Free Ways To Split Video For Whatsapp Status On All Platforms

WhatsApp Status is a unique feature that allows you to post an image, video, text, or animated video, all of which will be deleted after 24 hours, on your mobile device. As long as each video is no longer than thirty seconds, you can choose to post numerous videos at once. So, if you have been looking for free ways to split video for WhatsApp on all platforms, this article is for you. It provides you with the best video editors for trimming videos for WhatsApp statuses on the Google Play Store and Apple Appstore.

1. Android Devices
2. iOS Devices
3. WhatsApp’s inbuilt Function

• How to use other Apps to split and edit videos for WhatsApp status

1. Android App
2. iOS App

• How to split and edit videos online for WhatsApp status

How to usePhone’s built-in function to split videos for Whatsapp status

When the length of your intended videos on WhatsApp status is more than thirty seconds, you have a few choices: to cut or split them up into smaller pieces.

Android Devices

You do not require a third-party app to split or trim your videos however you see fit. If You are making use of an Android device, be sure to follow each of the procedures below very carefully:

• On your Android device, launch the app known as Gallery.
• Tap on the video you want to trim or split into segments.
• Go to the bottom of your device and tap the ‘edit’ button.

• When you go to the next screen, you can adjust the sliders to include your desired footage on the next screen.
• Proceed to save the clip by tapping the ‘Save’ button in the screen’s upper-right corner.

Please note that the feature’s availability depends on the Android device manufacturer, Although most Android devices have the inbuilt feature.

iOS Devices

Using the Photos app, you can modify the length of your videos from your iPhone, Mac, or iPad. You can modify your video’s start and finish times using the Photos app, allowing you to create a shorter clip. You can accomplish this by carefully following the procedures that are mentioned below:

• Launch the Photos app, then select the video clip you wish to edit from the gallery.
• Tap on the ‘edit’ button.

• To adjust the beginning and end times of the video, simply move the sliders on either side of the timeline. Tap on the ‘play’ button to see a preview of the video that you have trimmed.
• Tap “Done,” and then tap “Save Video“ or “Save Video as New Clip.”

WhatsApp Inbuilt Function

You can use WhatsApp’s built-in trimming feature when you want to upload videos on WhatsApp status longer than thirty seconds. It’s effortless and straightforward to trim and split the video this way. To do this, carefully follow the steps below:

• Launch the WhatsApp application on your mobile device.
• Then select the Status button from the menu that appears.
• After that, navigate to the top of the page and select the My Status
• Now add the video you intend to use as a status update from the gallery on your phone.
• A slider will display at the top of your device as soon as the video is chosen to play. Slide this bar to the left or right to select a thirty-second segment of the video to be used.
• You can choose to adjust the position of the slider to cut off either the beginning or the end of the clip as necessary.
• You may also decide to add text to the video by utilizing the icons at the top of the screen of your device, cropping the area, and adding stickers or emojis to your creation.
• Now click the “Send“ icon once the video has been shortened to precisely 30 seconds, and it will be uploaded immediately as your status.

How to use Other Apps to split and edit video for Whatsapp status

You can choose to split or trim your videos using one of several third-party apps that are readily available. You can look into downloading these apps from either Google Play Store or the App Store, depending on the type of device you have.

Android Apps

There are many 3rd-party apps available for Android that extend the functionality of popular official apps. Fortunately, many video splitting and trimming apps are accessible from the Google Play Store, so you may choose the one that best suits your needs. However, we have compiled a selection of Apps for your consideration.

Filmora – This app allows you to split up large videos into thirty-second segments or any desired length and post them as a single story. Splitting videos to update your Whatsapp status doesn’t require using different apps. Video Splitter allows you to split your videos and share them to Facebook, Twitter, Instagram, and other social media accounts directly from your desktop.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Crop, Cut & TrimVideo Editor - This program makes trimming and cropping easier. It’s also possible to enhance the colors and blur the video, just like in Photoshop. Easy-to-use controls allow you to quickly crop, blur, or cut any area of a video you’d like.

Easy Video Cutter – Here is another video splitter app that does the required task well. It is an editing tool without a watermark in edited videos. Its main features are to cut videos, merge videos, and extract MP3.

Other apps are Video Editor & Maker, Story Video Cutter, Easy Video cutter PRO and lots more.

iOS App

On the other hand, the Apple App Store does not contain nearly as many third-party applications as the Google Play Store does. However, there are still certain apps capable of doing the job reasonably well.

Video Cutter and Clip Splitter - With this app, you can effortlessly cut and split your large videos into smaller segments and just keep what you need. When the video is in the desired position, you may easily split it into segments by pressing the split button.

Cut, Trim, Split Video Editor – You can simply Cut/Delete undesired bits of a video using this app. You can use the right frames to trim your video clips, cut them in half, and save them as two separate pieces. It has an extra feature that allows you to import your videos from Cloud and via Wi-Fi.

Other Apps in the App Store are VidTrim, Video Splitter, and lots more.

How to use Online Sites to split videos for Whatsapp status

There are numerous video splitter web programs available on the internet. These programs provide a very basic and easy way to trim any small video file. You don’t need to install anything, as they operate from your browser. The tool is made so that you can move two markers that let you choose where the videos start and end.

Are you looking for a web app that can provide you with a quick video editing solution? Then this online video splitter is what you require. This video cutter supports nearly every format, including MP4, AVI, MPG, MOV, and VOB. The application provides extensive security for your files. Your files are protected to a great extent by this web app as well.

Video Cutter Online - This online tool splits your video into pieces and is an excellent solution for editing any short video file. This program, on the other hand, does not require any installation. Not only can you split videos with this tool, but you can also decide to frame them to your liking and modify the frame proportion.

Split Video – If you are ever tired of having to deal with splitting large or lengthy video files, then this web app is designed for you. This is one of the best online tools for splitting video and audio. With an easy-to-use interface, this app gives you an effective way to split your videos online for free.

Other online tools are Ezgif, Kapwing, Apowersoft Split Video Online, and lots more.

Conclusion

So there you have it, the best free ways to split video for WhatsApp on all platforms. It is essential to point out that while third-party mobile apps are easy to use, you risk becoming irritated by unfriendly interfaces and unwanted advertisements if you choose to download and use them. But it must be acknowledged that third-party video editing applications can be helpful in giving videos more possibilities. The built-in function on smartphone devices and the WhatsApp app will always be more reliable than third-party apps for splitting, trimming, and cutting small videos. So, while these apps are adequate for basic splitting and trimming, they do not provide advanced editing features. Nevertheless, if you need more advanced features, employing the tools available online is the best option.

• Android App
• iOS App
• How to split and edit videos online for WhatsApp status

How to usePhone’s built-in function to split videos for Whatsapp status

When the length of your intended videos on WhatsApp status is more than thirty seconds, you have a few choices: to cut or split them up into smaller pieces.

Android Devices

You do not require a third-party app to split or trim your videos however you see fit. If You are making use of an Android device, be sure to follow each of the procedures below very carefully:

• On your Android device, launch the app known as Gallery.
• Tap on the video you want to trim or split into segments.
• Go to the bottom of your device and tap the ‘edit’ button.

• When you go to the next screen, you can adjust the sliders to include your desired footage on the next screen.
• Proceed to save the clip by tapping the ‘Save’ button in the screen’s upper-right corner.

Please note that the feature’s availability depends on the Android device manufacturer, Although most Android devices have the inbuilt feature.

iOS Devices

Using the Photos app, you can modify the length of your videos from your iPhone, Mac, or iPad. You can modify your video’s start and finish times using the Photos app, allowing you to create a shorter clip. You can accomplish this by carefully following the procedures that are mentioned below:

• Launch the Photos app, then select the video clip you wish to edit from the gallery.
• Tap on the ‘edit’ button.

• To adjust the beginning and end times of the video, simply move the sliders on either side of the timeline. Tap on the ‘play’ button to see a preview of the video that you have trimmed.
• Tap “Done,” and then tap “Save Video“ or “Save Video as New Clip.”

WhatsApp Inbuilt Function

You can use WhatsApp’s built-in trimming feature when you want to upload videos on WhatsApp status longer than thirty seconds. It’s effortless and straightforward to trim and split the video this way. To do this, carefully follow the steps below:

• Launch the WhatsApp application on your mobile device.
• Then select the Status button from the menu that appears.
• After that, navigate to the top of the page and select the My Status
• Now add the video you intend to use as a status update from the gallery on your phone.
• A slider will display at the top of your device as soon as the video is chosen to play. Slide this bar to the left or right to select a thirty-second segment of the video to be used.
• You can choose to adjust the position of the slider to cut off either the beginning or the end of the clip as necessary.
• You may also decide to add text to the video by utilizing the icons at the top of the screen of your device, cropping the area, and adding stickers or emojis to your creation.
• Now click the “Send“ icon once the video has been shortened to precisely 30 seconds, and it will be uploaded immediately as your status.

How to use Other Apps to split and edit video for Whatsapp status

You can choose to split or trim your videos using one of several third-party apps that are readily available. You can look into downloading these apps from either Google Play Store or the App Store, depending on the type of device you have.

Android Apps

There are many 3rd-party apps available for Android that extend the functionality of popular official apps. Fortunately, many video splitting and trimming apps are accessible from the Google Play Store, so you may choose the one that best suits your needs. However, we have compiled a selection of Apps for your consideration.

Filmora – This app allows you to split up large videos into thirty-second segments or any desired length and post them as a single story. Splitting videos to update your Whatsapp status doesn’t require using different apps. Video Splitter allows you to split your videos and share them to Facebook, Twitter, Instagram, and other social media accounts directly from your desktop.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Crop, Cut & TrimVideo Editor - This program makes trimming and cropping easier. It’s also possible to enhance the colors and blur the video, just like in Photoshop. Easy-to-use controls allow you to quickly crop, blur, or cut any area of a video you’d like.

Easy Video Cutter – Here is another video splitter app that does the required task well. It is an editing tool without a watermark in edited videos. Its main features are to cut videos, merge videos, and extract MP3.

Other apps are Video Editor & Maker, Story Video Cutter, Easy Video cutter PRO and lots more.

iOS App

On the other hand, the Apple App Store does not contain nearly as many third-party applications as the Google Play Store does. However, there are still certain apps capable of doing the job reasonably well.

Video Cutter and Clip Splitter - With this app, you can effortlessly cut and split your large videos into smaller segments and just keep what you need. When the video is in the desired position, you may easily split it into segments by pressing the split button.

Cut, Trim, Split Video Editor – You can simply Cut/Delete undesired bits of a video using this app. You can use the right frames to trim your video clips, cut them in half, and save them as two separate pieces. It has an extra feature that allows you to import your videos from Cloud and via Wi-Fi.

Other Apps in the App Store are VidTrim, Video Splitter, and lots more.

How to use Online Sites to split videos for Whatsapp status

There are numerous video splitter web programs available on the internet. These programs provide a very basic and easy way to trim any small video file. You don’t need to install anything, as they operate from your browser. The tool is made so that you can move two markers that let you choose where the videos start and end.

Are you looking for a web app that can provide you with a quick video editing solution? Then this online video splitter is what you require. This video cutter supports nearly every format, including MP4, AVI, MPG, MOV, and VOB. The application provides extensive security for your files. Your files are protected to a great extent by this web app as well.

Video Cutter Online - This online tool splits your video into pieces and is an excellent solution for editing any short video file. This program, on the other hand, does not require any installation. Not only can you split videos with this tool, but you can also decide to frame them to your liking and modify the frame proportion.

Split Video – If you are ever tired of having to deal with splitting large or lengthy video files, then this web app is designed for you. This is one of the best online tools for splitting video and audio. With an easy-to-use interface, this app gives you an effective way to split your videos online for free.

Other online tools are Ezgif, Kapwing, Apowersoft Split Video Online, and lots more.

Conclusion

So there you have it, the best free ways to split video for WhatsApp on all platforms. It is essential to point out that while third-party mobile apps are easy to use, you risk becoming irritated by unfriendly interfaces and unwanted advertisements if you choose to download and use them. But it must be acknowledged that third-party video editing applications can be helpful in giving videos more possibilities. The built-in function on smartphone devices and the WhatsApp app will always be more reliable than third-party apps for splitting, trimming, and cutting small videos. So, while these apps are adequate for basic splitting and trimming, they do not provide advanced editing features. Nevertheless, if you need more advanced features, employing the tools available online is the best option.

Create Kinetice Typography Text Effect in Filmora

Preparation

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Go ahead and download the Filmora video editor before all else. The program will install and start automatically. Just hit “Download” and then “Install”.

Step 2

Once the program starts, open a New Project. Then, go to “Sample Color” and drag any color you want to the Timeline.

Step 3

Now, head over to the “Titles” tab and drag the Basic Title to the Timeline. Place it above the Sample Color clip.

Step 4

Right-click on the Title clip in the Timeline and select Edit Properties from the menu. From there, click on “ADVANCED” to open the advanced settings. Here, you can change the font, adjust the text size, and place your titles wherever you want on the screen.

Step 5

Now, start with the second text layer from the bottom and move it 5 frames forward. Move each text layer above 5 layers forward from the previous layer. This will display each word a few milliseconds after the previous one.

When you’re done, click OK.

Step 6

Export the Timeline to save your text animation as a new clip.

Step 7

Now, delete all the clips from the Timeline and import the text video you just exported. Drag it to the Timeline.

Step 8

Right-click on the clip in the Timeline and go to Edit Properties.

Step 9

Click on the Animation tab. Then, go to the Customize tab. Here, change the Scale setting to 120%.

Step 10

Next, move the Playhead to the end of the clip in the timeline. Then, reset the Scale and click OK.

Step 11

Watch the final preview. Then, Render and Export the video and you’re done. Congratulations.

Summary

What you’ve learned:

• How to create a kinetic movement effect on text in Filmora
• How to adjust the scale of a video in Filmora
• Adjust and manipulate text layers

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Go ahead and download the Filmora video editor before all else. The program will install and start automatically. Just hit “Download” and then “Install”.

Step 2

Once the program starts, open a New Project. Then, go to “Sample Color” and drag any color you want to the Timeline.

Step 3

Now, head over to the “Titles” tab and drag the Basic Title to the Timeline. Place it above the Sample Color clip.

Step 4

Right-click on the Title clip in the Timeline and select Edit Properties from the menu. From there, click on “ADVANCED” to open the advanced settings. Here, you can change the font, adjust the text size, and place your titles wherever you want on the screen.

Step 5

Now, start with the second text layer from the bottom and move it 5 frames forward. Move each text layer above 5 layers forward from the previous layer. This will display each word a few milliseconds after the previous one.

When you’re done, click OK.

Step 6

Export the Timeline to save your text animation as a new clip.

Step 7

Now, delete all the clips from the Timeline and import the text video you just exported. Drag it to the Timeline.

Step 8

Right-click on the clip in the Timeline and go to Edit Properties.

Step 9

Click on the Animation tab. Then, go to the Customize tab. Here, change the Scale setting to 120%.

Step 10

Next, move the Playhead to the end of the clip in the timeline. Then, reset the Scale and click OK.

Step 11

Watch the final preview. Then, Render and Export the video and you’re done. Congratulations.

Summary

What you’ve learned:

• How to create a kinetic movement effect on text in Filmora
• How to adjust the scale of a video in Filmora
• Adjust and manipulate text layers

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Go ahead and download the Filmora video editor before all else. The program will install and start automatically. Just hit “Download” and then “Install”.

Step 2

Once the program starts, open a New Project. Then, go to “Sample Color” and drag any color you want to the Timeline.

Step 3

Now, head over to the “Titles” tab and drag the Basic Title to the Timeline. Place it above the Sample Color clip.

Step 4

Right-click on the Title clip in the Timeline and select Edit Properties from the menu. From there, click on “ADVANCED” to open the advanced settings. Here, you can change the font, adjust the text size, and place your titles wherever you want on the screen.

Step 5

Now, start with the second text layer from the bottom and move it 5 frames forward. Move each text layer above 5 layers forward from the previous layer. This will display each word a few milliseconds after the previous one.

When you’re done, click OK.

Step 6

Export the Timeline to save your text animation as a new clip.

Step 7

Now, delete all the clips from the Timeline and import the text video you just exported. Drag it to the Timeline.

Step 8

Right-click on the clip in the Timeline and go to Edit Properties.

Step 9

Click on the Animation tab. Then, go to the Customize tab. Here, change the Scale setting to 120%.

Step 10

Next, move the Playhead to the end of the clip in the timeline. Then, reset the Scale and click OK.

Step 11

Watch the final preview. Then, Render and Export the video and you’re done. Congratulations.

Summary

What you’ve learned:

• How to create a kinetic movement effect on text in Filmora
• How to adjust the scale of a video in Filmora
• Adjust and manipulate text layers

Free Download Free Download

What you need to prepare:

• A computer (Windows or macOS)
• Your video materials.
• Filmora video editor

Free Download Free Download

Step 1

Go ahead and download the Filmora video editor before all else. The program will install and start automatically. Just hit “Download” and then “Install”.

Step 2

Once the program starts, open a New Project. Then, go to “Sample Color” and drag any color you want to the Timeline.

Step 3

Now, head over to the “Titles” tab and drag the Basic Title to the Timeline. Place it above the Sample Color clip.

Step 4

Right-click on the Title clip in the Timeline and select Edit Properties from the menu. From there, click on “ADVANCED” to open the advanced settings. Here, you can change the font, adjust the text size, and place your titles wherever you want on the screen.

Step 5

Now, start with the second text layer from the bottom and move it 5 frames forward. Move each text layer above 5 layers forward from the previous layer. This will display each word a few milliseconds after the previous one.

When you’re done, click OK.

Step 6

Export the Timeline to save your text animation as a new clip.

Step 7

Now, delete all the clips from the Timeline and import the text video you just exported. Drag it to the Timeline.

Step 8

Right-click on the clip in the Timeline and go to Edit Properties.

Step 9

Click on the Animation tab. Then, go to the Customize tab. Here, change the Scale setting to 120%.

Step 10

Next, move the Playhead to the end of the clip in the timeline. Then, reset the Scale and click OK.

Step 11

Watch the final preview. Then, Render and Export the video and you’re done. Congratulations.

Summary

What you’ve learned:

• How to create a kinetic movement effect on text in Filmora
• How to adjust the scale of a video in Filmora
• Adjust and manipulate text layers

Free Download Free Download

How to Convert Images Into Video - Kapwing Tutorial

There are effortless ways to turn images into a video with stylish text and transitions, plus licensed music for any occasion. Simply add your photos to our online video creation software and quickly rearrange your pictures to tell your story. Drag and drop your way to a stunning video in minutes. Which software can help you? Find it in this article.

Part 1. What is Kapwing?

Kapwing is a collaborative video editing solution designed to help users create creative content online. With Kawing, users can upload, edit and share files with other team members in one place. Just share the link with other users and work on the content together in real-time.

Kapwing allows users to create videos from scratch with Kapwing’s extensive library of pre-made templates, stock content, and assets. Users can add layers of images, videos, and audio to create the desired video. Because Kapwing is a cloud-based solution, all projects and work are automatically saved to the cloud. However, Kapwing only allows the first 3 projects to be free, after that the image or video will be automatically watermarked, and you need to purchase kapwing premium access for the best image or video quality.

Part 2. How to convert image to video with Kapwing?

Easily convert images and GIFs to videos with music and stop scrolling with Kapwing’s image-to-video tool. With kapwing, you can turn your photos into a dynamic slideshow for a presentation or an engaging video for social media and YouTube. Even with minimal editing experience, you can turn a single image into a professional video.

Kapwing supports turning a single image into a video, as well as joining multiple images one by one into a slideshow-style video. With an intuitive timeline and the ability to specify the duration of each image, you won’t need to read a long tutorial to convert an image to a video with this easy online tool. Follow the steps below to convert your images to videos using kapwing.

Step1Upload your image or images

Upload an image or set of images directly to Kapwing. You can also embed a link to a .png or .jpg on the web. Once uploaded, your images will appear on the canvas as a collage.

Step2Select time and size

Select the image and find the duration dropdown in the right edit menu. Use the “adjust duration“ dropdown to choose how long you want your output video to be. You can also resize the image to a different aspect ratio. Crop, add music, set the background color, and more with Kapwing’s simple editor. If you have uploaded multiple images, arrange the photos in the correct order to make the presentation perfect.

Step3Export and share

Just click Export and your final video will be created. The output file is MP4. Kapwing is completely free and requires no downloads. Enjoy the new video you created with your image or images.

Part 3. Other 3 ways to convert image to video online

Even though an online image-to-video maker is not as powerful as photo and video editing software products like Filmora , you can still use this online image-to-video maker to create videos effortlessly. However, to save time, you should prepare all the material you want to use in your video in advance so that you can upload it to the platform of your choice and have your video ready in minutes. Let’s take a look at the image-to-video maker that you can use to create captivating social media videos.

2. Image to video

This website offers a lot of different tools that you can use to create videos from your photos, crop videos, or add 3D transitions between frames. Keep in mind that the maximum number of photos you can use in one video is limited to thirty. Once you get to the home page of this platform, just upload your photos and arrange them in any way you want.

You can also add text, music, or your company logo to the video, then follow the on-screen instructions to complete the process. You can preview the video after the platform has generated it and decide whether you want to download it or start over if you didn’t like the result.

3. Mp3Care

This web application makes converting JPEG files to MP4 video files a simple two-step process that only requires uploading photos and then selecting the time between the two images. The maximum number of photos you can use in a video is limited to just twenty, with the maximum duration of each image in the video not exceeding the 20-second mark. Adding transitions between images is also on the list of options this platform provides, but Mp3 Care Photo to Video lacks any other video editing features. Despite some obvious drawbacks, this online photo-to-video maker is still a great choice if you want to convert your photos to videos quickly and for free.

How to convert image to video on desktop using Filmora

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

First, download and install Filmora on your Windows or Mac computer. In the following section, I will cover how to add photos to a video using Filmora on Windows. The procedure for adding photos to a video on Mac is similar.

Step1Import both photos and video files into Filmora

Launch Filmora Video Editor and click “New Project“ to get started. Click “Import“ and then “Import media files“ or click “Import media files here“ to find your video and photos on your computer. Double-click the files and they will be imported into the program. You can also directly drag and drop photo and video files into the video editing program. Then you need to set up the project such as aspect ratio and resolution.

Step2Add a photo to the video and apply some effects

After importing the files into the program, drag the video clip to the video editor timeline at the bottom of the screen. Then drag the photo to the track above the video. Click the “Play“ icon to preview the video. Move the photo on the track to the point where you want to view it and drag the end to shorten or increase the duration of the photo.

After that, edit your photo as you choose. Place the image anywhere you want, then drag its edge to change the size of the playing windows. The picture-in-picture track can also be customized using a variety of customizable settings provided by Filmora. To access the picture, color, and motion panel, double-click the additional image on the track. Here, you can select from more than 30 motion effects to animate the added photo, alter its saturation and hue, perform some color correction, or alter its transformation.

Then click the “Effects“ button for more mask and effect options. Go to the Utility option under Filters and then drag the image mask onto the photo on the timeline. Double click on the photo and then you can change the shape, height, width, and blending of the image mask. On the mask tab, you can shape the photo with a single click. You can also invert the mask to create a new shape. Choose one of the effects according to your wish to make your video more unique.

Step3Save the new video file

After adding a photo to a video and making basic adjustments, you can export it in various ways by pressing the “Export“ button. You can save it in different formats in the Format tab. If you want to play the video creation on iPod, iPhone, or iPad, click “Device“ and select the device from the list. You can also upload your video directly to YouTube or burn it to DVDs for playback on your TV using a DVD player. You can also share the video directly on social networks.

Conclusion

The above article talks about different software that can convert images to videos, hope it is helpful if you were wondering how to do that. As we can see above, using Filmora video editor, you will be more creative in making videos with fun or using Kapwing online software to convert your images to videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

First, download and install Filmora on your Windows or Mac computer. In the following section, I will cover how to add photos to a video using Filmora on Windows. The procedure for adding photos to a video on Mac is similar.

Step1Import both photos and video files into Filmora

Launch Filmora Video Editor and click “New Project“ to get started. Click “Import“ and then “Import media files“ or click “Import media files here“ to find your video and photos on your computer. Double-click the files and they will be imported into the program. You can also directly drag and drop photo and video files into the video editing program. Then you need to set up the project such as aspect ratio and resolution.

Step2Add a photo to the video and apply some effects

After importing the files into the program, drag the video clip to the video editor timeline at the bottom of the screen. Then drag the photo to the track above the video. Click the “Play“ icon to preview the video. Move the photo on the track to the point where you want to view it and drag the end to shorten or increase the duration of the photo.

After that, edit your photo as you choose. Place the image anywhere you want, then drag its edge to change the size of the playing windows. The picture-in-picture track can also be customized using a variety of customizable settings provided by Filmora. To access the picture, color, and motion panel, double-click the additional image on the track. Here, you can select from more than 30 motion effects to animate the added photo, alter its saturation and hue, perform some color correction, or alter its transformation.

Then click the “Effects“ button for more mask and effect options. Go to the Utility option under Filters and then drag the image mask onto the photo on the timeline. Double click on the photo and then you can change the shape, height, width, and blending of the image mask. On the mask tab, you can shape the photo with a single click. You can also invert the mask to create a new shape. Choose one of the effects according to your wish to make your video more unique.

Step3Save the new video file

After adding a photo to a video and making basic adjustments, you can export it in various ways by pressing the “Export“ button. You can save it in different formats in the Format tab. If you want to play the video creation on iPod, iPhone, or iPad, click “Device“ and select the device from the list. You can also upload your video directly to YouTube or burn it to DVDs for playback on your TV using a DVD player. You can also share the video directly on social networks.

Conclusion

The above article talks about different software that can convert images to videos, hope it is helpful if you were wondering how to do that. As we can see above, using Filmora video editor, you will be more creative in making videos with fun or using Kapwing online software to convert your images to videos.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

How to Add a Slideshow in PowerPoint

How to Add a Slideshow in PowerPoint

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

A slideshow view fills the entire computer screen, much like a real slide show. The presentation is exhibited in full-screen mode, as the audience will see it. Graphics, timings, videos, animated elements, and transition effects get displayed in the same way they appear on stage. PowerPoint is an excellent tool for preparing presentations on the fly, whether for a seminar, classroom, lecture hall, conference, or even a contract pitch. With PowerPoint software, you can never go wrong. We’ll show you how to do a slideshow presentation in this post, even if you’re a complete novice who has never used it before.

In this article

01 How to Add Slideshow in PowerPoint

02 [How to Prepare a slideshow in PowerPoint](#Part 2)

03 [How to Play Slideshow in PowerPoint Automatically](#Part 3)

04 [How to Add Sound to a PowerPoint Slideshow](#Part 4)

05 [How to View Slideshow PowerPoint](#Part 5)

05 [How to Add Audio to the Slideshow](#Part 5)

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

To make the slideshow loop continuously, go to the “ set up” group on the “slide show” tap and check the box next to “Loop continuously until Esc .”Then click OK. The slide will start from the beginning after displaying the last slide.

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

You can choose from a variety of slide layouts and visuals. You can select “New Slide” from either “Home” or “Insert.” You may also right-click any slide in the left-hand panel and select “New Slide.” [1]

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Transitions are essential for tying the presentation together and allowing it to flow smoothly from one image to the next. Go to the “Transitions” tab at the top of the bar and experiment with the various possibilities.

Step 8: Add a Background.

If the white space around the edges of your photographs bothers you, right-click on any slide, choose “Format Background,” and then adjust the background fill. You may change the hue, direction, and transparency of a solid fill, a gradient fill, etc. To make your slides look more professional,

Step 9: Save your PowerPoint

Before exiting, save your show once you’ve finished adding photos and graphics. If you named and saved your presentation at the start, all you have to do now is click the flash drive icon in the upper left corner.

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

To place the audio at your desired location in the slide, select and drag the audio icon to where you want it. If you’re going to use numerous audio per slide, it is better to put the voice icon in the same place on the slide to be easily discoverable.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

If you are looking to present your message to a large audience using slideshows, Filmora software has covered you. Whether you’re a professional at making slideshows or a beginner who wants to try it out for the first time, it has an easy-to-use interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Many people use PowerPoint cause of its simplicity, flexible function, easy sharing and conversion, reliability, and vast template library. So, after going through this, you would know how to add slides in PowerPoint and many more.

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

Try It Free Try It Free

A slideshow view fills the entire computer screen, much like a real slide show. The presentation is exhibited in full-screen mode, as the audience will see it. Graphics, timings, videos, animated elements, and transition effects get displayed in the same way they appear on stage. PowerPoint is an excellent tool for preparing presentations on the fly, whether for a seminar, classroom, lecture hall, conference, or even a contract pitch. With PowerPoint software, you can never go wrong. We’ll show you how to do a slideshow presentation in this post, even if you’re a complete novice who has never used it before.

In this article

01 How to Add Slideshow in PowerPoint

02 [How to Prepare a slideshow in PowerPoint](#Part 2)

03 [How to Play Slideshow in PowerPoint Automatically](#Part 3)

04 [How to Add Sound to a PowerPoint Slideshow](#Part 4)

05 [How to View Slideshow PowerPoint](#Part 5)

05 [How to Add Audio to the Slideshow](#Part 5)

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

To make the slideshow loop continuously, go to the “ set up” group on the “slide show” tap and check the box next to “Loop continuously until Esc .”Then click OK. The slide will start from the beginning after displaying the last slide.

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

You can choose from a variety of slide layouts and visuals. You can select “New Slide” from either “Home” or “Insert.” You may also right-click any slide in the left-hand panel and select “New Slide.” [1]

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Transitions are essential for tying the presentation together and allowing it to flow smoothly from one image to the next. Go to the “Transitions” tab at the top of the bar and experiment with the various possibilities.

Step 8: Add a Background.

If the white space around the edges of your photographs bothers you, right-click on any slide, choose “Format Background,” and then adjust the background fill. You may change the hue, direction, and transparency of a solid fill, a gradient fill, etc. To make your slides look more professional,

Step 9: Save your PowerPoint

Before exiting, save your show once you’ve finished adding photos and graphics. If you named and saved your presentation at the start, all you have to do now is click the flash drive icon in the upper left corner.

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

To place the audio at your desired location in the slide, select and drag the audio icon to where you want it. If you’re going to use numerous audio per slide, it is better to put the voice icon in the same place on the slide to be easily discoverable.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

If you are looking to present your message to a large audience using slideshows, Filmora software has covered you. Whether you’re a professional at making slideshows or a beginner who wants to try it out for the first time, it has an easy-to-use interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Many people use PowerPoint cause of its simplicity, flexible function, easy sharing and conversion, reliability, and vast template library. So, after going through this, you would know how to add slides in PowerPoint and many more.

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

Try It Free Try It Free

A slideshow view fills the entire computer screen, much like a real slide show. The presentation is exhibited in full-screen mode, as the audience will see it. Graphics, timings, videos, animated elements, and transition effects get displayed in the same way they appear on stage. PowerPoint is an excellent tool for preparing presentations on the fly, whether for a seminar, classroom, lecture hall, conference, or even a contract pitch. With PowerPoint software, you can never go wrong. We’ll show you how to do a slideshow presentation in this post, even if you’re a complete novice who has never used it before.

In this article

01 How to Add Slideshow in PowerPoint

02 [How to Prepare a slideshow in PowerPoint](#Part 2)

03 [How to Play Slideshow in PowerPoint Automatically](#Part 3)

04 [How to Add Sound to a PowerPoint Slideshow](#Part 4)

05 [How to View Slideshow PowerPoint](#Part 5)

05 [How to Add Audio to the Slideshow](#Part 5)

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

To make the slideshow loop continuously, go to the “ set up” group on the “slide show” tap and check the box next to “Loop continuously until Esc .”Then click OK. The slide will start from the beginning after displaying the last slide.

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

You can choose from a variety of slide layouts and visuals. You can select “New Slide” from either “Home” or “Insert.” You may also right-click any slide in the left-hand panel and select “New Slide.” [1]

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Transitions are essential for tying the presentation together and allowing it to flow smoothly from one image to the next. Go to the “Transitions” tab at the top of the bar and experiment with the various possibilities.

Step 8: Add a Background.

If the white space around the edges of your photographs bothers you, right-click on any slide, choose “Format Background,” and then adjust the background fill. You may change the hue, direction, and transparency of a solid fill, a gradient fill, etc. To make your slides look more professional,

Step 9: Save your PowerPoint

Before exiting, save your show once you’ve finished adding photos and graphics. If you named and saved your presentation at the start, all you have to do now is click the flash drive icon in the upper left corner.

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

To place the audio at your desired location in the slide, select and drag the audio icon to where you want it. If you’re going to use numerous audio per slide, it is better to put the voice icon in the same place on the slide to be easily discoverable.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

If you are looking to present your message to a large audience using slideshows, Filmora software has covered you. Whether you’re a professional at making slideshows or a beginner who wants to try it out for the first time, it has an easy-to-use interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Many people use PowerPoint cause of its simplicity, flexible function, easy sharing and conversion, reliability, and vast template library. So, after going through this, you would know how to add slides in PowerPoint and many more.

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

Try It Free Try It Free

A slideshow view fills the entire computer screen, much like a real slide show. The presentation is exhibited in full-screen mode, as the audience will see it. Graphics, timings, videos, animated elements, and transition effects get displayed in the same way they appear on stage. PowerPoint is an excellent tool for preparing presentations on the fly, whether for a seminar, classroom, lecture hall, conference, or even a contract pitch. With PowerPoint software, you can never go wrong. We’ll show you how to do a slideshow presentation in this post, even if you’re a complete novice who has never used it before.

In this article

01 How to Add Slideshow in PowerPoint

02 [How to Prepare a slideshow in PowerPoint](#Part 2)

03 [How to Play Slideshow in PowerPoint Automatically](#Part 3)

04 [How to Add Sound to a PowerPoint Slideshow](#Part 4)

05 [How to View Slideshow PowerPoint](#Part 5)

05 [How to Add Audio to the Slideshow](#Part 5)

Part 1 How to Add Slideshow in PowerPoint

Below are the steps on how to prepare a slideshow in PowerPoint

Step 1: Open New

Click on open new presentation in Microsoft PowerPoint.

Step 2: Add Photo

Add a new photo album to your presentation.

Step 3: Add Transition

Customize your presentation by adding transitions and effects to your slideshow.

Step 4: Advanced Settings

Set the slides to advance automatically.

Step 5: Set Slideshow Loop

To make the slideshow loop continuously, go to the “ set up” group on the “slide show” tap and check the box next to “Loop continuously until Esc .”Then click OK. The slide will start from the beginning after displaying the last slide.

Now, your slideshow has been created and is ready for viewing.

Part 2 How to Prepare Slideshows in PowerPoint

Learning how to do a slideshow in PowerPoint is a relatively simple process that anyone can accomplish.

Ready to make aslideshow? Let us get you started.

Step 1: Create New Presentation

To do so:

● Go to your browser and click on the PowerPoint icon.

● When PowerPoint opens, go to the upper left-hand corner and choose “File,” then “New,” listed under “File.”

● Choose “New Presentation” from the drop-down menu, which will create a new slide show for you to begin uploading photos to.

Step 2: Save PowerPoint

Go to the top right-hand side of the presentation screen and click on the flash drive icon. After that, you’ll be able to name your presentation and pick where to save it.

Remember to save your presentation after something that will remind you of the images in the File. This act will make it easier for you to find them later.

Step 3: Name the Page

Consider a title and type it in the box. Your title page can include a name, date, or image.

Choose an image-friendly arrangement, such as a slide with a title box and an image box, a slide with only an image box, or even a blank slide.

Step 4: Add Slides

You can choose from a variety of slide layouts and visuals. You can select “New Slide” from either “Home” or “Insert.” You may also right-click any slide in the left-hand panel and select “New Slide.” [1]

Step 5: Import Images

You have the option add one or multiple pictures to each slide. It’s all up to you. Double-click inside the picture box (or select Insert > Picture > From File from the Insert menu) and click OK.

Step 6: Rearrange the Photo

You will find it easier to decide the optimum order for the slides if you use the slide sorter.

Bear the bottom of the image pane, and look for the “Slide Sorter” button. Then, using your mouse, drag the slides to their preferred locations.

Step 7: Add Transitions

Transitions are essential for tying the presentation together and allowing it to flow smoothly from one image to the next. Go to the “Transitions” tab at the top of the bar and experiment with the various possibilities.

Step 8: Add a Background.

If the white space around the edges of your photographs bothers you, right-click on any slide, choose “Format Background,” and then adjust the background fill. You may change the hue, direction, and transparency of a solid fill, a gradient fill, etc. To make your slides look more professional,

Step 9: Save your PowerPoint

Before exiting, save your show once you’ve finished adding photos and graphics. If you named and saved your presentation at the start, all you have to do now is click the flash drive icon in the upper left corner.

Now your Powerpoint is ready to be displayed, and you can also view your slideshow automatically. Read the next part for details.

Part 3 How to Play Slideshow in PowerPoint Automatically

Before you can play a slideshow automatically**,** you have to make sure to save the presentation.

This is how to play a slideshow automatically in PowerPoint. Follow these simple steps, and your slideshow will auto-play when you double-click it.

Step 1: Save File and Visit More Option

After creating your slideshow, select file,” save as,” or “save as a copy.” Click on More options.

Step 2: Save in Desired Folder

Reach the folder where you want to save your presentation.

Step 3: Name your Presentation

Type a name for your presentation in the file name box

Step 4: Select Format

Select PowerPoint slideshow under the Save as type. This indicates what format you want to save your presentation as.

Save the File as a .ppsx file. After saving, double click the File, and it will open up as a slideshow.

Now, you can automatically play your slideshow on PowerPoint.

Part 4 How to Add Sound to a PowerPoint Slideshow

Sounds make your PowerPoint presentation more lively. Sound helps to widen your audience’s attention span. If you want your presentation to have sound:

Open your presentation and click the slide to which you want to add a sound. Then, visit the Insert tab, click on the Media group, and select the arrow under Audio.

Now, from the list displayed, click Audio from File. Locate the Audio you want to use and then select the audio clip you want.

Finally, click Insert.

Your audio icon and controls will appear on the slide.

Part 5 How to View Slide Show in PowerPoint

Viewing an already created slideshow in PowerPoint is easy. Following these steps below, you will be able to do it without stress.

Step 1: Open your PowerPoint presentation.

Open and go to the bottom of the PowerPoint window and click on the view slideshow command.

Step 2: Visit the More Options Tab

Navigate to the slideshow tab on the ribbon to access even more options.

Step 3: Start your Presentation

You can start the presentation from here and view the current slide.

Thus, that is how you can video slideshow in Microsoft PowerPoint

Now, we will move on to adding sound to your Slideshow to make it more attractive.

Part 6 How to Add Audio to a Slideshow

You can add audio, music, narration, and soundbites to your PowerPoint presentation. But to record and hear any audio, the computer you are using must have a sound card, microphone, and speakers.

To add audio from your computer:

Step 1: Select insert

Select audio on your computer.

Step 2: Select Desired Audio

An insert audio dialog box will pop up. Select the desired audio file and click insert.

To record audio

Step 1: Select Record Audio

Select insert>Audio> record audio

Step 2: Name Audio

Type in the name you want your audio file to be saved as.

Step 3: Start Recording

Select the record and start speaking.

Step 4: Review Recordings

Select a stop and then play to listen to and review your recording.

If you arent satisfied, you can select a record to re-record your audio or click OK if you are satisfied.

To place the audio at your desired location in the slide, select and drag the audio icon to where you want it. If you’re going to use numerous audio per slide, it is better to put the voice icon in the same place on the slide to be easily discoverable.

Note that you must enable a microphone on your device to start recording audio.

● Bonus Tip with Wondershare Filmora Video Editor

If you are looking to present your message to a large audience using slideshows, Filmora software has covered you. Whether you’re a professional at making slideshows or a beginner who wants to try it out for the first time, it has an easy-to-use interface.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

● Filmora software also creates photo and video slideshows and can add music, texts, filters, different transition effects, and even animation to your slideshow.

● Many tools can help you create these kinds of videos, and Filmora is one of the best in them with its latest upgrade.

● Its ready-to-use templates and unique features, like split-screen, freeze-frame, etc., make it one of the best slideshow makers.

● The Filmora software has the flexibility to suit whatever kind of slideshow you want to make, whether it is a photo slideshow or video slideshow.

● Ending Thoughts →

● Many people use PowerPoint cause of its simplicity, flexible function, easy sharing and conversion, reliability, and vast template library. So, after going through this, you would know how to add slides in PowerPoint and many more.

● Thus, we believe creating a slideshow in PowerPoint is now a bit easier with this guide to walk you through it.

Also read: