induce in videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Along with that, it also includes multiple functionalities which cannot be observed in many video editors. However, since we are putting our focus on discussing the speed adjustments in Filmora, let’s look at the comprehensive steps explained below:

• Method 1: Uniform Speed Adjustments in Videos
• Method 2: Utilize the Option of Speed Ramping

Method 1: Uniform Speed Adjustments in Videos

Step 1Import Video on Filmora for Speed Adjustments

Firstly, launch Wondershare Filmora on your computer and continue to open a new project. Once a window enters the display, lead into the “Import” section for importing the media files that need adjustment.

Step 2Select the Speed Option

After adding the videos and dragging them to the timeline, continue to locate the “Speed “ option in the bar above the timeline. This opens a drop-down menu where you have to select “Uniform Speed” or use “Ctrl + R.”

Step 3Manage Speed Uniformly

A new section opens on the video editor where you can define the speed using the slider. Also, you can activate options like “Reverse Speed,” “Ripple Edit,” and “Maintain Pitch,” if needed.

Method 2: Utilize the Option of Speed Ramping

Step 1Access Speed Ramping Option

Once you have opened Filmora and imported a video on the timeline, lead to the “Speed” button again. Select the option of “Speed Ramping ” in the drop-down to continue.

Step 2Manage Speed Ramping of Video

As you find a new screen on your front, select the type of Speed Ramping you want to perform. Adjust the speed ramp on the line graph that comes in display and click “OK” to conclude.

Step 3Export the Final Video

Once you are done editing your videos, lead to the “Export” button to save the videos on the device.

Part 4: [Basic] How to Change The Frame Rate in Wondershare Filmora?

While you find out the ways to change the speed of your videos, you can also change their frame rate. Filmora offers dedicated options on its platform to its users, which can be understood in the steps below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Open Settings For Changing Frame Rate

As you open Filmora and import a video, drag it to the timeline. Once the video is imported, lead to the “Preview quality and display settings” button on the right side of the screen.

Step 2Manage Speed Ramping of Video

This opens a drop-down menu where you have to select the option “Change Project Aspect Ratio.”

Step 3Change Frame Rate Successfully

You will be led to a new screen where you can find the option of “Frame Rate” in the list. Change the frame rate according to the requirements and options available and click “OK.” The frame rate of your video will be changed using Filmora.

Conclusion

This article has displayed a conspicuous detail of what the frame rate in the video is and how it implicates video editing. Wondershare Filmora has been observed as the perfect way to manage the speeds of videos. Video frame rates can also be managed using the exquisite video editor. Those who wish to manage such features of the videos should consider using this tool.

Part 1: What is Frame Rate and How Important It Is In Videos?

One of the most important metrics in videos is the frame rate. This term refers to the individual frames present in the video. While the frame represents a single second, this defines the frequency of the video. This is the display of consecutive frames every second, which brings up the illusion of motion for the viewers. In this way, the entire frame rate is explained as terminology to users new to video editing.

Importance of Frame Rate in Videos

We will highlight some prominent points explaining the importance of video frame rates. Continuing with these points, this will help users understand how essential video frame rate is:

01of 04Defines Smoothness in Videos

Having a higher frame rate in a video is equivalent to a smooth video. Users who consider having smoothness in their videos always consider the frame rates. Higher frame rates have better transitions and seamless motion.

02of 04The detail in the Video

If you have a low frame rate in your video, you cannot observe the details in the fast-moving objects. In such a scenario, you need to have a video with a good frame rate. This will help display the explicit details of the video, which cannot be viewed under every frame rate quality.

03of 04Realistic Effects

Old videos never had the kick that made them feel real. Videos with higher frame rates have changed the dynamics in the current system. Realism and immersive video experience are prominent getaways achieved with better frame rates.

04of 04Realistic Effects

The use of better frame rates gives the option of improving the effects of the video. Videos that did not have impressive frame rates are not able to display the mood or atmosphere. Better frame rates help display the environment better, thus explaining the importance.

Changing Video Frame Rates And Speed Editor A wonderful video editor - Wondershare Filmora providing frame rate and speed ramping features for all creators.

Free Download Free Download Learn More

Part 2: What Are The Different Uses of Speed Ramping in Video Editing?

Speed ramping and video frame rate are one of the most known techniques which are widely used in video editing. You must be wondering why paying attention to speed ramping is so important. Nothing to worry about because this part will give you the most implementable uses of speed ramping in video editing. Have a look below to discover further information about this:

Highlighting Actions and Dramas

You can use speed ramping to emphasize the actional and dramatic sequences. It also helps you draw the audience’s attention and make the essential factors more notable. Above all, the speed ramping also integrates the useable effects which can add a drastic touch of drama to your videos,

Transitions and Motion Tracking

With the good use of speed ramping, you can achieve a smooth transition in videos. It also helps you add seamless transitions in the videos to add a sense of consistency. One of the best things is adding slow-motion and motion-tracking effects in simple videos.

Syncing Audios

Syncing the audio beats with videos is crucial to enhance the user experience. Speed ramping offers capabilities through which you can easily sync the audio to the length of videos. As it never compromises the content or layout of videos, you don’t have to worry about anything.

Emphasized Storytelling

If you need to induce a sense of storytelling and optimize the video quality, consider speed ramping. You can control the overall speed of actions and dramas and convey a particular narrative to add depth to videos. It also helps to increase the frame rate of video.

Part 3: Perform Basic Speed Adjustments and Speed Ramping on Wondershare Filmora

Wondershare Filmora is a great video editor providing exquisite features and details to users. It embeds simple video editing tools and AI functionalities to provide a quick editing experience. However, the focus on the details is not lacking in this tool. Filmora provides a comprehensive set of effects, transitions, and elements to induce in videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Along with that, it also includes multiple functionalities which cannot be observed in many video editors. However, since we are putting our focus on discussing the speed adjustments in Filmora, let’s look at the comprehensive steps explained below:

• Method 1: Uniform Speed Adjustments in Videos
• Method 2: Utilize the Option of Speed Ramping

Method 1: Uniform Speed Adjustments in Videos

Step 1Import Video on Filmora for Speed Adjustments

Firstly, launch Wondershare Filmora on your computer and continue to open a new project. Once a window enters the display, lead into the “Import” section for importing the media files that need adjustment.

Step 2Select the Speed Option

After adding the videos and dragging them to the timeline, continue to locate the “Speed “ option in the bar above the timeline. This opens a drop-down menu where you have to select “Uniform Speed” or use “Ctrl + R.”

Step 3Manage Speed Uniformly

A new section opens on the video editor where you can define the speed using the slider. Also, you can activate options like “Reverse Speed,” “Ripple Edit,” and “Maintain Pitch,” if needed.

Method 2: Utilize the Option of Speed Ramping

Step 1Access Speed Ramping Option

Once you have opened Filmora and imported a video on the timeline, lead to the “Speed” button again. Select the option of “Speed Ramping ” in the drop-down to continue.

Step 2Manage Speed Ramping of Video

As you find a new screen on your front, select the type of Speed Ramping you want to perform. Adjust the speed ramp on the line graph that comes in display and click “OK” to conclude.

Step 3Export the Final Video

Once you are done editing your videos, lead to the “Export” button to save the videos on the device.

Part 4: [Basic] How to Change The Frame Rate in Wondershare Filmora?

While you find out the ways to change the speed of your videos, you can also change their frame rate. Filmora offers dedicated options on its platform to its users, which can be understood in the steps below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Open Settings For Changing Frame Rate

As you open Filmora and import a video, drag it to the timeline. Once the video is imported, lead to the “Preview quality and display settings” button on the right side of the screen.

Step 2Manage Speed Ramping of Video

This opens a drop-down menu where you have to select the option “Change Project Aspect Ratio.”

Step 3Change Frame Rate Successfully

You will be led to a new screen where you can find the option of “Frame Rate” in the list. Change the frame rate according to the requirements and options available and click “OK.” The frame rate of your video will be changed using Filmora.

Conclusion

This article has displayed a conspicuous detail of what the frame rate in the video is and how it implicates video editing. Wondershare Filmora has been observed as the perfect way to manage the speeds of videos. Video frame rates can also be managed using the exquisite video editor. Those who wish to manage such features of the videos should consider using this tool.

Part 1: What is Frame Rate and How Important It Is In Videos?

One of the most important metrics in videos is the frame rate. This term refers to the individual frames present in the video. While the frame represents a single second, this defines the frequency of the video. This is the display of consecutive frames every second, which brings up the illusion of motion for the viewers. In this way, the entire frame rate is explained as terminology to users new to video editing.

Importance of Frame Rate in Videos

We will highlight some prominent points explaining the importance of video frame rates. Continuing with these points, this will help users understand how essential video frame rate is:

01of 04Defines Smoothness in Videos

Having a higher frame rate in a video is equivalent to a smooth video. Users who consider having smoothness in their videos always consider the frame rates. Higher frame rates have better transitions and seamless motion.

02of 04The detail in the Video

If you have a low frame rate in your video, you cannot observe the details in the fast-moving objects. In such a scenario, you need to have a video with a good frame rate. This will help display the explicit details of the video, which cannot be viewed under every frame rate quality.

03of 04Realistic Effects

Old videos never had the kick that made them feel real. Videos with higher frame rates have changed the dynamics in the current system. Realism and immersive video experience are prominent getaways achieved with better frame rates.

04of 04Realistic Effects

The use of better frame rates gives the option of improving the effects of the video. Videos that did not have impressive frame rates are not able to display the mood or atmosphere. Better frame rates help display the environment better, thus explaining the importance.

Changing Video Frame Rates And Speed Editor A wonderful video editor - Wondershare Filmora providing frame rate and speed ramping features for all creators.

Free Download Free Download Learn More

Part 2: What Are The Different Uses of Speed Ramping in Video Editing?

Speed ramping and video frame rate are one of the most known techniques which are widely used in video editing. You must be wondering why paying attention to speed ramping is so important. Nothing to worry about because this part will give you the most implementable uses of speed ramping in video editing. Have a look below to discover further information about this:

Highlighting Actions and Dramas

You can use speed ramping to emphasize the actional and dramatic sequences. It also helps you draw the audience’s attention and make the essential factors more notable. Above all, the speed ramping also integrates the useable effects which can add a drastic touch of drama to your videos,

Transitions and Motion Tracking

With the good use of speed ramping, you can achieve a smooth transition in videos. It also helps you add seamless transitions in the videos to add a sense of consistency. One of the best things is adding slow-motion and motion-tracking effects in simple videos.

Syncing Audios

Syncing the audio beats with videos is crucial to enhance the user experience. Speed ramping offers capabilities through which you can easily sync the audio to the length of videos. As it never compromises the content or layout of videos, you don’t have to worry about anything.

Emphasized Storytelling

If you need to induce a sense of storytelling and optimize the video quality, consider speed ramping. You can control the overall speed of actions and dramas and convey a particular narrative to add depth to videos. It also helps to increase the frame rate of video.

Part 3: Perform Basic Speed Adjustments and Speed Ramping on Wondershare Filmora

Wondershare Filmora is a great video editor providing exquisite features and details to users. It embeds simple video editing tools and AI functionalities to provide a quick editing experience. However, the focus on the details is not lacking in this tool. Filmora provides a comprehensive set of effects, transitions, and elements to induce in videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Along with that, it also includes multiple functionalities which cannot be observed in many video editors. However, since we are putting our focus on discussing the speed adjustments in Filmora, let’s look at the comprehensive steps explained below:

• Method 1: Uniform Speed Adjustments in Videos
• Method 2: Utilize the Option of Speed Ramping

Method 1: Uniform Speed Adjustments in Videos

Step 1Import Video on Filmora for Speed Adjustments

Firstly, launch Wondershare Filmora on your computer and continue to open a new project. Once a window enters the display, lead into the “Import” section for importing the media files that need adjustment.

Step 2Select the Speed Option

After adding the videos and dragging them to the timeline, continue to locate the “Speed “ option in the bar above the timeline. This opens a drop-down menu where you have to select “Uniform Speed” or use “Ctrl + R.”

Step 3Manage Speed Uniformly

A new section opens on the video editor where you can define the speed using the slider. Also, you can activate options like “Reverse Speed,” “Ripple Edit,” and “Maintain Pitch,” if needed.

Method 2: Utilize the Option of Speed Ramping

Step 1Access Speed Ramping Option

Once you have opened Filmora and imported a video on the timeline, lead to the “Speed” button again. Select the option of “Speed Ramping ” in the drop-down to continue.

Step 2Manage Speed Ramping of Video

As you find a new screen on your front, select the type of Speed Ramping you want to perform. Adjust the speed ramp on the line graph that comes in display and click “OK” to conclude.

Step 3Export the Final Video

Once you are done editing your videos, lead to the “Export” button to save the videos on the device.

Part 4: [Basic] How to Change The Frame Rate in Wondershare Filmora?

While you find out the ways to change the speed of your videos, you can also change their frame rate. Filmora offers dedicated options on its platform to its users, which can be understood in the steps below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Open Settings For Changing Frame Rate

As you open Filmora and import a video, drag it to the timeline. Once the video is imported, lead to the “Preview quality and display settings” button on the right side of the screen.

Step 2Manage Speed Ramping of Video

This opens a drop-down menu where you have to select the option “Change Project Aspect Ratio.”

Step 3Change Frame Rate Successfully

You will be led to a new screen where you can find the option of “Frame Rate” in the list. Change the frame rate according to the requirements and options available and click “OK.” The frame rate of your video will be changed using Filmora.

Conclusion

This article has displayed a conspicuous detail of what the frame rate in the video is and how it implicates video editing. Wondershare Filmora has been observed as the perfect way to manage the speeds of videos. Video frame rates can also be managed using the exquisite video editor. Those who wish to manage such features of the videos should consider using this tool.

Part 1: What is Frame Rate and How Important It Is In Videos?

One of the most important metrics in videos is the frame rate. This term refers to the individual frames present in the video. While the frame represents a single second, this defines the frequency of the video. This is the display of consecutive frames every second, which brings up the illusion of motion for the viewers. In this way, the entire frame rate is explained as terminology to users new to video editing.

Importance of Frame Rate in Videos

We will highlight some prominent points explaining the importance of video frame rates. Continuing with these points, this will help users understand how essential video frame rate is:

01of 04Defines Smoothness in Videos

Having a higher frame rate in a video is equivalent to a smooth video. Users who consider having smoothness in their videos always consider the frame rates. Higher frame rates have better transitions and seamless motion.

02of 04The detail in the Video

If you have a low frame rate in your video, you cannot observe the details in the fast-moving objects. In such a scenario, you need to have a video with a good frame rate. This will help display the explicit details of the video, which cannot be viewed under every frame rate quality.

03of 04Realistic Effects

Old videos never had the kick that made them feel real. Videos with higher frame rates have changed the dynamics in the current system. Realism and immersive video experience are prominent getaways achieved with better frame rates.

04of 04Realistic Effects

The use of better frame rates gives the option of improving the effects of the video. Videos that did not have impressive frame rates are not able to display the mood or atmosphere. Better frame rates help display the environment better, thus explaining the importance.

Changing Video Frame Rates And Speed Editor A wonderful video editor - Wondershare Filmora providing frame rate and speed ramping features for all creators.

Free Download Free Download Learn More

Part 2: What Are The Different Uses of Speed Ramping in Video Editing?

Speed ramping and video frame rate are one of the most known techniques which are widely used in video editing. You must be wondering why paying attention to speed ramping is so important. Nothing to worry about because this part will give you the most implementable uses of speed ramping in video editing. Have a look below to discover further information about this:

Highlighting Actions and Dramas

You can use speed ramping to emphasize the actional and dramatic sequences. It also helps you draw the audience’s attention and make the essential factors more notable. Above all, the speed ramping also integrates the useable effects which can add a drastic touch of drama to your videos,

Transitions and Motion Tracking

With the good use of speed ramping, you can achieve a smooth transition in videos. It also helps you add seamless transitions in the videos to add a sense of consistency. One of the best things is adding slow-motion and motion-tracking effects in simple videos.

Syncing Audios

Syncing the audio beats with videos is crucial to enhance the user experience. Speed ramping offers capabilities through which you can easily sync the audio to the length of videos. As it never compromises the content or layout of videos, you don’t have to worry about anything.

Emphasized Storytelling

If you need to induce a sense of storytelling and optimize the video quality, consider speed ramping. You can control the overall speed of actions and dramas and convey a particular narrative to add depth to videos. It also helps to increase the frame rate of video.

Part 3: Perform Basic Speed Adjustments and Speed Ramping on Wondershare Filmora

Wondershare Filmora is a great video editor providing exquisite features and details to users. It embeds simple video editing tools and AI functionalities to provide a quick editing experience. However, the focus on the details is not lacking in this tool. Filmora provides a comprehensive set of effects, transitions, and elements to induce in videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Along with that, it also includes multiple functionalities which cannot be observed in many video editors. However, since we are putting our focus on discussing the speed adjustments in Filmora, let’s look at the comprehensive steps explained below:

• Method 1: Uniform Speed Adjustments in Videos
• Method 2: Utilize the Option of Speed Ramping

Method 1: Uniform Speed Adjustments in Videos

Step 1Import Video on Filmora for Speed Adjustments

Firstly, launch Wondershare Filmora on your computer and continue to open a new project. Once a window enters the display, lead into the “Import” section for importing the media files that need adjustment.

Step 2Select the Speed Option

After adding the videos and dragging them to the timeline, continue to locate the “Speed “ option in the bar above the timeline. This opens a drop-down menu where you have to select “Uniform Speed” or use “Ctrl + R.”

Step 3Manage Speed Uniformly

A new section opens on the video editor where you can define the speed using the slider. Also, you can activate options like “Reverse Speed,” “Ripple Edit,” and “Maintain Pitch,” if needed.

Method 2: Utilize the Option of Speed Ramping

Step 1Access Speed Ramping Option

Once you have opened Filmora and imported a video on the timeline, lead to the “Speed” button again. Select the option of “Speed Ramping ” in the drop-down to continue.

Step 2Manage Speed Ramping of Video

As you find a new screen on your front, select the type of Speed Ramping you want to perform. Adjust the speed ramp on the line graph that comes in display and click “OK” to conclude.

Step 3Export the Final Video

Once you are done editing your videos, lead to the “Export” button to save the videos on the device.

Part 4: [Basic] How to Change The Frame Rate in Wondershare Filmora?

While you find out the ways to change the speed of your videos, you can also change their frame rate. Filmora offers dedicated options on its platform to its users, which can be understood in the steps below:

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step 1Open Settings For Changing Frame Rate

As you open Filmora and import a video, drag it to the timeline. Once the video is imported, lead to the “Preview quality and display settings” button on the right side of the screen.

Step 2Manage Speed Ramping of Video

This opens a drop-down menu where you have to select the option “Change Project Aspect Ratio.”

Step 3Change Frame Rate Successfully

You will be led to a new screen where you can find the option of “Frame Rate” in the list. Change the frame rate according to the requirements and options available and click “OK.” The frame rate of your video will be changed using Filmora.

Conclusion

This article has displayed a conspicuous detail of what the frame rate in the video is and how it implicates video editing. Wondershare Filmora has been observed as the perfect way to manage the speeds of videos. Video frame rates can also be managed using the exquisite video editor. Those who wish to manage such features of the videos should consider using this tool.

What Is the Best Frame Rate for 4K Videos?

People in the videography ad filmmaking world use complicated terminology like Ultra High Def to describe 4K videos. Even though you are not a complete stranger to the term 4K, you might still be unaware of what it means.

In a nutshell, 4K is the highest resolution you can watch your movies and videos. The details are incredibly crisp, meaning you can see pimples or the pores on an actor’s face through the screen. However, the frame rate will significantly affect how you enjoy a 4K video. Therefore, it would be wise to learn how to choose the ideal frame rate to suit your needs.

Keep reading this article to learn more about frame rates and which is suitable for a 4K video.

How Do Frame Rates Affect Video Viewing?

The motion will appear smoother if your video contains more frames per second. Even though your viewers are not tech-savvy, they will definitely notice the difference.

Consider a video of a duck drinking water from a pond. If you film and playback the same video in 24, 30, and 60fps, you will see a noticeable difference, assuming your shutter speed is set according to the 180-degree shutter rule.

If you are filming quicker motions of wildlife and birds, you are better off sticking to higher resolutions to give the viewer a pleasant experience and ensure the motion is fluid.

On the other hand, lower frame rates like 24fps are ideal for human movements, which are not as smooth as wildlife. Suppose you used 60fps for a cinematic film or a TV show. The video would look a bit odd because that is not how we see things in the natural world. In addition, your viewers aren’t used to such smoothness.

Viewing Requirements of 4K Videos

You may have heard about 4K videos and wondered what people mean by that term. In simple terms, a 4K video is a high-resolution video that is four times the usual 1080p HD video. When it comes to 4K videos, there are two standard resolutions. One of them is the standard for Digital Cinema which is 4096*2160 pixels. The other is for television and is 3840*2160 pixels.

To stream 4K content, you need a bandwidth between 10 and 20 Mbps. On the other hand, streaming platforms like Netflix require higher bandwidths of not less than 15 Mbps. In addition to the bandwidth we mentioned earlier, you need a 4KTV or 4K monitor.

This specification was brought up at the UHD Alliance, a union of more than 50 tech companies working together to support 4K content. Tech companies ought to ensure the devices they produce are compatible with 4K videos, which are becoming increasingly popular.

Below is a list of requirements any electronic device should fulfill before being termed a 4KTV or 4K monitor.

• A resolution of not less than 3840*2160.
• A 10-bit color depth that allows for 1,024 shades of red, yellow, and blue.
• A high dynamic range for color accuracy.
• An excellent combination of black level and peak brightness. The peak brightness should not exceed 1,000 nits, and the black level shouldn’t go below 0.5 nits. Alternatively, the peak brightness shouldn’t exceed 540 nits; neither should the black level plummet below 0.0005 nits.

Best Frame Rate for 4K Video

We all know that the frame rate you choose for your video will significantly impact the viewer’s experience and the overall style of your video. The frame rate will also affect how the video looks. For instance, a frame rate lower than 24fps will make your video look unprofessional and of poor quality. The content will also flicker because there aren’t many still images per second.

On the other hand, a lower FPS causes the file size to be smaller, causing it to consume a lower bandwidth. The vice versa is also true. Now that you understand these facts, you might wonder which frame rate would be best for your 4K videos.

Research reveals that the most acceptable frame rate is 30fps and 60fps. This is because the motion will appear natural to the human eye without being too fast or unrealistic.

If you are wondering what is the best frame rate for 4k videos, we urge you to select 60fps because it contains more detail. The higher frame rate also makes the motion look very smooth and crisp. Perhaps you want to shoot a slow-motion video. In that case, an even higher frame rate of 120fps would be ideal.

How To Choose The Base Frame Rates for Your Next Video

Choosing a frame rate for your videos is not complicated. However, it is not a straightforward process either. There are numerous moving parts that ought to work harmoniously for your video to turn out perfect and guarantee your audience will have a pleasant viewing experience. Before we dive into choosing the best frame rate for your 4K videos, let’s help you understand the filmmaking process.

Most filmmakers and videographers see it fit to shoot videos in 120p or 4K. This step makes their work easier during the editing process. If the raw footage is in 4K, they can de-emphasize or retain specific plot points that would look great in the final video. However, not everyone is shooting a video for Hollywood. Therefore, shooting in 4K on your laptop for your YouTube channel might be difficult.

Below are some factors you should consider when choosing the best frame rate for a 4k video.

File size

Shooting your video at a higher frame rate means more still images are packed into a single second of the video. Therefore, you will end up with a larger file size. If you want to shoot a video for your YouTube channel, it would be wise to stick to a smaller frame rate.

Purpose

It wouldn’t make sense to shoot a talking head video at more than 24fps. However, a higher frame rate would be ideal for a travel vlog, where the details need to be crisp.

Medium of delivery

The standard frame rate for television is 24fps. On the other hand, it would be best to stick to a higher frame rate of 60fps if you intend to shoot content for the silver screen.

Motion in the video

Lastly, the movement within the video will play a massive role in the frame rate you choose. The faster the motion, the higher the frame rate needs to be. For instance, action movies don’t do well in frame rates of less than 60 fps.

How To Set the Frame Rate of Your Editing Tools

Even though you didn’t use the ideal frame rate for 4k video during filming, you could use an editing tool to tweak the frame rate to where you need it to be. In our opinion, Wondershare Filmora is an excellent editing tool to set the ideal frame rate and take your videos to the next level.

Wondershare Filmora is a feature-rich platform that takes the tedium out of editing your videos and makes the outcome look spectacular. People won’t believe you when you say you edited the video yourself!

The platform is user-friendly, eliminating the need for a learning curve. You also don’t need to be an experienced editor or graphic designer to use this platform. Here is a list of nifty features you might find helpful on this platform.

• GIF support
• Audio equalizer
• Advanced text editing
• Noise removal
• Scene detection
• Audio mixer
• Color tuning

Out of all the wonderful features mentioned above, we will zero in on 4K editing support for now. You can use this feature to edit and export videos up to 4K without breaking a sweat.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Wondershare Filmora allows you to customize your 4K videos by zooming in on a particular scene, tilting the video, or incorporating panning to give it a serene effect. We guarantee you will have fun using this platform and will get better at creating exquisite 4K content for your channel.

Below is a simple guide on using Wondershare Filmora to set the 4k video frame rate.

Step1 Launch the platform on your device and select the “File” tab. After a drop-down menu appears, select “Project Settings.”

Step2 In the dialogue box, select “Frame Rate” and choose the frame rate you think is ideal for your video.

Step3 Click “OK” and edit the videos as you like.

Conclusion

4K is the trend of the era, and it would be a shame if you got left behind. The viewer’s expectations are rising steadily, and they would rather skip your video to watch another if the quality is not up to par. In addition to giving you a competitive edge, 4K videos are very crisp and allow you to enjoy deep, vibrant colors.

You can also capture still photos from the video without compromising on quality. We can go on and on about the benefits of adopting 4K resolution in your videos. Therefore, it would be wise to increase your knowledge base and learn everything there is to know about 4K videos and how to set the best frame rates.

Free Download For macOS 10.14 or later

Wondershare Filmora allows you to customize your 4K videos by zooming in on a particular scene, tilting the video, or incorporating panning to give it a serene effect. We guarantee you will have fun using this platform and will get better at creating exquisite 4K content for your channel.

Below is a simple guide on using Wondershare Filmora to set the 4k video frame rate.

Step1 Launch the platform on your device and select the “File” tab. After a drop-down menu appears, select “Project Settings.”

Step2 In the dialogue box, select “Frame Rate” and choose the frame rate you think is ideal for your video.

Step3 Click “OK” and edit the videos as you like.

Conclusion

4K is the trend of the era, and it would be a shame if you got left behind. The viewer’s expectations are rising steadily, and they would rather skip your video to watch another if the quality is not up to par. In addition to giving you a competitive edge, 4K videos are very crisp and allow you to enjoy deep, vibrant colors.

You can also capture still photos from the video without compromising on quality. We can go on and on about the benefits of adopting 4K resolution in your videos. Therefore, it would be wise to increase your knowledge base and learn everything there is to know about 4K videos and how to set the best frame rates.

Why Your Transparent GIF Is Hard to Remove and How to Do With It

Why Your Transparent GIF Is Hard to Remove and How to Do With It

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

GIFs are very popular type of content these days, on social media. It seems to be very engaging for the audience. The GIF image format was first developed by CompuServe in 1987. Since that time, they have been used for entertainment purposes and their application is increasing with each passing day. But when it comes to transparent GIFs, it gets annoying sometimes. It looks ugly with weird white edges.

Sometimes it becomes hard to remove such GIFs with transparent backgrounds. Do you ever think about why it happens? This blog is dedicated to explaining the possible reasons for this. Also, we are going to explain how one can achieve to remove such a transparent background from the GIF.

In this article

01 [Why Sometimes Transparent Gif is Hard to Remove](#Part 1)

02 [How to Remove the Background from an Animated Gif in Photoshop](#Part 2)

03 [8 Best Online Transparent Gif Maker Websites](#Part 3)

Part 1 Why Sometimes Transparent Gif is Hard to Remove

When the GIF looks ugly with a transparent background, it becomes necessary to remove the background. But it sometimes becomes hard as this requires proper skills as well as adequate tools to achieve this. In the absence of even one, the final output may come out to be clumsy. There are many tools that can be used to remove the background from a transparent animated GIF. But it is hard to use these tools without proper knowledge. If you learn the skills, the task becomes so easy.

Part 2 How to Remove the Background from an Animated Gif in Photoshop

Photoshop is popularly known for being a photo manipulation and editing software. But it can also be used to remove the background of an animated GIF. Here, we will discuss the step-by-step approach to removing an animated GIF background.

Step 1: Import The GIF File

This can be done in 2 ways. One is clicking and dragging the file from the file location on the computer, into Photoshop. The second way is to click on the “File” menu of Photoshop. Then tap on “Open” and double click on the desired GIF file.

Step 2: Set Up The Project

It is required to edit each frame separately for deleting the background of an animated GIF (gif remove bg). For this:

Find the “Video Group” option on the right side of Photoshop. Right-click on it and tap on the “Ungroup layers” option.

This will give you the video layer, which you want to edit. Right-click on “layer 1” and tap on the “Convert to smart object” option. Again right-click on “Layer 1” and click on “Edit Contents”.

You will get a new Photoshop tap for the editing of GIF files. Just freely close the original tab.

Step 3: Begin The Editing Part

Find the blue line called the Timeline at the bottom of the screen. This Timeline will help you to edit the GIF. To make your editing easy, you can zoom on the frames with the help of a slider located at the bottom of the screen.

For a better outcome, the frame-by-frame deletion of the GIF background is advisable. It might be a little time-consuming but it is the most appropriate and accurate approach. So, delete the background from each frame independently.

To move from one frame of the GIF to another, hold and move the blue arrow having a red line.

\

Step 4: Delete The Transparent GIF Background

Now, delete the background of each frame of your GIF. To delete the background of any particular frame, click on that frame. For this, you can either use a “Quick Selection Tool” or a “Polygonal Lasso Tool”. You will get the final result that will be background free.

Step 5: Save The Project In GIF Format

To save the GIF project, click on the “File” menu and then tap on the “Save As” option. Give a file name and select “GIF” on the “Save As Type” options menu. Then click on “OK” to save the GIF file.

Part 3 Best Online Transparent Gif Maker Websites

When it comes to how to make a gif transparent through online sources, there are many options available. Here, we are going to discuss the best options out of them.

01 Online Transparent Gif Maker for Windows

Let’s learn about the best performing online transparent Gif creator websites compatible with Windows.

● EzGif

EzGif is among the best transparent GIF-making websites available online. Using the website, one can create a high-resolution GIF with a transparent background. To achieve this, the website will ask to upload a number of images of transparent backgrounds. The images can be uploaded in PNG, JPEG, GIF, or any other format. Then, next is to combine all the images to form a GIF. The website allows users to upload a maximum of 2000 images. Each image size should not exceed 6MB and the total size of all images should not exceed 100 MB.

● Lunapic

Lunapic is also one of the best and easy-to-use websites for making a confetti GIF transparent, available for free. There is no limitation to the number of images or image size. Also, the website does not have limitations for the total file size, one can upload. It also allows the user to upload an image already having a transparent background and create a GIF out of it.

● GIF Make

GIF make is also a useful free website for making high-quality transparent GIFs. It is easy to use this website for transparent GIF creations. You only need to upload transparent PNG images for this. It allows you to add as many as 80 images to create a GIF file. But there is one limitation to the website that it does not contain the option of uploading images without a transparent background and removing the background. So, the user only needs to upload an image with a transparent background to create a GIF.

● Animizer.net

Animizer.net is also a good option when it comes to creating transparent GIFs from images, for free. For this, you can upload multiple PNG images in this online tool. Then, the tool will help you create a GIF by joining them all together. It allows you to upload an unlimited number of images. The online website also enables the creation of transparent background GIFs by uploading images with colored backgrounds. It allows you to remove the background of images and make them transparent.

02 Online Transparent Gif Maker for Mac

● EzGif

We have already discussed EzGif as the best online transparent GIF maker website for Windows. But, we want to ensure that this also works best in the MAC version. It helps to convert either a video or photos into a GIF file. Moreover, the website supports all the standard image formats such as HEIC, TIFF, PNG, JPEG, BMP, etc.

● Picasion

Picasion is one of the best websites for Mac users to create transparent GIFs and memes. The website is easy to use by uploading the images from the desktop location. But it has certain limitations. It only allows you to add a maximum of 3 images to convert them into GIF files. Moreover, it also lacks the capabilities of adding texts and resizing the GIFs.

● Gifpal

Gifpal also allows the MAC user to convert images into transparent GIFs with the least effort. The loading time of the website is very fast. It also allows the user to upload the images directly from a phone camera or webcam. The user can also rearrange and remove the watermarks of the images after uploading them. It also enables the user to preview the GIF before downloading.

● Make A GIF

Last but not the least, Make a GIF is also a great website for MAC users to create transparent GIFs. People can use this website for free. It enables the user to generate GIFs out of multiple images or videos. Customization options like adding text, resizing, rearranging, etc are also available with it. But, there is a limitation with Make a GIF that it does not allow the user to preview the GIF before download.

These are some of the widely used websites for Windows and MACs applicable for making transparent GIFs. But now we are introducing the best option out of all and i.e. Wondershare Filmora.

Both Windows and MAC users can use Wondershare Filmora effectively for creating snow transparent GIFs. Though it can be used easily, it creates a GIF of high quality and resolution. This tool is highly recommended for such purposes because of its simple and most interactive interface. The user can make a GIF by combining any number of images and also from small videos. Easy customization of GIFs such as adding texts, elements, overlays, etc, is also available for the user

Moreover, one can also use Wondershare Filmora Video Editor meme maker to create a GIF online. You can directly make the GIF here, without any watermark. No sign up required for this and one can use it for free. A lot more editing options for GIFs are also accessible by the user easily.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Ending Thoughts →

● So, we can conclude that though it is hard to remove the transparent GIF, it can be done with proper knowledge and skills. There are many online free and paid tools available for this. Choose according to your suitability.

● When it comes to making a GIF on Windows and MAC platforms, we have discussed the best online websites according to their effectiveness.

● Wondershare Filmora is the most suitable option out of all, as it can be used in both Windows and MAC platforms. Moreover, people can use this wonderful tool for both creating a transparent animated GIF and removing the transparent background of the GIF. So, we can say it is an all-in-one solution.

Try It Free Try It Free

GIFs are very popular type of content these days, on social media. It seems to be very engaging for the audience. The GIF image format was first developed by CompuServe in 1987. Since that time, they have been used for entertainment purposes and their application is increasing with each passing day. But when it comes to transparent GIFs, it gets annoying sometimes. It looks ugly with weird white edges.

Sometimes it becomes hard to remove such GIFs with transparent backgrounds. Do you ever think about why it happens? This blog is dedicated to explaining the possible reasons for this. Also, we are going to explain how one can achieve to remove such a transparent background from the GIF.

In this article

01 [Why Sometimes Transparent Gif is Hard to Remove](#Part 1)

02 [How to Remove the Background from an Animated Gif in Photoshop](#Part 2)

03 [8 Best Online Transparent Gif Maker Websites](#Part 3)

Part 1 Why Sometimes Transparent Gif is Hard to Remove

When the GIF looks ugly with a transparent background, it becomes necessary to remove the background. But it sometimes becomes hard as this requires proper skills as well as adequate tools to achieve this. In the absence of even one, the final output may come out to be clumsy. There are many tools that can be used to remove the background from a transparent animated GIF. But it is hard to use these tools without proper knowledge. If you learn the skills, the task becomes so easy.

Part 2 How to Remove the Background from an Animated Gif in Photoshop

Photoshop is popularly known for being a photo manipulation and editing software. But it can also be used to remove the background of an animated GIF. Here, we will discuss the step-by-step approach to removing an animated GIF background.

Step 1: Import The GIF File

This can be done in 2 ways. One is clicking and dragging the file from the file location on the computer, into Photoshop. The second way is to click on the “File” menu of Photoshop. Then tap on “Open” and double click on the desired GIF file.

Step 2: Set Up The Project

It is required to edit each frame separately for deleting the background of an animated GIF (gif remove bg). For this:

Find the “Video Group” option on the right side of Photoshop. Right-click on it and tap on the “Ungroup layers” option.

This will give you the video layer, which you want to edit. Right-click on “layer 1” and tap on the “Convert to smart object” option. Again right-click on “Layer 1” and click on “Edit Contents”.

You will get a new Photoshop tap for the editing of GIF files. Just freely close the original tab.

Step 3: Begin The Editing Part

Find the blue line called the Timeline at the bottom of the screen. This Timeline will help you to edit the GIF. To make your editing easy, you can zoom on the frames with the help of a slider located at the bottom of the screen.

For a better outcome, the frame-by-frame deletion of the GIF background is advisable. It might be a little time-consuming but it is the most appropriate and accurate approach. So, delete the background from each frame independently.

To move from one frame of the GIF to another, hold and move the blue arrow having a red line.

\

Step 4: Delete The Transparent GIF Background

Now, delete the background of each frame of your GIF. To delete the background of any particular frame, click on that frame. For this, you can either use a “Quick Selection Tool” or a “Polygonal Lasso Tool”. You will get the final result that will be background free.

Step 5: Save The Project In GIF Format

To save the GIF project, click on the “File” menu and then tap on the “Save As” option. Give a file name and select “GIF” on the “Save As Type” options menu. Then click on “OK” to save the GIF file.

Part 3 Best Online Transparent Gif Maker Websites

When it comes to how to make a gif transparent through online sources, there are many options available. Here, we are going to discuss the best options out of them.

01 Online Transparent Gif Maker for Windows

Let’s learn about the best performing online transparent Gif creator websites compatible with Windows.

● EzGif

EzGif is among the best transparent GIF-making websites available online. Using the website, one can create a high-resolution GIF with a transparent background. To achieve this, the website will ask to upload a number of images of transparent backgrounds. The images can be uploaded in PNG, JPEG, GIF, or any other format. Then, next is to combine all the images to form a GIF. The website allows users to upload a maximum of 2000 images. Each image size should not exceed 6MB and the total size of all images should not exceed 100 MB.

● Lunapic

Lunapic is also one of the best and easy-to-use websites for making a confetti GIF transparent, available for free. There is no limitation to the number of images or image size. Also, the website does not have limitations for the total file size, one can upload. It also allows the user to upload an image already having a transparent background and create a GIF out of it.

● GIF Make

GIF make is also a useful free website for making high-quality transparent GIFs. It is easy to use this website for transparent GIF creations. You only need to upload transparent PNG images for this. It allows you to add as many as 80 images to create a GIF file. But there is one limitation to the website that it does not contain the option of uploading images without a transparent background and removing the background. So, the user only needs to upload an image with a transparent background to create a GIF.

● Animizer.net

Animizer.net is also a good option when it comes to creating transparent GIFs from images, for free. For this, you can upload multiple PNG images in this online tool. Then, the tool will help you create a GIF by joining them all together. It allows you to upload an unlimited number of images. The online website also enables the creation of transparent background GIFs by uploading images with colored backgrounds. It allows you to remove the background of images and make them transparent.

02 Online Transparent Gif Maker for Mac

● EzGif

We have already discussed EzGif as the best online transparent GIF maker website for Windows. But, we want to ensure that this also works best in the MAC version. It helps to convert either a video or photos into a GIF file. Moreover, the website supports all the standard image formats such as HEIC, TIFF, PNG, JPEG, BMP, etc.

● Picasion

Picasion is one of the best websites for Mac users to create transparent GIFs and memes. The website is easy to use by uploading the images from the desktop location. But it has certain limitations. It only allows you to add a maximum of 3 images to convert them into GIF files. Moreover, it also lacks the capabilities of adding texts and resizing the GIFs.

● Gifpal

Gifpal also allows the MAC user to convert images into transparent GIFs with the least effort. The loading time of the website is very fast. It also allows the user to upload the images directly from a phone camera or webcam. The user can also rearrange and remove the watermarks of the images after uploading them. It also enables the user to preview the GIF before downloading.

● Make A GIF

Last but not the least, Make a GIF is also a great website for MAC users to create transparent GIFs. People can use this website for free. It enables the user to generate GIFs out of multiple images or videos. Customization options like adding text, resizing, rearranging, etc are also available with it. But, there is a limitation with Make a GIF that it does not allow the user to preview the GIF before download.

These are some of the widely used websites for Windows and MACs applicable for making transparent GIFs. But now we are introducing the best option out of all and i.e. Wondershare Filmora.

Both Windows and MAC users can use Wondershare Filmora effectively for creating snow transparent GIFs. Though it can be used easily, it creates a GIF of high quality and resolution. This tool is highly recommended for such purposes because of its simple and most interactive interface. The user can make a GIF by combining any number of images and also from small videos. Easy customization of GIFs such as adding texts, elements, overlays, etc, is also available for the user

Moreover, one can also use Wondershare Filmora Video Editor meme maker to create a GIF online. You can directly make the GIF here, without any watermark. No sign up required for this and one can use it for free. A lot more editing options for GIFs are also accessible by the user easily.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Ending Thoughts →

● So, we can conclude that though it is hard to remove the transparent GIF, it can be done with proper knowledge and skills. There are many online free and paid tools available for this. Choose according to your suitability.

● When it comes to making a GIF on Windows and MAC platforms, we have discussed the best online websites according to their effectiveness.

● Wondershare Filmora is the most suitable option out of all, as it can be used in both Windows and MAC platforms. Moreover, people can use this wonderful tool for both creating a transparent animated GIF and removing the transparent background of the GIF. So, we can say it is an all-in-one solution.

Try It Free Try It Free

GIFs are very popular type of content these days, on social media. It seems to be very engaging for the audience. The GIF image format was first developed by CompuServe in 1987. Since that time, they have been used for entertainment purposes and their application is increasing with each passing day. But when it comes to transparent GIFs, it gets annoying sometimes. It looks ugly with weird white edges.

Sometimes it becomes hard to remove such GIFs with transparent backgrounds. Do you ever think about why it happens? This blog is dedicated to explaining the possible reasons for this. Also, we are going to explain how one can achieve to remove such a transparent background from the GIF.

In this article

01 [Why Sometimes Transparent Gif is Hard to Remove](#Part 1)

02 [How to Remove the Background from an Animated Gif in Photoshop](#Part 2)

03 [8 Best Online Transparent Gif Maker Websites](#Part 3)

Part 1 Why Sometimes Transparent Gif is Hard to Remove

When the GIF looks ugly with a transparent background, it becomes necessary to remove the background. But it sometimes becomes hard as this requires proper skills as well as adequate tools to achieve this. In the absence of even one, the final output may come out to be clumsy. There are many tools that can be used to remove the background from a transparent animated GIF. But it is hard to use these tools without proper knowledge. If you learn the skills, the task becomes so easy.

Part 2 How to Remove the Background from an Animated Gif in Photoshop

Photoshop is popularly known for being a photo manipulation and editing software. But it can also be used to remove the background of an animated GIF. Here, we will discuss the step-by-step approach to removing an animated GIF background.

Step 1: Import The GIF File

This can be done in 2 ways. One is clicking and dragging the file from the file location on the computer, into Photoshop. The second way is to click on the “File” menu of Photoshop. Then tap on “Open” and double click on the desired GIF file.

Step 2: Set Up The Project

It is required to edit each frame separately for deleting the background of an animated GIF (gif remove bg). For this:

Find the “Video Group” option on the right side of Photoshop. Right-click on it and tap on the “Ungroup layers” option.

This will give you the video layer, which you want to edit. Right-click on “layer 1” and tap on the “Convert to smart object” option. Again right-click on “Layer 1” and click on “Edit Contents”.

You will get a new Photoshop tap for the editing of GIF files. Just freely close the original tab.

Step 3: Begin The Editing Part

Find the blue line called the Timeline at the bottom of the screen. This Timeline will help you to edit the GIF. To make your editing easy, you can zoom on the frames with the help of a slider located at the bottom of the screen.

For a better outcome, the frame-by-frame deletion of the GIF background is advisable. It might be a little time-consuming but it is the most appropriate and accurate approach. So, delete the background from each frame independently.

To move from one frame of the GIF to another, hold and move the blue arrow having a red line.

\

Step 4: Delete The Transparent GIF Background

Now, delete the background of each frame of your GIF. To delete the background of any particular frame, click on that frame. For this, you can either use a “Quick Selection Tool” or a “Polygonal Lasso Tool”. You will get the final result that will be background free.

Step 5: Save The Project In GIF Format

To save the GIF project, click on the “File” menu and then tap on the “Save As” option. Give a file name and select “GIF” on the “Save As Type” options menu. Then click on “OK” to save the GIF file.

Part 3 Best Online Transparent Gif Maker Websites

When it comes to how to make a gif transparent through online sources, there are many options available. Here, we are going to discuss the best options out of them.

01 Online Transparent Gif Maker for Windows

Let’s learn about the best performing online transparent Gif creator websites compatible with Windows.

● EzGif

EzGif is among the best transparent GIF-making websites available online. Using the website, one can create a high-resolution GIF with a transparent background. To achieve this, the website will ask to upload a number of images of transparent backgrounds. The images can be uploaded in PNG, JPEG, GIF, or any other format. Then, next is to combine all the images to form a GIF. The website allows users to upload a maximum of 2000 images. Each image size should not exceed 6MB and the total size of all images should not exceed 100 MB.

● Lunapic

Lunapic is also one of the best and easy-to-use websites for making a confetti GIF transparent, available for free. There is no limitation to the number of images or image size. Also, the website does not have limitations for the total file size, one can upload. It also allows the user to upload an image already having a transparent background and create a GIF out of it.

● GIF Make

GIF make is also a useful free website for making high-quality transparent GIFs. It is easy to use this website for transparent GIF creations. You only need to upload transparent PNG images for this. It allows you to add as many as 80 images to create a GIF file. But there is one limitation to the website that it does not contain the option of uploading images without a transparent background and removing the background. So, the user only needs to upload an image with a transparent background to create a GIF.

● Animizer.net

Animizer.net is also a good option when it comes to creating transparent GIFs from images, for free. For this, you can upload multiple PNG images in this online tool. Then, the tool will help you create a GIF by joining them all together. It allows you to upload an unlimited number of images. The online website also enables the creation of transparent background GIFs by uploading images with colored backgrounds. It allows you to remove the background of images and make them transparent.

02 Online Transparent Gif Maker for Mac

● EzGif

We have already discussed EzGif as the best online transparent GIF maker website for Windows. But, we want to ensure that this also works best in the MAC version. It helps to convert either a video or photos into a GIF file. Moreover, the website supports all the standard image formats such as HEIC, TIFF, PNG, JPEG, BMP, etc.

● Picasion

Picasion is one of the best websites for Mac users to create transparent GIFs and memes. The website is easy to use by uploading the images from the desktop location. But it has certain limitations. It only allows you to add a maximum of 3 images to convert them into GIF files. Moreover, it also lacks the capabilities of adding texts and resizing the GIFs.

● Gifpal

Gifpal also allows the MAC user to convert images into transparent GIFs with the least effort. The loading time of the website is very fast. It also allows the user to upload the images directly from a phone camera or webcam. The user can also rearrange and remove the watermarks of the images after uploading them. It also enables the user to preview the GIF before downloading.

● Make A GIF

Last but not the least, Make a GIF is also a great website for MAC users to create transparent GIFs. People can use this website for free. It enables the user to generate GIFs out of multiple images or videos. Customization options like adding text, resizing, rearranging, etc are also available with it. But, there is a limitation with Make a GIF that it does not allow the user to preview the GIF before download.

These are some of the widely used websites for Windows and MACs applicable for making transparent GIFs. But now we are introducing the best option out of all and i.e. Wondershare Filmora.

Both Windows and MAC users can use Wondershare Filmora effectively for creating snow transparent GIFs. Though it can be used easily, it creates a GIF of high quality and resolution. This tool is highly recommended for such purposes because of its simple and most interactive interface. The user can make a GIF by combining any number of images and also from small videos. Easy customization of GIFs such as adding texts, elements, overlays, etc, is also available for the user

Moreover, one can also use Wondershare Filmora Video Editor meme maker to create a GIF online. You can directly make the GIF here, without any watermark. No sign up required for this and one can use it for free. A lot more editing options for GIFs are also accessible by the user easily.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Ending Thoughts →

● So, we can conclude that though it is hard to remove the transparent GIF, it can be done with proper knowledge and skills. There are many online free and paid tools available for this. Choose according to your suitability.

● When it comes to making a GIF on Windows and MAC platforms, we have discussed the best online websites according to their effectiveness.

● Wondershare Filmora is the most suitable option out of all, as it can be used in both Windows and MAC platforms. Moreover, people can use this wonderful tool for both creating a transparent animated GIF and removing the transparent background of the GIF. So, we can say it is an all-in-one solution.

Try It Free Try It Free

GIFs are very popular type of content these days, on social media. It seems to be very engaging for the audience. The GIF image format was first developed by CompuServe in 1987. Since that time, they have been used for entertainment purposes and their application is increasing with each passing day. But when it comes to transparent GIFs, it gets annoying sometimes. It looks ugly with weird white edges.

Sometimes it becomes hard to remove such GIFs with transparent backgrounds. Do you ever think about why it happens? This blog is dedicated to explaining the possible reasons for this. Also, we are going to explain how one can achieve to remove such a transparent background from the GIF.

In this article

01 [Why Sometimes Transparent Gif is Hard to Remove](#Part 1)

02 [How to Remove the Background from an Animated Gif in Photoshop](#Part 2)

03 [8 Best Online Transparent Gif Maker Websites](#Part 3)

Part 1 Why Sometimes Transparent Gif is Hard to Remove

When the GIF looks ugly with a transparent background, it becomes necessary to remove the background. But it sometimes becomes hard as this requires proper skills as well as adequate tools to achieve this. In the absence of even one, the final output may come out to be clumsy. There are many tools that can be used to remove the background from a transparent animated GIF. But it is hard to use these tools without proper knowledge. If you learn the skills, the task becomes so easy.

Part 2 How to Remove the Background from an Animated Gif in Photoshop

Photoshop is popularly known for being a photo manipulation and editing software. But it can also be used to remove the background of an animated GIF. Here, we will discuss the step-by-step approach to removing an animated GIF background.

Step 1: Import The GIF File

This can be done in 2 ways. One is clicking and dragging the file from the file location on the computer, into Photoshop. The second way is to click on the “File” menu of Photoshop. Then tap on “Open” and double click on the desired GIF file.

Step 2: Set Up The Project

It is required to edit each frame separately for deleting the background of an animated GIF (gif remove bg). For this:

Find the “Video Group” option on the right side of Photoshop. Right-click on it and tap on the “Ungroup layers” option.

This will give you the video layer, which you want to edit. Right-click on “layer 1” and tap on the “Convert to smart object” option. Again right-click on “Layer 1” and click on “Edit Contents”.

You will get a new Photoshop tap for the editing of GIF files. Just freely close the original tab.

Step 3: Begin The Editing Part

Find the blue line called the Timeline at the bottom of the screen. This Timeline will help you to edit the GIF. To make your editing easy, you can zoom on the frames with the help of a slider located at the bottom of the screen.

For a better outcome, the frame-by-frame deletion of the GIF background is advisable. It might be a little time-consuming but it is the most appropriate and accurate approach. So, delete the background from each frame independently.

To move from one frame of the GIF to another, hold and move the blue arrow having a red line.

\

Step 4: Delete The Transparent GIF Background

Now, delete the background of each frame of your GIF. To delete the background of any particular frame, click on that frame. For this, you can either use a “Quick Selection Tool” or a “Polygonal Lasso Tool”. You will get the final result that will be background free.

Step 5: Save The Project In GIF Format

To save the GIF project, click on the “File” menu and then tap on the “Save As” option. Give a file name and select “GIF” on the “Save As Type” options menu. Then click on “OK” to save the GIF file.

Part 3 Best Online Transparent Gif Maker Websites

When it comes to how to make a gif transparent through online sources, there are many options available. Here, we are going to discuss the best options out of them.

01 Online Transparent Gif Maker for Windows

Let’s learn about the best performing online transparent Gif creator websites compatible with Windows.

● EzGif

EzGif is among the best transparent GIF-making websites available online. Using the website, one can create a high-resolution GIF with a transparent background. To achieve this, the website will ask to upload a number of images of transparent backgrounds. The images can be uploaded in PNG, JPEG, GIF, or any other format. Then, next is to combine all the images to form a GIF. The website allows users to upload a maximum of 2000 images. Each image size should not exceed 6MB and the total size of all images should not exceed 100 MB.

● Lunapic

Lunapic is also one of the best and easy-to-use websites for making a confetti GIF transparent, available for free. There is no limitation to the number of images or image size. Also, the website does not have limitations for the total file size, one can upload. It also allows the user to upload an image already having a transparent background and create a GIF out of it.

● GIF Make

GIF make is also a useful free website for making high-quality transparent GIFs. It is easy to use this website for transparent GIF creations. You only need to upload transparent PNG images for this. It allows you to add as many as 80 images to create a GIF file. But there is one limitation to the website that it does not contain the option of uploading images without a transparent background and removing the background. So, the user only needs to upload an image with a transparent background to create a GIF.

● Animizer.net

Animizer.net is also a good option when it comes to creating transparent GIFs from images, for free. For this, you can upload multiple PNG images in this online tool. Then, the tool will help you create a GIF by joining them all together. It allows you to upload an unlimited number of images. The online website also enables the creation of transparent background GIFs by uploading images with colored backgrounds. It allows you to remove the background of images and make them transparent.

02 Online Transparent Gif Maker for Mac

● EzGif

We have already discussed EzGif as the best online transparent GIF maker website for Windows. But, we want to ensure that this also works best in the MAC version. It helps to convert either a video or photos into a GIF file. Moreover, the website supports all the standard image formats such as HEIC, TIFF, PNG, JPEG, BMP, etc.

● Picasion

Picasion is one of the best websites for Mac users to create transparent GIFs and memes. The website is easy to use by uploading the images from the desktop location. But it has certain limitations. It only allows you to add a maximum of 3 images to convert them into GIF files. Moreover, it also lacks the capabilities of adding texts and resizing the GIFs.

● Gifpal

Gifpal also allows the MAC user to convert images into transparent GIFs with the least effort. The loading time of the website is very fast. It also allows the user to upload the images directly from a phone camera or webcam. The user can also rearrange and remove the watermarks of the images after uploading them. It also enables the user to preview the GIF before downloading.

● Make A GIF

Last but not the least, Make a GIF is also a great website for MAC users to create transparent GIFs. People can use this website for free. It enables the user to generate GIFs out of multiple images or videos. Customization options like adding text, resizing, rearranging, etc are also available with it. But, there is a limitation with Make a GIF that it does not allow the user to preview the GIF before download.

These are some of the widely used websites for Windows and MACs applicable for making transparent GIFs. But now we are introducing the best option out of all and i.e. Wondershare Filmora.

Both Windows and MAC users can use Wondershare Filmora effectively for creating snow transparent GIFs. Though it can be used easily, it creates a GIF of high quality and resolution. This tool is highly recommended for such purposes because of its simple and most interactive interface. The user can make a GIF by combining any number of images and also from small videos. Easy customization of GIFs such as adding texts, elements, overlays, etc, is also available for the user

Moreover, one can also use Wondershare Filmora Video Editor meme maker to create a GIF online. You can directly make the GIF here, without any watermark. No sign up required for this and one can use it for free. A lot more editing options for GIFs are also accessible by the user easily.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Ending Thoughts →

● So, we can conclude that though it is hard to remove the transparent GIF, it can be done with proper knowledge and skills. There are many online free and paid tools available for this. Choose according to your suitability.

● When it comes to making a GIF on Windows and MAC platforms, we have discussed the best online websites according to their effectiveness.

● Wondershare Filmora is the most suitable option out of all, as it can be used in both Windows and MAC platforms. Moreover, people can use this wonderful tool for both creating a transparent animated GIF and removing the transparent background of the GIF. So, we can say it is an all-in-one solution.

How to Cut Videos on Mac without Using FFmpeg?

Tiktok, Instagram reels, and Ads are well-known short video platforms that are popular due to their ease of use. Making film collections for entertainment purposes is a popular trend. As the previous user mentioned, sometimes all you want is a section of your movie, which can be the highlight or any other part you want to keep. Long videos are no longer a problem with such a video cutter for Mac. If that’s what you’re looking for, you might want to look into some of the software that’s available here.

HOW TO CUT VIDEO ON MAC WITHOUT USING FFMPEG?

What are FFmpeg and its cons for cut videos?

Without transcoding the media, FFmpeg can cut, trim, and extract videos. This is an excellent method for preserving original quality and avoiding generation loss.

Because of how keyframes work, it is impossible to cut at an exact point in time using FFmpeg without transcoding the video. As a result, you’re left with a cut at the nearest keyframe.

BEST FREE FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

FILMORA VIDEO EDITOR

Supported OS: Windows and Mac

Filmora Video Editor is another well-known video editor that is widely used for video editing. It was released two decades ago to provide low-cost video editing software. Aside from video cutting and joining, it has some great features such as adding filters, titles, texts, and so on. You can also record your voice or live music, mix audio and video tracks, and do other things. It is simple to use and is available for both Mac and Windows users.

Filmora includes an instant cutter tool that can be used throughout clip import and is designed for use with large amounts of high-resolution content. As the names indicate, it is very simple and serves only one purpose. You can drag multiple clips onto its window, but only if the Merge sub-mode is enabled. Trim mode is only for trimming the ends of a single clip, and its interface only displays one clip in the left-size source tray. You can Add Segments, which creates a new clip based on your trimmed original, but you can’t split a clip explicitly.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.14 or later

Features:

• All editing tools and features are well-displayed in the main windows, which can be found and used easily;
• Very easy to cut or trim video files just with a few clicks;
• Lots of filters, overlays, motion graphics, titles, and more special effects can be added to the video.
• More features like Picture in Picture and Green Screen and Split Screen can be used to make videos more unique.

Pros:

• Intuitive Interface
• Easy To Use
• Great Features
• Affordable Perpetual License
• Great Final Video Results
• Faster Renders And Previews
• Supports Screen Capturing
• Support Wide Range Of File Formats
• User Support Is Good

Cons:

• Lacks Advanced Feature
• Free Version Has Watermark
• Not Available For Linux And Phones
• Pricing Is Expensive
• Software Lagging

Steps On How To Cut Video On Mac Using Filmora Video Editor

Step 1: Import Video Files

You will begin by importing the video files into the project window of your program through dragging and dropping.

Step 2: Add Video To The Timeline

Drag and dropping are the easiest way to add the video to the timeline.

Step 3: Cut Video

If you want to trim the video, just move the cursor at the beginning or end of the video. When the cursor becomes a cross, move it forward or backward. Trimming only allows you to cut the beginning or end of a video.

If you need to cut a section of a video, you should follow do this: move the cursor at the beginning of the video section you want to cut, then click the scissors icon > Next, move the cursor to the end of the video section you want to cut and click scissors icon > Right-click on the video section you want to cut and click “Delete“.

Step 4: Export the Video

To export your video, click the “export” button and choose the local tab. After selecting the output device and format, just click “Create” to save it.

HANDBRAKE

Supported OS: Linux, Windows, and Mac

HandBrake is a multithreaded video transcoder that is unfastened and open source. It can compress and convert nearly any virtual media layout to another. HandBrake is able to rip encrypted DVDs the usage of libdvdcss (libdvdcss is covered with the VLC media participant on macOS and AnyDVD/DVD forty three on Windows).

This software program additionally enables batch processing, which converts a couple of video files at the same time. Additionally, a plethora of presets are available to guide you to the preferred output without having to tinker with a plethora of options.

Handbrake is a powerful and excellent video converter for Windows, Mac, and Linux that should not be overlooked. It provides all of the necessary features in a simple tool that gives the user complete control over the output. Before we get into the specifics, here’s a rundown of Handbrake’s advantages and disadvantages.

Features:

• Support of chapter selections
• Support of subtitles
• Integrated bitrate calculator
• Picture deinterlacing, cropping, and scaling
• Live Video Preview

Pros:

• HandBrake has a very simple layout which makes the video converter very easy to use, even for those who are converting videos for the first time.
• The live preview helps.
• The fact that the software is free and has device presets for iOS and Android certainly makes HandBrake a welcome video converter.
• The queuing tray for batch conversions is particularly nice.
• People who convert a lot of videos will find it very helpful.

Cons:

• On the flip side, the settings are not always easy to deal with.
• It takes a lot of time and then there are errors. The latest version fixes some old bugs but there are hiccups.
• The live preview is for up to four minutes of a video.
• It is futile for very long videos.
• The settings interface and that of the live preview could be better.
• The open-source software also doesn’t support all video formats.
• Given the diversity of devices and the multitude of formats in use today, HandBrake needs more compatibility.

Steps On How To Compress Video Using Handbrake

1. After you download and install Handbrake, open the app. On the left side, under ‘Source Selection’, click ‘File’. Select the file from the folder and then click ‘open’.

1. Choose where you want the compressed video to be saved by clicking ‘Browse’.

1. Enter a name for the video, and click ‘Save’.

1. Under ‘Output Settings’, choose MP4 for ‘Container’.

1. Click the ‘Video’ tab, under it, is the ‘Video Codec’, choose (x264).

1. Select a Preset from the ‘Preset Drawer’. We recommend you choose Fast1030p 30 for high quality.

1. Choose the ‘framerate’, depending on your source video i.e. NTSC (29.97fps), then make it 30fps by choosing 30. Also, tick the ‘Constant Framerate’ to ensure better compatibility.

1. Enter an ‘Average Bitrate (kbps)’ for the video between 5,000-10,000 (take note: higher bitrate has higher quality video but will take longer to upload and download).

1. Click the ‘Picture’ tab if you want to change the video frame size or resolution.

1. Change ‘Anamorphic’ to ‘None’, and ‘Modulus’ to ‘16’. And tick ‘Keep Aspect Ratio’. Use the arrow down on Width to change from 1920 (full HD) down to 1280.

2. Select the ‘Audio’ tab and choose 48 for the Samplerate. Choose Stereo for Mixdown. Choose 320 for your audio Bitrate.

1. Hit the ‘Start Encode’ button and wait until the video has finished compressing. Handbrake will let you know when it has finished.

SHUTTER ENCODER

Supported OS: Mac, Linux, and Windows

Shutter Encoder offers a complimentary codec and conversion tool for everyone that was created in collaboration with video editors.

Convert your videos, images, and audio files to OP-Atom format, which is compatible with Avid Media Composer and Pro Tools. Encode your files, replace audio, burn to DVD, analyze audio volume, download web videos, and create your own timelapse.

Analyze audio loudness, replace audio, author DVDs and Blu-rays, create image sequences, download web videos, and more. Everything is done as simply and efficiently as possible

Shutter Encoder makes use of Java as well as other tools such as 7za, VLC, FFmpeg, ExifTool, MKVMerge (part of MKVToolNix), MediaInfo, DVDAuthor, youtube-dl, and others.

Shutter Encoder offers advanced users the option to tailor the conversion individually. You can, for example, manually change the bitrate of audio and video, but you can also set a file size limit and perform the conversion based on that. Further work techniques, such as the ability to enable hardware of the computer itself and complete the conversion according to a predefined profile, are available in a separate box.

Features:

• Without conversion: Cut without re-encoding, Replace audio, Rewrap, Conform, Merge, Subtitling (create subtitles for a video), Video inserts
• Sound conversion: WAV, AIFF, FLAC, MP3, AC3, OPUS, OGG
• Editing codecs: DNxHD, DNxHR, Apple ProRes, QT Animation, Uncompressed YUV
• Output codecs: , DV PAL, XDCAM HD422, AVC-Intra 100, XAVC, HAP, , VP9, AV1, OGV, MJPEG, Xvid, WMV, MPEG
• Archiving codec: FFV1
• Image creation: JPEG, PNG, TIF, TGA, DPX, BPM, ICO, WEBP
• Burn & Rip: DVD, Blu-ray, DVD RIP
• Analysis: Loudness & True Peak, Audio normalization, Cut detection, Black detection
• Download web videos using youtube-dl

Pros:

• Conversion according to profiles
• Extensive advanced options
• Built-in editing capabilities

Cons:

• Limited preview capability

Steps On How To Use Shutter Encoder

1. To start, drag the video from your file manager and drop it onto the Shutter Encoder window, or use the ‘Browse’ button available in the upper left-hand side corner of the window to add a video.

1. Next, from the ‘Choose function’ drop-down menu, scroll to (it’s the first under Output codecs). You will now see some new options in a new panel that appears on the right-hand side of the Shutter Encoder window. From there, if you want to crop the video, click the Crop checkbox:

1. A new window will pop up where you can use your mouse to crop the video to the desired size. If you want to change it to a predefined, fixed-size ratio value, uncheck the ‘Manual mode’ box, and you’ll be able to choose a ratio from the ‘Pre-settings’ drop-down.

2. Next, if you want to change the profile, expand the ‘Advanced features’ item in the Shutter Encoder sidebar, check the box for the Force profile option, then change the profile to what you want to use:

1. When you’re done with the video adjustments you want to make, click the ‘Start function’ button, and Shutter Encoder will begin encoding your new video.

AVIDEMUX

Supported OS: Linux, BSD, Mac OS X, and Microsoft Windows

Avidemux offers three fundamental operations: cutting, encoding, and filtering. Cutting allows users to copy, paste, save, or delete a specific part of a video and is incredibly beneficial when users are only interested in a small portion of a video or want to remove commercials from a TV show that they have recorded.

Encoding, on the other contrary, is the way of transforming a video to various formats so that it can be played on different players. Users of Avidemux can use this feature on videos they want to use for business or archive for personal use. They could also use this to convert a video that they intend to post online.

Users can also use Avidemux to filter their videos, which include incorporating subtitles and color profiles, deinterlacing, resizing and sharpening the image of a video, and increasing or decreasing the overall volume of the audio.

Meanwhile, Avidemux has task automation features that make video processing and editing quick and painless. A feature called Joblist allows users to organize their projects in a queue so that they can access their files from a single location. They can use this queue to handle videos in bulk as well.

Features:

• Multiple Formats
• Video Filters
• Advanced Interlacing
• Full Editing Control
• Simple Interface
• Open Source

Pros:

• Covers standard formats.
• All essential features are present.
• Surprisingly advanced filtering, processing, editing, and filtering controls.
• The interface is easy to learn.
• Open-source

Cons:

• The interface is very legacy and needs remodeling
• No longer updated
• No support

Steps On How To Cut Videos On Avidemux:

1. Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode.

1. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut.

2. You want it to read I; if it isn’t framed type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame.

1. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip.

1. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type.

1. You can now save the clip, either by going to File –> Save –> Save Video, or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip.

BEST PAID FFMPEG ALTERNATIVE TO CUT VIDEO ON MAC

JOYOSHARE MEDIA CUTTER

Supported OS: Mac and Windows

The best video cutting tool is Joyoshare Media Cutter for Windows (or Mac). As a professional video trimmer, it allows you to cut your media files at a 60X faster rate, allowing you to clip a 60-minute video or audio file in just one minute. The interface design is also simple and clean, allowing you to do it quickly.

Another noteworthy feature is the ability to easily cut and merge both video and audio without sacrificing quality. The cropper supports a variety of video and audio formats, including AVI, MP4, MPEG, VOB, WMV, ASF, RM, RMVB, 3GP, MP3, WMA, M4R, and others, allowing you to save the file in any format and on any device, including Apple.

More notably, this is a capable all-in-one video cutter. In addition to cutting videos and audio, it can convert all popular video formats, extract audio from video files, and merge video and audio files from the same source into a new one.

Features:

Convert to Any File Format

Merge Video and Audio Files into Multiple Formats

Improved Accuracy & Efficiency in Cutting Videos

60X Fast Conversion

Pros:

• Offers an easy way to cut, merge, and convert video files
• Blazing fast video-cutting and file-conversion speed
• Supports multiple audio and video file formats

Cons:

• Can only merge videos from the same source. That means you can’t use the program to merge separate videos from your gallery.
• The program doesn’t offer an easy way to remove an unwanted part of a video if it’s in the middle of the video. The only way to do that is by cutting the section before and after the video, then merging them into one.

Steps:

Step 1: Adding Video

To add a video, click the “Open” button. Locate the video you want to trim from your collection and open it. Alternatively, you can use the drag-and-drop feature.

Step 2: Select the Segment to Be Trimmed

At the bottom of the Joyoshare video window, you’ll be able to see a time slider through which you can skip to your desired timeframe. Move the slider handles attached to the yellow timeline bar to set the starting and ending points of your video.

Once you’ve set your desired starting point, click on the “[” button to highlight the starting segment, then move the right-hand slider to select the ending point, and click the ] button to set the end segment.

Step 3: Choose Your Desired Output Format and Destination Folder

Click the “Format” button, and a new window will pop up where you’ll be able to choose your preferred output format.

Step 4: Trim the Video

Click the “Start” button to begin trimming the segment. Wait for a minute for the program to finalize trimming the segment, then click the save button. That’s it! You’ve successfully trimmed your first video.

If you wish to cut and merge several segments, click the “+” icon at the bottom of the segments tab, then follow the above procedure to create several segments.

MOVAVI VIDEO EDITOR

Supported OS: Mac and Windows

Movavi Video Editor for Mac and Windows is a simple-to-use yet effective video editor and cutter. Aside from cutting and joining short videos, it can apply various video effects, add music and titles, and so on to make your movie more visually appealing. The video cutter tool has an easy-to-use interface and outstanding instructional videos, so you can get started quickly.

Movavi comes with a bunch of video editing controls into a straightforward, user-friendly interface. PiP, chroma-key, titling, basic keyframing, and even motion tracking are included. It isn’t as feature-rich or as fast as most of the competition, but it allows you to easily create visually appealing work.

The tool is not free, but it does offer a limited-time free trial to users. However, it is a little irritating when the ad appears after you install and launch the trial version.

Features:

• Media Library
• Templates
• Upload video or audio file
• Video and image management
• Title Editor
• Trim & Slice
• Video Effect
• Slow Motion & Time Effect
• Social Sharing
• Brand Overlay
• Text Overlay
• Audio Tools
• Speed Adjustment
• Split / Merge
• Video Stabilization

Pros:

• Easy-to-understand user interface
• Transitions with sound
• Motion tracking and picture-in-picture tools
• Chroma keying
• Quick movie-creation tool

Cons:

• Lacks advanced trim modes and clip pre-trimming
• Rendering on the slow side
• Not compatible with Apple Silicon M1

Steps:

1. Add Video Files

Launch Movavi’s MP4 trimmer, click the Add Media Files button, and upload the MP4 files you want to work with. The videos you’ve added will appear on the Timeline in the lower part of the program window.

1. Cut And Trim Your Videos

So how to cut MP4 video with Movavi Video Editor Plus? If you want to snip a video into two or more parts, click the file on the Timeline and move the red marker to the place where you want to make the first cut. Then click the Split button with the scissors icon or hit Ctrl+B. Repeat the process as many times as you need.

If you want to trim your video clip, select the file on the Timeline and then just pull the edge of the clip to shorten it as shown in the picture.

1. Save The Result

All that’s left to do is save your edited video. Click the Export button, choose the appropriate video format, and hit Start.

XILISOFT VIDEO CUTTER

Supported OS: Mac and Windows

Xilisoft Video Cutter is an effective programming cutter that lets you choose and cut your preferred segments in a single file as well as cut out the segments you don’t like. It is compatible with almost all popular video formats, including VCD, AVI, MPEG, MP4, WMV, 3GP, /MPEG-4 AVC, /PSP AVC, MOV, ASF, and others. It enables you to precisely set the start and end points.

While the software cannot cut segments from multiple input files at the same time, it can cut your selected source video into the number of clips you require in a single step. Xilisoft Video Cutter goes beyond standard cutting or slicing by allowing you to convert your video input files to a variety of well-known codecs. It is possible to convert the entire source file or just a specific segment, but this requires removing those unnecessary parts that frequently cause problems (TV advertisements, trailers, etc.).

Features:

Easily Cut Video Clips

Multi-trim Video to Whole

Output Clips to Multiple Formats

Instant Preview

Clear Timeline

Advanced Editing

1-2-3 Interface

Multilingual Interface

Pros:

Supports all of the most widely used video file formats

Converts your videos between formats

Simple cutting interface

Allows for multiple cuttings from a single source file

Cons:

Does not support batch processing

Steps On How To Cut Your Favored Segments:

1. Add Source Video File

Click the “Open“ button on the main interface, and select a video file in the pop-up window.

1. Set Clip Segments

Click “Play” and click the “Set Start Point” and “Set End Point” buttons successively during playing the video to set the start point and endpoint of the clip.

You can also set several segments. Click the “Show Advanced Mode” button and click the “New Clip” button in advanced mode to set the start and endpoints of the segments. Repeat the above steps to set several segments.

Tip: To delete a segment, please choose the segment in the segment list, and click the “Delete Clip” button on the toolbar; to adjust the segment order, please choose the segment and click the “Move Up” or “Move Down” button to adjust its order.

1. Output Settings

Click the “Cut” button at the bottom of the window to open the “Output Settings” window.

1. Start Cutting

Click the “OK” button to start video cutting. During cutting, you can check the cutting status by dragging the process bar or canceling the cutting. Tip: After cutting is done, click the “Open Output Folder” button to open the destination folder to check the clippings. Click the “Done” button to go back to the main window.

WHICH SHOULD I CHOOSE: FREE OR PAID VIDEO CUTTER ON MAC?

Whether you choose Free or Paid Video Cutter, it still depends on your edit and navigation if the project will succeed like what you’re anticipating. Beginners in the industry can go for Free Video Cutters to practice the craft without worrying about the monthly subscription.

However, if you’re a professional, I highly suggest that you choose Paid Video Cutter to lessen the hassle and create amazing output.

FAQS ABOUT CUTTING VIDEOS

1. How can I cut a video without losing quality?

Trimming VLC through LosslessCut

LosslessCut is an open-source video cutter that runs on Windows, Linux, and Mac. Like Filmora, this software also allows you to cut videos without re-encoding, so there is no loss of quality.

1. Who is the best video cutter?

Filmora is one of the best video cutter software that allows you to change the aesthetic of your video with one click. It comes with a wide range of video effects that enable you to make clips look good. Features: This tool provides fast editing processing and adjustable preview quality.

1. Why does trimming videos reduce quality?

In most cases, trimming only causes a minor loss of video quality. And there is no clear causal relationship between trimming and losing video quality. The main factors that influence video quality are Resolution, Bitrate, and Frame size.

If you are longing to pick up the best video cutter for Mac, you are supposed to evaluate it from different aspects, like operating interface, cutting features, output quality, post-processing ability, etc. Frankly speaking, there is no fixed answer. Everything depends on your actual requirements. If you want to cut videos on Mac with the forthright method, iMovie can be your top priority. If you prefer top-leading editing features, Blender is competitive enough for you.

Conclusion:

There you have it! Here is the alternative software to cut/shorten your video without using FFmpeg. All these editors cater to different needs, so be sure to try them out, understand your requirements, and use the right one for your project!

Also read: